4 Wheeler Motor Home and Garden - Shopping.com
Showing results for "4 wheeler motor"
Results 1 - 40 of 372

Wheeler-rex 6790 Threading...

$9,121.99
eBay Wheeler-rex 6790 Threading Machine 1/2- 4
Free Shipping
/wheelerrex-6790/aFraBb6pMFXsrSF7I2ISug==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Wheeler-Rex 6790 Threading Machine 1/2- 4 $9121.99 ea. Wheeler-Rex 6790 Threading Machine 1/2-4 The 6790 features a self-opening die head, with through die head oiling. Ultimate accuracy with quick changes between pipe sizes, producing quality threads. The 6790 offers adjustable thread length, three-stage oil filtration system, and a sturdy three flute reamer that covers the entire 1/2- 4 range. The 6790 is a three speed machine that is powered by a durable condenser motor, with an extremely low noise level. Completely equipped to cut, thread, and ream. Features: For 1/2 to 4 pipe, 110V/120V or 220V/230V, single phase 1KW condenser motor, average noise level: 72db, maximum amperage under load: 18.5 no load RPM: 15/27/48 Includes: Two die heads: 1/2-2 and 2-1/2-4, three sets of NPT dies:... Less
More

Wheeler Engineering...

$13.99
MidwayUSA Wheeler Engineering Level-Level-Level Scope Crosshair Leveling Tool
+ $4.99 shipping
/wheeler-engineering/BzxXICgv1m9ACjk7jgsmeA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The simplest, most accurate scope leveling system ever devised to level your scope as you mount it on your rifle. The magnetic base in the rifle level bridges the bolt raceway, allowing you to position your rifle almost perfectly level. Then level the scope, tighten the rings and the job is done. Works with practically any bolt-action rifle. Set includes two levels. Searches for products like these typically include: Optics,Scope Mounting, Alignment, Leveling & Other Tools
More

Wheeler Engineering Fat...

$44.99
Brownells Wheeler Engineering Fat Wrench - Fat Wrench W/10 Bit Set
+ $3.95 shipping
/wheeler-engineering-fat/gWLGimyGIMWuCoTNKOdM5g==/info
Brownells
IN_STOCK ( In stock )
Store not rated
FAT Wrench w/10 Bit Set: Wheeler's FAT Wrench brings perfect consistency to every screw on your rifle! This amazing handheld torque wrench lets you apply repeatable, accurate torque settings to scope rings, guard screws and other screws, which aids in accuracy and decreases the opportunity for problems in the field. The FATWrench is a perfect compliment to the Deluxe Gunsmithing Screwdriver Sets. Together, they can ensure accurate tightening of most every screw on any gun in your collection. Torque adjustments range from 10 inch pounds to 65 inch pounds Accuracy plus/minus 2 inch pounds 1/4 drive Plastic Mfg: Wheeler Engineering
More

Wheeler-rex 4991 1/4-inch To...

$148.08
eBay Wheeler-rex 4991 1/4-inch To 2-3/8-inch Close Quarters Cutter, New, Free Shippin
Free Shipping
/wheelerrex-4991-14inch/HlHBTc_FGe_A2zfVo2tDWw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Description New Wheeler-Rex 4991 1/4-Inch to 2-3/8-Inch Close Quarters Cutter by Wheeler-Rex Product Description Since 1957, the Wheeler-Rex line of hand and power tools has consistently included innovative tool design and engineering features available nowhere else. Brand: Wheeler-Rex UPC: 662933154153 MPN: 4991 Model: 4991 Product Features Designed for plumbing remodeling, commercial boiler and air conditioning jobs, where standard cutters simply dont have the room Cuts thin-wall material like traps and tailpieces with no distortion Good for under vanities, close to walls, waste and overflows Eliminates sawing which can loosen joints. One cutter wheel (No. 8038) cuts both plastic and non-ferrous materials. for 1/4-Inch to 2 3/8-Inch (6-59mm) O.D. Terms of Sale All of our products come... Less
More

Wheeler Rex 1 1/2 Npt 4 Pc...

$24.95
eBay Wheeler Rex 1 1/2 Npt 4 Pc Dies For 11r 12r 30a 31a
Free Shipping
/wheeler-rex-1-12-npt-4/OIHujCGSFQsOGtjBhc7iNw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
WHEELER REX 1 1/2 NPT ALLOY DROP HEAD DIE SET 837845 for Ridgid & Wheeler     Brand New is Original Package, not opened or used! FREE SHIPPING IN THE U.S.A.! MODEL #837845 LIST PRICE $90.00                                                                                                                                                                                                                                                                                                                                                                                        You are bidding on a Brand New WHEELER REX 1 1/2 NPT ALLOY DROP HEAD DIE SET 837845 for Ridgid.  Please visit our eBay Store for the Threading Machine and the other types and sizes of dies in stock at this time.   Thank you for... Less
More

Wheeler Engineering...

