Kubota Diesel 225 DC Welder / 6 kW Generator T-4 with Remote Control Delivers up to 225 amps of DC welding power in CC (constant current) or CV (constant voltage) mode This unit can be simultaneously used as welder and generator Suits SMAW, FCAW, GMAW, GTAW and ACAC welding processes Operates as a 6kW generator and 225-amp welder Low noise level-produces only 68.7 dBA Remote control allows operator to work 100 feet (30.5 meters) from the Welder Generator DC Voltage: CC: 28 V, CV: 15-28 V DC Current: CC: 225 A, CV: 225 A Current Range: 50-225 A Max Duty Cycle with Full Amps Available: 100% @200 A Welding Processes: SMAW, FCAW, GMAW, GTAW, ACAC Fuel Tank Capacity: 6.6 gallons /30 liters Fuel Consumption at Rated Load: 0.6 gph AC Power Output: 6 kW Cycle: 50/60 Hz Amperage: 50/25 A Voltage... Less

MLTDA7 Features: -A revolutionary concept in light tower design.-Can be powered by a generator, welder generator or other power source.-An approved generator.-Ballast s and light switches are protected by inside a water proof box.-Mast extends to 30 feet (9 meters) and can be rotated 360 degrees.-Item # MLTDA7.-Engine: Kubota Z482.-Fuel Tank Capacity: 30 gallons.-Run Time with 3/4 Load: 48 hour.-Ground Clearance: 6.5''.-Standard Hitch Type - 29228: 2'' Ball Adjustable.-Option al Hitch Types - 29369: 3'' Pintle.-Light Coverage: 5 to 7 acres, 2 to 2.8 hectares.-Lumens: 440000.-Lamp Termination: 4 x 3-pin QD Plug.-Tower Support Points: 4.-Wind Stability with Genset: 72 mph.-Winch Capacity: 1500 lbs.-Winch Wire Size: 0.19''. Specifications: -Kubota Z482 12.5hp Diesel Modular Light Tower with... Less

Kubota Diesel 225 DC Welder / 6 kW Generator T-4 Mounted on TRLR10W Delivers up to 225 amps of DC welding power in CC (constant current) or CV (constant voltage) mode This unit can be simultaneously used as welder and generator Suits SMAW, FCAW, GMAW, GTAW and ACAC welding processes Operates as a 6kW generator and 225-amp welder Also available in light tower configuration as model MLTSDW7 Full instrumentation including controls for both CC and CV Trailer TRLRTMP mounted DC Voltage: CC: 28 V, CV: 15-28 V DC Current: CC: 225 A, CV: 225 A Current Range: 50-225 A Max Duty Cycle with Full Amps Available: 100% @200 A Welding Processes: SMAW, FCAW, GMAW, GTAW, ACAC Fuel Tank Capacity: 6.6 gallons /30 liters Fuel Consumption at Rated Load: 0.6 gph AC Power Output: 6 kW Cycle: 50/60 Hz Voltage:... Less

DAW500SA Features: -Kubota Diesel 500 DC Welder, 3 kW Generator T-4. -CC and CV welding capability. -Electric-start, gasoline- powered. -External oil and fuel drains, and several automatic safety shutdowns. Specifications: -Item # DAW500SA. -DC Voltage: CC: 38 V, CV: 16-40 V. -DC Current: CC: 500 A, CV: 500 A. -Current Range: 40-500 A. -Max Duty Cycle with Full Amps Available: 100pct @350 A. -Welding Processes: SMAW, FCAW, GMAW, GTAW, ACAC. -Fuel Tank Capacity: 12 gallons. -Fuel Consumption at Rated Load: 1.3 gph. -AC Power Output: 3 kW. -Cycle: 50/60 Hz. -Voltage: 120V. -Amperage: 25 A. -Voltage Regulation: 7pct. -Receptacles: NEMA 5-20R 125V GFCI 20A, NEMA L5-30R 125V Twist-Lock 30A. -Overall dimensions: 53'' L x 32'' W x 36'' H. -AC / DC Simultaneous Use: Standard. -Lifting Bale:... Less

