Submersible "top discharge" slim - line dewatering pumps are designed for small diameter well casings and other hard to reach applications where other pumps are to large to fit the application space. Pumps are designed with heavy duty hard anodized aluminum and stainless steel hardware for long life and lighter weight. Pumps offer double mechanical seals, upper seal lubricator and class "H" motor insulation. Abraisive resistant stainless steel impellers ( 2 HP to 50 HP ) resist wear from sand , gravel and other abrasive materials. The built in strainer protects large particles from entering the pump. Pumps ( except model PF01311SCV) are supplied with a powder coated steel control enclosure which contains a circuit breaker which protects against short circuit, overload and locked rotor... Less

Submersible "top discharge" slim - line dewatering pumps are designed for small diameter well casings and other hard to reach applications where other pumps are to large to fit the application space. Pumps are designed with heavy duty hard anodized aluminum and stainless steel hardware for long life and lighter weight. Pumps offer double mechanical seals, upper seal lubricator and class "H" motor insulation. Abraisive resistant stainless steel impellers ( 2 HP to 50 HP ) resist wear from sand , gravel and other abrasive materials. The built in strainer protects large particles from entering the pump. Pumps ( except model PF01311SCV) are supplied with a powder coated steel control enclosure which contains a circuit breaker which protects against short circuit, overload and locked rotor... Less

For water supply from wells or reservoirs, domestic use, civil and industrial applications and for garden use and irrigation. Industrial standard, stainless steel housing Brass outlet (discharge): 1 1/4" 3 hp 220v 2.2kw 3.75" diameter Comes with control box featuring: manual On/Off switch, motor overload/thermal protection, capacitor in the box. 100 ft wire included flow rate 8.7 gpm at 262ft. 21.1 gpm at 213ft. 35 gpm at 82ft. max dept:280 ft

Submersible "top discharge" slim - line dewatering pumps are designed for small diameter well casings and other hard to reach applications where other pumps are to large to fit the application space. Pumps are designed with heavy duty hard anodized aluminum and stainless steel hardware for long life and lighter weight. Pumps offer double mechanical seals, upper seal lubricator and class "H" motor insulation. Abraisive resistant stainless steel impellers ( 2 HP to 50 HP ) resist wear from sand , gravel and other abrasive materials. The built in strainer protects large particles from entering the pump. Pumps ( except model PF01311SCV) are supplied with a powder coated steel control enclosure which contains a circuit breaker which protects against short circuit, overload and locked rotor... Less

MAX-E-PRO PUMPS By Sta-Rite SUPERIOR HYDRAULIC DESIGN MOVES MORE WATER, RESULTING IN LOWER ELECTRICAL COSTS This new high efficiency, low maintenance pump is designed for maximum performance for the modern pool. Advanced state-of-the-art hydraulics means that Max-E-Pro delivers more water resulting in lower electrical costs. It will keep your pool crystal clear as well as run your automatic cleaner and any other hydraulic accessories around your pool. Not only is this pump energy efficient, it is ultra quiet. Special dampening in and around the pump’s base makes Max-E-Pro one of the quietest pumps in its class. The extra large 6” trap collects more debris, allowing you to clean the trap less often. Our clear see-thru lid allows you to check for debris without removing the lid. The new... Less

For water supply from wells or reservoirs, domestic use, civil and industrial applications and for garden use and irrigation. Industrial standard, stainless steel housing Brass outlet (discharge): 1” .75 hp (0.55kw), 3450 RPM Comes with control box featuring: manual On/Off switch, motor overload/thermal protection, 20uf/450v capacitor in the box. 100 ft wire included 13gpm at 131ft.