$62.41
eBay Wheeler Engineering Professional Digital Trigger Gauge
Free Shipping
/wheeler-engineering/cqrFeUUh2vZ7thGzMms3Og==/info
eBay
IN_STOCK ( In stock )
Free Shipping
The Wheeler Professional Digital Trigger Gauge makes measuring the trigger pulls of your weapon and easy and efficient task. The gauge measures trigger pulls in pounds or kilograms and records the MAX and MIN trigger pull as well as the number of trigger pulls within session. Provides +/- .1 oz. accuracy with a load sensor directly contacting the trigger and a 0-12 lbs. range. Offers and ergonomic over molded design and soft touch buttons for easy handling. The arm folds inside the housing to protect the load sensor when not in use. Our eBay Store Contact Us Wheeler Engineering Professional Digital Trigger Gauge The Wheeler Professional Digital Trigger Gauge makes measuring the trigger pulls of your weapon and easy and efficient task. The gauge measures trigger pulls in pounds or... Less
More

Wheeler-rex Valve Wheel...

$64.79
eBay Wheeler-rex Valve Wheel Wrench, 3/4 X 8-1/2 In, Red 8708
Free Shipping
/wheelerrex-valve-wheel/FCyqwuT_Ko1lnn6WNVjToA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Valve Wheel Wrench, 3/4 x 8-1/2 in, Red 8708 Model: 8708 Made in: China Manufacturer: Wheeler-Rex Weight: 0.55 pounds Material: Cast Aluminum Size: 3/4 Item: Single-End Valve Wheel Wrench, Size: 3/4, Length: 8-1/2, Material: Cast Aluminum, Finish: Red Payment: We accept the following forms of payment.   Shippi ng: Most of our Items ship within 2-3 Business Days (Weekends not included)   Poste d domestic shipping/handling rates, as well as “free shipping” offers are applicable to the contiguous 48 United States only; military addresses, and other US territories are exempt from free shipping offers, unless otherwise specifically stated. Contact us for a shipping quote if there is no shipping rate posted for your location. Saturday, Sunday, and national holidays are not business days and... Less
More

Wheeler-rex 60338 3/4...

$237.99
eBay Wheeler-rex 60338 3/4 Grooving Dies (fits 60117 Die Head)
+ $8.93 shipping
/wheelerrex-60338-34/aXcIpSEa-yMYuO8STTIijw==/info
eBay
IN_STOCK ( In stock )
Wheeler-Rex 60338 3/4 Grooving Dies (fits 60117 Die Head) $237.99 ea. Wheeler-Rex 60338 3/4 Grooving Dies (fits 60117 Die Head) * Manufactured from TOOL STEEL * For 3/4 pipe * National Pipe Thread taper (NPT) * Designed to fit Wheeler Die Head #60117 * Dies come in sets of 4 (numbered 1-4) FastoolNow on eBay | 1-888-654-8898
More

Wheeler-rex 60115 1/4 - 2...

$506.99
eBay Wheeler-rex 60115 1/4 - 2 Manual Opening For Threader 6790
+ $10.51 shipping
/wheelerrex-60115-14-2/n2ROIU4xRhjgT3zQt1kcJg==/info
eBay
IN_STOCK ( In stock )
Wheeler-Rex 60115 1/4 - 2 Manual Opening for Threader 6790 $506.99 ea. Wheeler-Rex 60115 1/4 - 2 NPT Die Head, Manual Opening for Threader 6790 * Manual Opening National Pipe Thread Taper (NPT) Die Head * For 1/4 - 2 pipe * Die Head to be used with Threader 6790 * Threading die that is used in high volume production of threaded components * Commonly used on lathes, screw machines, turret lathes, and CNC (Computer Numerical Control) machining lathes * Die heads may be used for rolling a thread or cutting a thread **Threading Machines sold separately FastoolNow on eBay | 1-888-654-8898
More

Wheeler Engineering Lapping...

$13.99
MidwayUSA Wheeler Engineering Lapping Compound 220 Grit (Cutting) 1 oz
+ $4.99 shipping
/wheeler-engineering/uA1vn1s--2wmSNH1fz4Qpg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
A high quality silicon carbide abrasive paste that is used for lapping the bore of a firearm, the bolt face, bolt lugs and a hundred other uses where a perfect final fit or a lapped smooth surface is needed. When lapping a bore, pressure will likely increase with grit impregnated bullets. Due to the likely increase of pressure, light loads are recommended. Five shot strings up to a maximum of twenty shots of each grit are recommended. Repeating the process using progressively finer grits will produce a significantly smoother bore. Searches for products like these typically include: Gunsmithing Supplies,Bore Lapping & Bore Conditioners
More

Wheeler-rex 60228 4 Grooving...

