Category

Sport and Outdoor
Showing results for "357 sig~NS%961~linkin id%968013487"
Results 1 - 40 of 1500+

Redding Trim Die 357 Sig

$52.49
MidwayUSA Redding Trim Die 357 Sig
+ $4.99 shipping
/redding-trim-die-357-sig/-yG1wUfFHD5SxHW4oRLjKg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding Trim Dies allow you to file trim your cases without unnecessary resizing because they are made to chamber dimensions. Other manufacturers use sizing die dimensions, forcing you to full length resize when trimming. For case forming and necking brass down from another caliber, Redding Trim Dies can be the perfect intermediate step before full length resizing. Technical InformationMateri al: Steel Die Type: Trim Die ONLY Accessories: Plastic storage case Notes: These trim dies allow you to file trim your cases without unnecessary resizing because they are made to chamber dimensions. This die requires an extended shellholder available from Redding. Form die must be purchased separately.
More

Starline Reloading Brass 357...

$179.99
MidwayUSA Starline Reloading Brass 357 Sig Box of 1000 (Bulk Packaged)
+ $12.49 shipping
/starline-reloading-brass/sysOky-L1UzOdh1ZDh7hbA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Starline Brass prides itself on producing the highest quality brass case available. Their brass is comprised of 70% copper and 30% zinc and is vertically drawn during the manufacturing process which results in more uniform wall thickness. Cases are annealed between each draw to ensure consistent metallurgy in all lots. Each brass case is hand inspected to guarantee the highest quality possible. Starline Brass is located in Sedalia, MO and has been in business for over 30 years. Trust Starline for your next reloads, you won't be disappointed. New, unprimed brass. This is not loaded ammunition. Bulk brass should be full-length sized, trimmed and chamfered before loading. Technical Information Caliber: 357 Sig Preparation: Due to the manufacturing process and/or shipping, case mouths may not... Less
More

RCBS Extended Shellholder #27...

$28.49
MidwayUSA RCBS Extended Shellholder #27 (357 Sig, 40 S&W, 10mm Auto)
+ $4.99 shipping
/rcbs-extended-shellholder/fnxHQE8sYnwVLs6JpUpChw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Used for working short cases. Perfect for using the RCBS Competition Seating Die or Trim Die. Works for single stage presses only.Technical InformationMateri al: Steel Fits: 357 Sig 40 S&W 10mm Auto Notes: Extended shellholder allows working with shorter cartridge lengths and in custom applications Extra-Long Extended shellholder is used in some case-forming operations and in custom applications Extended Shellholders do not have a hole drilled out to decap brass during the sizing operation
More

Redding G-RX Base Sizing Die...

$40.99
MidwayUSA Redding G-RX Base Sizing Die Kit 40 S&W, 357 Sig, 10mm Auto
+ $4.99 shipping
/redding-grx-base-sizing/Y7rEmaeJyHqekEjGiyOm6Q==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Redding G-Rx Base Sizing Die meets the need of the reloader needing to reload brass shot through some of the most popular autoloaders today. These autoloaders, when fired, produce a bulge at the bottom of the brass, which normal sizing dies can not reach and remove, rendering the brass unusable. Simply push the brass through the sizing die and the bulge in the web of the brass is removed. This step fully sizes the brass back within the accepted SAAMI specification for brass diameter. After the brass has been pushed through the die it may be resized in a standard sizing die allowing once unusable brass to be reloaded normally. Technical Information Notes The G-Rx die set comes packaged with a pusher rod which fits into the ram like a shell holder and the unique push through sizing die... Less
More

Hi-Viz Glock Rear Sight for...

