Works with desktop and laptop PC equipped with an USB port. Plug the USB end into an USB port and ready to read and write that good old 1.44MB floppy disk. Easy Plug and Play Setup. Interface: USB V1.1 Compatible with USB 2.0. Powered by USB Port No Extra Power Supply Needed. Disk Type: 3.5 High Density. Data Capacity: 1.44Mb. Color: Black. USB Transfer Rate: 12Mbps (Max). Operating Temperature: 5°C to 35°C (41°F to 95°F). Humidity: 20% to 80% Non Condensing. Software Requirement:. Windows 7. Vista. Windows XP. Windows ME. Windows 2000. Windows 98SE.

Drive Color: Black. Drive Interface: 34 pin Interface. Floppy Disk Capacity: 1.44 MB. Floppy Drive Data Transfer Rate: Up to 400Kbps. Supported Flash Media: Compact Flash Type I Compact Flash Type II Compact Flash Pro II Compact Flash Extreme Compact Flash Extreme III MicroDrive Secure Digital Secure Digital High Capacity (SDHC) MultiMedia Card MultiMedia Card 4.0 (MMC +) Memory Stick Memory Stick Pro Memory Stick Duo Memory Stick Duo Pro Memory Stick MagicGate Memory Stick Duo MagicGate xD Picture Pard. Supported Windows Operating Systems: Microsoft Windows 98se ME 2000 XP Vista. Drive Bay Required: 3.5 Drive Bay. Included Software: Driver and Utilities.

Category: Case Accessories. Warranty: 30 days. Compatability: Dimension 4550 Dimension 8200 Dimension 8250 Dimension 8300 Dimension 8400 Dimension XPS Dimension XPS G2 Dimension XPS G3 OptiPlex GX150 OptiPlex GX240 OptiPlex GX260 Optiplex GX260 SMT OptiPlex GX270 OptiPlex GX400 OptiPlex GX60 Precision WorkStation 340 Precision WorkStation 350 Precision WorkStation 360 Precision WorkStation 450 Precision WorkStation 530 Precision WorkStation 650.

Connect any 3.5in floppy drive to your controller with the GO!MOD Molded Round Floppy Drive Cable from Cables To Go. The slim-line design reduces internal cable clutter for a clean professional look. This slim profile will reduce overheating by allowing more airflow inside your case. The flexibility of the floppy cable makes them easier to install than flat ribbon cables. Not to mention the added style you get with the GO! MOD Molded Round Cables! The Molded Round Floppy Drive Cable features two 34-pin drive connectors. In addition to working with 3.5in floppy drives it is designed to work with older tape back-up drives. Features: Connectors: 2 x 34-pin IDC. Connects internal floppy devices to internal controller. Designed for data transfer and floppy device control. Reduce overheating... Less

Connect any 3.5in floppy drive to your controller with the GO!MOD Molded Round Two Device Floppy Drive Cable from Cables To Go. The slim-line design reduces internal cable clutter for a clean professional look. This slim profile will reduce overheating by allowing more airflow inside your case. The flexibility of the floppy cable makes them easier to install than flat ribbon cables. Not to mention the added style you get with the GO!MOD Molded Round Cables! The Molded Round Two Device Floppy Drive Cable features three 34-pin drive connectors and is designed for drive A and drive B locations. In addition to working with 3.5in floppy drives it is designed to work with older tape back-up drives. Features: Connectors: 3 x 34-pin IDC. Connects internal floppy devices to internal controller... Less

Connect any 3.5in floppy drive to your controller with the GO!MOD Molded Round Floppy Drive Cable from Cables To Go. The slim-line design reduces internal cable clutter for a clean professional look. This slim profile will reduce overheating by allowing more airflow inside your case. The flexibility of the floppy cable makes them easier to install than flat ribbon cables. Not to mention the added style you get with the GO! MOD Molded Round Cables! The Molded Round Floppy Drive Cable features two 34-pin drive connectors. In addition to working with 3.5in floppy drives it is designed to work with older tape back-up drives. Features: Connectors: 2 x 34-pin IDC. Connects internal floppy devices to internal controller. Designed for data transfer and floppy device control. Reduce overheating... Less

