Standby Generator, Automatic, 10 Kw, 10 Kva Rating, 240 Voltage, 41.7/37.5 Amps @ 120/240v, 1 Phase, 41.7 Amps, Single Phase, 60 Hz, Ng/lp Fuel, Engine Rpm 3600, Engine Size 803cc, 35 Length (in.), 39 Height (in.), 40 Width (in.), Fuel Npt Pipe Connection Sz. 3/4 In., Ng Load Consumption (cu.-ft./hr.) 82, Propane Load Consumption (cu.-ft./hr.) 43, Propane Load Consumption (gph) 1.2, Min. Gas Pressure @ Generator (in Wc) 11 In., Engine Brand Briggs & Stratton, Engine (cooling) Air

Maintenance Kit for 7kw Stand-By Generator - Includes UL approved Air Cleaner, Spark Plug, Oil Filter, 48 oz. Of 5W-30 Synthetic Oil and Oil Fill Cap. 6.00 L. 6.00 W. 14.00 H.

Maintenance Kit for 10-12kw Stand-By Generators - Includes UL approved Air Cleaner, Pre-Cleaner, Spark Plugs, Oil Filter, 80 oz. Of 5W-30 Synthetic Oil and Oil Fill Cap. 6.00 L. 12.00 W. 14.00 H.

DLW400ESAWR Features: -Kubota 400 DC Welder CC / CV, 14 kW Generator T-4 (2) Remote Controls Installed. -Draws simultaneous AC power while welding. -The convenience of one-man or two man operation. -Arc force control allows the operator to fine tune DC current during low voltage welding conditions and helps prevent electrodes forms sticking during short arc length welding. -Smooth arc characteristics and more consistent, quality welds. -Super clean voltage regulation 1.5pct (+/-). -Tier 4 Kubota diesel engine V1305. -Remote control allow operator to work 100 feet (30.5 meters) from the welder. -E-mode improves fuel efficiency by allowing operator to weld at idle up to 240 amps. -Noise level produces only 67.5 dBA. Specifications: -Item # DLW400ESAWR. -DC Voltage: CC: 34, 2 x 27cc V. -DC... Less

This items qualifies for free shipping ! New Page 1 18Kw 240V 3Ph Commercial Steambath Steam Generator ASME Steam Pressure Vessels Built to the ASME Boiler and Pressure Vessel Code Requirements and are National Board Registered Use High Quilaty Fibrous Glass Pressure Vessel Insulation for Maximum Energy Performance Feature Stainless Steel Heating Elements for Corrosion Resistance With ASME Grade Flanges for Longevity and Reliable Performance Vertical Construction Results in Small Footprint for Location Within the Tightest of Mechanical Rooms Integrated Base Eliminates the Need For a Stand Steam-Rated Operating and High Limit Pressure Controls For Steam-On-Demand Features an Integral Pressure Gauge and Sight Glass to Provide Operating Information at a Glance Standard With a Full... Less

For an extra degree of weather protection, you can rely on our extreme cold weather kits to keep your Generac liquid-cooled automatic standby generator performing in the harshest of conditions.  A block heater works in conjunction with the corresponding battery warmer assembly to ensure quick starting capability. Purchase with the appropriate cold weather kit for all necessary components to outfit your generator.

The Generac 25kW 240 Volt standby air-cooled generator produces up to 25kW of continuous power. Reliable Generac gas fueled 1.6L engine with low-oil pressure shutdown system. Flexible fuel line connector and digital LED controller. UV/Ozone resistant hoses and 1% voltage regulation. Durable steel enclosure withstands the harshest environments. Closed coolant recovery system. Powered by natural gas or LP gas for added versatility. EPA and SCAQMD compliant. All generator sales are final. 79.00 L. 39.00 W. 43.00 H.

This items qualifies for free shipping ! New Page 1 Cu18Kw 480V 3Ph Commercial Steambath Steam Generator ASME Steam Pressure Vessels Built to the ASME Boiler and Pressure Vessel Code Requirements and are National Board Registered Use High Quilaty Fibrous Glass Pressure Vessel Insulation for Maximum Energy Performance Feature Stainless Steel Heating Elements for Corrosion Resistance With ASME Grade Flanges for Longevity and Reliable Performance Vertical Construction Results in Small Footprint for Location Within the Tightest of Mechanical Rooms Integrated Base Eliminates the Need For a Stand Steam-Rated Operating and High Limit Pressure Controls For Steam-On-Demand Features an Integral Pressure Gauge and Sight Glass to Provide Operating Information at a Glance Standard With a... Less

DLW300ATMP Features: -Kubota Diesel 300 DC Welder / 10.5 kW Generator T-4 Mounted on TRLRMP. -Voltage regulation is maintained at 1.5pct. -Emits 65dBA at 23 feet (6.9 meters). -Produces up to 300 amps as a Welder Generator. -Arc force control allows the operator to fine tune DC current during low voltage welding conditions and helps prevent electrodes forms sticking during short arc length welding. -Safety shutdowns, lifting bale, and external water, oil and fuel drains. -E-mode allows you to weld at 160 amps at idle. -Trailer TRLRMP mounted. Specifications: -Item # DLW300ATMP. -DC Voltage: CC: 31 V. -DC Current: CC: 300 A. -Current Range: 35-300 A. -Max Duty Cycle with Full Amps Available: 100pct @280 A. -Welding Processes: SMAW, FCAW, GMAW, GTAW, ACAC. -Fuel Tank Capacity: 9.5 gallons... Less

Steamist SM-11 Steam Generator Features 5-Year Parts Warranty - 2-Year Labor Warranty Generator Typically Can be Installed up to 25 ft. from the Bathing Area Diagnostic LED Displays Stainless Steel Construction Solid-State Circuitry Codes/Standard UL 499 UL/cUL Listed City of LA- Approved City of New York - M.E.A Approved State of Mass. Approved Important In order for the InstaMist feature to function on model SM-11-IM, Water must Always be in the Tank. For this Reason the Optional Auto Drain is NOT Available with any InstaMist Generators. Product Information Water Supply - 3/8" Compression Fitting Steam Line - 3/4" Brass NPT Male Thread Pressure Relief Valve - 3/4" NPT Female Thread Drain Line - Capped 1/2" Brass NPT Male Thread. Auto Drain Ready Except for InstaMist (IM) Models. KW... Less