$39.99
Groupon Hi-Viz Glock Rear Sight for 9mm - 40 and 357 Sig
Free Shipping
/hiviz-glock-rear-sight/jzZPwJN2D1iCulLIydcNEA==/info
Groupon
IN_STOCK ( In stock )
Store not rated
Free Shipping
Hi-Viz Litewave rear sight for Glock Models 9mm, .40 S&W, and 357Sig will make aiming faster, smoother and with better results. Whether you're testing at the range or you need your Glock for self defense, a Hi-Viz Litewave sight will make you a better shot. Rear sight kit comes with interchangeable Lite Pipes in red, green and black.
More

Redding Trim Die 357 Sig

$52.49
MidwayUSA Redding Trim Die 357 Sig
+ $4.99 shipping
/redding-trim-die-357-sig/-yG1wUfFHD5SxHW4oRLjKg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding Trim Dies allow you to file trim your cases without unnecessary resizing because they are made to chamber dimensions. Other manufacturers use sizing die dimensions, forcing you to full length resize when trimming. For case forming and necking brass down from another caliber, Redding Trim Dies can be the perfect intermediate step before full length resizing. Technical InformationMateri al: Steel Die Type: Trim Die ONLY Accessories: Plastic storage case Notes: These trim dies allow you to file trim your cases without unnecessary resizing because they are made to chamber dimensions. This die requires an extended shellholder available from Redding. Form die must be purchased separately.
More

Starline Reloading Brass 357...

$94.99
MidwayUSA Starline Reloading Brass 357 Sig Box of 500 (Bulk Packaged)
+ $10.79 shipping
/starline-reloading-brass/Vg5aoJw5HxZ6rFA-qtFq6Q==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Starline Brass prides itself on producing the highest quality brass case available. Their brass is comprised of 70% copper and 30% zinc and is vertically drawn during the manufacturing process which results in more uniform wall thickness. Cases are annealed between each draw to ensure consistent metallurgy in all lots. Each brass case is hand inspected to guarantee the highest quality possible. Starline Brass is located in Sedalia, MO and has been in business for over 30 years. Trust Starline for your next reloads, you won't be disappointed. New, unprimed brass. This is not loaded ammunition. Bulk brass should be full-length sized, trimmed and chamfered before loading. Technical Information Caliber: 357 Sig Preparation: Due to the manufacturing process and/or shipping, case mouths may not... Less
More

M&P 357sig/40s&W Magazines -...

$34.99
Brownells M&P 357sig/40s&W Magazines - M&P .357 Sig/40 S&W, 15-Rounds
+ $7.95 shipping
/mp-357sig40sw/VPjGWWb-NWIBLTsJv2WX5w==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Brand-new replacement magazines from your pistol's manufacturer ensure your spare mags work just as well in your M&P as the ones that came with the gun. Have plenty on hand a personal defense or carry pistol is only as reliable as the magazine in it. Mfg: Smith & Wesson SPECS: Steel bodies, polymer followers and base pads, black.
More

P320/P250 Magazines -...

$41.99
Brownells P320/P250 Magazines - Magazine, 250, 320, 40/357 Sig, Compact, 13 Rd
+ $7.95 shipping
/p320p250-magazines/gSbeYHmOnMH680Y5jlshwg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Handgun Magazines for the Sig Sauer P320/P250. Mfg: Sig Sauer
More

Sig Sauer Magazine Sig Sauer...

$39.99
MidwayUSA Sig Sauer Magazine Sig Sauer P224 357 Sig, 40 S&W 10-Round Steel Matte
+ $4.99 shipping
/sig-sauer-magazine-sig/0lelQOeB9QaYdN_VjOwRug==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Features Genuine Sig Sauger replacement magazineRugged steel bodyFactory fit and finish This Sig Sauer Magazine is a factory original replacement part, manufactured to the same specifications and tolerances using the same materials as the OEM magazine that came with the pistol, guaranteeing optimal fit and reliable operation. When it comes to semi-automatic firearms, the ammunition feeding device often determines if, and how well, the gun functions. Therefore, whether for use as a backup mag for your concealed carry pistol or simply for saving a little reloading downtime at the range, keeping a few spare factory magazines handy is never a bad idea. Technical Information Fit: Sig P224 Caliber: 357 Sig, 40 S&WCapacity: 10-RoundFinish: Black MatteBody Material: SteelBase pad: Polymer
More

P320/P250 Magazines -...