$511.99
eBay Wheeler-rex 60228 4 Grooving Dies (fits 60123 Die Head)
+ $8.93 shipping
/wheelerrex-60228-4/pOgqsYu01CxTQxAT_B4E3g==/info
eBay
IN_STOCK ( In stock )
Wheeler-Rex 60228 4 Grooving Dies (fits 60123 Die Head) $511.99 ea. Wheeler-Rex 60228 4 Grooving Dies (fits 60123 Die Head) * Manufactured from TOOL STEEL * For 4 pipe * National Pipe Thread taper (NPT) * Designed to fit Wheeler Die Head #60123 * Dies come in sets of 4 (numbered 1-4) FastoolNow on eBay | 1-888-654-8898
More

Wheeler-rex 90730 Tubing...

$55.99
eBay Wheeler-rex 90730 Tubing Cutter 1/8 - 1-3/4 For Stainless
+ $8.62 shipping
/wheelerrex-90730-tubing/4t6Bg4nCsCmlCTzBGS7J2Q==/info
eBay
IN_STOCK ( In stock )
Wheeler-Rex 90730 Tubing Cutter 1/8 - 1-3/4 For Stainless $55.99 ea. Wheeler-Rex 90730 Tubing Cutter 1/8 - 1-3/4 For Stainless Stainless Steel Tubing Cutters, Specially designed for cutting stainless steel. All three models have a steel feed screw system and use specially designed cutter wheels with needle bearings for durability and longevity. No tools are required to change the cutter wheel and wheel pin. Specifications 1/8 to 1-3/4 Tubing Cutter Weight .9lbs (.41Kg) Replacement Cutter Wheel 90799 FastoolNow on eBay | 1-888-654-8898
More

Wheeler-rex 62001 3/4 Npt...

$199.99
eBay Wheeler-rex 62001 3/4 Npt Nipple Chuck
+ $9.09 shipping
/wheelerrex-62001-34-npt/6upHez1HGsQAmwx1qn5hZQ==/info
eBay
IN_STOCK ( In stock )
Wheeler-Rex 62001 3/4 NPT Nipple Chuck $199.99 ea. Wheeler-Rex 62001 3/4 NPT Nipple Chuck FastoolNow on eBay | 1-888-654-8898
More

Wheeler-rex 4991 Close...

$120.99
eBay Wheeler-rex 4991 Close Quarters Tubing Cutter 1/4 - 2-3/8
+ $8.93 shipping
/wheelerrex-4991-close/NZi_L_jQRPIghqiwkcWUdw==/info
eBay
IN_STOCK ( In stock )
Wheeler-Rex 4991 Close Quarters Tubing Cutter 1/4 - 2-3/8 $120.99 ea. Wheeler-Rex 4991 Close Quarters Tubing Cutter 1/4 - 2-3/8 Designed for plumbing remodeling, commercial boiler and air conditioning jobs, where standard cutters simply don't have the room. Cuts thin-wall material like traps and tailpieces with no distortion. Good for under vanities, close to walls, waste and overflows. Eliminates sawing which can loosen joints. Features One cutter wheel cuts both plastic and non-ferrous materials. Specifications For 1/4 to 2-3/8 (6-59mm) O.D. non-ferrous tube and plastic pipe and tube. Weight 1.5lbs (.7Kg) 8038 Replacement Cutter Wheel FastoolNow on eBay | 1-888-654-8898
More

Wheeler-rex 60211 1/2 - 3/4...

$127.99
eBay Wheeler-rex 60211 1/2 - 3/4 Npt Threading Dies For 60130 Die Head
+ $8.93 shipping
/wheelerrex-60211-12/R1w9XVLg2gp0o2640RIFTg==/info
eBay
IN_STOCK ( In stock )
Wheeler-Rex 60211 1/2 - 3/4 NPT Threading Dies for 60130 Die Head $127.99 ea. Wheeler-Rex 60211 1/2 - 3/4 NPT Threadiing Dies for 60130 Die Head * Manufactured from TOOL STEEL * For 1/2 - 3/4 pipe * National Pipe Thread taper (NPT) * Designed to fit Wheeler Die Head #60130 * Dies come in sets of 4 (numbered 1-4) **This die set is included with 6990 Pony Threading Machine (Threading machine is not included with this 60211 die) FastoolNow on eBay | 1-888-654-8898
More

Wheeler-rex 6798 Threading...