Submersible "top discharge" slim - line dewatering pumps are designed for small diameter well casings and other hard to reach applications where other pumps are to large to fit the application space. Pumps are designed with heavy duty hard anodized aluminum and stainless steel hardware for long life and lighter weight. Pumps offer double mechanical seals, upper seal lubricator and class "H" motor insulation. Abraisive resistant stainless steel impellers ( 2 HP to 50 HP ) resist wear from sand , gravel and other abrasive materials. The built in strainer protects large particles from entering the pump. Pumps ( except model PF01311SCV) are supplied with a powder coated steel control enclosure which contains a circuit breaker which protects against short circuit, overload and locked rotor... Less

Pump, Deep Well Submersible, Number Of Wires 3, Control Box Required 1lzx2, 7 Gpm, 1/2 Hp, Voltage 115, 1 Phase, Stages 9, Built-in Check Valve, Pump Material Thermoplastic, Impeller Material Noryl, Discharge Port 1 1/4 In., Flow Ranges 10 - 4 Gpm, Max. Operating Temp. 86 F, Pump-motor Shell Stainless Steel, Max. Head 265 Ft., Well Capacity Low, Recommended Tank 4my59, 3ya59, Sf Amps 12

Submersible "top discharge" slim - line dewatering pumps are designed for small diameter well casings and other hard to reach applications where other pumps are to large to fit the application space. Pumps are designed with heavy duty hard anodized aluminum and stainless steel hardware for long life and lighter weight. Pumps offer double mechanical seals, upper seal lubricator and class "H" motor insulation. Abraisive resistant stainless steel impellers ( 2 HP to 50 HP ) resist wear from sand , gravel and other abrasive materials. The built in strainer protects large particles from entering the pump. Pumps ( except model PF01311SCV) are supplied with a powder coated steel control enclosure which contains a circuit breaker which protects against short circuit, overload and locked rotor... Less

This Franklin 4in. deep well submersible delivers 10 GPM of water to meet most residential needs. Submersible design eliminates the need for priming and creates quiet operation. U.S.A. HP: 1, Flow (GPH): 455 @ 140ft.D, 50PSI, Volts: 230, Max. Total Head (ft.): 275, Max. Suction Lift (ft.): 275, Max. PSI: 202, Discharge Port (in.): 1 1/4, Pump Housing: Stainless steel, Impellers: Thermoplastic for corrosion- resistance, Diffusers: Thermoplastic for corrosion- resistance, Intake screens: Thermoplastic for corrosion- resistance, Control Box Included: No, Thermal Overload Protection: Yes, Dimensions L x W x H (in.): 4 x 4 x 30

TB75S10-4 3/4 HP Stainless Steel Submersible Deep Well Pump 8.9 GPM @ 100' (50 PSI)Corrosion- Resistant Stainless Steel Motor Enclosure, Pump Shell, and Fasteners Heavy-Duty Thermoplastic Impellers, Diffusers, Intake Screen, and Check Valve High-Efficiency, Hermetically Sealed Motor is Thermally Protected to Prevent Overheating Submersible 4" Design Eliminates the Need for Priming and Creates Quiet Operation 2-Wire 240 Volts 1 - 1/4" NPT Discharge 20' - 175' Well Depth Shipping Weight, 27 lbs If

Submersible "top discharge" slim - line dewatering pumps are designed for small diameter well casings and other hard to reach applications where other pumps are to large to fit the application space. Pumps are designed with heavy duty hard anodized aluminum and stainless steel hardware for long life and lighter weight. Pumps offer double mechanical seals, upper seal lubricator and class "H" motor insulation. Abraisive resistant stainless steel impellers ( 2 HP to 50 HP ) resist wear from sand , gravel and other abrasive materials. The built in strainer protects large particles from entering the pump. Pumps ( except model PF01311SCV) are supplied with a powder coated steel control enclosure which contains a circuit breaker which protects against short circuit, overload and locked rotor... Less

Goulds Bruiser Pump 3/4 HP 10 GPM Submersible water well pump that features abrasive handling construction, stainless steel casing, and a check valve that can be easily removed for drain-back systems or replacement. Manufacturer: Goulds Model: 10SB07-412 Horsepower: 3/4 GPM: 10 Voltage: 230V, 60HZ Phase: Single-Phase, 3-wire Features: Pump can be operated continuously without damage to the motor. Metal Parts are Stainless Steel: AISI types 301 and 304 are corrosion resistant, non-toxic and non-leaching. Non-Metallic Parts are FDA Compliant: Impellers, diffusers and bearing spiders are constructed of a glass filled, corrosion resistant engineered composite. Discharge Head: Engineered composite material for superior strength and corrosion resistance. Loops for safety line molded into head... Less