$43.99
Brownells P320/P250 Magazines - Magazine, 250, 320, 40/357 Sig, Full, 14 Rd
+ $7.95 shipping
/p320p250-magazines/rYp8c9MdIWjN6qvixO-soQ==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Handgun Magazines for the Sig Sauer P320/P250. Mfg: Sig Sauer
More

Waves Sig. Series Vocals

$399.00
Waves.com Waves Sig. Series Vocals
No Shipping Info
/waves-sig-series-vocals/E3ebB28Aj5wGC7xRcDTXrg==/info
Waves.com
IN_STOCK ( In stock )
Store not rated
The best of Waves Signature Series for vocals in one bundle with four custom vocal processing chains from the world's most successful producers and mixing engineers.
More

Petzl Linkin Leash One Color,...

$15.95
Backcountry.com Petzl Linkin Leash One Color, One Size
+ $7.95 shipping
/petzl-linkin-leash-one/0COM06DT_MYWAmMuUU8OqA==/info
Backcountry.com
IN_STOCK ( In stock )
Keep your self-arrest tool secure with the Petzl Linkin Leash. Compatible with any ice axe, the Linkin Leash can be adjusted between 19. 5 and 29. 5 inches. If needed, the leash can be quickly removed from your ice tool simply by untying the knot.
More

RCBS 2-Die Set 357 Sig

$29.99
MidwayUSA RCBS 2-Die Set 357 Sig
+ $7.59 shipping
/rcbs-2die-set-357-sig/X09dz11jhCLwMidGqRZ_2w==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
RCBS has been making some of the best reloading equipment for over 60 years. Their 2-Die sets are known in many reloading circles for their high-quality. Each 2-Die Set includes a full length sizer die has an expander- decapping unit to remove the spent primer while expanding the case mouth. Vent holes prevent case damage caused by trapped air or excessive lubricant. The seater die includes a bullet seater plug and built-in roll or taper crimp as appropriate for the particular cartridge. Shellholders sold separately. Technical Information Material: Polished and Heat Treated Steel Accessories: Plastic Storage Case Notes: Lifetime Guarantee from RCBS
More

P226 9mm Parts Kit - Sig...

$30.99
Brownells P226 9mm Parts Kit - Sig Sauer P229 40sw/357sig Parts Kit
+ $7.95 shipping
/p226-9mm-parts-kit-sig/BVRcU3GHZ59h5Ue5la4u2Q==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Sig Sauer Parts Kits allow for periodic maintenance of Sig pistols. The kits include a selection of the most frequently requested replacement parts. Kits include: decocking lever spring, slide catch lever spring, trigger bar spring, recoil spring, slide pins & grip screws. Note, kits for P220 & P232 also include washers with the grip screws. Mfg: Sig Sauer
More

Waves MM Sig. Series

$399.00
Waves.com Waves MM Sig. Series
No Shipping Info
/waves-mm-sig-series/w6ZiaGu7hgz420wYWKqssQ==/info
Waves.com
IN_STOCK ( In stock )
Store not rated
The Manny Marroquin Signature Series includes six plugins created in collaboration with GRAMMY® award-winning mixing engineer Manny Marroquin (Rihanna, Bruno Mars, Alicia Keys)
More

Redding Sizer Die 357 Sig

$56.49
MidwayUSA Redding Sizer Die 357 Sig
+ $4.99 shipping
/redding-sizer-die-357-sig/kk9RFN7bNTax_Y44Wrgd_A==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding Sizer Dies for straight wall cases fully resize the case walls and return the dimensions to SAAMI specifications. These dies also include a decapping assembly. Like all Redding dies, these dies are carefully machined out of high quality steel alloy and then hand polished for reliability and consistent performance. Technical InformationMateri al:Steel Die Type Included: Full Length Sizing Die (with decapping rod assembly) Accessories: Plastic Storage Box Notes: This die is used to squeeze the enlarged case back to its proper size and also deprimes it.
More

RCBS Competition Extended...