$9,330.99
eBay Wheeler-rex 6798 Threading Machine 1/2- 4 220v
Free Shipping
/wheelerrex-6798/TgFcdQ5gzJZuLErTiyHzsg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Wheeler-Rex 6798 Threading Machine 1/2- 4 220V $9330.99 ea. Wheeler-Rex 6798 Threading Machine 1/2-4 220V FastoolNow on eBay | 1-888-654-8898
More

Wheeler Engineering Lapping...

$34.99
MidwayUSA Wheeler Engineering Lapping Compound Kit (1 oz each of 220, 320, 600 Grit Compound)
+ $4.99 shipping
/wheeler-engineering/lECbHRLshhXwuIe8D9DV8Q==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
A high quality silicon carbide abrasive paste that is used for lapping the bore of a firearm, the bolt face, bolt lugs and a hundred other uses where a perfect final fit or a lapped smooth surface is needed. When lapping a bore, pressure will likely increase with grit impregnated bullets. Due to the likely increase of pressure, light loads are recommended. Five shot strings up to a maximum of twenty shots of each grit are recommended. Repeating the process using progressively finer grits will produce a significantly smoother bore. Searches for products like these typically include: Gunsmithing Supplies,Bore Lapping & Bore Conditioners
More

Wheeler-rex 982 1-1/4-inch...

$53.19
eBay Wheeler-rex 982 1-1/4-inch 6-point Heavy Duty Deep Socket
Free Shipping
/wheelerrex-982/tMv1WHiHZXzmycdvvuT3gA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Wheeler-Rex 982 1-1/4-Inch 6-Point Heavy Duty Deep Socket Description Designed for tightening hex nuts on repair clamps, mechanical joint fittings, and saddles. Large diameter barrels make fast hand tightening easy. Operates with any 1/2-Inch drive manual or impact wrench. Eleven individual kits are available. From the Manufacturer Designed for tightening hex nuts on repair clamps, mechanical joint fittings, and saddles. Large diameter barrels make fast hand tightening easy. Operates with any 1/2-Inch drive manual or impact wrench. Eleven individual kits are available. Features Deep Socket 6-Point 1.25-Inch socket Made by Wheeler-Rex Product Details Part Number: 982 Item Weight: 1.2 pounds Product Dimensions: 6.2 x 1.2 x 1.2 inches Origin: USA California residents: Click here for... Less
More

Wheeler-rex 591-6 Manual Pipe...

$614.99
eBay Wheeler-rex 591-6 Manual Pipe Cutter, 4- 6 Capacity
+ $14.26 shipping
/wheelerrex-5916-manual/wmcWysFaSYlH9cawhlctdA==/info
eBay
IN_STOCK ( In stock )
Wheeler-Rex 591-6 Manual Pipe Cutter, 4- 6 Capacity $614.99 ea. Wheeler-Rex 591-6 Manual Pipe Cutter, 4-6, 24 lbs Specifications: Service (Std) WT Soil Pipe: 1-1/2-6 (38mm-150mm) XH Soil Pipe: 1-1/2-5 (38mm-125mm) No-Hub: 1-1/2-6 (38mm-150mm) Tile/Clay: 4- 6 (100mm-150mm) Shipping Weight: 24 lbs. (11kg) FastoolNow on eBay | 1-888-654-8898
More

Wheeler-rex 6590 Threading...

$14,436.00
eBay Wheeler-rex 6590 Threading Machine 2-1/2 - 6
Free Shipping
/wheelerrex-6590/2qzZ_5Je5uhH0UcsubFLlQ==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Wheeler-Rex 6590 Threading Machine 2-1/2 - 6 $14435.99 ea. Wheeler-Rex 6590 Threading Machine 2-1/2 - 6 This machine has self opening notch type die heads with through die head oiling. These die heads offer accuracy and quick changes between pipe sizes, while providing quality threads. The 6590 is totally gear driven and powered by a condenser motor, producing extremely low noise levels. Quiet operation permits use in hospitals, factories, and in other locations where noise can be a problem. Completely equipped to cut, thread, and ream. Features: For 2 1/2 to 6 pipe, 110/120V or 220V/230V, single phase .75KW condenser motor, average noise level: 76db, maximum amperage under load: 14.5, no load RPM: 6.1/20.2 Includes: Two die heads: 2-1/2-4 and 5- 6, two sets of NPT dies: 2-1/2- 4, and 5-... Less
More

Wheeler Engineering Lapping...

