Pump Duty Motor, Capacitor-start, Single Phase, Totally Enclosed Fan Cooled, Hp 1/2, Rpm 3450, Voltage 115/230, 56c Nema Frame, 1.15 Service Factor, 60 Hz, Double-shielded Ball Bearings, Thermal Protection Auto, 7.4/3.7 Full Load Amps, Shaft Diameter 5/8 In, Shaft Length 1 7/8 In, Ambient 40 C, Cw/ccw Rotation, Insulation Class B

Reversing switch for electric motors, single phase only. Instructions included. Note: We recommend this control only be installed by a qualified technician that understands how electric motors are wired. Motor must have wire leads for connections. If motor only has a terminal board it will be very difficult to wire the switch. This installation would most likely require a skilled electric motor technician.

Pump Duty Motor, Capacitor-start,ca pacitor-run, Single Phase, Dripproof, Hp 2, Rpm 3450, Voltage 115/208-230, 56c Nema Frame, 1.15 Service Factor, 60/50 Hz, Rigid Mounting, Double Shielded Ball Bearings, Thermal Protection Manual, 15.6/8.8-7.8 Full Load Amps, Shaft Diameter 5/8 In, Shaft Length 1 7/8 In, Ambient 40 C, Cw/ccw Rotation, Insulation Class B

160634 Blade size: 20", Power: 5 HP 208 / 230V / Single Phase Features: -Wet Cutting Block Saws MK-5005S, MK-5005T.-Precisio n screw feed mechanism allows the cutting head to be easily raised or lowered to the precise cutting depth required.-Conveyor cart built from heavy-duty cast aluminum.-3 phase saws are equipped with GE NEMA 1 starters in NEMA 12 enclosure.-Adjusta ble water supply for maximum blade protection.-Built- in tie-downs for safer saw transport.-Ergonom ically designed handle for reduced operator fatigue.-Spherical rod ends are used to maintain proper cutting head alignment.-Gas saw engine attachment is via four vibration isolation mounts.-Gas saws come with belt driven, self-priming centrifugal water pumps that can be disengaged for dry cutting.-Heavy-dut y built-in... Less

This General Purpose Motor can be used on a wide variety of single phase applications. To get all of the complete motor specs visits www.leeson.com Just use the part # in your search Specs on Motor 5HP Single Phase ODP (open drip proof) F.L. amps at 230 Volts 20.8 7/8" shaft diameter 3450 Rpm weighs 110 lbs

AC Electric Motor 3 HP 3 Phase NEW For CNC Machine Hydraulic Pump 2.2kw, 4 Poles, 220 / 380V, 3 Phase 60 / 50Hz, 9.0 / 5.2 Amps, 1720 / 1420 Rpm Motor Shaft ID 0.750" Buyer responsible for shipping freight charge, Please contact for shipping quote, freight charge will vary by location. Question please E-mail ahnv@avtechmachin e.com SK831802

Features and Benefits:. Solid cast iron 80 gallon vertical tank with an integrated after cooler. Start-Stop pressure switch control air receivers are ASME/CRN certified. Magnetic starter provides the thermal protection for the electric motors and come with Nema 1 enclosures. CFM: 18.5 Maximum pressure: 175 PSI. Safety: Fully enclosed-high flow belt guard low oil level switch and an automatic tank drain. This RCP series reciprocating compressor comes with solid cast iron cylinders for strength. The aluminum heads coolers and crankcases allow for superior heat dissipation. Industrial grade connecting rods have cast splash pins and replaceable automotive style insert bearings. The cast iron crankshaft along with balanced pistons and over sized main bearings guarantees smooth operation. This... Less

Single-Phasease, single Speed, 115/230V, 1/4 HP, ball bearing for Class I Group D and Class II, Groups E, F & G. Use only on explosion-proof, non-oscillating fans with BA-1A Propeller) 14.00 L. 19.00 W. 12.00 H.

Single-Phasease, three Speed, 115V, 1/5 HP, ball bearing, non-oscillating, 5/8' shaftuse only on standard 18" and 20" non-oscillating fans) Use BA-1APropeller.

Leeson Farm Duty High Starting Torque, Capacitor Start motor. Overall Length = 11.31" Excellent motor for any application requiring a 3/4hp motor. This Totally Enclosed motor is Excellent for woodworking machines and other industrial machines where the motor is exposed to saw dust, dirt, oil and other partics in the air that will damage the motor. Motor also has manual overload protection to prevent damage in an overload situation. Mounting is standard NEMA 56 frame, flat base with 4 holes. 3" x 5" mounting. Farm duty motors have many extra features over standard motors such as double sealed bearings with Exxon grease for a temperature range of -20F to +350F. Rubber boot over reset button provides additional protection. Gasketed junction box and capacitor covers. 1 Year Manufacture... Less