The CU-600 is a partial modular power supply that lets you select the cables you need while powering your system at a healthy 600 watts. Everyone likes a clean and easy installation. This power supply allows you to keep what you want and remove what you don t. While necessary connectors like the 20+4 pin power connector are attached to the unit you decide which of the others should stay. Customize your power supply to reflect your system. PCIe Connector ready (1) 6pin. Automatic fan setting for most effective cooling system. Native and modular cables for a clean and easy installation and cable management. High efficiency above 80 percent. Great balance between cooling and noise level. 120mm silent fan design. All output cables with nylon sleeving. ATX 12V V2.2/EPS 12V V2.91. Over voltage... Less

The Voltas 600Watt is ideal for PC builders seeking power reliability and efficiency. ATX12V 2.2 circuit delivers clean and stable power with increased amperage on the 12-volt lines. Low turbulence 12cm fan draws cooler air into the case with minimum noise. Crossfire and SLI ready. ATX12V v2.2 compliant. +3.3V and +5V combined load 262W. +12V combined load 264W. Energy efficient (>73% @ typical load). Ultra quiet 12cm fan. Protection against over power over voltage and short circuit. Crossfire and SLI ready. Case color: Gray. ATX compliance: ATX12V v2.2. +12V rails: 2. Power provided: 600W. Peripheral connectors: 6 x Peripherals (4pin); 4 x SATA (15pin); 1 x Floppy drive (4pin). Motherboard connectors: 1 x Main connector (20+4pin); 1 x 12V+ P4 (4pin). PCI-Express connectors: 2 x PCI-E... Less

The improved Voltas X offers higher performance and lower noise well-suited for today s systems. The cables are fully sleeved for easy routing and improved airflow. Additional filtering circuits provide tighter voltage regulation (+/-5%) for stable output even during peak loads. Ultra quiet 12cm blue LED fan keeps your PC well ventilated with minimum noise. Crossfire and SLI ready. ATX12V v2.2 compliant. Tight voltage regulation (+/-5%) on all rails. +3.3V and +5V combined max load 262W. +12V combined max load 264W. Ultra quiet 12cm LED fan (blue). Fully sleeved cables for improved airflow. Protection against over power over voltage and short circuit. Case color: Black. ATX compliance: ATX12V v2.2. +12V rails: 2. Power provided: 600W. Peripheral connectors: 6 x Peripherals (4pin); 4 x... Less

Specification Mfr Part Number: ATX-350PN-B204 Features: Complied with ATX12V 2.0 standard High efficiency Low noise and ripple and reliability Remote On/Off function Internal 12V DC 120mm fan included Noise Killer (Thermal fan speed control function) Complies with FCC part 15 subpart J Class B and CISPR 22 Class B Output over voltage short circuit and over current protection 100% Hi-pot ATE and burn-in tested Re-settable power shut down Approved by UL 60950 TUV IEC 60950 NEMKO + CB Report With 20pin and SATA connectors Input: Input Range: 100 132 Vrms or 200 264 Vrms manual selection Frequency: 47 63 Hz Input Current: 8A (RMS) @ 115Vrms/60Hz 4A (RMS) @ 230Vrms/50Hz Inrush Current: 100A Max cold start 120A Max warm start measured at 264Vrms/50Hz Output: Total Watts: 350 W +3.3V and +5V... Less

Input range: 90132V or 180V264Vac. Frequency: 4763Hz. Input Current:400W 10A/6A @ 115/230 Vac. Efficiency: 65% at full load nominal line. Proprietary IC and unique design. Embedded thermal sensor. Dual low. noise variable fan. Various safety protection. OCP(over. current) OVP(over. voltage) SCP(short. circuit) UVP(under. voltage) OPP(over. power). 20+4. pin MB connector. 4Pin +12V connector x 1. Peripheral power connector x 3. Serial ATA connector x 2. Floppy power connector x 1. Model: AL. A400ATX/SL. 8400BTX. PSU: ATX12V Version 2.2. Dimension: 5.5 D x 6.0 W x 3.3 H. Cooling: 2 x 80mm Ball Bearing Fan. MTBF: 50 000 Hours. Approval: UL CSA FCC.

