Form Factor: 1U chassis support for max. motherboard size - 12 x 13 and 13.68 x 13 (single power only). Processor Support: Supports dual Intel / AMD processors. Dimensions: 1.7 x 17.2 x 25.6 . Colors: Silver Black. Expansion Slots: 1x full-height full-length PCI expansion slot (Riser Card Required). Drive Bays:. Hot-swap: 4x 3.5 U320 SCSI Hot-swap drive bays. SCSI Backplane: 1x 1U SCSI backplane with Enclosure Management. Peripheral Drives:. DVD-ROM: Slim DVD-ROM drive. Front Panel:. Buttons:. Power On/Off button. System Reset button. LEDs:. Power LED. Hard drive activity LED. 2x Network activity LEDs. System Overheat LED. Ports:. 2x USB & DB9 COM port tray (Optional - in place of floppy drive). Fans: 4x 4cm Counter-rotating PWM Fans. Operating Environment (System). Operating Temperature... Less

Form Factor: Rack-mountable 4U. Dimensions (WxDxH): 17.5 x 28 . Warning: Computers and computer circuit boards as well as other electronic equipment contain lead which is a chemical known to the State of California to cause cancer or cause birth defects and other reproductive harm. Please wash hands after handling circuit boards and other internal components of computers and electronic equipment and avoid inhalation of fumes if heating the solder on the internal components or circuit boards.

The Gator Rack Shock Case (Black) is made with a high-density military grade lightweight polyethylene. There are independent rubber single shock absorbers at each corner and 360 degree air ventilation around the equipment. An adjustable interior sliding support on each side of the rack adjusts front to back as well as up and down for rear support of delicate or heavy gear. The case has threaded field replaceable 7.0mm zinc plated steel rack rails. It also has locking lids, heavy-duty twist latches and comfortable recessed side handles. When it comes to security and protection for your precious cargo, Gator doesn't mess around. No matter if you're lugging heavy gear in an ATA case or carrying smaller accessories in a smart messenger bag, Gator has you and your gear covered.Features:... Less

1U chassis support for max. motherboard size - 13 x 13.5 E-ATX. Processor Support: Supports dual Intel Xeon processor 5500 Series (Tylersburg/Nehal em) / AMD Opteron processors. Expansion Slots:. 1x full-height full-length PCI expansion slot (Riser Card Required). 1x low-profile PCI expansion slot (Riser Card Required). Hot-swap: 4x 3.5 U320 SCSI Hot-swap drive bays. SCSI Backplane: 1x 1U SCSI backplane with Enclosure Management. DVD-ROM: Slim DVD-ROM drive. Buttons:. Power On/Off button. System Reset button. LEDs:. Power LED. Hard drive activity LED. 2x Network activity LEDs. System Overheat LED. Ports:. 2x USB & DB9 COM port tray. (Optional - in place of floppy drive). Fans: 4x 4cm Counter-rotating PWM Fans. color: Black.

Powered by Frooition Pro Shop Search Gator G-Tour 4U ATA Rack Flight Case Click here to view full size. Full Size Image Click to close full size. Item Description The Gator G-Tour 4U ATA Rack Flight Case is designed to deliver ultimate protection for your live sound gear. Features front and rear 3.2mm-thick rack rails and a 17 rackable depth with the lid removed. 9mm plywood shell with a polypropylene exterior. The aluminum valance is tongue and grooved for rugged touring duty and twice as thic

This 4 sp (7") shock rack case is brand new and manufactured by a leading case manufacturer in the music industry. The construction consists of 1/4" plywood with a heavy black ABS laminate on the outside and a protective 1 1/2" foam lining inside surrounding the inner rack shell. The case is perimetered with heavy gauge aluminum bindings and valences which are permanently riveted throughout. All recessed latches and spring loaded handles are also included to meet ATA specs. The dimensions of the outer case are made to fit the inner shell very snug and the useable depth in the rack is 20" including the back lid. The outside dimensions are approx: 24" x 25" x 12" high. A great case and a great deal!

