4 Port UTP Video Extender/Splitter allows up to 5 (1 local and 4 remote) monitors to be connected to a single PC. The video signal is sent to remote monitors over standard 4 pair Category 5 UTP cable using RJ45 connectors and supports distances of up to 980 Ft. At each remote monitor an STUTPRXL receiver (each sold separately) is required to convert the signal from the UTP cable back into VGA video for the monitor. Typical applications are: airports bus depots factories or any large buildings where video needs to be delivered at long distances. Type: Video Splitter. Form Factor: External. Interfaces: 1 x display / video - VGA output - 15 pin HD D-Sub (HD-15). 4 x display / video - RJ-45.

Manage your power more efficiently with the Cables To Go 1-to-4 Power Cord Splitter. This splitter features one male 3-prong plug which splits to four female 3-prong plugs. Simply plug the power cord splitter s male prong into an outlet and you re ready to power multiple electronic devices. Saves space by eliminating extra cords and it keeps your surge strips and UPS outlets free. This cord is ideal in a compact workplace or home office where there is a need to run electronic equipment in a limited space. This power cord splitter can be use with Power Transformers Computers Monitors Scanners Printers and other devices that use a 3-pin male-to-female shroud power connector.

The Gefen 1:4 Splitter for HDMI 1.3 allows set-top boxes DVD players and other HDTV devices to be connected to four or more HDTV displays. When two or more Splitters are connected together they can be used to create a larger video signal distribution. This new unit supports HDMI 1.3 features and passes the higher bandwidth HDMI 1.3 signal for the ultimate in state-of-the-art HDMI signal duplication. Connects up to four HDMI / DVI displays at the same time to one video source. Maintains high resolution video - beautiful sharp HDTV resolutions up to 1080p 2k and computer resolutions up to 1920 x 1200 are easily achieved. HDMI and HDCP compliant. Video Amplifier Bandwidth: 225 MHz. Input Video Signal: 1.2 volts p-p. Input DDC Signal: 5 volts p-p (TTL). HDMI Connector: type A 19 pin female... Less

F-Pin (Coax) Splitter, 8-Way (30X4-03208)NEW This splitter is great for splitting cable signals to go to multiple TVs or just for expanding a signal for current or future use. 5-900MHz 75 MATV low-cost F splitter Suitable for consumer MATV applications Epoxy-sealed back-cover Mounting tabs with screws Cast-in ground block

Out of power connectors? Our Quad Splitter is the answer. Easily attach additional hard drives CD-roms CD-RWs and more to your computer s power supply. These cables are UL listed and meet or exceed set industry standards. Don t trust just any cable to power your devices. Connector: One 4-pin Male Socket to Four 4-pin Jacket Females. Splits one 5-1/4 power connector into four 5-1/4 power connectors. 1x Molex Male to 4x Molex Female.

Manage your power more efficiently with the Cables To Go 1-to-4 Power Cord Splitters. This splitter features one male 3-prong plug which splits to four female 3-prong plugs. Simply plug the power cord splitters male prong into an outlet and youare ready to power multiple electronic devices. Saves space by eliminating extra cords and it keeps your surge strips and UPS outlets free. This cord is ideal in a compact workplace or home office where there is a need to run electronic equipment in a limited space. FeaturesCable Type: Heavy-Duty 18AWGConnectors: One male 3-prong Grounded Plug NEMA 5-15-P to four female 3-Prong Grounded Plugs NEMA 5-15-R Design: Female connector plugs directly into device power cables and male connector plugs into standard outletsCompatibil ity: Power Transformers... Less

Replace your overused or misplaced power cable or just manage your power more efficiently. This handy cable features a male 3-prong plug which splits to two female 3-prong shrouds. Simply plug the power cord s male prong into a standard outlet and you re ready to power multiple electronic devices. Saves space by eliminating extra cords and keeps your surge strip and UPS outlets from being blocked by bulky AC transformers. Ideal for use in compact workplaces or home offices where there is limited space for electronic equipment. Plus this heavy-duty 16 AWG cord features a fully molded design for maximum durability and long life. Compatible for power transformers computers monitors scanners printers and other devices that use a 3-pin male to female shroud power connector.