$13.99
MidwayUSA Wheeler Engineering Lapping Compound 600 Grit (Polishing) 1 oz
+ $4.99 shipping
/wheeler-engineering/1hpO7igVrb-e0PQB2gcq-g==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
A high quality silicon carbide abrasive paste that is used for lapping the bore of a firearm, the bolt face, bolt lugs and a hundred other uses where a perfect final fit or a lapped smooth surface is needed. When lapping a bore, pressure will likely increase with grit impregnated bullets. Due to the likely increase of pressure, light loads are recommended. Five shot strings up to a maximum of twenty shots of each grit are recommended. Repeating the process using progressively finer grits will produce a significantly smoother bore. Searches for products like these typically include: Gunsmithing Supplies,Bore Lapping & Bore Conditioners
More

Wheeler-rex 43310 Ratchet &...

$89.99
eBay Wheeler-rex 43310 Ratchet & Handle
+ $9.90 shipping
/wheelerrex-43310-ratchet/3ZeRzIGwHphHuU6X-F7EmA==/info
eBay
IN_STOCK ( In stock )
Wheeler-Rex 43310 Ratchet & Handle $89.99 ea. Wheeler-Rex 43310 RATCHET & HANDLE Wheeler-Rex Drop Heads and Dies are ideal for in-place threading from 1/2 - 2 and are designed to fit Wheeler Ratchet Handle 43310 as well as the Ridge Tool Company Models 12R, OO-R, 111-R, O-R, 30A & 31A, 700 Power Drives, Reed Mfg. DHR12 Series Drop Heads and Berkley Tool BT40000 Series Drop Heads. Specifications Ratchet Handle 8lbs (3.6kg) FastoolNow on eBay | 1-888-654-8898
More

Wheeler Engineering Roll Pin...

$23.90
eBay Wheeler Engineering Roll Pin Starter Punch Set
Free Shipping
/wheeler-engineering-roll/7usXz6zOzm9W4Bau1j8G-g==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Wheeler Engineering Roll Pin Starter Punch Set     Descripti on Brand New. Wheeler Engineering Roll Pin Starter Punch Set 9-Piece set 1/16 through 5/16 Hardened steel construction Beveled tip for Starting the roll pin Fitted Nylon storage pouch The Wheeler engineering roll pin Starter punch set are machined from hardened steel to prevent bending or breaking while driving any size roll pin. The punches are designed with a beveled tip to provide proper alignment of the roll pin in the punch. The 9 piece set includes: 5/16, 1/4, 7/32, 3/16, 5/32, 1/8, 3/32, 5/64, 1/16 punches in a nylon pouch. Payment Payment accepted through Paypal. Shipping FREE SHIPPING to the continental United States. Please make sure shipping address is correct when checking out as the address cannot be changed after... Less
More

Wheeler 89 Piece Gunsmith Kit...

$60.46
eBay Wheeler 89 Piece Gunsmith Kit 562-194
Free Shipping
/wheeler-89-piece-gunsmith/GX-80QgWQYLKGnfFLy94IA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Payment and Shipping Returns FAQs HUNTING FISHING CAMPING KNIVES OPTICS Please note: product images are provided to us by the manufacturer and sometimes do not represent the exact color, size, or style of the actual item. Wheeler 89 Piece Gunsmith Kit 562-194 Wheeler 89 Pc Pro Gunsmithing Screwdriver Set 562-194. Wheeler's Deluxe Gunsmithing Screwdriver Set is the kit that belongs on every gunsmithing bench - the well thought-out bit selection will put an end to burred, buggered, busted up screw slots on any gun that comes your way. The bits make up the heart of any screwdriver set, and Wheeler's are the finest available. They're made from S2 tool steel and hardened to 56-58 Rockwell. Unlike other screwdriver suppliers, Wheeler's engineers measured the screws on over one hundred modern... Less
More

Wheeler-rex 43300 Metal...

$157.99
eBay Wheeler-rex 43300 Metal Carrying Case
+ $12.61 shipping
/wheelerrex-43300-metal/JiPSR2mRzip_sa1_AxXvCg==/info
eBay
IN_STOCK ( In stock )
Wheeler-Rex 43300 Metal Carrying Case $157.99 ea. Wheeler-Rex 43300 METAL CARRYING CASE Wheeler-Rex Drop Heads and Dies are ideal for in-place threading from 1/2 - 2 and are designed to fit Wheeler Ratchet Handle 43310 as well as the Ridge Tool Company Models 12R, OO-R, 111-R, O-R, 30A & 31A, 700 Power Drives, Reed Mfg. DHR12 Series Drop Heads and Berkley Tool BT40000 Series Drop Heads. Specifications Replacement Carrying Case 17lbs (7.7kg) FastoolNow on eBay | 1-888-654-8898
More

Wheeler Engineering...

