LEESON Electric and Lincoln Motors line of single phase General Purpose AC motors include both ODP and TEFC enclosures. Features include: Durable rolled steel frame Class B insulation High-quality ball bearings Easy-to-read nameplate Some 56 frame motors have a 56, 56H, 143T and 145T combination base with 12 mounting holes for flexible installation. UL Recognized Component Listing and CSA approval. Warranty - 12 months from date of first use or 18 months from date of manufacture, whichever comes first.

FREE SHIPPING !Set UpProductionThe stability legs slide outwardto accomodate a wide varietyof mud pans. They can also beadjusted up or down dependingupon the desired discharge height.These extra wide stability legsare standard on the Mortarman750 MBP and are available as anaccessory kit for the Mortarman360 MBP.Further study and testing havelead to drum and paddle designchanges that vastly improve batchoutput, mix 800 to 1,600 lbs. ofmaterial every load. Mini BatchPlant production for the cost of amortar mixer. ReliabilityThe paddle systems arepowered by monstergearboxes which weredeveloped in our batchplant division.Output has been increased to 9-18 cu. ft. of mud every three to four minutes-perfect partners for busy precast mixing operations system. The discharge system is now easier to... Less

Imer Mortarman 360 Mixer 5hp 220v Electric Motor The 360 is designed to be a portable mixer that performs like a mini batch plant. The fastest mixers available today are the Mortarman vertical shaft machines from IMER U.S.A. The horizontal sweeping action, combined with the free spinning trident paddles, delivers fast and thorough mixing along with rapid and complete discharge. Available mixing torque is tremendous, pre-blending a full batch of dry material is no problem. The lower the slump, t

Pump Duty Motor, 3 Phase, Totally Enclosed Fan Cooled, Hp 3/4, Rpm 3450/2850, Voltage 208-220/440, 56j Nema Frame, 1.00 Service Factor, Face/base Mounting, Ball Bearings, Thermal Protection None, 2.8-2.9/1.5 Full Load Amps, Shaft Diameter 5/8 In, Shaft Length 2 7/16 In, Ambient 40 C, Shaft Type Threaded 11/16 From End, Cw/ccw Rotation, Insulation Class B, 74.0 Nominal Efficiency, 60 Hz

Compressor Duty Motor: 2HP, 1740RPM, 182 Frame, Drip-Proof (DP), 115/208-230V, 1PH, Continuous duty, No thermal protection, 1.15 Service Factor, Rigid Mount. Motors are designed for air compressor, pump, and fan and blower duty applications which require high breakdown torque and rugged mechanical construction. Mechanical Features: Prelubricated double shielded, amply sized, ball bearing construction to accommodate varying belt loads and tension. Electrical Features: High efficiency energy saving designs. Class "F" copper windings. Class "F" varnish. High starting and breakdown torque. Motors are wired for CW rotation facing lead end. They may be reconnected for CCW rotation. Click here to see our full selection of Motor Controls and Drives. Click for Motor Outline and Dimensions... Less

1188752- Combicut1000- 220v Voltage: 220v This saw is a must when cutting through the larger, thicker materials which are more prevalent these days. The Combicut 1000 is available in 1.5 HP, 110v or 3 HP, 220v motors. The 14'' blade will allow cuts to 5'' in thickness and will rip 40'' in length. The Combicut 1000 14'' Saw will drop down to do 45 degree angles for miters or for bevels. The best way to describe this saw is as a bulldozer with the precision of a surgeon. The Combicut 1000 is comfortable at the office or on the road. This Imer saw has the desire to gobble up, chew and spit out the most difficult of materials. Stand and wheel kit come free with this model. Features: -Choose between 1.5 hp 110v or 3 hp 220v motor -Includes stand and wheel kit -Make perfect 45 degree cuts, just... Less

Capacitor-start, Capacitor-run Motor, Open Dripproof, Hp 5, Rpm 3520, Voltage 230 V, Nema Frame 184t, Service Factor 1.15, Frequency 60 Hz, Mounting Rigid, Bearings Double Shielded Ball, Thermal Protection None, Full Load Amps 21.2