For sale Molex on Molex Hard Drive Splitter Cable SAS 26 Pin to 4x SATA 7 Pin Please note that we are selling factory direct products. All our products are 100% brand new in manufacturer's packaging. Description:SAS 26 Pin to 4x SATA Cable can connect a SAS Controller to 4 x SATA Hard Drives.Mini 26 pin port to 4 x 7 pin internal serial attached cable for connecting SAS controller to individual SAS/SATA hard drives.Thin and flexible cabling allows easy routing.SAS 26 Pin to 4x SATA 7 Pin Cable

The PYO2L LP4 to 2x LP4 Power Y Splitter Cable features one LP4 male connector that breaks out into two LP4 female connectors providing a cost-effective solution for connecting two LP4 peripheral devices (CD/DVD-ROM drives IDE hard drives etc.) to a single LP4 connector provided by the computer power supply. LP4 to dual LP4. Compatible with all IDE hard drives. Connector A 1 - LP4 (4 pin; Molex Large Drive Power) Male. Connector B 2 - LP4 (4 pin; Molex Large Drive Power) Female. Length: 9.06 in.

The Stellar Labs NL4-SPLIT is designed to allow the use of multiple speaker cabinets on a single amplifier channel. The splitter is wired internally (13AWG wiring) with all four pins connected in parallel. The adaptor box utilizes genuine Neutrik® Speakon® NL4 connectors to ensure the highest reliability. Note: Care should be taken to observe the minimum impedance at which the amplifier can operate - wiring two 8? speakers in parallel will present a 4? load to the amplifier

The Champion 22 Ton Gas Powered Log splitter provides heavy duty, dependable, and portable log splitting with power and speed. 22 Ton performance with 23-inch x 4-inch Hydraulic Cylinder, 2 Stage Hydraulic 11 Gallon/minute Pump producing Maximum pressure of 3500 psi. 14 second no load cycle time and integrated log cradle can accommodate 24-inch long logs with maximum weight of 100-pounds Towable frame with 2-inch ball hitch, DOT approved wheels includes 5 Gallon Hydraulic oil reservoir (oil not included) and spin on oil filter (included). Operates either vertically or horizontally, adjust using pull pin. Powered by Champion 196 OHV engine with cast iron sleeve with 1 Gallon gas tank and low oil shutdown. EPA approved (not for sale in California). Ships crated and unassembled. ... Less

F-Pin (Coax) Splitter, 4 way, 2 GHz 90dB, 1-DC Passing (201-234)NEW This splitter will work great for regular cable, digital cable and satellite systems. With this splitter being capable of frequencies up to 2GHz, there's no need to worry about signal loss or degradation of runs up to 100 ft.

Aten s VS0404 Video Matrix Switch integrates a video switch video splitter and a speaker together. When the regular video splitter can only distribute a single video signal to multi-monitors and the regular video switch just shows a single video signal at one time VS0404 allows video and audio signals from 4 separate computers to be routed to 4 monitors projectors and speakers independently. The VS0404 is also a signal booster. It allows you to extend the signal transfer distance up about 210 feet with excellent video quality. To provide more outputs VS0404 can be cascaded with regular video splitters for various applications. VS0404 is ideal for presentations and applications where information from multiple computers is being delivered to multiple destinations. Video matrix switch... Less

Y Cable Splitter 1 ATX P4 to 2 ATX P4 Connector 10" MADE IN USA Lot of 5 Brand New Y Cable Splitter 1 ATX P4 to 2 ATX P4 Connector 10" Part Number:Y04-10" If you have a server board that requires a 2 ATX 4-pin connector, you don't have to buy a new expensive power supply with 2 ATX 4-pin power connectors. You can just use this adapter cable to make your existing standard 1 ATX P4 connector work as 2 ATX P4 connectors if your power supply is 400w or more. Cable length is 10" This is used to convert 1 ATX P4 connector into 2 ATX P4 connectors,

Break the limits of SVGA with a Port Authority2 VSE from Cables To Go. Simultaneously distribute any video signal to up to 8 different video outputs while maintaining vivid picture quality. The VSE is powerful yet easy to use. Connect the cables and you're ready to go! There is no software or plicated interface cards to install. The VSE not only distributes but also boosts your high-resolution video signal up to 210 feet. Available with two four and eight ports the VSE is perfect for classrooms exhibits trade shows monitor testing demonstrations and multi-media presentations. The VSE is also ideal for broadcasting video information such as news headlines stock prices airline flights and train schedules. Primary InformationNetwor king Type :  Video splitter Form Factor :  Externa... Less