$16.39
eBay Wheeler Engineering Gunsmithing 1 2 Sided Nylon/brass Hammer
Free Shipping
/wheeler-engineering/lYwjqm9cHiXhjRFWSK3_tQ==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Wheeler Engineering 2 Sided Nylon/Brass Hammer - MPN: 711016 Likely to become your favorite hammer at the bench or on the range. Nylon face is non-marring and is great for alignment and other uses where a steel hammer is not appropriate. Brass face can be used for driving pins and punches, and a multitude of other uses. 11″ overall. Absolutely brand new in factory packaging!!! Thanks and have a good day! Thank you for shopping with Johnsonscs! Check out our other store items! Johnson's Country Store Serving Western New York since 1976... Serving the World since 1999!
More

Wheeler Engineering Lapping...

$13.99
MidwayUSA Wheeler Engineering Lapping Compound 320 Grit (Smoothing) 1 oz
+ $4.99 shipping
/wheeler-engineering/_iwB7HNjzSzQ4xfOpRByMA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
A high quality silicon carbide abrasive paste that is used for lapping the bore of a firearm, the bolt face, bolt lugs and a hundred other uses where a perfect final fit or a lapped smooth surface is needed. When lapping a bore, pressure will likely increase with grit impregnated bullets. Due to the likely increase of pressure, light loads are recommended. Five shot strings up to a maximum of twenty shots of each grit are recommended. Repeating the process using progressively finer grits will produce a significantly smoother bore. Searches for products like these typically include: Gunsmithing Supplies,Bore Lapping & Bore Conditioners
More

Wheeler Engineering...

$54.08
eBay Wheeler Engineering Professional Gunsmith File Set
Free Shipping
/wheeler-engineering/tzV3KDXu-b1qfAWWofaxfg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Wheeler Engineering Professional Gunsmith File Set Item Details SKU :   The Wheeler Engineering Professional Gunsmith File Set is useful for many different gunsmithing functions. The set comes with a wide grade of files from a rough rasp all the way down to a super extra fine diamond plate. Whether you are reshaping a wood stock or smoothing out an action, this set will prove to be advantageous. Included in this set is: an 8 half round file, an 8 flat file, a 6 square file, a 6 triangle file, a 6 round file, a 4-n-1 Rasp, a file cleaning brush, an extra fine diamond plate, a stick of file chalk, a small flat coarse grit diamond file, a small round coarse grit diamond file, a small triangle coarse grit diamond file, a small flat medium grit diamond file, a small round medium grit diamond... Less
More

Wheeler Engineering Roll Pin...

$25.03
eBay Wheeler Engineering Roll Pin Starter Punch Set Free Shipping
Free Shipping
/wheeler-engineering-roll/uNg4XZQK89RQP8Gm0N3nlA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Description New Wheeler Engineering Roll Pin Starter Punch Set by Wheeler Product Description The Wheeler engineering roll pin Starter punch set are machined from hardened steel to prevent bending or breaking while driving any size roll pin. The punches are designed with a beveled tip to provide proper alignment of the roll pin in the punch. The 9 piece set includes: 5/16, 1/4, 7/32, 3/16, 5/32, 1/8, 3/32, 5/64, 1/16 punches in a nylon pouch. Item Weight: 1 pounds Shipping Weight: 1.1 pounds Domestic Shipping: Item can be shipped within U.S. International Shipping: This item is not eligible for international shipping. Learn More Item model number: 710910 Product Features 9-Piece set 1/16 through 5/16 Hardened steel construction Beveled tip for Starting the roll pin Fitted Nylon storage... Less
More

Wheeler Engineering...

$55.59
eBay Wheeler Engineering Professional Gunsmithing File Set Free Shipping
Free Shipping
/wheeler-engineering/yfSeGsoNSjbiFFaeYeq8YQ==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Description New Wheeler Engineering Professional Gunsmithing File Set by Wheeler Product Description The Wheeler engineering professional gunsmith file set is perfect for many different Gunsmithing jobs. The set comes with a wide grade of files from a rough rasp all the way down to a super fine emery board. Whether your reshaping a wood stock or smoothing out an action, this set is perfect for you. Includes one each of the following: 8 half round file, 8 flat file, 6 square file, 6 Triangle file, 6 round file, 4-n-1 rasp , file cleaning brush, extra fine Diamond plate, stick of file chalk, small flat coarse grit Diamond file, small round coarse grit Diamond file, small Triangle coarse grit Diamond file, small flat medium grit Diamond file, small round medium grit Diamond file, small... Less
More

Wheeler-rex 60200 1/4 - 3/8...