G-Shock Rack with Space for Four Rackmount Units from GatorAs the amount of gear that contains disc drives and liquid crystal displays grows, so too is the need for an affordable shock rack. Gator's new G-SHOCK deluxe shock rack cases have a 20.5" rackable depth and are molded from the incredibly durable high-density military grade polyethylene. This lightweight, yet super strong material insures maximum protection at a weight you can easily manage. Gator G-SHOCK uses rubber shock absorbers on all eight corners, which assures a soft ride in every direction. The internal 19-inch rack frame has threaded front and rear rack rails. In addition, Gator G-SHOCK has another exclusive - a moveable rear support system! This does away with needing a machine shop in your garage to make a rear support... Less

To maintain a competitive advantage businesses of all sizes need an ongoing commitment to boosting productivity managing a rapidly growing volume of data and enhancing system flexibility. The Server System SR6850HW4 Barebone supports expanded uptime faster data access and more storage. The Intel Server System SR6850HW4 Barebone makes the ideal foundation for a reliable high-performance enterprise system. Type: Barebone System. Total Processor Support: 4. Network: 2 x IEEE 802.3ab Gigabit Ethernet 10/100/1000Mbps Integrated. Ports:. 2 x RJ-45 Network. 1 x RJ-45 Management. 1 x 15-pin HD-15 VGA Rear. 1 x 15-pin HD-15 VGA Front. 2 x 4-pin Type A USB 2.0 USB Rear. 3 x 4-pin Type A USB 2.0 USB Front. 1 x 9-pin DB-9 RS-232 Serial. Controller:. Ultra ATA. Intel SROMBSAS18e Serial Attached SCSI... Less

Powered by Frooition Pro Home | About Us | Store Policies Shop Search Gator G-Tour 4U ATA Rack Flight Case Click here to view full size. Full Size Image Click to close full size. Item Description The Gator G-Tour 4U ATA Flight Case is designed to deliver ultimate protection for your rack gear. The 4U rack case features front and rear 3.2mm-thick rack rails and a 17" rackable depth with the lid removed. 9mm plywood shell with a PVC exterior. The aluminum valance is tongue and grooved for rugged

9U, 17-inch Deep Fixed Wall Mounted Rack with Vented Glass Front Door Included. Fixed back single section welded frame construction. 17.7-inch depth. Available in 9U and 12U rack capacity. Comes with removable 18 gauge mounting panel for easy wall installation. 18 gauge removable side panels with spring latch. 18 gauge cold rolled steel top and bottom. Fan ready perforated top. 11 gauge drilled and tapped front and rear rack rails. Rack U numbers printed on the rack rail. 1/32 rack screws. 1/2-inch, 5/8-inch, 3/4-inch, 1-inch and 1 1/2-inch cable entry knockouts on top. 5/8-inch knockout designed to be used for VHF/UHF antenna.

Store Home | About | Guarantee | Shipping Store Search in titles description Categories 4 SPACE RACK CASE Amp Effect Mixer PA/DJ PRO Audio New Description Shipping Payment Guarantee Model # SAR4 4 Space Rack Standard 19 Mounting Rail Width Outer Dimensions with Doors On: Height: 9 3/8 - Width: 21 - Depth: 26 Inside Dimensions: Rail to Back with Rear Door On: 20 1/2 Rail to Rear Edge of Case with Door Off: 18 1/2 Front Rail to Rear Rail: 17 1/2 Weight: 26 lbs Black with aluminum rails 3/8" plywo

The Ultimate Strength Series is the best in American technology. This new 2U version has been added to complete the line up of Ultimate Series racks. With its roto molded tough shell, front and rear lids, recessed heavy-duty twist latches, molded in handles, shock absorbing rubber feet and the recognizable patented deep Roto-X pattern for solid stackability, these cases provide maximum protection. The unique molded-in unbendable valance and steel threaded rails make the Ultimate Strength Series Roto-Racks the new professional standard in the industry.