$28.49
MidwayUSA RCBS Competition Extended Shellholder #27 (357 Sig, 40 S&W, 10mm Auto)
+ $4.99 shipping
/rcbs-competition-extended/x3qC8f74LMXAvCaeNit8-g==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Used for reloading short cartridges when using the RCBS Competition Seating die.Technical InformationMateri al: Steel Fits: 357 Sig 40 S&W 10mm Auto Notes: Extended shellholder allows working with shorter cartridge lengths and in custom applications Extra-Long Extended shellholder is used in some case-forming operations and in custom applications Competition shellholders are black oxide coated Extended Shellholders do not have a hole drilled out to decap brass during the sizing operation
More

Redding 3-Die Set 357 Sig

$92.99
MidwayUSA Redding 3-Die Set 357 Sig
+ $8.39 shipping
/redding-3die-set-357-sig/kGdn3hZ4BBaDlnma6cnONw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding 3-Die Sets are available for rifle and pistol cartridges. The pistol sets contain a full length sizing die, expander die, and bullet seating die. The rifle sets contain a full length sizing die, neck sizing die, and a bullet seating die. The full length sizing die features a decapping rod assembly with neck expander. The expander die includes a neck expanding plug and the seating die features a built-in crimping ring and seating plug. This combination is sure to produce consistent, reliable ammunition time and time again. Shellholder sold separately. Made in the USA. Technical InformationMateri al: Steel Die Types Included: Full Length Sizer Die (with decapping unit) Expander Die for Pistol Sets and Neck Sizing Die for Rifle Sets Profile or Taper Crimp Seater Die (with built in... Less
More

Linkin' Framed Art Print

$32.00
Society6 Linkin' Framed Art Print
+ $11.00 shipping
/linkin-framed-art-print/2rq7dre8JRPW3w2KGXEpCg==/info
Society6
IN_STOCK ( In stock )
Store not rated
Linkin' Scoop Black MINI Framed Art Print by Alec Goss. People, Collage, Illustration, Graphic Design. Choose from a variety of frame styles, colors and sizes to compliment your favorite Society6 gallery, or fine art print - made ready to hang. Fine-crafted from solid woods, premium shatterproof acrylic protects the face of the art print, while an acid free dust cover on the back provides a custom finish. All framed art prints include wall hanging hardware.
More

Hornady Lock-N-Load AP...

$33.99
MidwayUSA Hornady Lock-N-Load AP Progressive Press Shellplate #10 (357 Sig, 40 S&W, 10mm Auto)
+ $4.99 shipping
/hornady-locknload-ap/h5e5LjtBYe_82PTuQBUINg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Hornady Lock-N-Load AP Progressive Press Shellplate makes changing calibers a breeze on your Hornady Lock-N-Load Press and the older Hornady Projector Press. There is a shellplate available to fit almost every caliber. The shellplate numbers correspond with the Hornady shellholder numbers for different calibers. These shellplates are designed to work with the EZ-Ject System and Pro-Jector presses. Technical Information Press: Hornady Lock-N-Load AP Material: Steel Notes: Fits: 357 Sig 40 S&W 10mm Auto
More

RCBS Trim Die 357 Sig

$30.49
MidwayUSA RCBS Trim Die 357 Sig
+ $4.99 shipping
/rcbs-trim-die-357-sig/SKnfXGIADxbIxNZc6sMXbg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Doubling as a case length gage, this die will quickly allow the reloader to see if the case is too long. If the case is too long, the case will stick out above the top of the die. To get the case to the correct size, file the case down until it's flush with the top of the die. The Trim Die has been case hardened, hand polish and heat treated to withstand a file bearing against the top surface without causing damage to the die. Shellholder sold separately. Technical InformationMateri al: Heat-Treated Steel Die Type Included: Trim Die Accessories: Plastic storage case Notes: Standard 7/8-14 thread. The trim die doubles as a visual case length gauge. Run a case into the trim die and if the case stck out above the top of the die, it's too long. File the case down until it is flush with the... Less
More

Redding Expander Die 357 Sig

$38.49
MidwayUSA Redding Expander Die 357 Sig
+ $4.99 shipping
/redding-expander-die-357/gLRosk2heayF4NAQlScSgQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding Expander Dies flare the case mouth slightly to facilitate bullet seating. These dies are held to strict manufacturing tolerances at all stages and are heat treated to relieve stress and provide a lifetime of use. Made in the USA. Technical InformationMateri al: Steel Die Type: Expander Die Accessories: Plastic storage case Notes: Straight wall cases require an extra die to expand the case mouth.
More

Waves JJP Sig. Series

$399.00
Waves.com Waves JJP Sig. Series
No Shipping Info
/waves-jjp-sig-series/e_CTjtYC5RqYPEumlNEqkw==/info
Waves.com
IN_STOCK ( In stock )
Store not rated
Created in collaboration with producer / mixer Jack Joseph Puig, this collection delivers JJP's iconic pop/rock sound in six intuitive audio plugins.
More

Redding Shellholder #5 (357...

