This USB A to USB Motherboard 4-Pin Header plugs directly into a motherboard USB header providing two standard USB A female ports. A cost-effective solution for any application requiring internal USB 2.0 female ports including using a bootable USB flash drive as a SSD or collecting data in embedded applications. Primary InformationCable Type :  USB Motherboard Header Adapter Dimension s&MiscellaneousLe ngth :  OTH Conne ctionLeft Connector Gender :  Female  Right Connector Gender :  Female  Left Connector Type :  10 pin IDC Right Connector Type :  4 pin USB Type A Service&Support Service & Support Type :  Lifetime warranty Special FeatureRoHS :  Y  UNSPSC CodeUNSPSC Code :  43201404 

4 USB 2.0 Ports and a 4-Pin Header PCI-e Card. Ports: 4 External USB 2.0 (USB Type A Female) 1 Internal 4-Pin Header (Shared Port). Moschip MCS9990 Chipset. Plug-N-Play. Maximum Data Transfer Rate: 2.5Gbps. Fully Plug & Play and Hot Plug Supported. Complies with USB Specification Revision 2.0. Complies with Open Host Controller Interface (OHCI) Specification for USB Rev 1.0a. Complies with Enhanced Host Controller Interface (EHCI) Specification for USB Rev 1.0. Supports USB High Speed (480Mbps) Full Speed (12Mbps) and Low Speed (1.5Mbps). Built-in Power Connector for USB Bus Power (Some of the USB Devices Might Need Extra Power from the USB Ports). Built-in Power Connector for USB Bus Power (For Those USB Devices Might Need a Little More Power From the USB Ports). Carton QTY: 50. Software... Less

SYBA 4X USB 2.0 Ports & a 4-Pin Header PCI-e Card NEW New SYBA PCI-e to 4-port USB 2.0 Controller Card w/ USB Bus Power Connector [OEM] SD-PEX20052 Quantity: 1 Expand your computers connectivity with this 4-port PCI-e card with USB Bus power connector Ports: 4 External USB 2.0 (USB Type A Female), 1 Internal 4-Pin Header (Shared Port) Moschip MCS9990 Chipset Plug-N-Play Maximum Data Transfer Rate: 2.5Gbps Fully Plug & Play and Hot Plug Supported Complies with USB Specification Revision 2.0 Complies with Open Host Controller Interface (OHCI) Specification for USB Rev 1.0a Complies with Enhanced Host Controller Interface (EHCI) Specification for USB Rev 1.0 Supports USB High Speed (480Mbps), Full Speed (12Mbps) and Low Speed (1.5Mbps) Built-in Power Connector for USB Bus Power (Some of the... Less

New SYBA USB 2.0 4-port PCI-e Card with USB Bus Power Connector [OEM] SD-PEX20052 SYBA USB 2.0 4-port PCI-e Card with USB Bus Power Connector [OEM] SD-PEX20052 Expand your computers connectivity with this 4-port PCI-e card with USB Bus power connector Ports: 4 External USB 2.0 (USB Type A Female), 1 Internal 4-Pin Header (Shared Port) Moschip MCS9990 Chipset Plug-N-Play Maximum Data Transfer Rate: 2.5Gbps Fully Plug & Play and Hot Plug Supported Complies with USB Specification Revision 2.0 Complies with Open Host Controller Interface (OHCI) Specification for USB Rev 1.0a Complies with Enhanced Host Controller Interface (EHCI) Specification for USB Rev 1.0 Supports USB High Speed (480Mbps), Full Speed (12Mbps) and Low Speed (1.5Mbps) Built-in Power Connector for USB Bus Power (Some of the... Less