Dell 3.5in Floppy Drive Blank Filler Bezel New H9002 Shipping Calculator Manufacturer Dell Part Number H9002 Description Condition NEW Availability 14 In Stock (Bin Location: W1-B1) Frequently Asked Questions Q. Is this item compatible with my part? A. Please refer to the manufacturer for compatibility information. We are unable to give compatibility recommendations. Q. Do I have to pay duties and taxes when placing an international order? A. YES! International customers will have to pay ALL du

$$ SAVE $$ We will combine with other items to save you shipping. $$ SAVE $$ Lot 100 Picture shows 1, you get 100. Condition: NEW Packaging: Bulk / OEM Floppy Drive Cable 3 connectors for up to 2 devices (can be used with 1)30" = drive connector + 12" + drive connector + 18" + motherboard connector PLEASE SAVE our STORE as a Favorite. We are building up to our full product line of over 2,000 parts. Local pick up available Powered by eBay Turbo Lister

No Driver Installation Required. 3.5-inch 720KB/1.44MB Floppy Disk Drive. USB 2.0 Interface Connector. Floppy Interface Connector. 4-pin Power Supply Connector. Supports All Popular Memory Cards:. CF I CF II. MD. SD SDHC Mini SD. MMC RS-MMC. MS MS Pro. Support:. Windows 7. Vista. Windows XP. Windows 2000. Windows ME. Windows 98SE. Mac OS V8.6 and Above.

$$ SAVE $$ We will combine with other items to save you shipping. $$ SAVE $$ Lot 100 Picture shows 1, you get 100. Condition: NEW Packaging: Bulk / OEM Floppy Drive Cable 3 connectors for up to 2 devices (can be used with 1)30" = drive connector + 12" + drive connector + 18" + motherboard connector PLEASE SAVE our STORE as a Favorite. We are building up to our full product line of over 2,000 parts. Local pick up available Powered by eBay Turbo Lister

Mukii Technology has launched a new TransImp MD -2.5 2-bay SATA HDD enclosure to meet the requirements of PC data protection and HDD copying. The TransImp MD can take two 2.5 SATA hard drives/SATA SSDs and support hot swap as well as hardware or software RAID. The standard 3.5 enclosure is applicable to the floppy disk drive bay of all chassis to save precious space. The enclosure internally features the SATA II interface which is backward compatible with SATA I; the external SATA interface supports up to 3Gb/s transfer rate. The ergonomic design enables you to easily install and remove your HDDs. The aluminum body with vents can effectively lower the HDD temperature and thus extend the life of your HDDS. The HDD read/Power LED indicators allow effective monitoring of HDD activities... Less

CRU s DataPort 25 houses up to two 2.5 low-profile IDE drives and makes them removable while only occupying a standard 3.5 floppy drive bay. This space saving drive enclosure s unique design allows striping RAID 1 Mirroring and features a dual-interface receiving frame for both IDE and SATA drives. Constructed of heavy-duty stainless steel the DataPort 25 is designed for rugged use and is ideal for applications where space is critical yet performance is essential. General. Device Type: Storage mobile rack. Hard Drive Form Factor Compatibility: 2.5 . Material: Steel. Dimensions: 4 W x 1 H x 6.1 D. Supported Interface: Serial ATA-300. Expansion/Connect ivity. Expansion Bays: 2 x internal - 2.5 x 1/8H. Interfaces: 2 x storage - Serial ATA-300 - 7 pin Serial ATA. Connections: 1 x storage -... Less

NSA-approved degaussing paddle for all hard and floppy disk mediaAML-6KG has been evaluated by the NSA and meets the requirements of NSA/CSS 9-12A-D, Degausser Evaluated Products ListConstruction: One piece aluminum containing high-energy magnetic assemblyDestroys - 3.5 / 5.25 / 8 Floppy Disks, 14 Disk Packs, Hard or Floppy Disk Magnetic Media, Hard Drives (w/platters removed), Magnetic Storage Drums, Bubble Memory Chip, Magnetic Media Ribbon1 Year Warranty (parts/labor) excluding wearblesTo use, disassemble your hard drive and wand over hard drive to completely remove all data. Most PC hard drives can be disassembled in less than 90 seconds using basic screwdriver type tools.