Providing Excellent Service Since 1989 Supermicro Case CSE-041-P4 Black Rackmount SC811I-250 ATX 1U Chassis 0/1/(2) Drive Bays 1Fan wth 250W Power Supply New-Retail Description: Superior design and uncompromising quality control enabled Supermicro to offer high-end products with unsurpassable performance to the market since its founding in 1993. With this unbeatable track record, Supermicro has earned a reputation as a manufacturing leader in the industry. Supermicro strives to build long-term r

The Gator G-Pro Roto Molded Rolling Rack case is virtually indestructible thanks to its sturdy polyethylene construction. With a 19.25 rackable depth and full-size front and rear lids, it'll protect your most important audio gear. Making your life easier, it has a telescoping tow handle, and rugged, rollerblade style wheels. When you are closer to the stage, you can use the molded-in ergonomic side-carry handles. To take away your fear of it opening at inopportune moments, it has recessed steel twist latches.When it comes to security and protection for your precious cargo, Gator doesn't mess around. No matter if you're lugging heavy gear in an ATA case or carrying smaller accessories in a smart messenger bag, Gator has you and your gear covered.Features: Interior Dimensions:Rack... Less

15% Off Site Wide. 5.11 Tactical has joined forces with Special Operations Combat Veteran (RET) Kyle E. Lamb. He Served his country for 21 years, 17 of which were with the most elite elements of the U.S. Army Special Operations Command. He has been decorated for valor in Mogadishu, Somalia, during the battle that was made famous by the movie Blackhawk Down. He was also decorated for valor during Operation Iraqi Freedom. SGM Lamb is one of the most credible and sought-after shooting and tactics instructors in the country. The owner of Viking Tactics (VTAC ), his master-level expertise comes directly from real-world experience. Now 5.11 has partnered with VTAC to bring you the most functional web gear around, MOLLE compatible and featuring 5.11's SlickStick system. Built with durable, water... Less

Features: 9mm plywood construction with PVC exterior Red recessed twist latches and spring-loaded rubber-gripped handles Heavy-duty commercial grade plated hardware and reinforced stackable ball corners 3.2mm thick front & rear rack rails Tongue & groove extruded aluminum valance Color: Black Handles: 2 Spring Loaded Latches: 4 Recessed Twist Water Resistance: Gasket in Lid UPC Code: 716408504315 Interior Length: 16.50" Interior Width: 19.00" Interior Height: 7.00" Rackable Depth (to rear lid): 20.25" Rack Units: 4 Exterior Length: 25.75" Exterior Width: 21.50" Exterior Height: 9.50" Weight: 28.67 pounds

GATOR CASE G SHOCK 4L NEW ATA MOLDED PE SHOCK RACK 4 U Gator Cases G-SHOCK-4L ATA Molded PE Shock Rack w/ Rubber Shock Suspension 4U GATOR CASE G SHOCK 4L NEW ATA MOLDED PE SHOCK RACK 4 U SKU: G-SHOCK-4L Features: Lightweight polyethylene construction Independent rubber shock absorbers at each corner 360 degree air ventilation around equipment Threaded, field replaceable 7mm zinc-plated steel rack rails Adjustable interior sliding support on each side of rack adjusts from to back and up and down for rear support of gear Comfortable recessed side handles and locking lids Heat-treated 10/32 rail bolts & washers included Interior Dimensions: Length: 16.5 Inches Width: 19 Inches Height: 7 Inches Exterior Dimensions: Length: 22.75 Inches Width: 24.25 Inches Height: 12 Inches Condition: New

PROFESSIONAL CUT-OFF & GROOVING KIT MADE IN THE U.S.A. TAPERED LOCKING SYSTEM, NO ADDITIONAL CLAMPING DEVICES REQUIRED. TOOL HOLDER WITH SAME BLADE CAN BE USED FOR RIGHT OR LEFT HANDED APPLICATIONS. THIS KIT COMES WITH 1 TOOL HOLDER, 1 BLADE, 10 AGTN INSERTS 1 WRENCH AND COMES WITH THE CARRY CASE. MFG#: 25B4CTOFF KIT MSRP - $178 You are buying one grooving kit.