Specification Mfr Part Number: ATX-450PN-B204 Features: High efficiency Low ripple & noise Output over voltage protection Short circuit protection on all outputs Resettable power shut down 100% burn-in under high ambient temperature (50°C) Total Power: 450 W Type: ATX from factor 12V V2.2 Input: Voltage: 110 120V / 220 240V Frequency: 50/60 Hz Input current: 10/5 Amps Output: +3.3V @ 22A; +5V @ 15A; +12V1 & +12V2 @ 18A; -12V @ 0.3A; +5VSB @ 2.5A +3.3V & +5V total output not exceed 145W +12V1 & +12V2 total output not exceed 360W Power good signal: 115V / 230V (full load) 100 500 ms Protection: Over-voltage (OVP) Over-current (OCP) Short circuit (SCP) Fan: 1x 120mm DC fan MTBF: 100 000 hours Connectors: 1x 20+4pin Main Connector; 1x 8pin ESP12V CPU Connector; 2x 6pin PCI-Express Connectors;... Less

Specification Mfr Part Number: ATX-400PN-B204 Features 20/24pin Main Power connector; SATA connector Complied with ATX12V 2.0 standard High efficiency and reliability Remote On/Off function Internal 12V DC 120mm Ball Bearing fan included Noise Killer (Thermal fan speed control function) Low noise and ripple Complies with FCC part 15 subpart J Class B and CISPR 22 Class B Output over voltage short circuit and over current protection 100% Hi-pot ATE and burn-in tested Re-settable power shut down Approved by UL 60950 IEC 60950 TUV EN60950 NEMKO (CB Report) Input: Input Range: 100 132 Vrms or 200 264 Vrms Manual selection Frequency: 47 63 Hz Input Current: 8.5A (RMS) @ 115Vrms/60Hz 5A (RMS) @ 230Vrms/50Hz Inrush Current: 100A Max cold start 120A Max warm start measured at 264Vrms/50Hz Output:... Less

This ATX12V power supply is a 250W PS2 Form Factor five output unit with remote on/off UL CSA CE TUV approvals. Original HP part number 5187-1098 used in many Pavilion and Presario computers. Airflow drawn out of case into surroundings by 80mm internal fan. Built-in power status LED above AC inlet. Product also suitable for HP part numbers 0950-2700 0950-3971 5183-6914 and 5188-2622. Bestec model ATX-250-12Z Rev. D. Category: Power Supply. Type: OEM ATX12V. Dimensions: 140L x 150W x 86H mm (Dimensions US: 5.5 x 5.9 x 3.4 ). Safety: UL CSA TUV CE. Efficiency: 68% minimum at full load. Reliability: > 50K hours at 25C ambient conditions. AC Input: 115/230VAC selectable 6/3A 47-63HZ. DC Outputs (Amps Max/Min): +3.3V (18/0.3A) +5V (25/0.5A) +12V (14/0.0A) -12V (0.8/0.0A) +5VSB (2.0/0.0A). DC... Less

This 630 Watt Modular Power Supply is 80 Plus certified making it suitable as an energy efficient replacement/upgra de power supply for desktop PCs. This ATX12V PSU features Active Power Factor Correction and 20/24-pin motherboard support to deliver the flexibility needed to support AMD or Intel CPU-based entry-level servers and high-end workstations while providing stable power and maximum energy efficiency. Compliant with ATX12V 2.3 standards this EPS12V 2.91 power supply offers four 12V power rails an 8-pin EPS connector and a modular cable design enabling you to choose the connectors you require based on your system configuration. The power supply also features a 120mm fan for quieter more efficient cooling in demanding systems. This higher level 630 Watt ATX12V 2.3 EPS12V power... Less

This is the ideal solution for delivering stable power to the most demanding devices. You can rest assured that this power supply will be as dependable as you need it to be. Compatibility with existing standards as well as a generous number of accessory connectors to maximize your configuration possibilities. Automatic temperature- controlled fan keeps the power supply quiet during low power demand. High performance components and connectors are designed for extra long life and provide maximum system performance improves system reliability by providing stable power to all components.