$150.99
eBay Wheeler-rex 60200 1/4 - 3/8 Npt Threading Dies (fits 60120 Die Head)
+ $8.93 shipping
/wheelerrex-60200-14/1b3vLk9QU2ED6fgzHyW-KQ==/info
eBay
IN_STOCK ( In stock )
Wheeler-Rex 60200 1/4 - 3/8 NPT Threading Dies (fits 60120 Die Head) $150.99 ea. Wheeler-Rex 60200 1/4 - 3/8 NPT Threading Dies (fits 60120 Die Head) * Manufactured from TOOL STEEL * For 1/4 - 3/8 pipe * National Pipe Thread taper (NPT) * Designed to fit Wheeler Die Head #60120 * Dies come in sets of 4 (numbered 1-4) FastoolNow on eBay | 1-888-654-8898
More

Wheeler-rex 221067 4 Grooving...

$716.99
eBay Wheeler-rex 221067 4 Grooving Dies For Stainless Steel (fits 60123 Die Head)
+ $8.93 shipping
/wheelerrex-221067-4/iAuWHklWL3tsACxPaG7Dog==/info
eBay
IN_STOCK ( In stock )
Wheeler-Rex 221067 4 Grooving Dies for Stainless Steel (fits 60123 Die Head) $716.99 ea. Wheeler-Rex 221067 4 Grooving Dies for Stainless Steel (fits 60123 Die Head) * Manufactured from Stainless Steel * For 4 pipe * National Pipe Thread taper (NPT) * Designed to fit Wheeler Die Head #60123 * Dies come in sets of 4 (numbered 1-4) FastoolNow on eBay | 1-888-654-8898
More

Wheeler-rex 60210 1/4 - 3/8...

$127.99
eBay Wheeler-rex 60210 1/4 - 3/8 Npt Threading Dies For 60131 Die Head
+ $8.93 shipping
/wheelerrex-60210-14/z8X2qg_rnuTv-FIQb6deFQ==/info
eBay
IN_STOCK ( In stock )
Wheeler-Rex 60210 1/4 - 3/8 NPT Threading Dies for 60131 Die Head $127.99 ea. Wheeler-Rex 60210 1/4 - 3/8 NPT Threading Dies for 60131 Die Head * Manufactured from TOOL STEEL * For 1/4 - 3/8 pipe * National Pipe Thread taper (NPT) * Designed to fit Wheeler Die Head #60131 * Dies come in sets of 4 (numbered 1-4) FastoolNow on eBay | 1-888-654-8898
More

Wheeler-rex 60201 1/2 - 3/4...

$150.99
eBay Wheeler-rex 60201 1/2 - 3/4 Npt Threading Dies (fits 60120 Die Head)
+ $8.93 shipping
/wheelerrex-60201-12/1B40H4x2CFgCgo3Ij8bUpQ==/info
eBay
IN_STOCK ( In stock )
Wheeler-Rex 60201 1/2 - 3/4 NPT Threading Dies (fits 60120 Die Head) $150.99 ea. Wheeler-Rex 60201 1/2 - 3/4 NPT Threading Dies (fits 60120 Die Head) * Manufactured from TOOL STEEL * For 1/2 - 3/4 pipe * National Pipe Thread taper (NPT) * Designed to fit Wheeler Die Head #60120 * Dies come in sets of 4 (numbered 1-4) FastoolNow on eBay | 1-888-654-8898
More

Wheeler-rex 90752 Quick...

$192.99
eBay Wheeler-rex 90752 Quick Release Tubing Cutter 4- 6-5/8
+ $9.23 shipping
/wheelerrex-90752-quick/4BPqmZAzQqdFA5qDez6D8A==/info
eBay
IN_STOCK ( In stock )
Wheeler-Rex 90752 Quick Release Tubing Cutter 4- 6-5/8 $192.99 ea. Wheeler-Rex 90752 Quick Release Tubing Cutter 4- 6-5/8 Quick Release Tubing Cutter, Gives clean, square cuts on plastic and non-ferrous metal pipe. Spring loaded cutter wheel feeding system allows slide-action size adjustment and quick release. Specifications For 4 to 6-5/8 (100-168mm) O.D. Weight 4lbs Replacement Cutter Wheel for plastic 8075-standard Replacement Cutter Wheel for non-ferrous metals 8025-optional Replacement Cutter Wheel Pin Set 80718 Complete Burring Tool 80713 FastoolNow on eBay | 1-888-654-8898
More

Wheeler-rex 90750 Quick...