THIS GUITAR IS A GREAT FIT FOR: CHILDREN ROUGHLY 8-11 YEARS OLD. Also include tall 8 year olds and smaller 11 or 12 year olds for this guitar. MANY ADULTS SEEKING A SMALLER EASIER GUITAR TO PLAY ALSO FIND THIS A GOOD FIT. The neck on this guitar is narrower than a full size guitar. The frets are a little closer together due to the short scale length from nut to saddle. SEE OUR VIDEO ON OUR YOUTUBE CHANNEL youtube. com/guitarworksin c The nylon strings are super easy to play. The nylon strings stay in tune as much as steel because they are higher quality and were installed correctly. The sound is very warm, lively and responsive. The volume is very good for a smaller size body. The playability or "action" as it is called is very easy to play. For over 30 years I have done a 20 point,... Less

McDermott Handcrafted Cues are the most recognized in the billiard industry. They are known for their quality construction, exotic woods and intricate inlays. Using the latest technology in a state of the art facility along with the finest materials in the world they have become the top brand choice for all players. This McDermott Cue is from the G Series, made proudly in the U.S.A. and has a lifetime warranty including warpage. This Pool Cue Features: Birdseye Maple Forearm and Sleeve Natural Walnut and American Cherry Stains 4 Birdseye Maple Points with Matching Sleeve Inlays Rosewood and Maple Rings 13 mm G Core Shaft 3/8 x 10 Joint with Stainless Steel Collar Everest Tip by Tiger Products Black with Brown Specks Genuine Irish Linen Wrap

healthproducts4u Store Oakworks Essential Carry Case Search Please read description carefully. Do not base your order on the picture presented. The Essential Carry Case has a large pocket, shoulder strap, handles, dual-slide zippers, and is most budget friendly. The durable black nylon will help protect the portable massage table during transport. Preferred method of payment: PayPal. We also accept major credit cards like Visa, Master Card, Amex, Discover.Items are returnable for a partial refu

NORCO RPC-2008 2u (black) rack-mountable case no power supply 1 x slim cd-rom bay, 1 x fdd bay w/ 8 x 3.5" hot-swappable SATA / SAS drive bay & 80mm case fan x 4 verview: Description: 2U Rackmount Server Case w/ 8 Hot-Swappable SATA/SAS Drive Bays Features: 2U rackmount design 8x hot-swappable SATA/SAS drive bays Supports up to eight 3.5" SATA or SAS disk drives; Hot-swappable HDD tray with special designed power-off and lock mechanism. 1 x slim CD-ROM bay,1 x FDD bay, 8 x 3.5 " hot-swappable drive bays Four ball-bearing cooling fans for better ventilation Support EEB (12"x13"), CEB(12"x10.5"), ATX (12"x9.6") motherboard Screwless top cover Smooth border prevent lacerating your skin pecification: Technical Information: Drive Bay 8 x hot-swappable SATA/SAS drive bays, 1 x slim CD-ROM bay,... Less

NORCO RPC-2008 2u (black) rack-mountable case no power supply 1 x slim cd-rom bay, 1 x fdd bay w/ 8 x 3.5" hot-swappable SATA / SAS drive bay & 80mm case fan x 4 2U Rackmount Server Case w/ 8 Hot-Swappable SATA/SAS Drive Bays Features: 2U rackmount design 8x hot-swappable SATA/SAS drive bays Supports up to eight 3.5" SATA or SAS disk drives; Hot-swappable HDD tray with special designed power-off and lock mechanism. 1 x slim CD-ROM bay,1 x FDD bay, 8 x 3.5 " hot-swappable drive bays Four ball-bearing cooling fans for better ventilation Support EEB (12"x13"), CEB(12"x10.5"), ATX (12"x9.6") motherboard Screwless top cover Smooth border prevent lacerating your skin Drive Bay 8 x hot-swappable SATA/SAS drive bays, 1 x slim CD-ROM bay, 1 x FDD bay Cooling Fan 4 x 80mm middle fans wall Switch... Less