Submersible "top discharge" slim - line dewatering pumps are designed for small diameter well casings and other hard to reach applications where other pumps are to large to fit the application space. Pumps are designed with heavy duty hard anodized aluminum and stainless steel hardware for long life and lighter weight. Pumps offer double mechanical seals, upper seal lubricator and class "H" motor insulation. Abraisive resistant stainless steel impellers ( 2 HP to 50 HP ) resist wear from sand , gravel and other abrasive materials. The built in strainer protects large particles from entering the pump. Pumps ( except model PF01311SCV) are supplied with a powder coated steel control enclosure which contains a circuit breaker which protects against short circuit, overload and locked rotor... Less

Pump, Deep Well Submersible, Number Of Wires 3, Control Box Required 1lzx4, 7 Gpm, 3/4 Hp, Voltage 230, 1 Phase, Stages 12, Built-in Check Valve, Pump Material Thermoplastic, Impeller Material Noryl, Discharge Port 1 1/4 In., Flow Ranges 10 - 4 Gpm, Max. Operating Temp. 86 F, Pump-motor Shell Stainless Steel, Max. Head 350 Ft., Well Capacity Low, Recommended Tank 4my59, 3ya61, Sf Amps 8

Our MHP and MHPU pumps are ideal for filtration pumps as well as maximum flow situations, such as waterfalls and water features. Jandy MHP and MHPU pump series are made of 303 grade stainless steel corrosion- resistant material for long term reliability. Proprietary impeller and pump body designs deliver ultra-quick primes, superior performance and whisper-quiet operation. Please note that Jandy has replaced their MHPU pumps with a new line called MaxHP. If you are looking to replace an old MHPU model, we recommend contacting Jandy to determine which MaxHP pump is the proper replacement. Jandy's technical support can be reached by calling 1-800-227-1442 and pressing 5. Features: Medium head, high flow pumps 2” quick connect full flow unions included Self-aligning oversized strainer basket... Less

3-Wire (plus ground) 3/4 HP, 230V, 3450 RPM, 60 Hz, 1 PH, 12 Stage submersible motor Made of non-corrosive 316 stainless steel NEMA standard stainless steel interchangeable pump end Precision machined stainless steel impellers and diffusers 1-1/4 inch NPT stainless steel discharge 48" motor lead Thermally protected Built-in lightening arrestor Built-in suction screen to prevent pump damage from abrasive material Large cable guard to accommodate motor lead Built-in safety rope adaptor Manufactured for long term endurance and performance Performance (Gallons Per Hour @ 50 PSI): 749 GPH @ 60'; 701 GPH @ 80'; 655 GPH @ 100'; 609 GPH @ 120'; 560 GPH @ 140'; 497 GPH @ 160' Optimum Performance Range with 20/40 PSI pressure switch: 114' to 198' Optimum Performance Range with 30/50 PSI pressure... Less

Pump, Deep Well Submersible, Number Of Wires 3, Control Box Required 1lzx3, 7 Gpm, 1/2 Hp, Voltage 230, 1 Phase, Stages 9, Built-in Check Valve, Pump Material Thermoplastic, Impeller Material Noryl, Discharge Port 1 1/4 In., Flow Ranges 10 - 4 Gpm, Max. Operating Temp. 86 F, Pump-motor Shell Stainless Steel, Max. Head 265 Ft., Well Capacity Low, Recommended Tank 4my59, 3ya60, Sf Amps 6