Summary: This powerful power supply deliver 800Watts true power to meet today s high-end system requirements. Silent and heat resistant dual fans with smart temperature and automatic fan speed control. It supports Core 2 Dual and Quad Core Processors. Nvidia Sli and Quad SLi is compatible. Dual EPS-12V output support Intel Skulltrail platform systems. This 800W power is for new OEM PC and server assemblies including MiniServers and rackmount servers. It supports both 20- or 24-pin ATX v.2.2 and EPS-12V Xeon motherboards. It also includes four PCI Express 6pin/8pin connectors for Multi-GPU graphic card which can supply power to advanced Graphics cards require Dual 6pin or Dual 8pin. ACTIVE PFC Auto switch is built-in. This power supply supports Intel Skulltrail and Core i7 platform... Less

A reliable upgrade or replacement power supply for desktop PCs. This power supply offers an upgrade or replacement to a variety of Intel or AMD-based ATX desktop computer systems. Compliant with the industry standard ATX specification and using the standard ATX form-factor this power supply (PSU) can be used as a replacement in a variety of popular OEM desktop systems. Conforming to ATX revision 2.03 this power supply features a 20-pin ATX power connector and 6-pin AUX power connector for support for older legacy computer systems as well as some newer low powered systems with it s ATX12V connector. High quality components and a built in 80mm cooling fan lend to a durable and reliable power supply.

MODEL- A608BS450 VENDOR- ATHENATECH FEATURES- Black ATX Mid-Tower Case- BLACK Modern and attractive front panel designs multi-media and USB modular ports release the trouble-free front panel by pressing back the plastic hook at the bottom 12cm rear fan included for better air flow 8/9/12cm fan openings in the front for future cooling improvement 8cm fan duct and I/O ventilation included for Intel Prescott CPU.* Tool-less drive bay for easy installation* Removable HDD cage* Screw-less door locks and pad lock design -- SPECIFICATIONS ----------------- ----------------- -MOTHERBOARD - ATX Micro ATXDRIVE BAYS - EXTERNAL: (4) 5.25" Drive Bays (1) 3.5" Drive Bays INTERNAL:... Less

Summary: This powerful power supply deliver 850Watts true power to meet today s high-end system requirements. Silent and heat resistant dual fans with smart temperature and automatic fan speed control. It supports Core 2 Dual and Quad Core Processors. Nvidia Sli and Quad SLi is compatible. Dual EPS-12V output support Intel Skulltrail platform systems. This 850W power is for new OEM PC and server assemblies including MiniServers and rackmount servers. It supports both 20- or 24-pin ATX v.2.2 and EPS-12V Xeon motherboards. It also includes four PCI Express 6pin/8pin connectorsfor Multi-GPU graphic card which can supply power to advanced Graphics cards require Dual 6pin or Dual 8pin. ACTIVE PFC Auto switch is built-in. This power supply supports Intelr Skulltrail and Core i7 platform... Less

Features:. Easy to check ATX power supply. Aluminum case. Accurate voltage indicator +/- 0.1V (+12V1/+5V/+3. 3V/5VSB/+12V2/- 12V). ATX P.G. value display. Lower or higher P.G. values alarm. ATX output connectors check. Lower voltage detected alarm. Over voltage alarm. No voltage detected alarm. Manual:. Plug-in your ATX power 24 pin and plug-in (P4/P6/P8) into the tester. Turn on your ATX power supply. LCD shows each voltage and P.G. value on the screen automatic and you can hear 2 beep sounds. ATX power output connector checking one by one. If power output is working the LED will light on. If power output failed the LED will not light on. Plug-in (HDD/Floppy) connector and check LED light (+12V1/+5V). Plug-in Sata connector and check LED light (+12V1/+5V+3. 3V). Remove the connector... Less

This 400 Watt professional- grade power supply is the perfect upgrade or replacement for powering your PC. This is the perfect solution for delivering stable power to the most demanding devices. High performance components and connectors are designed for extra long life and provide maximum system performance. Premium EMI/RFI power filtration for low noise and ripple this is the perfect solution for delivering stable power to the most demanding devices.