$104.99
eBay Wheeler-rex 90750 Quick Release Tubing Cutter 1/4- 2-5/8
+ $8.93 shipping
/wheelerrex-90750-quick/AlBdu8bEUDnWxSqycPN3Tw==/info
eBay
IN_STOCK ( In stock )
Wheeler-Rex 90750 Quick Release Tubing Cutter 1/4- 2-5/8 $104.99 ea. Wheeler-Rex 90750 Quick Release Tubing Cutter 1/4- 2-5/8 Quick Release Tubing Cutter, gives clean square cuts on copper, brass, aluminum tubing and thin walled conduit. Changing the cutter wheel allows plastic pipe to be cut. Tool includes two cutter wheels and swivel deburring tool which is stored conveniently in the body of the cutter. Specifications For 1/4 to 2-5/8 (6-67mm) O.D. Weight 2lbs Replacement Cutter Wheel 8071, 8073 Plastic Replacement Deburring Blade 80711 Complete Deburring Tool 80712 Replacement Cutter Wheel Pin Set 80715 FastoolNow on eBay | 1-888-654-8898
More

Wheeler-rex 5412 Orbital Pipe...

$11,760.00
eBay Wheeler-rex 5412 Orbital Pipe Cutter, 4-12 Cut & Grv Stl & Alum
Free Shipping
/wheelerrex-5412-orbital/CfqoJWXVLgquo8tQW3MARQ==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Wheeler-Rex 5412 Orbital Pipe Cutter, 4-12 Cut & Grv Stl & Alum $11759.99 ea. Wheeler-Rex 5412 OPC,4-12 CUT & GRV STL & ALUM For 4-12 (100-300mm) steel and ductile iron pipe. The clamshell frame and modular design make this machine fast and easy to set up and operate. A single frame and gear plate make the orbital the most economical unit for its size range. Standard 115V electric power. Complete with all necessary accessories and packed in a storage case. Specifications Cut & Groove, steel pipe 4- 12 (100-300mm) Shipping Weight: 362 lbs. (165kg) Accessories: 220267 Cut-Off Blade, DI 220808 RH Cut-Off Blade, steel 220809 LH Cut-Off Blade, steel 220705 30 degree Steel Bevel Blade 220706 37-1/2 degree Steel Bevel Blade 220770 45 degree Steel Bevel Blade 220707 45 degree DI Bevel Blade... Less
More

Wheeler-rex 60256 1/2 - 3/4...

$128.99
eBay Wheeler-rex 60256 1/2 - 3/4 Npsm Threading Dies (fits 60131 & 70131 Die Heads)
+ $8.93 shipping
/wheelerrex-60256-12/GdbbTysGA-i_WVc7PoHxJw==/info
eBay
IN_STOCK ( In stock )
Wheeler-Rex 60256 1/2 - 3/4 NPSM Threading Dies (fits 60131 & 70131 Die Heads) $128.99 ea. Wheeler-Rex 60256 1/2 - 3/4 NPSM Threading Dies (fits 60131 & 70131 Die Heads) * American National Standard Straight Pipe Thread for Free Fitting Mechanical Joints (NPSM) threading * For 1/2 - 3/4 pipe * Conduit Threading * Designed to fit Wheeler Die Head #60131 & 70131 * Dies come in sets of 4 (numbered 1-4) FastoolNow on eBay | 1-888-654-8898
More

Wheeler-rex 90722 Mini Tubing...

$18.99
eBay Wheeler-rex 90722 Mini Tubing Cutter 1/4- 7/8
+ $8.62 shipping
/wheelerrex-90722-mini/KClolR8YAQpH3RdI0B9rag==/info
eBay
IN_STOCK ( In stock )
Wheeler-Rex 90722 Mini Tubing Cutter 1/4- 7/8 $18.99 ea. Wheeler-Rex 90722 Mini Tubing Cutter 1/4- 7/8 Mini Tubing Cutter, for accurate cutting of copper, brass, aluminum and stainless steel tubing. Specifications For 1/4 to 7/8 (6-22mm) O.D. Weight 5 oz. FastoolNow on eBay | 1-888-654-8898
More

Wheeler-rex 275410 1/4 Dr X...

$13.99
eBay Wheeler-rex 275410 1/4 Dr X 5/16 Hex Socket
+ $8.62 shipping
/wheelerrex-275410-14-dr/KQVpAy02Eost-rfMY9LCfg==/info
eBay
IN_STOCK ( In stock )
Wheeler-Rex 275410 1/4 Dr x 5/16 Hex Socket $13.99 ea. Wheeler-Rex 275410 1/4 DR X 5/16 HEX SOCKET 5/16 Replacement Socket to 1977, 1980, 1981, 1982 T-Torque Soil Pipe Coupling Torque Wrenches FastoolNow on eBay | 1-888-654-8898
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2018 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-r.2017.sprint17-EP-4612-30501
http://img.shoppingshadow.com/jfe/JavaFrontEnd-r.2017.sprint17-EP-4612-30501