NEW with FULL WARRANTY 4-channel Microphone Input Splitter The Pro Co MS-42A is a 4-channel 1 > 2 mic splitter. The female 3-pin XLR-type connector accepts signal from low-impedance (150 ohm nominal) microphone or similar source. A male 3-pin XLR-type connector is wired in parallel with MIC IN and provides signal to feed mixer input. A male 3-pin XLR-type connector provides floating transformer- isolated low-impedance output to feed mixer input. All connectors are on the front. A ground lift reduces hum and buzz by eliminating ground loops and providing proper grounding for various conditions. Pro Co MS-42A Mic Splitter Features: Provides 2-way split for low-Z microphones Four splitter channels in single rack space Allows assembly of economical expandable splitting system Great for... Less

The FAN4SPLIT12 Fan Power Splitter Cable enables you to connect two 4-pin (PWM) fans to a single power supply connector, which allows you to optimize your computer cooling capability without having to upgrade the power supply. Providing a flexible way to position computer case fans as needed, this 4-pin Fan Power Splitter cable offers a connection length of 1ft, eliminating the need to strain the connection from the computer power supply in order to reach the fan power connection. This high quality splitter cable is constructed of high quality materials to ensure long-lasting performance, and is backed by StarTech.com's Lifetime Warranty. 1ft - Molex - Molex Connector On First End - 1 x 4-pin Molex Female Connector On Second End - 2 x 4-pin Molex Male Green Compliant - Yes Green... Less

HOME SHIPPING SIGN UP CONTACT US VISIT OUR STORE Camera Cell phone Fashion Gadgets Games Home ACC MP3 Music PC Sports Product Description SAS 26 Pin to 4x SATA 7 Pin Hard Drive Splitter Cable Please note that we are selling factory direct products. All our products are 100% brand new in manufacturer's packaging. Description:SAS 26 Pin to 4x SATA Cable can connect a SAS Controller to 4 x SATA Hard Drives.Mini 26 pin port to 4 x 7 pin internal serial attached calbe is idea for connecting SAS cont

New Professional Studio Series Noise Free Cables by GLS Audio. They have a 6mm thick, high quality, flexible rubber jacket (not that cheap stiff plastic jacket like others sell). They are heavy duty Noise Free "True Balanced LO-Z" and have 3 pin XLR connectors on each end. These cables have dual insulated copper conductors plus they are shielded. They are hand wired & hand soldered and have high quality metal ends. The XLR's have the famous GLS Audio internal Tri-GripTM strain relief and external rubber booty. You'll notice the newly developed GLS Audio Y-Grip technology. This special injection molded piece was designed to allow 6mm cable to be joined in a Y connection. Normal Y-Cables can't use thick 6mm cable because the connectors can't accept (2) 6mm cables. Typical Y-Cables use 2mm,... Less

This splitter will work great for regular cable, digital cable and satellite systems. With this splitter being capable of frequencies up to 2GHz, there's no need to worry about signal loss or degradation of runs up to 100 ft.

This 8 Port VGA over Cat5 video extender/splitter allows up to 8 (1 local and 8 remote) monitors to be connected to a single PC. The video signal is sent to remote monitors over standard 4 pair Category 5 UTP cable at distances of up to 300m (950ft) away from the signal source. At each remote monitor an STUTPRXL receiver or STUTPRXWAL wall plate receiver(see accessories) is required. The receivers convert the signal from the UTP cable back into VGA video for the monitor. Monitor receivers are sold separately (See STUTPRXL). Monitors can be up to 300m / 950ft away. Simultaneously displays the same image on 8 monitors. Supports a maximum resolution of 1280 x 1024 60 Hz refresh rate. Cascadable up to three levels. AV Cabling Cat 5: UTP. Color: Black. Connector Types: 1 - High Density 15 pin... Less

Cisco High Density RS-232 Splitter Cable, CAB-HD4-232MT Network Cable Type- Serial RS-232 cable Length- 10 ft  Connector(s)- (1) 68 pin SCSI - male Connector(s) (Other Side)-(4) DB-25 - male Condition: New

Specification: HDMI Matrix routes high definition video in multiple resolutions up to 1080p plus multi channel digital audio from any of the four HDMI sources to two displays. Two outputs give you the choices of sending high definition audio and video signals up to two displays. Any four to any two matrix switching allows for maximum versatility for integrated systems. The 4x2 HDMI Switcher eliminates the need to disconnect and reconnect sources to a display equipped with one input. It works with HD-DVD players, Blue Ray DVD, PS3, and satellite set top boxes that connect to two HDMI displays. Every source is accessible at all times by any display by selecting it with an IR remote. Features The series of the HDMI Amplifier Splitter have... Less

