Highly reflective, flexible, encapsulated lens material, pre-coated with a pressure- sensitive adhesive. SOLAS grade products do not readily stretch, attaching them to highly elastic materials could result in rips or tears. 3M recommends against attaching these products to highly elastic materials. Designed for nighttime visibility of life support equipment such as life rafts Daytime color: silver (with ship wheel logo); reflected color: white Highly reflective when totally wet, as well as when viewed at wide entrance angles SOLAS Grade 3150A sticks to smooth surfaces of fiberglass; rubber, vinyl and PVC films; aluminum; performance varies: test first If Grade 3150A does not meet your adhesion requirements, SOLAS Grade 3155 has a higher adhesion rating and will stick to a wider variety... Less

M-Series - Dually D2 LED Single - Driving BeamPart #: 70131Rigid Industries LED lights are fast replacing conventional lighting in the marine industry. LED lighting is vastly more energy efficient than conventional marine lights. The amount of heat energy wasted is close to none, and the overall energy consumed is much less. As a result, battery powered LED lights last much longer than incandescent bulbs, once they are charged. LED lights, that depend on a vessels electrical system, also use much less power. Rigid Industries LED lights are significantly brighter than traditional bulbs.Among Marine LED's many advantages, heat production has reached an industry low, compared to conventional marine lighting. Consequently, the risk of burn injuries is virtually erased. Marine lights do not... Less

Provides a fast, convenient system for marking wire, cable, or vacuum hoses. Using the special end loop, it can be hooked on a belt or tool pouch. The small size also makes it easy to carry in a pocket or tool box. 10 refillable compartments allow you to choose the exact number or color combinations you need 49518 Number dispenser (shown) is filled with number 0 thru 9 49517 Colored dispenser filled with assorted colors Boat Adhesives & Caulking

Provides a fast, convenient system for marking wire, cable, or vacuum hoses. Using the special end loop, it can be hooked on a belt or tool pouch. The small size also makes it easy to carry in a pocket or tool box. 10 refillable compartments allow you to choose the exact number or color combinations you need 49518 Number dispenser (shown) is filled with number 0 thru 9 49517 Colored dispenser filled with assorted colors Boat Adhesives & Caulking

Provides a fast, convenient system for marking wire, cable, or vacuum hoses. Using the special end loop, it can be hooked on a belt or tool pouch. The small size also makes it easy to carry in a pocket or tool box. 10 refillable compartments allow you to choose the exact number or color combinations you need 49518 Number dispenser (shown) is filled with number 0 thru 9 49517 Colored dispenser filled with assorted colors Boat Adhesives & Caulking

General Purpose Safety Walk Tape consists of abrasive mineral particles bonded by a tough, durable polymer. The reverse side is coated with a pressure- sensitive adhesive covered by a removable protective liner. Designed for use in areas of heavy traffic, the mineral coated surface provides more bite than rubberized equivalents. The clear version satisfies the need for a non-skid safety product that coordinates with any color of substrate. Sharp textured, aluminum oxide mineral surface for extra traction - equivalent to 80 grit sandpaper Low-profile design reduces trip hazard Pressure- sensitive adhesive backing covered by removable protective liner These rolls fit in, and can be used as replacement rolls for, 3M Slip Resistant Surfacing display racks Paint & Epoxy Supplies

No. 6006 Multi-Gas Vapor Cartridge, NIOSH approved for: certain organic vapors, chlorine, hydrogen chlorine, chlorine dioxide, sulfur dioxide, hydrogen sulfide escape only ammoniamethylamin e, formaldehyde goggles must be worn with half facepiece respirators or hydrogen fluoride. Can be used with all 3M Half and Full Facepiece Respirators Sold and priced by the pair; 30 pairs per case Paint & Epoxy Supplies

M-Series - Dually D2 LED Pair - Driving BeamPart #: 70231Rigid Industries LED lights are fast replacing conventional lighting in the marine industry. LED lighting is vastly more energy efficient than conventional marine lights. The amount of heat energy wasted is close to none, and the overall energy consumed is much less. As a result, battery powered LED lights last much longer than incandescent bulbs, once they are charged. LED lights, that depend on a vessels electrical system, also use much less power. Rigid Industries LED lights are significantly brighter than traditional bulbs.Among Marine LED's many advantages, heat production has reached an industry low, compared to conventional marine lighting. Consequently, the risk of burn injuries is virtually erased. Marine lights do not emit... Less

Use this product for producing a high gloss finish on marine 2-part polyurethane paints. Polish using an air or electric buffer (1,000 - 2,500 RPM) equipped with a 3M convoluted Perfect-It Foam Polishing Pad (5725) for a wheel-mark-free finish Great for dark colors where imperfections show easily Good handling with easy cleanup Boat Cleaners

With 3M Cold Shrink Tubing you get a flexible, water-resistant seal without heat, torches or adhesives. To install, simply positon the tubing over the splice, and pull the tab to unwind the spiral wound core. It's that simple; no tools required. Consists of open-ended EPDM rubber sleeves which are factory expanded and assembled onto removable plastic cores. The core is removed after the tube has been positioned for installation over an inline connection or terminal lug, allowing the tube to shrink back to its normal size, forming a flexible, water-resistant seal. Ideal for insulating and protecting large diameter cable splices Can be used on tool handles and tool grips Meets water seal requirements of ANSI C119-1 and Western Underground Guide 2.14 for secondary splices rated up to 1KV... Less