The Lexmark Forms Printer 2590 combines speed and quality for all your narrow-width forms and documents from invoices to office memos. Print 4-part forms (1 original + 3 copies) with up to 360 x 360 dpi resolution. Also available as a network-ready model: Lexmark Forms Printer 2590n. PrinterPrinter Technology :  Dot -matrix Printer Interface :  USB; Parallel; Ethernet 10/100Base- TX Printer Speed :  up to 465 cps Printer Output :  Monochr ome Printer / Max Resolution ( B&W ) :  360 x 360 dpi Printer Language Simulation :  Eps on Emulation; Personal Printer Data Stream RAM Installed Size :  512 MB MediaDimension s&MiscellaneousWi dth :  19.4 Inch Depth :  11. 4 Inch Height :  7. 7 Inch Header / Model :  2590n 24 -pin dot matrix narrow format; Network- ready System RequirementsPower /... Less

SNAP D-series racks are designed for discrete control applications and can accommodate 4, 6, 8, or 12 SNAP 4-channel digital modules. These racks use an industry- standard 50-pin header connector, which allows these racks to be used in a variety of applications. The logic side of the I/O circuitry can be controlled directly or by using an Opto 22 PCI-AC5 (PCI bus) or G4AC5 or AC5 (ISA bus) PC adapter card. In addition, the 4-module-position SNAP-D4M can be used with Opto 22s Classic brain boards. These boards use one of Opto 22s industry- standard protocols (mistic, Optomux, or Pamux) to control the I/O and communicate either serially or in parallel. Field devices are wired directly to the top-mounted removable connectors on the SNAP I/O modules. The module and rack design allows modules... Less

Using powerful NEC 2.0 host controller chip. Required 4-pin molex from power supply as power source. 1x internal 4-pin header sharing with the USB port on the top. Complies with PCI-Express Base Specifications Revision 1.1 with data transfer rate up to 2.5Gbps. Complies with Universal Serial Bus Specification Revision 2.0. Complies with Open Host Controller Interface Specification for USB Revision 1.0a. Complies with Enhanced Host Controller Interface Specification for USB Revision 1.0. All downstream ports can handle High-Speed (480Mbps) Full-Speed (12Mbps) and Low-Speed (1.5Mbps) transaction. Fully Plug & Play supported. Full support of real time dynamic insertion and removal of devices. Supports all USB-compliant peripherals (e.g. keyboard mouse monitor telephone joystick etc). Support... Less

SNAP D-series racks are designed for discrete control applications and can accommodate 4, 6, 8, or 12 SNAP 4-channel digital modules. These racks use an industry- standard 50-pin header connector, which allows these racks to be used in a variety of applications. The logic side of the I/O circuitry can be controlled directly or by using an Opto 22 PCI-AC5 (PCI bus) or G4AC5 or AC5 (ISA bus) PC adapter card. In addition, the 4-module-position SNAP-D4M can be used with Opto 22s Classic brain boards. These boards use one of Opto 22s industry- standard protocols (mistic, Optomux, or Pamux) to control the I/O and communicate either serially or in parallel. Field devices are wired directly to the top-mounted removable connectors on the SNAP I/O modules. The module and rack design allows modules... Less

This Multi-I/O panel can be installed inside a 3.5 or 5.25 Bay. External Connectors:. 4 USB 3.0 Ports. 1 IEEE 1394A Firewire 4-pin Port. 1 IEEE 1394A Firewire 6-pin Port (Shared Port with 4-pin). 1 eSATA. Internal Connectors:. USB 3.0 Type-B Port. Firewire Header. SATA Port. Package Includes:. USB 3.0 + Firewire + eSATA Multi-I/O Front Panel. Universal 3.5 to 5.25 Mounting Frame (Black Plastic). USB 3.0 Cable (Type-A to Type-B 37 ). Firewire 10-pin Header Cable (21 ). SATA Cable (18 ). Molex Power Cable (8 ). Screws. Back Panel Bracket. User Manual. Software Requirement:. Windows 7 32/64 bit. Vista 32/64 bit. Windows XP 32/64 bit. Server 2003. Server 2008. Hardware Requirement:. Computer with USB 3.0 Port. Computer with Firewire 10-pin Header. Computer with SATA Port. Computer with ATX... Less