Type: Standard ATX Design Maximum Power: 600W Fans: 1 Dimension: 5.9"(W)x3.4"(H)x5. 5"(D) Main Connector: 20/24-pin x1 (20pin convertible), ATX 4 pin X 1, SATA X 2, Molex 4 pin X 4, Floppy X 1, PCI-Express 6 pin x 1 *Above are all the connectors included in this power supply. your system may not need them all. it is fine to leave unused connectors unplugged. Hold-up Time: 16ms minimum with full load 115 VAC/60 HZ Efficiency: > 70% Over Voltage Protection Over-current protection Over-voltage protection Short circuit protection on all outputs Input Voltage: 100-120 vac / 200-240 vac Input Frequency Range: 50 / 60hz Output: 600 Watt +3.3V 45A, +5V 34A, +12V 22A, -12V 0.8A, +5VSB 2A MTBF: >100,000 Hours (11 years & 2 months) * Excludes the life of the fan Approvals: CE, CB, FCC, CSA **Fan... Less

UL FCC Approval. Reminder: CPU Memory Systems Notebooks and Software products are not returnable for Credit.Condition and terms: A 15 days from date of invoice; during first 7 days no restocking fee will be charged in most cases provided item(s) are returned as new unopened complete and in re-sellable condition. After 7 days a 15% restocking fee will apply.Damage items must be reported to us within 2 business days of receipt. EPower Power Supply EP-600PM 600W ATX12V 2.3 Single 120mm Cooling Fan Bare. Form Factor: ATX12V 2.3. Maximum Wattage: 600W. Single 120 mm Cooling Fan. 75% Efficiency Rating.

This 300-WATT ATX 12V v2.01 PC POWER SUPPLY UNIT is designed according to Intel and AMD power specifications. It features 80mm high-speed cooling fan with thermal sensing technology and noise killer supports Serial ATA power and delivers high-performance power conversion ratio. It is an excellent choice of value and performance for power upgrade or replacement. FSP Quality Assurance Program a manufacturer s direct service guarantees quality and performance for a period of 2-Year included. All FSP OEM models are qualified for RoHS Lead-Free Green Product (G.P) global environmental friendly status. Supports multi-core amd/intel cpu system. 300-watt atx 12v v2.01 for pc. 80mm high-speed cooling fan system with noise killer. Thermal control system linked to fan. Secure on/off power switch... Less

Coolmax CM-300 CM-300 300W Micro ATX Power Supply The CM-300 is perfect for those with smaller computer cases - tiny in size but huge in effectiveness with an anti-corrosive nickel plated chassis. Within this power supply is an 80mm cooling fan designed to cool at maximum efficiency with the lowest noise level. And to power your CPU the CM-300 comes with an 8 pin Xeon connector ready in a tube-tide design to keep all your wires tidy. The CM-300 is the ideal combination of power efficiency in a sleek body kit. Serial ATA Ready. 80mm silent fan design long life noiseless and fastest cooling time. All kinds of protection circuits (OVP/OPP/SCP). Fully supports all Intel & AMD system demands. 20-24pin / 4-8pin adaptors available for both 20pin and 24pin. Tube-tide design to tidy wires... Less

300 Watt Professional ATX Power Supply Upgrade a smaller less capable power supply to this superior 300 watt ATX power supply. With an automatic temperature controlled fan that rotates at 2000 rpm for temperatures above 30 degrees celsius and idles at 500 rpm for temperatures below 18 degrees celsius. The Dual Ball Bearing fan provides unmatched reliability and long life. A superior EMI/RFI power filtration system provides super clean and stable power to your computer for ultimate system stability and fewer crashes. VOLTAGE - Input: 115/230V Output: 300W. CONNECTORs- (6) 4-pin LP4 Female (2) small internal power (1) 20-pin ATX motherboard adapter. APPROVALS - TUV UL CSA CE CB FCC MTBF- 60 000 hours.