$10.79
MidwayUSA Redding Shellholder #5 (357 Sig, 40 S&W, 10mm Auto)
+ $4.99 shipping
/redding-shellholder-5/b2HvvxAAAUKkHJ4DSX67DQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These quality steel shellholders firmly hold a case in place for all reloading operations. Redding shellholders fit most single stage and turret reloading presses. Technical InformationMateri al:Steel Fits the following calibers: 25 Remington6.8mm Remington SPC30 Remington32 Remington8mm Nambu 38 Super Auto351 Winchester Self-loading357 Sig40 S&W10mm Auto
More

Model 31 357 Sig Magazines -...

$24.99
Brownells Model 31 357 Sig Magazines - Magazine Fits 31, .357 Sig, 15-Round
+ $7.95 shipping
/model-31-357-sig/-pdPZl5nwPE8rAfFOIx_4A==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Be confident your Glock pistol will perform to factory standards each and every time with genuine Glock factory magazines. Manufactured to Glock specifications in Austria by Glock. All models include round count indicator on rear face of magazine body and standard factory baseplate. Mfg: Glock SPECS: Polyethylene body over steel liner. Glock factory compatible with Gen-4 guns.
More

Model 32 357sig Magazines -...

$24.99
Brownells Model 32 357sig Magazines - Magazine Fits 32, .357 Sig, 13-Round
+ $7.95 shipping
/model-32-357sig-magazines/fR9BxAYhiKnP9RWBG18Mcw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Be confident your Glock pistol will perform to factory standards each and every time with genuine Glock factory magazines. Manufactured to Glock specifications in Austria by Glock. All models include round count indicator on rear face of magazine body and standard factory baseplate. Mfg: Glock SPECS: Polyethylene body over steel liner. Glock factory compatible with Gen-4 guns.
More

Starline Reloading Brass 357...

$21.99
MidwayUSA Starline Reloading Brass 357 Sig Box of 100 (Bulk Packaged)
+ $7.59 shipping
/starline-reloading-brass/nU3g-W63gvByMrOcbKrXoA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Starline Brass prides itself on producing the highest quality brass case available. Their brass is comprised of 70% copper and 30% zinc and is vertically drawn during the manufacturing process which results in more uniform wall thickness. Cases are annealed between each draw to ensure consistent metallurgy in all lots. Each brass case is hand inspected to guarantee the highest quality possible. Starline Brass is located in Sedalia, MO and has been in business for over 30 years. Trust Starline for your next reloads, you won't be disappointed. New, unprimed brass. This is not loaded ammunition. Bulk brass should be full-length sized, trimmed and chamfered before loading. Technical Information Caliber: 357 Sig Preparation: Due to the manufacturing process and/or shipping, case mouths may not... Less
More

Redding Extended Shellholder...

$15.79
MidwayUSA Redding Extended Shellholder #5E (357 Sig, 40 S&W, 10mm Auto)
+ $4.99 shipping
/redding-extended/I29oa5H8i6AM2-S3RcaQOw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding Extended Shellholders are required when trimming short cases under 1 1/2 O.A.L They are machined to the same tolerances as our standard shellholders except they're longer.
More

Starline Reloading Brass 357...

$109.99
MidwayUSA Starline Reloading Brass 357 Sig Nickel Plated Box of 500 (Bulk Packaged)
+ $10.79 shipping
/starline-reloading-brass/a_zOcakXLPc63nofDf95Fw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Starline Brass prides itself on producing the highest quality brass case available. Their brass is comprised of 70% copper and 30% zinc and is vertically drawn during the manufacturing process which results in more uniform wall thickness. Cases are annealed between each draw to ensure consistent metallurgy in all lots. Each brass case is hand inspected to guarantee the highest quality possible. Starline Brass is located in Sedalia, MO and has been in business for over 30 years. Trust Starline for your next reloads, you won't be disappointed. New, unprimed brass. This is not loaded ammunition. Bulk brass should be full-length sized, trimmed and chamfered before loading. Technical Information Caliber: 357 Sig Preparation: Due to the manufacturing process and/or shipping, case mouths may not... Less
More

Redding Taper Crimp Die 357...