SNAP D-series racks are designed for discrete control applications and can accommodate 4, 6, 8, or 12 SNAP 4-channel digital modules. These racks use an industry- standard 50-pin header connector, which allows these racks to be used in a variety of applications. The logic side of the I/O circuitry can be controlled directly or by using an Opto 22 PCI-AC5 (PCI bus) or G4AC5 or AC5 (ISA bus) PC adapter card. In addition, the 4-module-position SNAP-D4M can be used with Opto 22s Classic brain boards. These boards use one of Opto 22s industry- standard protocols (mistic, Optomux, or Pamux) to control the I/O and communicate either serially or in parallel. Field devices are wired directly to the top-mounted removable connectors on the SNAP I/O modules. The module and rack design allows modules... Less

This PCI-based High Speed USB 2.0 Adapter Card adds seven USB 2.0 ports (1 internal USB A Female 2 internal USB motherboard header and 4 external USB A Female) to your PCI-capable PC. The PCI USB 2.0 card is a versatile solution that lets you add USB 2.0 connections without having to upgrade the system motherboard. Type: USB Adapter. Host Interface: PCI. Data Transfer Rate: 480Mbps USB 2.0 High Speed. Ports: 4 x 4-pin Type A Female USB 2.0 - USB External 3 x 4-pin Type A Female USB 2.0 - USB Internal. Form Factor: Plug-in Card Hot-swappable. Dimensions: 0.79 x 4.72 x 4.8 .

Trying to decide between a whiteboard and a tackboard? Get both with Ghent's Combination Boards. This all-in-one board features a 3' x 8' magnetic whiteboard with a 1' x 8' header tackboard and a 4' x 2' side tackboard. The durable porcelain-on-steel whiteboard is so durable it resists scratching, staining and ghosting, and the tackboards are textured to conceal pin holes. This unit has a modular design for easy installation and affordable renovation. Each piece is framed in stylish aluminum. Enjoy greener, safer and more reliable shipping with Ghent's Smart-Pak packaging. The innovative packaging system includes a recessed marker tray. Ghent's 4' x 10' Whiteboard with Header and Side Tackboards is the ideal choice for your classroom, tutoring lab or training center. Key Features ... Less

SNAP D-series racks are designed for discrete control applications and can accommodate 4, 6, 8, or 12 SNAP 4-channel digital modules. These racks use an industry- standard 50-pin header connector, which allows these racks to be used in a variety of applications. The logic side of the I/O circuitry can be controlled directly or by using an Opto 22 PCI-AC5 (PCI bus) or G4AC5 or AC5 (ISA bus) PC adapter card. In addition, the 4-module-position SNAP-D4M can be used with Opto 22s Classic brain boards. These boards use one of Opto 22s industry- standard protocols (mistic, Optomux, or Pamux) to control the I/O and communicate either serially or in parallel. Field devices are wired directly to the top-mounted removable connectors on the SNAP I/O modules. The module and rack design allows modules... Less

Based on the Intel H61 chipset designed for scalability and cost optimization platforms the BIOSTAR TH61 ITX supports the 2nd-generation Intel core processors. It also supports dual channel DDR 3 1333/1066 to get amazing transfer rates. Enjoy the super speed of USB 3.0 x 4 two at the rear and two via a USB 3.0 header. On top of that the 100% solid caps make your motherboard durable and stable while the 7.1-channel Blu-ray audio CODEC provides high quality audio output of 24 bit/ 192KHz for an immersive sound experience. The BIO-remote 2 makes your Android mobile or Apple goods function as a fantastic remote controller. For HTPC setups along with performance and reliability the BIOSTAR TH61 ITX is a good choice. CPU Socket Type: LGA 1155. CPU Type: Core i7 / i5 / i3 / Pentium (LGA1155)... Less

