Dispenser with replaceable atomizing heads for use with the 3M Accuspray Spray Gun Model HG09. Dispenser with 2 refill kits, 4 atomizing heads per kit.

Epoxy Adhesive, Duo-pak, Size 200 Ml, Gray, Temp Range -67 To 300 F, Curing Time 20 Minutes, Application Time 8 Minutes, Viscosity 55,000, Specific Gravity 1.11, Shear Strength 3,500 Psi, Substrates Metals, Ceramics And Many Plastics, Fast-setting, Flexible, Two-part Adhesive. Excellent Peel Strength And Shock And Impact Resistance, May Be Applied With Spatula, Trowel, Or Flow Equipment, Package Quantity 12

Provides the ability to test the 3M Accuspray Spray Gun Model HG09, part number 16570, for HVLP compliance.

CRL Gray M64 Polyurethane Construction Sealant - Cartridge CRL M64 is a high performance, low modulus, one-component, moisture curing, modified polyurethane sealant. It has a smooth, even consistency and surface when cured. M64 requires no priming for common substrates such as brick, concrete, aluminum, wood, and granite. It applies with any standard cartridge size caulking gun to clean, dry surfaces. One-Part Smooth Finish Formula with Primerless Adhesion on Most Common Construction Surfaces AAMA Approved Excellent Performance in Moving Joints Sealant Estimator Chart Basic Uses CRL M64 was specifically developed for sealing dynamically moving joints, such as: expansion and control joints, precast concrete panel joints, curtainwall joints, perimeter caulking (masonry, windows, doors,... Less

One-Part Smooth Finish Formula with Primerless Adhesion on Most Common Construction Surfaces +100% to -50% Joint Movement Capability CRL M64 Polyurethane is a high performance, low modulus, one-component, moisture curing modified polyurethane sealant. It has a smooth, even consistency and surface when cured. M64 requires no priming for common substrates such as brick, concrete, aluminum, wood and granite. It applies with any standard cartridge caulking gun to clean, dry surfaces. M64 was specifically developed for sealing dynamically moving joints, such as: expansion and control joints, precast concrete panel joints, curtainwall joints, perimeter caulking (masonry, windows, doors, panels), bedding of mullions, panels and frames. It is compatible with I.G. sealants when glazing units and... Less

Epoxy Adhesive, Duo-pak, Size 400 Ml, Translucent, Temp Range -67 To 300 F, Curing Time 20 Minutes, Application Time 8 Minutes, Viscosity 50,000, Specific Gravity 1.10, Shear Strength 2,500 Psi, Substrates Metals, Ceramics And Many Plastics, Fast-setting, Flexible, Two-part Adhesive Excellent Peel Strength And Shock And Impact Resistance, May Be Applied With Spatula, Trowel, Or Flow Equipment, Package Quantity 6

Call Toll Free 1-866-513-5799, Mon-Fri 8-9, Sat and Sun 10-5 EST About Us Product Details Store Policy More In Sealant Adhesives 3M Caulking Gun 8117 OUR SKU# TM3939 MPN: 3M8117 Condition Brand New Shipping Free Shipping Leaves warehouse within 24 hours With a transit time of 1-5 business days Standard Ground (e.g. UPS, FedEx). Please note that this product cannot be shipped to Alaska, Hawaii, or Puerto Rico. We apologize for the inconvenience. Click here to read full description of delivery me

Fire Barrier Silicone Cartridge, 2000+, Container Size 10.3 Oz, Silicone Material, For Use With Conventional Caulking Gun, Color Gray, Fire Rating 4 Hour, Ul Classified Standards, Package Quantity 12

Fire Barrier Silicone Pail, 2000+, Container Size 4.5 Gal, Silicone Material, For Use With Conventional Caulking Gun, Color Gray, Fire Rating 4 Hour, Ul Classified Standards

Also known as cap nuts, Acorn Nuts cover exposed threads and provide a finished appearance. Hex drive systems are driven with a wrench.Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).A threaded fastener's size name includes information about the major external diameter (in millimeters), followed by the thread pitch (millimeters per thread), which indicates if it is coarse or fine. Coarse threads are better... Less

3MTM Fire Barrier CP 25WB+ Caulk is a premium elastomeric latex caulk designed for use as a one-part fire, smoke, noxious gas and water sealant. In addition, the unique intumescent property of this material (expands when heated) means that as cable or pipe insulation is consumed by fire, CP 25WB+ Caulk expands to maintain the penetration seal. 3M Fire Barrier CP 25WB+ Caulk can be installed with a standard caulking gun, pneumatic pumping equipment or it can be easily applied with a putty knife or trowel. CP 25WB+ Caulk will bond to concrete, metals, wood, plastic and cable jacketing. No mixing is required.