$45.49
MidwayUSA Redding Taper Crimp Die 357 Sig
+ $4.99 shipping
/redding-taper-crimp-die/pGCghnxRq2TLwlifD-QXUw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding Taper Crimp Dies were designed for handgun cartridges which headspace on the case mouth in which conventional roll crimping is undesirable. Also available for some revolver and bottleneck rifle cartridges, for those who prefer the uniformity of a taper crimp.Technical InformationMateri al: Steel Die Type Included: Taper Crimp Die Notes: A taper crimp gently tapers tighter and tighter to hold the bullet in place. This doesn't work the case mouth as hard as the roll crimp and it doesn't affect the overall length of the cartridge.
More

Sig Sauer Target - Sig Auto...

$26.99
Groupon Sig Sauer Target - Sig Auto Reset Knockdown
Free Shipping
/sig-sauer-target-sig/MppzPUYKIT4XzcsW2poQ6g==/info
Groupon
IN_STOCK ( In stock )
Store not rated
Free Shipping
The Sig Sauer Auto-Reset Knockdown Airgun Target features an outer center mass target with yellow center knockdown target. It also features 2 inner rings that swing in or out to determine 3 levels of expertise to hit the center target. Bottom yellow knockdown target acts as the reset.
More

Redding Competition Seater...

$85.49
MidwayUSA Redding Competition Seater Die 357 Sig
+ $4.99 shipping
/redding-competition/csdznsj0xQKsdCISfiFQkQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Redding Competition Seater Die has solved the concentricity problems inherent in other seating dies of this type. Tighter manufacturing tolerances have been made possible due to the details of the patented seating stem system. The bullet guide to seating stem fit is so precise that the seating stem can actually be demonstrated to float on a column of air. The seating stem is precision ground to exactly match bullet diameter. Alignment and accuracy are enhanced by the cartridge case and bullet being completely supported and aligned in a close fitting, precision ground sleeve before bullet seating begins. The micrometer is calibrated in 0.001 increments for precise seating depth and is infinitely adjustable (without clicks). Also has a zero set feature that allows you to zero the... Less
More

Redding Dual Ring Carbide...

$131.99
MidwayUSA Redding Dual Ring Carbide 3-Die Set 357 Magnum
+ $8.39 shipping
/redding-dual-ring-carbide/yHUAxGp5UmuXqXP1EQ2vYA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
FeaturesDual carbide ringsIncreases brass lifeProduces consistent, reliable ammunition Readding Dual Ring Carbide Sizing Dies are the correct answer to the compromise that has plagued traditional carbide dies of all manufacturers since their creation. The traditional sizing ring is required to perform double duty which it can not do. It is required to size the case sufficiently to secure the bullet (with even the thinnest brass) which all do with some success. From that point however, all traditional carbide dies resize the remainder of your cases excessively. The price of this compromise is shortened case life of your overworked brass, unsightly appearance and less than ideal chamber fit which may lead to an adverse effect on accuracy.The Redding solution is unique, incorporating two... Less
More

Starline Reloading Brass 357...

$23.99
MidwayUSA Starline Reloading Brass 357 Sig Nickel Plated Box of 100 (Bulk Packaged)
+ $7.59 shipping
/starline-reloading-brass/zqBAVy_LNYyLsVU32dNddw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Starline Brass prides itself on producing the highest quality brass case available. Their brass is comprised of 70% copper and 30% zinc and is vertically drawn during the manufacturing process which results in more uniform wall thickness. Cases are annealed between each draw to ensure consistent metallurgy in all lots. Each brass case is hand inspected to guarantee the highest quality possible. Starline Brass is located in Sedalia, MO and has been in business for over 30 years. Trust Starline for your next reloads, you won't be disappointed. New, unprimed brass. This is not loaded ammunition. Bulk brass should be full-length sized, trimmed and chamfered before loading. Technical Information Caliber: 357 Sig Preparation: Due to the manufacturing process and/or shipping, case mouths may not... Less
More

A-ZOOM Action Proving Dummy...