Standby Generator, Liquid-cooled Diesel, 30 Kw, 30 Kva Rating, 120/240 Voltage, 125 Amps @ 120/240v, 1 Phase, 125.0 Amps, 1 Phase, 60 Hz, Diesel Fuel, Engine Rpm 1800, Engine Size 3318 Cc, 78-11/16 Length (in.), 51-3/16 Height (in.), 36-3/16 Width (in.), Engine Brand Yanmar, Engine (cooling) Liquid, Engine (block Heater) Optional, Automatic Volts Regulation Yes, Battery Requirements (volts) 12, Battery Requirements Min. Amp Hr. 70, Battery Requirements Group 11x6.75x7.5

This mobile generator is powered by a Perkins mobile EPA-certified diesel engine. Taylor Power Systems custom-built trailer is specially designed and built for transporting Taylor Power S...

MAGNUM MLT3060 PORTABLE LIGHT TOWER Magnum Portable Light Tower Model MLT3060 Single axle trailer 30 Gallon fuel cell Qt. (4) MetalHalide 1,000 Watt Lights 30 Ft. Max Mast Convenience receptacle panel 6 kW Generator @ 60 Hz Marathon Generator / Mitsubishi Diesel Engine The Magnum MLT3060 Light Tower is just the right amount of power with the right amount of illumination. The 4 - 1000 watt light assemblies' offers complete flexibility with 360 degree rotation, steadfast in winds up to 65+ mph, sturdy outrigger stability along with five to seven acres of light on the site. Features Tough Full tubular steel frame trailer 30 foot all-steel mast 4 - 1,000 watt metal halide lights 4 point outrigger stance withstands 65+ mph winds Reliable 4-stroke diesel engine Marathon generator

ALL-POWER PORTABLE GENERATORS 6,500 Watt 10 HP Electric Start Diesel Powered Generator with Wheel Kit All-Power diesel powered generator includes a wheel kit for easy mobility where you need it. Powerful 10 HP OHV engine. Runs 8 hours at 1/2 load. 3.3 Diesel fuel capacity tank. Provides 6,500 watt peak performance with 5,000 watt rating. Features volt, amp and hour meters. Includes two 120V outlets, one 120V twist-lock outlet, one 120/240V twist-lock outlet and a 12V DC outlet @ 8.3 Amps. Durable steel framing for extra strength and protection. Maintenance free battery included. Includes 2 non-marring feet for stability. Moves easily on two 8" pneumatic wheels. EPA approved. Generator sales are final.

DLW300ESA Features: -Kubota Diesel 300 DC Welder / 10.5 kW Generator T-4. -Voltage regulation is maintained at 1.5pct. -Produces up to 300 amps as a welder, 10.5 kW as a generator. -Emits 65dBA at 23 feet (6.9 meters). -Arc force control allows the operator to fine tune DC current during low voltage welding conditions and helps prevent electrodes forms sticking during short arc length welding. -Safety shutdowns, lifting bale, and external water, oil and fuel drains. -E-mode allows you to weld at 160 amps at idle. Specifications: -Item # DLW300ESA. -DC Voltage: CC: 31 V. -DC Current: CC: 300 A. -Current Range: 35-300 A. -Max Duty Cycle with Full Amps Available: 100pct @280 A. -Welding Processes: SMAW, FCAW, GMAW, GTAW, ACAC. -Fuel Tank Capacity: 9.5 gallons / 36 liters. -Fuel Consumption... Less

Standby Generator Towable, Liquid-cooled Diesel, 30 Kw, 37 Kva Rating, Switch Able 240v (1 Phase), 208v (3 Phase), 480v (3 Phase) Voltage, 91.7 Amps @ 120/240v, 1 Phase, 1 And 3 Phase, 60 Hz, Diesel Fuel, Engine Rpm 1800, Engine Size 6600 Cc, 126 Length (in.), 86-1/2 Height (in.), 68 Width (in.), Engine Brand Yanmar, Engine (cooling) Liquid, Engine (block Heater) Optional, Automatic Volts Regulation Yes, Battery Requirements (volts) 12, Battery Requirements Min. Amp Hr. 70