This Franklin 4in. deep well submersible delivers 10 GPM of water to meet most residential needs. Submersible design eliminates the need for priming and creates quiet operation. U.S.A. HP: 3/4, Flow (GPH): 535 @ 100ft.D, 50 PSI, Volts: 230, Max. Total Head (ft.): 175, Max. Suction Lift (ft.): 175, Discharge Port (in.): 1 1/4, Pump Housing: Stainless steel, Impellers: Thermoplastic for corrosion- resistance, Diffusers: Thermoplastic for corrosion- resistance, Intake screens: Thermoplastic for corrosion- resistance, Control Box Included: No, Thermal Overload Protection: Yes, Dimensions L x W x H (in.): 4 x 4 x 24

In it's original box, box is a little beat up, pump is in sealed pouch with all original paperwork. PumpSaver 231 INSIDER-P Pump Protection SymComs Model 231-Insider-P single-phase PumpSaver Plus fits inside ¹, ½, ¾, and 1hp 230V control boxes and is designed to protect single-phase pumps from dry-well, dead-head, jammed impeller, rapid-cycle, overvoltage, and undervoltage condi tions. Manufacturer: SymCom Model: 231INSIDER-P Product Information: SymComs Model 231-Insider-P single

ORDER JETS SEPARATELY. One piece threaded shaft for positive impeller drive and alignment. Stainless steel for maximum corrosion resistance. Features over-the-well bolt-on capability with a special casing adapter for 2" and 3" single pipe installation, an d offset single pipe applications to the MS bolt-on deep well jet pump. Precision machined, close grained cast iron pump body and base are specially treated to resist corrosion. Automatic pressure regulator is faster acting and quieter. Design eliminates hunting for correct drive pressure. New improved stem and guide are precisely molded to assure efficient trouble-free performance on all deep wells precision molded for perfect balance. Lexan impellers are extra smooth for highest performan

Big John 1/3 HP 46 GPM Submersible Sump Pump with Mechanical Float Switch For residential and light commercial use, the 1/3 HP, automatic submersible sump pump provides efficient and reliable service. Pumps feature a 1-1/2" discharge with 18 maximum head. Cast iron motor housing is oil-filled for lifetime lubrication and excellent heat dissipation. Polycarbonate cover and polypropylene volute-base.1/3 HP shaded pole motor with overload protectionDesigne d for continuous dutyEpoxy coated cast iron housing1-1/4" (31.7 mm) adapter and 3/4" (19 mm) garden hose adapter availableCarbon/c eramic shaft sealUpper and lower sintered sleeve bearingsMultiple switch options for automatic operationMultiple power cord lengths availableUL / CSA listed

Pump, Deep Well Submersible, Number Of Wires 3, Control Box Required 1lzx4, 10 Gpm, 3/4 Hp, Voltage 230, Amps Ac 8, 1 Phase, Stages 8, Built-in Check Valve, Pump Material Plastic Composite, Impeller Material Celcon, Discharge Port 1.25 In., Flow Ranges 5 - 13 Gpm, Max. Operating Temp. 86 F, Pump-motor Shell Stainless Steel, Max. Head 291 Ft., Well Capacity Average, Recommended Tank 3ya57, 3ya58, 4my61

For water supply from wells or reservoirs, domestic use, civil and industrial applications and for garden use and irrigation. Industrial standard, stainless steel housing Brass outlet (discharge): 1 1/4" 3 hp 2850 RPM 2.2kw 220v Build-in check valve 13 stage 3.75" diameter Comes with control box featuring: manual On/Off switch, motor overload/thermal protection, capacitor in the box. 100 ft wire included flow rate 8.7gpm at 305ft. 17.6gpm at 269ft. 35gpm at98 ft. max dept:331 ft

The B847 3/4 Horsepower Square Flange Full Rated replacement Pool Pump Motor by AO Smith fits the Sta-Rite Max-E-Pro, Max-E-Glas, Max-E-Glas II, Dura-Glas, Dura-Glas II, Dyna-Glas and Dyna-Max as well as the Pentair WhisperFlo, Challenger, SuperFlo and Pinnacle pumps and the Anthony AR2 Series. The B847 has a square mounting face for the pump attachment, with 4 non-threaded bolt holes to attach the pump and a threaded shaft. AO Smith motors are usually the original motor that came with your pool pump so there should not be issues with compatibility. AO Smith pool pump motors have a 2 year manufacturers limited warranty - 2 years from the manufacture date. www. aosmithmotors. com.