$14.99
MidwayUSA A-ZOOM Action Proving Dummy Round, Snap Cap 357 Sig Aluminum Pack of 5
+ $4.99 shipping
/azoom-action-proving/iUz9imYiOr3J2kSZlP5J9Q==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
A-Zoom Action Prooving Dummy Snap Cap are precision machined from aluminum to exacting tolerances. They feature a hard anodized finish that provides ultra-smooth functioning and long cycling life. These are perfect for dry fire practice, training and fuction testing, and teaching safety or storing your firearms with the spring relaxed for longer spring life. Technical Information: A-Zoom Action Prooving Dummy Snap Cap Dry Fire Hit Rating: 3000+
More

Starline Reloading Brass 357...

$81.99
MidwayUSA Starline Reloading Brass 357 Magnum Box of 500 (Bulk Packaged)
+ $10.79 shipping
/starline-reloading-brass/0BVEPOqKDq9VxOlVEWYFWA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Starline Brass prides itself on producing the highest quality brass case available. Their brass is comprised of 70% copper and 30% zinc and is vertically drawn during the manufacturing process which results in more uniform wall thickness. Cases are annealed between each draw to ensure consistent metallurgy in all lots. Each brass case is hand inspected to guarantee the highest quality possible. Starline Brass is located in Sedalia, MO and has been in business for over 30 years. Trust Starline for your next reloads, you won't be disappointed. New, unprimed brass. This is not loaded ammunition. Bulk brass should be full-length sized, trimmed and chamfered before loading. Technical Information Caliber: 357 Magnum Preparation: Due to the manufacturing process and/or shipping, case mouths may... Less
More

Lee Steel 3-Die Set 357 Sig

$31.99
MidwayUSA Lee Steel 3-Die Set 357 Sig
+ $7.59 shipping
/lee-steel-3die-set-357/HWzrzrshYISThS189t7UlQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Lee Steel Die Sets have features identical to the Lee Carbide 3-Die Set except the case MUST be lubricated for sizing. Sizer Die, Powder Through Expander Die, Bullet Seater Die, Shellholder, Powder Measure, load chart and storage case included. Bullet seater die features and adjustable taper to roll crimp.
More

Galco Stow-N-Go Inside the...

$27.96
MidwayUSA Galco Stow-N-Go Inside the Waistband Holster Right Hand Sig Sauer P238 Leather Brown
Free Shipping
/galco-stowngo-inside/VITo6zH4hXSRpFzKOwkHKw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Free Shipping
Part of Galco's Concealed Carry Lite line of holsters, the Stow-N-Go offers an exceptional combination of high performance, comfort and affordability. The Stow-N-Go's open top allows a very fast draw, while the reinforced mouth allows a smooth and easy return to the holster. A sturdy injection-molded nylon clip secures the holster onto the belt. The Stow-N-Go inside the pants holster carries the handgun in a vertical orientation, with no cant or angle. It can be used strong side, crossdraw, or in front of the hip (appendix carry). Constructed of comfortable premium Center Cut Steerhide. Technical Information: Right or Left Handed: RightMaterial: LeatherColor: BrownBelt Fit: 1-3/4Muzzle Open or Closed: Open
More

Tagua Double Mag Carrier Sig...

$31.46
Groupon Tagua Double Mag Carrier Sig Arms/Beretta Brown
Free Shipping
/tagua-double-mag-carrier/11zJymShwq5rOYikUB8EoA==/info
Groupon
IN_STOCK ( In stock )
Store not rated
Free Shipping
The Tagua Double Paddle Magazine Carrier features a simple, reliable open top design for easy, trouble-free in/out access. Vertical and comfortable carry with a close to the body fit. Wrap-around design that snaps to your belt. Fits belts up to 2-1/4 wide, through belt slots. Fits most 9mm and .45 magazines.
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2016 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe148.2015.sp24.eap-30212
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe148.2015.sp24.eap-30212