DLW300ATMXF Features: -Kubota Diesel 300 DC Welder / 10.5 kW Generator T-4 Mounted on TRLRMPXF. -Voltage regulation is maintained at 1.5pct. -Emits 65dBA at 23 feet (6.9 meters). -Produces up to 300 amps as a Welder Generator. -Arc force control allows the operator to fine tune DC current during low voltage welding conditions and helps prevent electrodes forms sticking during short arc length welding. -Safety shutdowns, lifting bale, and external water, oil and fuel drains. -E-mode allows you to weld at 160 amps at idle. -Trailer TRLRMP mounted with 30 gallons fuel cell. Specifications: -Item # DLW300ATMXF. -DC Voltage: CC: 31 V. -DC Current: CC: 300 A. -Current Range: 35-300 A. -Max Duty Cycle with Full Amps Available: 100pct @280 A. -Welding Processes: SMAW, FCAW, GMAW, GTAW, ACAC... Less

Westerbeke Diesel Generator: 7.6 BTD, A truly low profile 7.6 kilowatts.... QUIET & COMPACT Operating at 1800 RPM with a tuned air intake silencer and four point vibration mounts, the 7.6 BTD runs smooth and quiet. Designed specifically for those installations where height is extremely limited, this generator has one of the smallest envelopes available in it's class. The 7.6 BTD occupies only 6.4 cubic feet of space!POWERFUL, LIGHTWEIGHT & RELIABLEThe 7.6 BTD is powered by an industrial .95 liter engine supplying a full 7.6 kilowatts while weighing only 395 pounds. A very popular generator, the 7.6 BTD continues to support the strong record of reliability Westerbeke has built supplying generators to the United States Navy and Coast Guard as well as commercial vessels and pleasure... Less

The Generac 30kW 240 Volt standby air-cooled generator produces up to 30kW of continuous power. 125 rated amps at 240 volts (single phase). Reliable Generac gas fueled engine with low-oil pressure shutdown system. Flexible fuel line connector and digital LED controller. UV/Ozone resistant hoses and 1% voltage regulation. Durable steel enclosure withstands the harshest environments. Closed coolant recovery system. Powered by natural gas or LP gas for added versatility. EPA and SCAQMD compliant. All generator sales are final. 79.00 L. 39.00 W. 43.00 H.

This mobile generator is powered by a Perkins mobile EPA-certified diesel engine. Taylor Power Systems custom-built trailer is specially designed and built for transporting Taylor Power S...

DLW330X2 This CC (Constant Current) and CV (Constant Voltage) welder delivers up to 340 amps of operation for one man, or simultaneoustwo man operation with 200 amps of output per operator. Additionally, it provides up to 10.5 kW of 120/240 volt AC power. This is the welder that gives you more spark for your arc. Low noise level produces only 66 dBA. One or Two-man operation. Independent controls and up to 200 amps for each operator or 340 amps for one operator. n E-Mode improves fuel efficiency by allowing the operator to weld with the engine at idle speed at up to 200 amps. Greatly reduces operating costs and noise levels. Arc Force Control allows the operator to fine tune DC current during low voltage welding conditions and helps prevent electrodes from sticking during short arc... Less

This mobile generator is powered by a Perkins mobile EPA-certified diesel engine. Taylor Power Systems custom-built trailer is specially designed and built for transporting Taylor Power S...

Portable Diesel Generator, Rated Watts 5000, Surge Watts 9160, Engine Brand Yanmar, 120/240 Voltage, 41.7/20.8 Amps @ 120/240v, Protected Circuit Breaker, Engine Size 276cc, Engine Alternator Brushless, 2.8 Run Time @ Full Load (hr./tank), 6.8 Run Time @ 1/2 Load (hr./tank), 85 Sound Level Db, 9.1 Engine Hp, 2.6 Fuel Tank Capacity (gal.), Electric/recoil Starter Type, Air Cleaner Type Paper, Low Oil Shut Down Yes, 29 Length (in.), 28-3/4 Width (in.), 28 Height (in.), C.a.r.b. Compliant