Specifications. Mfr Part Number: X8ST3-F-O. CPU: Socket 1366 Support Intel Core i7-965 Extreme Edition/ Core i7 series/ Xeon 5500 series/ Xeon 3500 series Processor; QPI upto 6.4 GT/s. Chipset: Intel X58 & ICH10R. Memory: 6x 240pin DDR3- 1333/1066/800 DIMMs Triple Channel ECC/Non-ECC Unbuffered Upto 24GB. Slots: 3x PCI-Express 2.0 x8 Slot (Run on x16); 1x PCI-Express x4 Slot (Run on x8); 2x 32-bit PCI Slots. SATA: 6x SATA2 Ports Support RAID 0 1 5 10; 8x SAS/SATA Ports Support RAID 0 1 10 (Optional) 5. Video: Matrox G200eW Graphic Controller with 8MB DDR2 Memory. LAN: 2x Intel 82574L Gigabit Ethernet Controller; 1x Realtek RTL8201N PHY (dedicated IPMI). Ports: 8x USB 2.0 Ports (2 by rear 4 by headers 2 on-board); 2x PS/2 Ports; 2x Serial Ports (1 rear 1 by header); 1x VGA Port; 2x RJ45... Less

Lot of (10) Molex Connector Corporation, WM18073-ND, 87332-0420 Connector Header, 4 Position, Milli-Grid 87332. Part Number: WM18073-ND, WM18073ND, 87332-0420, 873320420 (Other Part Numbers On Bottom of Page) Information: Type: Connector Header Male Pins Series: Milli-Grid 87332 Type: Shrouded Header Contact Type: Male Pin Positions: 4 Rows: 2 Mounting Type: Surface Mount Termination: Solder Other: Board Guide Feature 0873320420-P 873-32-0420-P 87332-0420-P 87332-0420-TB79 87332-0420-TB80

2 Port USB 2.0 to 10-Pin Motherboard Header Internal Adapter Product Overview: This USB A to USB Motherboard 4-Pin Header plugs directly into a motherboard USB header, providing two standard USB A female ports. A cost-effective solution for any application requiring internal USB 2.0 female ports, including using a bootable USB flash drive as a SSD or collecting data in embedded applications. Specifications: Connector A: - 1 - IDC (10 pin; Motherboard Header) Female Connector B: - 2 - USB A (4 p

With easy plug-and-play installation our internal USB hub can be easily mounted into any available 3.5 inch drive bay. Add four USB ports to the front of your computer for hassle-free access to your USB peripherals including mice keyboards CD-R/RW s hard drives webcams flash card readers and other USB-enabled devices. With USB 2.0 this hub can transfer data at 480 Mbps 40 times faster than previous USB 1.1 adapters and 20% faster than FireWire 400. Supports per port overcurrent detection and protection. Cascade multiple hubs to accommodate up to 127 devices! Upstream: 4-pin Header PortDownstream: Four USB Type A FemalePlease Note: The hub supports USB 2.0 USB 1.1 and USB 1.0 peripheral devices as all ports can handle high-speed (480 Mbps) full-speed (12 Mbps) and low-speed (1.5 Mbps).

Trying to decide between a whiteboard and a tackboard? Get both with Ghent's Combination Boards. This all-in-one board features a 3' x 6' magnetic whiteboard with a 1' x 6' header tackboard and a 4' x 2' side tackboard. The durable porcelain-on-steel whiteboard is so durable it resists scratching, staining and ghosting, and the tackboards are textured to conceal pin holes. This unit has a modular design for easy installation and affordable renovation. Each piece is framed in stylish aluminum. Enjoy greener, safer and more reliable shipping with Ghent's Smart-Pak packaging. The innovative packaging system includes a recessed marker tray. Ghent's 4' x 8' Whiteboard with Header and Side Tackboards is the ideal choice for your classroom, tutoring lab or training center. Key Features ... Less

Expand your computers connectivity with this 4-port PCI-e card with USB Bus power connector Ports: 4 External USB 2.0 (USB Type A Female), 1 Internal 4-Pin Header (Shared Port) Moschip MCS9990 Chipset Plug-N-Play Maximum Data Transfer Rate: 2.5Gbps Fully Plug & Play and Hot Plug Supported Complies with USB Specification Revision 2.0 Complies with Open Host Controller Interface (OHCI) Specification for USB Rev 1.0a Complies with Enhanced Host Controller Interface (EHCI) Specification for USB Rev 1.0 Supports USB High Speed (480Mbps), Full Speed (12Mbps) and Low Speed (1.5Mbps) Built-in Power Connector for USB Bus Power (Some of the USB Devices Might Need Extra Power from the USB Ports) Built-in Power Connector for USB Bus Power (For Those USB Devices Might Need a Little More Power From the... Less

