Roller Bunks * Change bunk trailers to roller type * Channel-style bunks pre-assembled * Pair supports up to 1,500 lbs. * Made of heavy gauge galvanized steel for long lasting rust protection * Can be mounted on existing flat bunkboard or used with our special mounting (sold separately) for height and angle adjustment * Hardware NOT included * Channel: 2-1/8"W x 2-1/2"H * Sold in pairs, boxed * Length: 5' * Rollers 6  

Smith Rollers -DEEP V KEEL ROLLER Item Details and Description Smith Rollers Deep V Keel Roller Diameter: 3-1/2"Length: 10"Shaft Size: 5/8" Rollers are replacements for the original equipment of many trailers. Fit standard shaft sizes. Black rubber. Part # CES29501 If you have any questions on this item, please email us directly . Looking for different size? Stop by our ebay store where you can find a wide selection of life vests, propellers , steering systems, and other miscellaneous marine ac

These hot-dipped galvanized roller brackets are pre-assembled for easy installation. 17/32' x 5' slot allows vertical adjustment for proper keel support. Rubber roller is 5'.

Ribbed Roller 4 Pack - Gold Replace your ribbed wobble rollers with this thermal- plasticized rubber ribbed roller kit Rollers fit 1-1/8" shaft Kit includes four 5" x 3" ribbed rollers with polypropylene hub, four Delrin bushings for 3/4" shaft, for 1-1/8" washers, four 3/4" washers and four retainer rings

Smith Rollers - BLACK ROLLER BRACKET ASSEMBLY 5" Smith Rollers - Black Roller Bracket Assembly Pre-assembled for easy installation Strong hot-dipped galvanized brackets hold shock absorbing rollers to give proper keel support 17/32" x 5" slot for vertical adjustment Attach with 1/2" or 7/16" bolt

Visually guide your boat onto your trailer with Fulton's easy-to-use, easy-to-install, steel- constructed boat guide. Adjustable to provide the best fit for any hull design. For trailer frames up to 3 in x 5 in Clamp-on installation - no drilling required High-strength, super-gripper mounting brackets attach above and below trailer frameDurable, long-lasting steel construction with non-marring, cushioned rollersCorrosion- resistant, galvanized finishComes in a pairMade in the USAHas 20" upright heightFits trailer frames up to 3" wide x 5" high

These hot-dipped galvanized roller brackets are pre-assembled for easy installation. 17/32" x 5" slot allows vertical adjustment for proper keel support. Rubber roller is 5".

Non-marking TPR (thermal plasticized rubber) roller kit is resilient, stronger than black rubber, and softer than polyethylene. Includes four 5' x 3' ribbed rollers with polypropylene hub, four Delrin® bushings, four washers for 1-1/8' shaft, four washers for 3/4' shaft, and four retainer rings. Rollers fit 1-1/8' shaft. Bushings included to convert to fit 3/4' shaft.

Great Lakes Skipper Click any image for larger view in a new window Great Lakes Skipper Please visit Great Lakes Skipper for THOUSANDS of new, hard to find boat parts and other marine surplus! We are selling a NEW, in the box, stainless steel anchor roller from Bayliner.This pristine anchor roller measures approximately 16 long x 2 wide (body) x 3 wide (at flair) x 1 high (short end) and tapers up to 5 high (tall end). The heavy duty rubber roller accommodates a 3/8 chain or a 1/2 anchor line.S

This plow style anchor housing is constructed of high grade stainless steel. Originally designed for Baja boats, this 15 pound anchor housing is stylish and attracts attention. The faceplate measures approximately 19 5/8" (vertically) x 10" (laterally) and has four 3/8" countersunk mounting holes. The housing box (behind face) is 6 1/2" (vertically) x 3" (laterally) and sets back 14 1/2" (top) and 10 1/4" (bottom) into the hull.

Designed to support keel rollers, these hot-dipped galvanized brackets accept 1/2' or 5/8' dia. shafts and up to 1/2' dia. bolts.

Everything you need to replace old ribbed wobble rollers! Packages include four 5' x 3' ribbed rollers with four Delrin® bushings, four washers for 11/8' dia. shaft, four washers for 3/4' dia. shaft, and four retainer rings. Rollers fit 11/8' dia. shaft. Bushings included to convert to fit 3/4' dia. shaft.

Manson Anchors Supreme Galvanized Anchor, 5lb., To 10' Boat Length, 13.5"l X 8.25"w 8.75"h . A fast-setting, high-holding anchor for all sea bottoms This Lloyd s Register- certified anchor unites immediate setting with superior holding power for excellent performance in a variety of seabeds. Lloyd s Register Type approval means the Supreme has passed stringent manufacturing tests and countless sea trials to far exceed all current certification codes for quality, performance and craftsmanship. Built from high tensile steel, this "scoop" style anchor uses a roll bar to self-right instead of a heavily leaded tip, so weight can be distributed to the load-bearing fluke for increased surface area and a much higher holding power. The sharp spear point digs right in, penetrates deeply and sets... Less

Sharkskin is a specially formulated polyester that weighs only 6.5 oz. per square yard. Still incredibly strong and durable, this cover provides outstanding protection for boats by repelling water, mildew, UV rays, and other foreign elements. Fade-resistant, breathable finish resists staining and prolongs cover life. 5-year limited warranty.Orders for Covermate Exact-Fit Covers cannot be canceled and are non-returnable and non-refundable. Please include your boat year, make, and model in your order comments, so we can verify the cover application. If you need help selecting the correct Exact-Fit Cover for your boat, please use our Live Help or call us at 1-888-OVERTON, and we will be happy to assist you. Please have your boat year, make, and model available.