DAW500ATMP Features: -Kubota Diesel 500 DC Welder, 3 kW Generator T-4 Mounted on TRLRMP. -Mounted on TRLRMP. -CC and CV welding capability. -Electric-start, gasoline- powered. -External oil and fuel drains, and several automatic safety shutdowns. Specifications: -Item # DAW500ATMP. -DC Voltage: CC: 38 V, CV: 16-40 V. -DC Current: CC: 500 A, CV: 500 A. -Current Range: 40-500 A. -Max Duty Cycle with Full Amps Available: 100pct @350 A. -Welding Processes: SMAW, FCAW, GMAW, GTAW, ACAC. -Fuel Tank Capacity: 12 gallons. -Fuel Consumption at Rated Load: 1.3 gph. -AC Power Output: 3kw. -Cycle: 50/60 Hz. -Voltage: 120V. -Amperage: 25 A. -Voltage Regulation: 7pct. -Receptacles: NEMA 5-20R 125V GFCI 20A, NEMA L5-30R 125V Twist-Lock 30A. -Overall dimensions: 53'' L x 32'' W x 36'' H. -AC / DC... Less

Maintenance Kit 15-20KW Stand-By Generators. Includes UL approved Air Cleaner, Pre-Cleaner, Spark Plugs, Oil Filter, 80 oz. of 5W-30 Synthetic Oil and Oil Fill Cap. 6.00 L. 12.00 W. 14.00 H.

Winco 20kW Mobile Diesel Generator Model RP25. The RP25 is powered by Isuzu 4LE1, 2.2 liter, naturally aspirated engine. This engine meets EPA/CARB Tier 2 emissions. It features a switchable 4-postion voltage selector switch with automatic safety shutdown and safety lock out. It has a mechanical governor, fuel/water seperator, and also features an oil drain extension with valve.Features: Heavy Duty Isuzu Industrial Diesel Engine Basler DGC2020 Digital Controller with Digital Readouts Brushless Alternator Switchable 4-Position Voltage Selector Switch Full Receptacle Package and Shore Power Inlet 14-Gauge Galvanneal Steel Sound Attenuated Enclosure Durable Power Coat Paint Finish Lockable Side Doors, Front Storage Compartment and Fuel Access Door DOT Approved Trailer and Tank

Back order and will be available to ship till the middle of June 2012. Free Shipping Super Silent noise level 68 dba Introducing Powerland PDU6500 Silent Diesel Generator with electrical start. This 6500 watt (6.5 kW) portable silent diesel generator is suitable both as a stand alone backup generator and for use at project industrial sites. This highly versatile and rugged system has been designed to meet the quality and safety demands of both residential and professional applications. Features: *Electric Start wireless remote control *Digital control panel *AVR Alternator *Maintenance free 36 A battery *Balance shaft 4 points mounting system new acoustic canopy design for low noise level *Installed heavy duty wheels and handle *Low oil pressure alert and automatic shut off

Maintenance Kit for 10-12kw Stand-By Generators - Includes UL approved Air Cleaner, Pre-Cleaner, Spark Plugs, Oil Filter, 80 oz. Of 5W-30 Synthetic Oil and Oil Fill Cap. 6.00 L. 12.00 W. 14.00 H.

DLW400ATMPXF Features: -Kubota 400 DC Welder CC / CV, 14 kW Generator T-4 Mounted on TRLRMPXF. -Draws simultaneous AC power while welding. -The convenience of one-man or two man operation. -Arc force control allows the operator to fine tune DC current during low voltage welding conditions and helps prevent electrodes forms sticking during short arc length welding. -Smooth arc characteristics and more consistent, quality welds. -Super clean voltage regulation 1.5pct (+/-). -Tier 4 Kubota diesel engine V1305. -Trailer TRLRTMP mounted with 30 gallons fuel cell. -E-mode improves fuel efficiency by allowing operator to weld at idle up to 240 amps. -Noise level produces only 67.5 dBA. Specifications: -Item # DLW400ATMPXF. -DC Voltage: CC: 34, 2 x 27cc V. -DC Current: CC: 400cc, 2 x 200ccA... Less

THIS IS A BRAND NEW DIESEL GENERATOR / WELDER MAX POWER 2.5 KW AT 3600RPM ENGINE DISPLACEMENT IS .42 LITER THIS GENERATOR COMES WITH A 1 YEAR PARTS ONLY NO LABOR WARRANTY Greater Fuel-Efficiency New type fuel injection system and combustion system ensures maximum power from every drop of diesel and diminished waste gas exhaust. Low Noise and Stable Low noise composite steel constructed fan cover combines with a specially designed large exhaust muffler to form a silent machine. ChangFa's unique