3-Wire (plus ground) 1 HP, 230V, 3450 RPM, 60 Hz, 1 PH, 15 stage Franklin Electric submersible motor Made of non-corrosive 316 stainless steel NEMA standard stainless steel interchangeable pump end Precision machined stainless steel impellers and diffusers 1-1/4 inch NPT stainless steel discharge 48" motor lead Thermally protected Built-in lightening arrestor Built-in suction screen to prevent pump damage from abrasive material Large cable guard to accommodate motor lead Built-in safety rope adaptor Manufactured for long term endurance and performance Performance (Gallons Per Hour @ 50 PSI): 759 GPH @ 100'; 720 GPH @ 120'; 684 GPH @ 140'; 647 GPH @ 160'; 610 GPH @ 180'; 571 GPH @ 200'; 510 GPH @ 225' Optimum Performance Range with 20/40 PSI pressure switch: 156' to 267' Optimum... Less

Pump, Deep Well Submersible, Number Of Wires 3, Control Box Required 1lzx3, 10 Gpm, 1/2 Hp, Voltage 230, Amps Ac 6, 1 Phase, Stages 6, Built-in Check Valve, Pump Material Stainless Steel, Impeller Material Celcon, Discharge Port 1.25 In., Flow Ranges 5 - 13 Gpm, Max. Operating Temp. 86 F, Pump-motor Shell Stainless Steel, Max. Head 231 Ft., Well Capacity Average, Recommended Tank 3ya57, 3ya58, 4my61

3/4 HP Goulds J7S Shallow Well Pump/Irrigation/W ater Pump GOULDS J7S 3/4HP SHALLOW WELL PUMP, 115/230 VOLTS Cottages SPECIFICATIONS Pump: Pipe connections: 1¼" NPT suction 1" NPT discharge. Pressure switch: AS4 preset (30-50 PSI). Motor: NEMA standard. 60 Hz. ½ 1½ HP, 115/230 V capacitor start. Single phase. 3500 RPM. Built-in overload with automatic reset. Stainless steel shaft. Rotation: clockwise when viewed from motor end. UL778 listed. FEATURES Compact: Design has an integral shallow well adapter built into the casing, which eliminates the need for a separate shallow well adapter. Serviceable: Back pullout design allows disassembly of pump for service without disturbing piping. Two compartment motor for easy access to motor wiring and replaceable components. Nozzle... Less

Economical, energy-efficient pumps for 4in. inside diameter or larger wells. Pump from depths of 200 feet. Patented Floating Stack design resists sand and reduces sand locking. Stainless steel pump and motor housing for long life. Heavy-duty 1 1/4in. NPT discharge connection. Water-filled submersible motor. Precision-molded impellers and diffusers. 230 Volts. UL approved. U.S.A. HP: 3/4, Flow (GPH): 600, Volts: 230, Amps: 6.8, Max. Total Head (ft.): 200, Suction Port (in.): 1 1/4, Discharge Port (in.): 1 1/4, Pump Housing: Stainless steel, Impellers: Precision- molded, Diffusers: Precision- molded, Control Box Included: No

Pump, Deep Well Submersible, Number Of Wires 3, Control Box Required 1lzx6, 10 Gpm, 1 1/2 Hp, Voltage 230, Amps Ac 11.5, 1 Phase, Stages 15, Built-in Check Valve, Pump Material Stainless Steel, Impeller Material Celcon, Discharge Port 1.25 In., Flow Ranges 5 - 13 Gpm, Max. Operating Temp. 86 F, Pump-motor Shell Stainless Steel, Max. Head 399 Ft., Well Capacity Average, Recommended Tank 3ya57, 3ya58, 4my61