Tie Down Hull Sav'r - 5" WOBBLE ROLLER KIT Item Details and Description Tie Down Hull Sav'r PVC 5" Wobble Roller Kit Comes with 7/8 & 1.15 bushings, Hog Rings & Washers New poly vinyl rollers are long lasting, will absorb shock, are cut resistant and will not mark or mar your boat. Tie down's enhanced formula for PVC far outperforms traditional polyurethane products.

This innovative roller takes the guess work out of centering your boat on the trailer. With embedded grooves to automatically center the boat while the boat rolls forward. Resilient and non-marking. 5/8" shaft diameter.

This anchor roller measures approximately 23" long x 4" wide (body) x 5½" wide (at flair) x 1/2" high (short end) and tapers up to 4" high (tall end). Specifications: Manufacturer: Windline Vendor: Triton Material(s): Stainless Steel Roller: 2¾" OD x 3¼" L Overall Dimensions: 23" L x 5½" D x 4" H Sold as seen in pictures.

Roll - n - Go Model 2000 18 - Ft. Boat Docking Ramp. Spend more time boating... take the hassle out of boat launching, docking and maintenance too! Roll-n-Go is changing the way small watercraft gets on and off the water. It can iron out all the "kinks" you experience when launching, docking and maintaining your boat with an old-fashioned standard dock. Roll-n-Go's 8 Great Boat Launching Solutions! They're the answer... When it's either physically impossible to install a dock, or it's prohibited by local ordinance; When the budget just won't stretch to cover expensive permanent docking; When there's no beach... just a rough, rocky shoreline When you're fed up with dock-in / dock-out chores that eat up time and strain your muscles; When you just haven't got the space to fit in a lift; When... Less

Great Lakes Skipper Click any image for larger view in a new window Great Lakes Skipper Please visit Great Lakes Skipper for THOUSANDS of new, hard to find boat parts and other marine surplus! We are selling a NEW, out of the box, stainless steel anchor roller manufactured by Windline. Commonly used by Triton. This anchor roller measures approximately 18 long x 3 wide (body) x 5 wide (at flair) x 5/8 high (short end) and tapers up to 3 7/8 high (tall end). Specifications: Manufacturer: Windline

Stoltz Roller Keel Poly 5" Long, 1/2" Shaft lasts longer, won't split, crack or leave scuffs on your boat... SAVE BIG! It just might be the last keel roller you buy! Unlike standard PVC and rubber rollers that need frequent replacement, Stoltz Super Rollers are made of non-marking, extra durable polyurethane. You get extreme cut and abrasion resistant plus no splitting or cracking, even in extreme cold. Details: Guaranteed to outlast any other roller on the market; U.V. stabilized formula will maintain its color much longer; Lab test proven to have much better abrasion resistance than PVC; Extremely cut resistant; Will not mark your boat; Won't flat spot; 5" long, 1/2" shaft; Made in the USA; Sick of replacing rollers? Step up to Stoltz! Order Today! Stoltz Roller Keel Poly 5" Long, 1/2"... Less

Lewmar Cqr Anchor 140lb. Anchor, Boats 80' 90', 52 5/8"l X 21 1/8"w 23"h . The legendary Lewmar plow anchor stays put, won't breakA favorite among bluewater cruisers for its strength and performance in a wide range of bottom conditions. Excellent penetration in sand, weeds, rocks and mud. Trouble-free anchor roller stowage. Attach a trip line to the eye on the horn for easy break-out. Hinged shank prevents breakout during wind shifts. Forged steel construction. Hot dip galvanized. Lifetime warranty against breakage. Style: Hinged Plow Material: Galvanized Steel Application: Sand, Rock and Grass Pros: Great reputation. Very strong construction. Stows easily on an anchor roller. Sets in most seabeds. Penetrates weeds, sand and mud. Hooks rocks. Cons: Requires larger sizes for given boat... Less

Price is for 1 PAIR.MPN: T-980.Single Wobble Roller AssemblyVeeVee WOBBLE ROLLER ASSEMBLY T-980.The VE-VE 28" Wobble Roller Assembly includes 8 wobble rollers per pair. The 2" sq. x 14 ga. tube is 28" long. Roller assemblies (2 ea. wobble rollers on shaft) have an outside to outside width of 14". The distance from top of trailer frame to top of rollers is 7-5/8" on the lower adjustment and 8-3/4" at the top adjustment. Packaged one pair per carton with all mounting hardware. Mounts to cross members up to 3" x 5".Price is only for Item# LJ-3750980: VeeVee WOBBLE ROLLER ASSEMBLY T-980.NOTE: International delivery is not available except Canada.