500 amp Welder, 3KW, 120/240V Gen, Kubota D-1803 This CC (constant current), CV (constant voltage) welder delivers up to 500 amps of DC welding output. As a generator it provides up to 3kW of 120/240 volt AC power. Additionally, this unit can be simultaneously used as a welder and generator. CC and CV welding capability Electric-start, diesel-powered Excels in SMAW, FCAW, GMAW, GTAW and ACAC welding processes External oil and fuel drains, and several automatic safety shutdowns Kubota D-1803 engine, with 34.5-hp, drives the unit Unit Specifications DC Voltage CC: 38 V CV: 16-40 V DC Current CC: 500 A CV: 500 A Current Range 40-500 A Max Duty Cycle w/ Full Amps Availible 100% @350 A Welding Processes SMAW FCAW GMAW GTAW ACAC Fuel Tank Capacity 12 gal 0 L Fuel Consumption at Rated Load... Less

DLW400ESA Features: -Kubota 400 DC Welder CC / CV, 14 kW Generator T-4. -Draws simultaneous AC power while welding. -The convenience of one-man or two man operation. -Arc force control allows the operator to fine tune DC current during low voltage welding conditions and helps prevent electrodes forms sticking during short arc length welding. -Smooth arc characteristics and more consistent, quality welds. -Super clean voltage regulation 1.5pct (+/-). -Tier 4 Kubota diesel engine V1305. -E-mode improves fuel efficiency by allowing operator to weld at idle up to 240 amps. -Noise level produces only 67.5 dBA. Specifications: -Item # DLW400ESA. -DC Voltage: CC: 34, 2 x 27cc V. -DC Current: CC: 400cc, 2 x 200ccA. -Current Range: 70-400, 2x35-200 A. -Max Duty Cycle with Full Amps Available:... Less

DLW400ATMP Features: -Kubota 400 DC Welder CC / CV, 14 kW Generator T-4 Mounted on TRLRMP. -Draws simultaneous AC power while welding. -The convenience of one-man or two man operation. -Arc force control allows the operator to fine tune DC current during low voltage welding conditions and helps prevent electrodes forms sticking during short arc length welding. -Smooth arc characteristics and more consistent, quality welds. -Super clean voltage regulation 1.5pct (+/-). -Tier 4 Kubota diesel engine V1305. -Trailer TRLRTMP mounted. -E-mode improves fuel efficiency by allowing operator to weld at idle up to 240 amps. -Noise level produces only 67.5 dBA. Specifications: -Item # DLW400ATMP. -DC Voltage: CC: 34, 2 x 27cc V. -DC Current: CC: 400cc, 2 x 200ccA. -Current Range: 70-400, 2x35-200... Less

Call Toll Free 1-866-513-5799, Mon-Fri 8-9, Sat and Sun 10-5 EST About Us Product Details Store Policy More In Welding Soldering Tools "Multiquip" Kubota Diesel 225 DC Welder / 6 KW Generator with Remote Control OUR SKU# MTQ1074 MPN: SDW225SSWR Condition Brand New Shipping Free Shipping Leaves warehouse within 24 to 48 hours With a transit time of 3-10 business days.This item ships Truck Freight to your driveway and you will be responsible for receiving the product from the truck. Please note t

5500 Watt surge, 5000 rated, Portable Generator, Yanmar engine, electric/recoil start, 12 gallon fuel tank, 26 hours run time at 75% load, low oil shutdown, roll cage, two GFCI outlets, one 120/240 30A TL, one 120V 30A TL, voltage selector, lifting eye. Generator sales are final. 32.90 L. 23.10 W. 30.50 H.

Steam Generator CU1250 Commercial Mr. Steam steambath CU generators are high- performance, low-maintenance solutions for leading hotels, clubs and spas worldwide. Mr. Steam provides owner/operators with systems that deliver steambathers the experience they demand - every time. Meet rigid requirements and nationally recognized testing standards, including UL. Vertical construction results in small footprint for location within the tightest of mechanical rooms. Each Mr. Steam CU Commercial Steambath unit is fully wired, factory tested, ready for installation, and fully equipped with numerous standard features that enhance its quality and durability. One reason we like Mr. Steams commercial generators is their serviceability. They can be opened for cleaning the tank and elements.