This Prince hydraulic welded cylinder is ideal for high- or low-pressure industrial or mobile applications and works great on the shop press. U.S.A. Cross-tube welded design cylinder...

Power Team Cylinders come standard with swivel caps to reduce the effects of off-center loading. Cylinders may be "dead-ended" without damage. Hard chrome plated, heat treated piston rod reduces wear on piston and gland nut. Built-in safety relief valve prevents over- pressurization of the retract circuit. Each cylinder has two 9796 3/8" NPTF female couplers.

25 Ton 6" Stroke Single Acting Cylinder Product Number: H2506 Features: Internal plunger threads Snap-in grooved saddles Plunger wipers help seal out dirt Collar fixture threads Two base mounting holes Maximum working pressure: 10,000 psi/ 700 bar High strength steel construction

Hydraulic Cylinder, Double Acting Welded Style, Bore Dia 4 In, Stroke 6 In, Rod Dia 2 In, Retract 16 In, Inlet Sae 8, Max Pressure 3000 Psi, Temp Range -20 To 220 F, Ductile Iron Piston Material, High Tensile Strength Piston Rod, Precision Honed Steel Tubes, Polypak Rod Seal, High Tensile Tie Rods, Black Finish

Hydraulic Cylinder, Double Acting Welded Style, Bore Dia 3 In, Stroke 6 In, Rod Dia 1-1/2 In, Retract 14 In, Inlet Sae 8, Max Pressure 3000 Psi, Temp Range -20 To 220 F, Ductile Iron Piston Material, High Tensile Strength Piston Rod, Precision Honed Steel Tubes, Polypak Rod Seal, High Tensile Tie Rods, Black Finish

Save time and money by using Kit OB BHBR hoses to connect the helm and cylinder without a remote bulkhead fitting. The inline bulkhead bend restrictors provide a water resistant through hull passage of the hoses directly from the helm to the cylinder. These hoses are recommended for use with all Uflex helms and cylinders as well as other competing systems. These are rated to 1000 Psi working pressure, but not recommended for racing applications.

Ultimate PRO-Model Rotisserie rotates a body/frame 360 degrees, and locks it in at any position... hydraulic height adjustment, infinite balancing system, and sealed ball-bearing pivot make it easy to rotate the vehicle, even at maximum weight capacityOur most advanced rotisserie gives professionals the easiest way to rotate a body or frame for working in those hard-to-reach areas when doing a full frame-off restoration. Eastwood's PRO Model Rotisserie includes a sealed ball-bearing pivot point, with 2 hydraulic cylinders for height adjustment at the pivot point while mounting or working on your project. Also includes our unique balancer kits for raising and lowering the center of gravity. (No manual lifting involved.) Two 3-ton, 20 ram hydraulic cylinders for height adjustment at the... Less

PORTABLE LP TANK CRANE & TRUCK Unique Crane Lifts, Stores & Transports LP Gas Tanks! There is finally an easy answer to lifting, storing and transporting LP (liquefied petroleum or propane) gas tanks. All-in-one device allows the operator to transport propane tanks to the location, and the built-in crane safely loads the LP tanks into equipment, forklifts or racks. Crane boom is raised and lowered with a manual hand pump hydraulic lift and crane pivots a full 360 for maximum versatility. Tank attachment at the end of the boom utilizes steel grab hooks to securely clamp each cylinder. Propane tank truck features racks that store two tanks vertically and four tanks horizontally; upper horizontal compartments swing out to allow access to lower compartments. All-welded steel... Less

Prince Welded Gladiator Hydraulic Cylinder; Bore: 6", Stroke: 12", Maximum pressure: 3000 psi, Column load: 92000 lbs, Retract: 23", Rod diameter: 3", Mounting type: Crosstube end fittings with grease zerks, Color: Highway Yellow, Port size: 3/4" NPTF

Hydraulic Cylinder, Double Acting Welded Style, Bore Dia 2 In, Stroke 8 In, Rod Dia 1-1/4 In, Retract 16 In, Inlet Sae 6, Max Pressure 3000 Psi, Temp Range -20 To 220 F, Ductile Iron Piston Material, High Tensile Strength Piston Rod, Precision Honed Steel Tubes, Polypak Rod Seal, High Tensile Tie Rods, Black Finish