This ATX12V power supply is a 250W PS2 Form Factor five output unit with remote on/off UL CSA CE TUV approvals. Original HP part number 5187-1098 used in many Pavilion and Presario computers. Airflow drawn out of case into surroundings by 80mm internal fan. Built-in power status LED above AC inlet. Product also suitable for HP part numbers 0950-2700 0950-3971 5183-6914 and 5188-2622. Bestec model ATX-250-12Z Rev. D. This power unit has (1) ATX connector (1) ATX12V connector (4) peripheral power connectors and (2) floppy drive connectors. Model: ATX-250-12V rev. D. Type: OEM ATX12V. Dimensions: 140L x 150W x 86H mm (Dimensions US: 5.5 x 5.9 x 3.4 ). Safety: UL CSA TUV CE. Efficiency: 68% minimum at full load. Reliability: > 50K hours at 25C ambient conditions. AC Input: 115/230VAC 6/3A... Less

Specifications. Mfr Part Number: SS-350ES BRONZE. Features: . Specification compliance: ATX 12V v2.2 & EPS 12V v2.9. Support the latest Intel & AMD Socket. PCI-Express & SATA ready. Double forward converter circuit. High efficiency and reliability. Low ripple & noise. Super low noise fan control. Short circuit protection on all outputs. Over voltage protection. Over power protection. 100% hi-pot test. 100% burn in high temperature cycled on/off. Energy-Efficient : 80 PLUS BRONZE Certified . Total Power: 350 W. Input Voltage: 100240 V. Input Frequency Range: 47 63 Hz. In-rush Current Cold Start: 100A max. Hold Up Time Full Load: 10 ms. Power Factor Correction: Active PFC 99% typical. Safety: CUL TUV CB CCC. EMI/RFI: CE FCC C-tick. Output: +3.3V @ 20A +5V @ 20A +12V1 @ 17A +12V2 @ 17A -12V... Less

Specifications. Mfr Part Number: SS-500ET BRONZE. Features:. Specification compliance: ATX 12V v2.2. Support the latest Intel & AMD Socket. PCI Express & Serial ATA ready. Double forward converter circuit . High efficiency and reliability. Low ripple & noise. Super low noise fan control. Short circuit protection on all outputs. Over voltage protection. Over power protection. 100% hi-pot test. 100% burn in high temperature cycled on/off. Energy-Efficient : 80 PLUS BRONZE Certified . Total Power: 500 W. Input Voltage: 100240 V. Input Frequency Range: 50 60 Hz. Power Factor Correction: Active PFC 99% typical. Safety: CUL TUV CB UL CCC. EMI/RFI: CE FCC C-tick. Output: +3.3V @ 24A +5V @ 24A +12V1 @ 17A +12V2 @ 17A -12V @ 0.8A +5Vsb @ 2.5A. Connector: 1x 24pin Main; 1x 8pin 12V CPU; 1x 4pin 12V... Less

Good balance between noise and cooling level. Cable-tube on main power cables for better routing and neatness. Universal connector fits most branded motherboard. Form Factor: ATX. Wattage: 600-Watt. Fan: 140 mm. Input Voltage: 100132VAC or 200264VAC. Dimensions: 5.90 x 6.30 x 3.30 . Sata Power Connector: 2. 20+4-Pin Connector: 1.

