SPECIFICATIONS- CONTROL PROTOCOL: DMX-512 and 3 wire LMX-128- CONTROL CONNECTIONS: Dual 5 pin XLR, DMX- Dual 3 pin XLR, LMX- POWER REQUIREMENTS: 120VAC, two 20 Amp circuits- POWER INPUT: Two edison plugs- FREQUENCY: 50 or 60Hz- FUSING: 10 Amp each channel- PREHEAT VOLTAGE: Soft start controlled- RESPONSE CURVE: Modified square law- FILTER RISE TIME: 350 Microseconds- FILTER MAX. RATE OF RISE: 105 Milliamps / Microsecond- RESPONSE TIME: 8.3 Milliseconds- FULL LOAD VOLTAGE DROP: 3 Volts- CONDUCTION ANGLE RANGE: 180 Degrees- EFFICIENCY: 97%Optional Accessories :ST Stage pin Output $122.85UB 12 Amp Mains Circuit Breaker, 2880 Watts Total Load $22.75UT Twist lock Power Input Connector $58.50230V 230 Volt Operation $58.50

The Rane HC 6 is one of the most indispensable products for your studio or live sound gig! Featuring six stereo headphone amplifiers, the HC 6 performs all the headphone- related tasks you need, plus a few more.The HC 6 provides master stereo inputs which can be used to drive any or all of the six stereo headphone amplifiers. A mono switch is provided on the front panel to drive both channels of all six amplifiers from a common mono source. The HC 6 includes six individual unbalanced stereo inputs to drive any individual amplifier from a separate stereo source. These inputs can be converted to mono balanced inputs through internal jumpers if required. Outputs for all of the HC 6's six channels are provided on both the front panel and the rear panel so that headphones may be connected on... Less

Terminal Block, Maximum Current Rating 60 Amps, Maximum Voltage 600 Vac, Maximum Awg 8, Minimum Awg 22, Pieces Per Foot 34, Channel Mount, Material Nylon, Color Natural, Mounts To Gh Channel And 35 Mm Din Track, Temperature Rating -40 To 257 Degrees Farenheit, Height 1.79 Inches, Depth 1.72 Inches, Width 0.350 Inch, Includes Banana Test Plug Adapter

The SNAP-HD-G4F6 header cable connects a SNAP 32-channel load sinking output module (SNAP-ODC-32-SNK or SNAP-ODC-32-SNK-FM ) to two G4 digital I/O racks. This connection allows older G4 (or even G1) digital output systems to be integrated with modern Opto 22 products like SNAP PAC controllers, SNAP Ethernet-based brains, and PAC Project software. This connection makes available the G4 output module's 3 amp switching capability, providing 12 times the 0.25 amp capability per point of the high-density digital modules. The SNAP-HD-G4F6 connects one high-density digital module with two G4PB16H, G4PB16HC, PB16H, or PB16HC racks, or with G4PB16L or PB16L integrated I/O. All G4 or G1 modules on the rack must be of the same type (input or output) and of the same logic voltage (5, 15 or 24... Less