General Purpose, Capacitor Start-Inductor Run Motor: 1/2HP, 1725 RPM, Drip-Proof (DP) Enclosure, 56 Frame, Resilient Base Mount, 115/208-230V, 1PH, 60HZ, Name Plate Amps 8.8/4-4.4, Continuous duty, 1.25 Service Factor, Automatic thermal protection, Efficiency: 62, Efficiency Type: Standard, Ambient 40 C, Selective CCW Rotation, Shaft Length 1-7/8", Shaft Diameter 5/8".Drip proof (DP)enclosure has vents in end shield and/or frame to prevent drops of liquid from falling into motor within a 15 degree angle from vertical. Designed for use in areas that are reasonably dry, clean, and well ventilated (usually indoors). If installed outdoors, it is recommended that the motor be protected with a cover that does not restrict the flow of air to the motor. Click here to see our full selection of... Less

Capacitor-start, Capacitor-run Motor, Totally Enclosed Fan-cooled, Hp 5, Rpm 1740, Voltage 230 V, Nema Frame 213t, Service Factor 1.00, Frequency 60 Hz, Mounting Rigid, Bearings Double Shielded Ball, Thermal Protection None, Full Load Amps 20.5

AO Smith/Century Farm Duty Extra High Starting Torque, Capacitor Start motor. Designed for high starting torque loads (300-400% of full load torque). All parts corrosion resistant. Removable condensate plugs.Excellent motor for any application requiring a 5 hp motor. This Totally Enclosed motor is excellent for woodworking machines, farm equipment and other industrial machines where the motor is exposed to saw dust, dirt, oil and other particles in the air that will damage the motor. Motor also has manual overload protection to prevent damage in an overload situation. Mounting is standard NEMA 184T frame, flat base with 6 holes, ball bearings. Gasketed junction box and capacitor covers. Manual Overload Protection (red reset button). 1 Year Manufacture Warranty.

This 21"/ 53cm Variable Speed Turbo Blower has a 3-blade plastic impeller. 1.5Hp/1.1kW 115/220V, 50/60Hz Motor. IntelliSense Water Resistant Digital Speed Control allows continuous airflow adjustment. Variable speed control reduces starting amps required to allow operation on GFCI circuits and generators as small as 2kW. 11/4"/32mm powder coated steel frame with all-terrain pneumatic tires. Full-width retractable handle for upright, push/pull operation. 0-20 tilt adjustment for fast, easy set-up. Horsepower rating based upon maximum speed/load. 27.00 L. 26.00 W. 22.00 H.

Pressure Washer, Capacitor Start, Capacitor Run, Open Dripproof Motor, Hp 5, Rpm 3450, Voltage 208-230 V, Nema Frame 56hcz, Service Factor 1.15, Frequency 60 Hz, Mounting Face/base, Bearings Double Shielded Ball, Thermal Protection Manual, Full Load Amps 22.0-21.5, Rotation Cw Shaft End

LEESON Electric and Lincoln Motors line of single phase General Purpose AC motors include both ODP and TEFC enclosures. Features include: Durable rolled steel frame Class B insulation High-quality ball bearings Easy-to-read nameplate Some 56 frame motors have a 56, 56H, 143T and 145T combination base with 12 mounting holes for flexible installation. UL Recognized Component Listing and CSA approval. Warranty - 12 months from date of first use or 18 months from date of manufacture, whichever comes first.

LEESON Electric and Lincoln Motors line of single phase General Purpose AC motors include both ODP and TEFC enclosures. Features include: Durable rolled steel frame Class B insulation High-quality ball bearings Easy-to-read nameplate Some 56 frame motors have a 56, 56H, 143T and 145T combination base with 12 mounting holes for flexible installation. UL Recognized Component Listing and CSA approval. Warranty - 12 months from date of first use or 18 months from date of manufacture, whichever comes first.

GE Golf Cart Industrial Series Motor  36 volt 3 hp @ 3000 rpm.  48 volt 4 hp @ 4000 rpm.  Cushman vehicles with 10 tooth coupling similar to Club Car. 

Air Compressor Motors, Capacitor-start, Open Drip Proof, 2 Hp, 3450 Rpm, 56 Nema Frame, 115/230 Voltage, 23.8/11.8 Full Load Amps, 1.15 Service Factor, Manual Thermal Protection, Rigid Welded Base Mounting, Ball Bearings, Ambient 40 C, Insulation Class B, Cw/ccw Rotation, Shaft Diameter 5/8 In, Shaft Length 1 7/8 In, 60 Hz, Single Phase, Gray Finish