Fire Barrier Sealant, Cartridge, Container Size 10.1 Oz., For Use With Conventional Caulking Gun, Color Limestone, Fire Rating Up To 3 Hours, Ul Classified

CRL Off White M64 Polyurethane Construction Sealant - Cartridge CRL M64 is a high performance, low modulus, one-component, moisture curing, modified polyurethane sealant. It has a smooth, even consistency and surface when cured. M64 requires no priming for common substrates such as brick, concrete, aluminum, wood, and granite. It applies with any standard cartridge size caulking gun to clean, dry surfaces. One-Part Smooth Finish Formula with Primerless Adhesion on Most Common Construction Surfaces AAMA Approved Excellent Performance in Moving Joints Sealant Estimator Chart Basic Uses CRL M64 was specifically developed for sealing dynamically moving joints, such as: expansion and control joints, precast concrete panel joints, curtainwall joints, perimeter caulking (masonry, windows, doors,... Less

Sandblaster, 4.5", Quick Change Hub Adapter For Right Angle Grinder, Fits 4.5" and 5" Right Angle Grinders With A 5/8"-11 Thread Per Inch External Shaft Size, Attaches Easily, Spin On/Off Sanding Discs In Seconds, Makes Changing Discs A Snap, Quickly Attach A Variety Of Versatile Grinding, Sanding, and Finishing Discs Without The Need For Wrenches, Provides Support While Also Allowing Some Flexibility To Finish Contoured Or Curved Surfaces, Use With Sandblaster Right Angle Grinder Discs, Model #9677, #9678, #9679, #9680, #9681 and #9682.

One-Part Smooth Finish Formula with Primerless Adhesion on Most Common Construction Surfaces +100% to -50% Joint Movement Capability CRL M64 Polyurethane is a high performance, low modulus, one-component, moisture curing modified polyurethane sealant. It has a smooth, even consistency and surface when cured. M64 requires no priming for common substrates such as brick, concrete, aluminum, wood and granite. It applies with any standard cartridge caulking gun to clean, dry surfaces. M64 was specifically developed for sealing dynamically moving joints, such as: expansion and control joints, precast concrete panel joints, curtainwall joints, perimeter caulking (masonry, windows, doors, panels), bedding of mullions, panels and frames. It is compatible with I.G. sealants when glazing units and... Less

Cable Clip, Hammer On Flange, Snap Close, Cable Size 3/8 In, Steel, Max Load 75 Lbs, Finish Zinc Phosphate, Flange Size 5/16 To 1/2 In, Armored Cable Supported Below, Rotates 360 Degrees

Cable Clip, Hammer On Flange, Snap Close, Cable Size 3/8 In, Steel, Max Load 75 Lbs, Finish Zinc Phosphate, Flange Size 1/8 To 1/4 In, Armored Cable Supported Below, Rotates 360 Degrees

Scraper Mat, Unbacked, Size 3 X 5 Ft, Size 36 X 60 In, Thickness 0.45 Inches, Color Gray, Vinyl, Open Z-web Construction, Continuous Pattern Design, Four Side Edges

Also known as cap nuts, Acorn Nuts cover exposed threads and provide a finished appearance. Hex drive systems are driven with a wrench.Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).A threaded fastener's size name includes information about the major external diameter (in millimeters), followed by the thread pitch (millimeters per thread), which indicates if it is coarse or fine. Coarse threads are better... Less

Also known as cap nuts, Acorn Nuts cover exposed threads and provide a finished appearance. Hex drive systems are driven with a wrench.Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).A threaded fastener's size name includes information about the major external diameter (in millimeters), followed by the thread pitch (millimeters per thread), which indicates if it is coarse or fine. Coarse threads are better... Less

One-Part Smooth Finish Formula with Primerless Adhesion on Most Common Construction Surfaces Excellent Performance in Moving Joints +100% to -50% Joint Movement Capability CRL M64 Polyurethane is a high performance, low modulus, one-component, moisture curing modified polyurethane sealant. It has a smooth, even consistency and surface when cured. M64 requires no priming for common substrates such as brick, concrete, aluminum, vinyl, wood and granite. It applies with any standard cartridge caulking gun to clean, dry surfaces. M64 was specifically developed for sealing dynamically moving joints, such as: expansion and control joints, precast concrete panel joints, curtainwall joints, perimeter caulking (masonry, windows, doors, panels), bedding of mullions, panels and frames. It is... Less

Advanced Non-Yellowing Formulation One-Part Smooth Finish Formula with Primerless Adhesion on Most Common Construction Surfaces Low Odor, Contains No Isocyanates and Low VOC's CRL M65W PermaWhite is a high performance, medium modulus, fast curing, paintable, one-component, moisture curing modified polyurethane sealant. It has a smooth, even consistency and surface when cured. M65W requires no priming for common substrates such as brick, concrete, aluminum, wood and granite. It applies with any standard cartridge caulking gun to clean, dry surfaces. M65W was specifically developed for sealing dynamically moving joints, such as: expansion and control joints, precast concrete panel joints, curtainwall joints, perimeter caulking (masonry, windows, doors, panels), bedding of mullions, panels... Less