Projectors Cameras StarTech.com 2 Port USB Motherboard Header Adapter Mfg. Part: USBMBADAPT2 SKU: S6696207 USB adapter - 4 pin USB Type A (F) - 4 pin MPC (F) Overview This USB A to USB Motherboard 4-Pin Header plugs directly into a motherboard USB header, providing two standard USB A female ports. A cost-effective solution for any application requiring internal USB 2.0 female ports, including using a bootable USB flash drive as a SSD or collecting data in embedded applications. Technical Specs Type USB adapter Connector(s) 2 x 4 pin USB Type A - female Connector(s) (Other Side) 1 x 4 pin MPC - female

With easy plug-and-play installation our internal USB hub can be easily mounted into any available 3.5 inch drive bay. Add four USB ports to the front of your computer for hassle-free access to your USB peripherals including mice keyboards CD-R/RW s hard drives webcams flash card readers and other USB-enabled devices. With USB 2.0 this hub can transfer data at 480 Mbps 40 times faster than previous USB 1.1 adapters and 20% faster than FireWire 400. Supports per port overcurrent detection and protection. Cascade multiple hubs to accommodate up to 127 devices! Upstream: 4-pin Header PortDownstream: Four USB Type A FemalePlease Note: The hub supports USB 2.0 USB 1.1 and USB 1.0 peripheral devices as all ports can handle high-speed (480 Mbps) full-speed (12 Mbps) and low-speed (1.5 Mbps).

Highlight your important messages and awards in Ghent's Indoor Enclosed Bulletin Board with Header. Each enclosed board comes with a customized header panel with matching frame and 6" high white acrylic surface. The header is available with or without a UL-listed fluorescent bulb. A self-healing, natural cork board hides pin holes and withstands years of tacking. Guests can view your documents through the shatter-proof acrylic front, while the three locking doors and aluminum frame keep vandals out. The full-length piano hinge is durable and won't pinch fingers. This Ghent Indoor Enclosed Cork Bulletin Board with Header has three 20"W x 44"H viewing areas and comes backed by a 10-year warranty. Made in the USA. Key Features Customized header Standard lettering on header... Less

Chipset: VIA P4M900 / VT8237A; MAIN: CPU SUPPORT: Intel Pentium 4 Processor; Intel Celeron D Processor; FSB: Support FSB 533/800MHz; MEMORY: Support DDR2 533/667 MHz; 2 x DDR2 DIMM Memory Slot; Max. Supports up to 4GB Memory;’ EXPANSION SLON; 2 x PCI Slots ; 1 x PCI-E x1 Slot ; 1 x PCI-E x16 Slot ; STORAGE: 2 x SATA Connectors ; 2 x IDE Connector ; Support SATA RAID: 0,1; USB: 4 x USB 2.0 Port ; 2 x USB 2.0 Header ; LAN: Realtek RTL8201CL - 10/100 PHY; INTEGRATED VIDEO: VIA Chrome9 HC IGP, On Board Graphic Max. Memory Share Up to 256MB; CODEC: Realtek ALC861VD 6-Channel HD Audio; REAR I/O: 1 x PS/2 Mouse; 1 x PS/2 Keyboard; 4 x USB 2.0 Port ; 1 x COM Port ; 1 x VGA Port ; 1 x RJ-45 Port ; 3 x Audio Connector : INTERNAL I/O: 1 x Printer Header; 2 x USB 2.0 Header ; 2 x SATA Connector ;... Less