Capacitor Start, Capacitor-run Motor, Totally Enclosed Fan Cooled Enclosure, Hp 3/4, Rpm 1140, Voltage 115/230, 60 Hz, 1.00 Service Factor, Nema Frame 56, Rigid Mounting, Double Shielded Ball Bearings, Thermal Protection None, Full Load Amps 10.6/5.3, Insulation Class B, Ambient 40 C, Cw/ccw Rotation, Shaft Diameter 5/8 In, Shaft Length 1 7/8 In, Single Phase

AC Electrical Motor 1 HP 220V 3 Phase NEW For CNC Machine Hydraulic Pump 0.75kw, 4 Poles, 220 /380V 3 Phase 60Hz, 3.3/1.9 Amps, 1720 Rpm Buyer responsible for shipping freight charge, Please contact for shipping quote, freight charge will vary by location. Question please E-mail ahnv@avtechmachin e.com SK832605 (SML12, T-6A)

LEESON Electric and Lincoln Motors line of single phase General Purpose AC motors include both ODP and TEFC enclosures. Features include: Durable rolled steel frame Class B insulation High-quality ball bearings Easy-to-read nameplate Some 56 frame motors have a 56, 56H, 143T and 145T combination base with 12 mounting holes for flexible installation. UL Recognized Component Listing and CSA approval. Warranty - 12 months from date of first use or 18 months from date of manufacture, whichever comes first.

This heavy duty dual speed floor machine is powered by a 1.5 HP electric motor, and a dual speed transmission. With just the flick of a switch, you can go from scrubbing a floor to buffing it. This electric floor machine is a dual speed powerhouse that breezes through any type of floor maintenance including sanding, rug shampooing and even polishing terrazzo floors.

Capacitor-start Motor, Open Dripproof, Hp 1/3, Rpm 1725/1425, Voltage 100-120/200-240, Nema Frame 56, 1.35 Service Factor, 60/50 Hz, Cradle Mounting, Ball Bearings, Thermal Protection Auto, Full Load Amps 4.0-3.8/2.0-1.9, Insulation Class B, Ambient 40 C, Cw/ccw Rotation, Shaft Diameter 5/8 In, Shaft Length 1 7/8 In, Nominal Efficiency 70.2

LEESON Electric and Lincoln Motors line of single phase General Purpose AC motors include both ODP and TEFC enclosures. Features include: Durable rolled steel frame Class B insulation High-quality ball bearings Easy-to-read nameplate Some 56 frame motors have a 56, 56H, 143T and 145T combination base with 12 mounting holes for flexible installation. UL Recognized Component Listing and CSA approval. Warranty - 12 months from date of first use or 18 months from date of manufacture, whichever comes first.

Great Performance and ValueEach BelAire compressor comes complete with everything you need to optimize your work and minimize down time. All BelAire Two Stage compressors come with a full 2 Year Warranty (including valves).The 216V Features: * Solid Cast Iron Cylinder * Start-Stop Pressure Switch Control * ASME Code Tank and Safety Valves * Fully Enclosed High Flow Belt Guard * Oil Level Sight Glass * 100% Factory Tested at Full Pressure * 208-230 Volt MotorsSpecificati ons: * Horsepower: 5 * Voltage/Phase: 208-230/1 * Tank (gal): 60 * CFM Displacement: 18.6 * ACFM @ 100 psi: 15.33 * ACFM @ 175 PSI: 13.75 * Max PSI: 165 * Dim. In. L X W x H: 29 x 20 x 68Warranty: * 2 Year Bumper to BumperNote: This model dose not require a magnetic starter. Recommended Dryer for this compressor is the... Less

Capacitor Start, Capacitor-run Motor, Totally Enclosed Fan Cooled Enclosure, Hp 1, Rpm 1725/1425, Voltage 100-120/200-240, 60/50 Hz, 1.15 Service Factor, Nema Frame 56, Rigid Mounting, Double Shielded Ball Bearings, Thermal Protection None, Full Load Amps 11.8-11.4/5.9-5.7, Insulation Class B, Ambient 40 C, Cw/ccw Rotation, Shaft Diameter 5/8 In, Shaft Length 1 7/8 In, Single Phase

LEESON Electric and Lincoln Motors line of single phase General Purpose AC motors include both ODP and TEFC enclosures. Features include: Durable rolled steel frame Class B insulation High-quality ball bearings Easy-to-read nameplate Some 56 frame motors have a 56, 56H, 143T and 145T combination base with 12 mounting holes for flexible installation. UL Recognized Component Listing and CSA approval. Warranty - 12 months from date of first use or 18 months from date of manufacture, whichever comes first.