Luxurious and durable top-grain leather Rolling computer portfolio features a removable padded computer compartment. Helps protect your laptop during travel. Accordion fan file, organizer and accessory pockets help you stay organized. Cushioned handles allow comfortable carrying. Also features convenient retractable locking handle system. Inline skate wheels with skid protection for smooth, easy mobility. U.S. Luggage Multi-Use Cases part of a large selection of office supplies. U.S. Luggage Wheeled Leather Computer Case With 4 Front Pockets, 15in.H x 17in.W x 9in.D, Black is one of many Notebook Computer Cases available through Office Depot. Made by U.S. Luggage.

This durable Elite Core ATA Effects rack case is for standard 19" wide rackmountable gear. This rugged road case is constructed of 1/4" marine grade plywood, and has many pro features. It would be perfect for tuners, equalizers, effects processors, wireless systems, personal mixers, or just about any piece of gear you want to rack mount and make sure is protected. ||| Outside Dimensions Rubber Feet On - Lids OFF: 21" W x 9" H x 10" D | Lids ON: 21" W x 9" H x 16" D (Each Lid provides 2" of inside usable space) | Shipping Box: 23" W x 11" H x 17" D 27 lbs

19" 4 SPACE 4U RACK DRAWER MOUNT CASE COMPUTER NETWORKING LOCKABLE DJ EQUIPMENT 4 Space Locking Heavy Duty Rack Drawer Sku#: T-4RD Description: This 4 space rack drawer is built to last as it is made from solid steel. This rack drawer is the perfect accessory to your rack because it will help you get organized and can protect all types of accessories, adapters, cables, iPods, etc. This unit comes with a locking feature, so it is ideal for storing your phone, wallet, or other valuables. This 3 s

Features: 9mm plywood construction with PVC exterior Red recessed twist latches and spring-loaded rubber-gripped handles Heavy-duty commercial grade plated hardware and reinforced stackable ball corners 3.2mm thick front & rear rack rails Tongue & groove extruded aluminum valance 2 wheels & retractable handle Color: Black Handles: 2 Spring Loaded Latches: 4 Recessed Twist Water Resistance: Gasket in Lid UPC Code: 716408504063 Interior Length: 16.50" Interior Width: 19.00" Interior Height: 7.00" Rackable Depth (to rear lid): 20.25" Rack Units: 4 Exterior Length: 25.75" Exterior Width: 21.50" Exterior Height: 11.00" Weight: 33.08 pounds

Black Gator Case (The case comes with a built in power supply as in picture, but the blue networking equipment is not included.) Standard 19in Rack Size Features: Molded PE Rack Case; Front, Rear Rails; 4U; 19" Deep; Locking, Pull Handle, Recessed Wheels; w/ Power Supply Lightweight polyethylene construction Threaded, field replaceable 7mm zinc-plated steel rack rails Front rear rack rails Heavy-duty twist latches Comfortable recessed side handles Master on/off switch with indicator light 5 outl

New with Full Manufacturer Warranty!When you're after no-compromise rackmount protection, LM Engineering has you covered with their ATA Series rack cases. These unbelievably rugged hard rack cases are crafted from 3/8"-thick plywood and are airplane-ready for your touring demands. LM Engineering has been designing and crafting heavy-duty shipping cases for 25 years each of them handbuilt in Youngstown, Ohio. Expect superior materials, expert craftsmanship, and protection you can trust when you

Universal Bottle Mounting Device Magnetic backed universal bottle mounting device allows for quick mounting. Use for eyewash, spray cans and even soda bottles. Holds up to 32 oz. bottle. Eyewash is not included. 5.20 L. 4.20 W. 3.20 H.