Automatic EDID learning fo the support of any DVI monitor. The function to display identical images on more monitors, is an attachment of another splitter. Connect the DVI male/female extension cable between the former splitter of the "DVI out 1" port and the latter splitter of the "video in" port for cascading. Specification Interfaces/Ports Interfaces/Ports 1 x 29-pin DVI-I Female Video In 4 x 29-pin DVI-I Female Video Out General Information Product Type VGA Splitter Product Name DVS4P 1x4 DVI Video Splitter Manufacturer Part Number DVS4PS Manufacturer Smart Audio Video Innovation The function to display identical images on more monitors, is an attachment of another splitter. Connect the DVI male/female extension cable between the former splitter of the "DVI out 1" port and the latter... Less

HDMI Splitter Powered 1x4With the HDMI distribution Amplifier you can display identical image on four(4) displays from one(1) source equipment with HDMI port.This splitter is smaller in size and more beautiful in appearance. It distributes the input of the HDMI signal into the four identical outputs simultaneously. It supports HDCP and the real HDMI 1.3b. Its video amplifier bandwidth can be up to 2.25 Gpbs/225MHz. The HDMI Splitter offers solutions for HDTV retail and show site HDTV STB DVD and Projector factory noise space and security concerns data center control information distribution conference room presentation school and corporate training environments. . Connect One HDMI sources to up to four HDTV display devices. Maintains 480i 480p 720p 1080i and 1080p resolutions. Maintains... Less

KDM POWER, has been in manufacturing and distribution business over 15 years. We are in Houston, Texas USA and mainly focused on designing Power Supplies, Power Converters, AC Adapters, Industrial Supplies, Rackmount, Mobile Rack, Enclosure, Backplane and ODM/OEM requirements from our valued customers worldwide. . We offer extensive customer care policies on Satisfaction Guaranteed and Same Day Shipping Service in USA. You can definitely count on us with your purchase at all times. Summary: KDM

$$ SAVE $$ We will combine with other items to save you shipping. $$ SAVE $$ Lot of 10.Picture shows 1, you get 10 Condition: NEW Packaging:Bulk SVHS 4pin mini din Male to Dual BNC Female (Y C) (aka S-Video or Super VHS) The is a Y/C Cable that give better performance the yellow RCA jacks does. PLEASE SAVE our STORE as a Favorite. We are building up to our full product line of over 2,000 parts. Local pick up available Powered by eBay Turbo Lister

Balanced XLR splitter cables are ideal for connecting one XLR signal to two sources or inputs. They can be used for connecting two inputs of an amplifer from one (mono) signal or spliiting your signal to go to two seperate mixers.

HOME SHIPPING SIGN UP CONTACT US VISIT OUR STORE Camera Cell phone Fashion Gadgets Games Home ACC MP3 Music PC Sports Product Description RJ11 4 Pins Female 1 to 2 Telephone Splitter Connector Adapter Please note that we are selling factory direct products. All our products are 100% brand new in manufacturer's packaging. Specification: Product Name RJ11 Telephone Connector Typw RJ11 Female 1 to 2 Connector Color Beige Material Plastic Total Size 3.4 x 2.6 x 2cm/ 1.3 x 1 x 0.8 (L*W*T) Weight 8g P

Tripp Lite s B132-004-1 allows you to split a single VGA signal into 5 (1 local 4 remote). Increase the number of displays to up to 25 (1 local 24 remote) by daisychaining up to six B132-004-1 units together. When used with a B132-100-1 or B132-100-WP-1 remote unit you can extend a 1024 x 768 (60Hz) video signal up to 1 000 from the source using 24Awg Solid Wire Cat5e/6 cable. For optimal video image quality between 500 and 1 000 use Zero-Skew cable such as Tripp Lite P524-01K. Includes mounting hardware that allows unit to be wallmounted rackmounted or pole mounted. Up to three B132-004-1 units can be mounted in 1U of rack space using a Tripp Lite B132-004-RB Extender/Splitter 19 in. rackmount bracket. Ideal for digital signage situations such as retail schools churches. Graphics... Less