Realtek ALC262 ASPEED AST2050 iBMC IPMI v2.0 compliant with iKVM support Dual Intel 5520 IOHs Intel ICH10R South Bridge LSI SAS1068E EPS12V 24-pin + 8-pin + 8-pin power connectors EPS12V 4-pin power connectors. Primary Information. Mainboard Type :  Servers . Mainboard Form Factor :  SSI EEB . Compatible Processors :  Qua d-Core Xeon 5500 series . Mainboard Chipset Type :  Intel 5520 . Max Bus Speed :  TBD . Audio Output :  Sound card . Video Output Type :  ASPEED AST2050 . Compliant Standards :  Plug and Play FCC Class B certified CE DOC RoHS . Networking Type :  Network adapter - 2 x Intel 82574L - Ethernet Fast Ethernet Gigabit Ethernet . Processor. Processor Max Supported Qty :  2 . Processor / Socket Type :  Socket 1366 . Processor Manufacturer :  I ntel . Memory. RAM... Less

HOME SHIPPING SIGN UP CONTACT US VISIT OUR STORE Camera Cell phone Fashion Gadgets Games Home ACC MP3 Music PC Sports Product Description MainBoard 4 Port USB 2.0 to 9 Pin Header Bracket Extension Cable Please note that we are selling factory direct products. All our products are 100% brand new in manufacturer's packaging. Specifications: Product Name USB 2.0 Type A to 9 Pin Motherboard Header Cable Interface 4 Ports USB 2.0 Type A to 9 Pin Motherboard Header Material Metal, Plastic USB Bracket

Highlight your important messages and awards in Ghent's Indoor Enclosed Bulletin Board with Header. Each enclosed board comes with a customized header panel with matching frame and 6" high white acrylic surface. The header is available with or without a UL-listed fluorescent bulb. A self-healing, natural cork board hides pin holes and withstands years of tacking. Guests can view your documents through the shatter-proof acrylic front, while the two locking doors and aluminum frame keep vandals out. The full-length piano hinge is durable and won't pinch fingers. This Ghent Indoor Enclosed Cork Bulletin Board with Header has two26"W x 44"H viewing areas and comes backed by a 10-year warranty. Made in the USA. Key Features Customized header Standard lettering on header is... Less

Ghent's Combination Boards offer an all-in-one solution for your classroom. This multi-purpose board consists of one 3' x 8' whiteboard, one 1' x 8' header tackboard and two 4' x 2' side tackboards. The magnetic porcelain-on-steel whiteboard resists scratching, staining and ghosting for long-lasting durability, and the resilient tackboards have either a self-healing or a textured surface to conceal pin holes. Each board features a stylish aluminum frame. The modular design allows easy installation and cost-effective renovation. Ghent's innovative Smart-Pak packaging system provides greener, safer and more reliable shipping and includes a recessed marker tray. This 4' x 12' Whiteboard with a Header and Two Side Tackboards is an ideal addition to classrooms, tutoring labs, seminars and... Less

A Personal Creations Exclusive! A tribute to the special women who will always be a part of your life. Tri-metal pin is crafted of German silver, copper and brass. We engrave each woman with any name, up to 6 characters. Pin measures 1 1/8”L and from 1/2-1”W, depending on number of women.

1 x 24-pin ATX main power connector 1 x 4-pin ATX 12V power connector 2 x SATA 6Gb/s connectors 4 x SATA 3Gb/s connectors 1 x mSATA connector 1 x CPU fan header 2 x system fan headers 1 x power fan header 1 x front panel header 1 x front panel audio header 1 x S/PDIF Out header 3 x USB 2.0/1.1 headers 1 x clearing CMOS jumper 1 x Trusted Platform Module (TPM) header External Ports: 1 x PS/2 keyboard/mouse port 1 x parallel port 1 x serial port 1 x optical S/PDIF Out connector 1 x HDMI port 4 x USB 2.0/1.1 ports 2 x USB 3.0/2.0 ports 1 x RJ-45 port 3 x audio jacks (Line In/Line Out/Microphone) The GA-Z68AP-D3 motherboard, based on the Intel Z68 Express Chipset and supporting the new 2nd generation Intel GIGABYTE Z68 motherboards are equipped with the much anticipated Intel Smart Response... Less