Commonly used by Triton. This anchor roller measures approximately 20" long x 2¾" wide (body) x 4 3/8" wide (at flair) x 5/8" high (short end) and tapers up to 3½" high (tall end). For boats up to 35' with Danforth®, Fortress® and Delta® type anchors. Specifications: Manufacturer: Windline Part #: URM-4AE Vendor: Triton Material(s): Stainless Steel Roller: 2½" OD x 2¼" D Overall Dimensions: 20" L x 4 3/8" D x 3 1/2" H Sold as seen in pictures.

Roll - n - Go Model 1200 18 - Ft. Boat Docking Ramp. Spend more time boating... take the hassle out of boat launching, docking and maintenance too! Roll-n-Go is changing the way small watercraft gets on and off the water. It can iron out all the "kinks" you experience when launching, docking and maintaining your boat with an old-fashioned standard dock. Roll-n-Go's 8 Great Boat Launching Solutions! They're the answer... When it's either physically impossible to install a dock, or it's prohibited by local ordinance; When the budget just won't stretch to cover expensive permanent docking; When there's no beach... just a rough, rocky shoreline; When you're fed up with dock-in / dock-out chores that eat up time and strain your muscles; When you just haven't got the space to fit in a lift;... Less

Great Lakes Skipper Click any image for larger view in a new window Great Lakes Skipper Please visit Great Lakes Skipper for THOUSANDS of new, hard to find boat parts and other marine surplus! We are selling a NEW, out of the box, stainless steel anchor roller manufactured by Windline, part number unknown. Commonly used by Triton. This anchor roller measures approximately 23 long x 4 wide (body) x 5 1/8 wide (at flair) x 3/8 high (short end) and tapers up to 3 3/8 high (tall end). Specifications

Adhesive-backed fishing stickers that will adhere to any smooth surface. Great for displaying on your car, truck, boat, tackle box, cooler, surfboard, skateboard, trailer or kayak. Sticker measures approximately 5" wide. Great new "roller guide" logo. Since 1957 AFTCO has been known as the premier offshore & saltwater fishing tackle brand. Show your love for the sport with an AFTCO fishing sticker! AFTCO > Stickers > Fishing Clothing > Roller Guide 5" Offshore Fishing Sticker - AFTCO

Roll - n - Go Model 1200 18 - Ft. Boat Docking Ramp. Spend more time boating... take the hassle out of boat launching, docking and maintenance too! Roll-n-Go is changing the way small watercraft gets on and off the water. It can iron out all the "kinks" you experience when launching, docking and maintaining your boat with an old-fashioned standard dock. Roll-n-Go's 8 Great Boat Launching Solutions! They're the answer... When it's either physically impossible to install a dock, or it's prohibited by local ordinance; When the budget just won't stretch to cover expensive permanent docking; When there's no beach... just a rough, rocky shoreline; When you're fed up with dock-in / dock-out chores that eat up time and strain your muscles; When you just haven't got the space to fit in a lift;... Less

Lewmar Roller Shade Screen Shade/screen, 18 5/16"l X 21 5/16"w . The new Roller Shade and Screen, is a tough multi-functional hatch accessory, which features an integral black-out screen and fly screen. The Roller Shade Screen will enhance Lewmar's most popular hatch sizes from the current Low and Medium profile ranges. The components offer versatile fitting options such as installing the trim and cassette roller as an integral part to an existing hatch or adding the cassette roller at a later date Whatever your choice, the product is delivered ready assembled, for time saving and convenience

Roll - n - Go Model 750 18 - Ft. Boat Docking Ramp. Spend more time boating... take the hassle out of boat launching, docking and maintenance too! Roll-n-Go is changing the way small watercraft gets on and off the water. It can iron out all the "kinks" you experience when launching, docking and maintaining your boat with an old-fashioned standard dock. Roll-n-Go's 8 Great Boat Launching Solutions! They're the answer... When it's either physically impossible to install a dock, or it's prohibited by local ordinance; When the budget just won't stretch to cover expensive permanent docking; When there's no beach... just a rough, rocky shoreline; When you're fed up with dock-in / dock-out chores that eat up time and strain your muscles; When you just haven't got the space to fit in a lift; When... Less

Roll - n - Go Model 750 18 - Ft. Boat Docking Ramp. Spend more time boating... take the hassle out of boat launching, docking and maintenance too! Roll-n-Go is changing the way small watercraft gets on and off the water. It can iron out all the "kinks" you experience when launching, docking and maintaining your boat with an old-fashioned standard dock. Roll-n-Go's 8 Great Boat Launching Solutions! They're the answer... When it's either physically impossible to install a dock, or it's prohibited by local ordinance; When the budget just won't stretch to cover expensive permanent docking; When there's no beach... just a rough, rocky shoreline; When you're fed up with dock-in / dock-out chores that eat up time and strain your muscles; When you just haven't got the space to fit in a lift; When... Less