Input Voltage: 132 V AC 264 V AC. Input Voltage Range: 90 V AC to 132 V AC 180 V AC to 264 V AC. Output Voltage: 3.3 V DC 5 V DC 12 V DC - 5 V DC - 12 V DC. Frequency: 47 Hz to 63 Hz. Output Power: 300 W. 1 x 20 - pin ATX Motherboard. 1 x 4 - pin ATX Motherboard. 1 x 6 - pin AUX. 1 x 4 - pin LP4 Peripheral Device. 1 x 4 - pin SP4 Floppy Drive. Temperature: 32F (0C) to 122F (50C) Operating. Dimensions: 3.30 Height x 6 Width x 5.50 Depth. Compatibility: AMD Systems. Intel Systems: Pentium 3 Pentium 4. Certifications and Standards: UL CSA FCC TUV NEMKO DEMKO SEMKO FI CE.

Type: ATX 12V V2.2. Maximum Power: 500W. Fans: 1 x 80mm fan. PFC: No. Main Connector: 20+4Pin. +12V Rails: 2. PCI-Express Connector: No. SATA Power Connector: 1. SLI: No. CrossFire: No. Modular: No. Over Voltage Protection: Yes. Input Voltage: 115 / 230 V. Input Frequency Range: 50/60 Hz. Input Current: 12A @ 115V 6A @ 230V. Output: +3.3V@23A +5V@21A +12V1@13A +12V2@13A -12V@1A +5VSB@2A . Approvals: cUL UL CSA. Connectors: 1 x Main connector (20+4Pin) 1 x 12V(P4) 4 x Peripheral 1 x SATA 1 x Floppy. High efficiency. Low noise and Ripple. Excellent Performance on Efficiency and Reliability. Over current protection. Short Circuit Protection on all Outputs. Energy Star Green Power.

StarTech 530W Power Supply PartNumber: ATX2POWER530 UPC: 065030839310 Sale Details: Description | Attributes | AboutUs | Payment | Shipping | Returns | Warranty Description This 530 Watt Power Supply is 80 Plus Bronze certified, providing stable power while balancing maximum energy efficiency. Compliant with ATX12V 2.3 standards, this EPS12V 2.91 power supply offers four 12V power rails, two 6-pin PCI Express connectors and an 8-pin EPS connector.A versatile power solution, the PSU is suitable a

Best flexural strength and dimensional stability.Up to 150 C utilization temperature. Design to support Dual/Quad Core CPU Intel i7 CPU and NVIDIA SLI.Modularized cable management to eliminate clutter and improve airflow inside the case.Guaranteed to deliver rated specifications at 40 Degree C.Thermally controlled 120MM double ball-bearing fan from Sanyo Denki.High efficiency 80PLUS certified.Max 87% efficient at typical load.Industrial grade Japanese capacitors.Full range input 115240Vac with active power factor correction (PFgreater than 0.99).Six 12V rails to provide superior safety and stable current.Patented +12V single rail and multiple rail switch.Two 8-pin and four 6-pin PCI-E connectors design supports Multi-GPU Graphic card.Safety agency approval/EMI approvals: CE CB TUV FCC CUL... Less

Specification Mfr Part Number: FSP200-50PL-B Features Complied with Flex ATX and ATX12V standard High efficiency and reliability Remote On/Off function Internal 12V DC fan included Noise Killer (Thermal fan speed control function) Low noise and ripple Complies with FCC part 15 subpart J Class B and CISPR 22 Class B Output over voltage short circuit and over current protection 100% Hi-pot ATE and burn-in tested Re-settable power shut down Approved by UL 1950 CSA C22.2 Level 3 Input: Input Range: 90 132 / 180 264V AC Manual Selection Frequency: 47 63 Hz Input Current: 5A (RMS) @ 115V AC 3A (RMS) @ 230V AC Inrush Current: 50A Max for 115V AC 80A Max for 230V AC Cold start Output: Totao Watts: 200 W +5V and +3.3V total output not exceed 75W +3.3V +5V and +12V total output cannot exceed 186.5W... Less