HTB - HTD Timing Belt Oil, heat and abrasion- resistant. Manufactured By Jason Industrial PART NUMBER BELT LENGTH PITCH LENGTH BELT WIDTH NUMBER OF TEETH 480-8M-05 480 mm 8M 5 mm 60 480-8M-09 480 mm 8M 9 mm 60 480-8M-10 480 mm 8M 10 mm 60 480-8M-11 480 mm 8M 11 mm 60 480-8M-12 480 mm 8M 12 mm 60 480-8M-13 480 mm 8M 13 mm 60 480-8M-15 480 mm 8M 15 mm 60 480-8M-16 480 mm 8M 16 mm 60 480-8M-19 480 mm 8M 19 mm 60 480-8M-20 480 mm 8M 20 mm 60 480-8M-21 480 mm 8M 21 mm 60 480-8M-22 480 mm 8M 22 mm 60 480-8M-25 480 mm 8M 25 mm 60 480-8M-30 480 mm 8M 30 mm 60 480-8M-35 480 mm 8M 35 mm 60 480-8M-36 480 mm 480-8M-40 Stock 8 mm pitch HTB timing belts are listed above.

CRL Bronze M64 Polyurethane Construction Sealant - Sausage (15 Pack) CRL M64 is a high performance, low modulus, one-component, moisture curing, modified polyurethane sealant. It has a smooth, even consistency and surface when cured. M64 requires no priming for common substrates such as brick, concrete, aluminum, wood, and granite. It applies with any standard cartridge size caulking gun to clean, dry surfaces. One-Part Smooth Finish Formula with Primerless Adhesion on Most Common Construction

SquareTrade © AP6.0 Dainippon M File 80B SSNozzle with SMC CXSL10-45-Y59A New (Not in Original Packaging) 14 Day DOA Warranty STORE LOCATION ED Absolute. Has used its best efforts to inspect the item(s) for sale and create descriptions and furnish photographs that fairly and adequately depict the type, condition and image of the goods at the time of sale. Absolute makes no expressed or implied warranties or representations regarding the condition or suitability of the goods and to the extent a

Also known as cap nuts, Acorn Nuts cover exposed threads and provide a finished appearance. Hex drive systems are driven with a wrench.Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).A threaded fastener's size name includes information about the major external diameter (in millimeters), followed by the thread pitch (millimeters per thread), which indicates if it is coarse or fine. Coarse threads are better... Less

Also known as cap nuts, Acorn Nuts cover exposed threads and provide a finished appearance. Hex drive systems are driven with a wrench.Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).A threaded fastener's size name includes information about the major external diameter (in millimeters), followed by the thread pitch (millimeters per thread), which indicates if it is coarse or fine. Coarse threads are better... Less

Exhaust Fan, Medium Duty Belt Drive With Drive Package, Propeller Dia 24 In, Cfm @ 0.000-in Sp 7927, @ 0.125-in Sp 7296, @ 0.250-in Sp 6514, Sones @ 0.000-in Sp @ 5 Ft 19.8, Max Inlet Temp 104 Deg F, Voltage 115/230, 60 Hz, 1 Phase, Motor Hp 3/4, Bearing Type Regreaseable Cast Pillow Block, Fan Rpm 844, Height 28 In, Width 28 In, Max Depth 18 In, Mounting Position Vertical Or Horizontal, Frame Material Galvanized Steel, Propeller Material Fabricated Steel

Sandblaster, 4.5", Quick Change Hub Adapter For Right Angle Grinder, Fits 4.5" and 5" Right Angle Grinders With A 5/8"-11 Thread Per Inch External Shaft Size, Attaches Easily, Spin On/Off Sanding Discs In Seconds, Makes Changing Discs A Snap, Quickly Attach A Variety Of Versatile Grinding, Sanding, and Finishing Discs Without The Need For Wrenches, Provides Support While Also Allowing Some Flexibility To Finish Contoured Or Curved Surfaces, Use With Sandblaster Right Angle Grinder Discs, Model #9677, #9678, #9679, #9680, #9681 and #9682.

Lock Nuts are commonly used when spinning of components would be a problem. They are designed to interlock with the locking surface for a secure hold, without slippage. Hex drive systems are driven with a wrench.Steels are designated by a 4 number SAE Steel grade. The first two digits indicate the primary materials used to form the steel. The last 2 digits identify the percentage of carbon for the alloy (in hundredths). The steel used in these fasteners has a tensile strength ranging from 100,000 to 150,000 psi (pounds per square inch).A threaded fastener's size name includes information about the major external diameter (in millimeters), followed by the thread pitch (millimeters per thread), which indicates if it is coarse or fine. Coarse threads are better when working with... Less