works with old system, Floppy Drive & Memory Card Reader combo, internal mount A TRUE Floppy Drive. Not an USB Floppy Drive 100% old system compatable Integrated both floppy drive and memory card reader in one 3.5-inch housing. Connect it to motherboard on board USB 9-pin header for card reader to work Make sure that your system (motherboard) has a floppy disk connector and cable. Also to make sure your system power supply has a floppy power connector Product Specifications: No Driver Installation Required 3.5-inch 720KB/1.44MB Floppy Disk Drive USB 2.0 Interface Connector Floppy Interface Connector 4-pin Power Supply Connector Supports All Popular Memory Cards: o CF I, CF II o MD o SD, SDHC, Mini SD o MMC, RS-MMC o MS, MS Pro Package Includes: Multifunction Floppy Disk and Memory Card... Less

10 pack Picture shows 1, you get 10 Condition: NEW Packaging: Bulk / OEM *Length varies from 20" to 30"(average is about 24") Floppy Drive Cable 5 connectors for up to 2 devices (can be used with 1) (Bigger connectors are for old 5.25" drives - They can be ignored) PLEASE SAVE our STORE as a Favorite. We are building up to our full product line of over 2,000 parts. Local pick up available Powered by eBay Turbo Lister

CRU s DataPort 25 houses up to two 2.5 low-profile IDE drives and makes them removable while only occupying a standard 3.5 floppy drive bay. This space saving drive enclosure s unique design allows striping RAID 1 Mirroring and features a dual-interface receiving frame for both IDE and SATA drives. Constructed of heavy-duty stainless steel the DataPort 25 is designed for rugged use and is ideal for applications where space is critical yet performance is essential. General. Device Type: Storage drive carrier (caddy). Hard Drive Form Factor Compatibility: 2.5 . Material: Steel. Dimensions: 3.1 W x 5.2 H x 1 D. Enclosure Color: Black. Supported Interface: ATA-133.General. Expansion/Connect ivity. Expansion Bays: 2 x internal - 2.5 . Interfaces: 2 x storage - ATA-133 - 40 pin IDC... Less

Removable Carrier Houses One or Two 2.5 Drives. Fits standard 3.5 (Floppy Drive) Bay. Heavy-duty stainless steel and die cast metal construction. Case Style: Removable Drive Case. Bays: 1 x 2.5 - 9.5 mm Height Internal. Drive Support: 1. Drive Type: 1 x Serial ATA/150. Interfaces/Ports: 1 x 7-pin Serial ATA/150 Internal. Form Factor: Internal. Dimensions: 1.02 Height x 4 Width x 6.10 Depth.

. . . . ... .... Sabrent 1.44 3.5" Floppy Drive w/ USB 2.0 All-in-One Internal Flash Card Reader Please note: you need a floppy connector on your motherboard in order to use the floppy drive. It does not connect through USB. This internal 3.5-inch Internal Floppy Drive Card Reader/Writer (CRW) device fits into 3.5 drive bay to save the desktop space, it provides an ideal solution for those who want the convenience and mobility to read and write the most popular memory cards. This 3.5-inch Int

Portability and versatility mean everything in the digital age. If you can't access your data wherever you are, you'll lose your competitive advantage. US Modular's small but durable external hard drives feature USB and FireWire ports or USB2.0 only ports to double your data management options. Safe. Dependable. Durable. And powerfully portable. You can rely on US Modular external hard drives for high-performance data security and versatility.

BYTECC Internal 3.5" Floppy Drive with Black White and Silver Face BT-145 High speed performance Dimension 145x100x25 mm Weight 405g Environment Temperature 5 C ~35 C Humidity 20% ~ 80%(No condensation) Supported Operating system Mac OS 8.6 or above Windows 98 or above (Windows 7 compatible) FDD-BY-BT-145

Removable Carrier Houses One or Two 2.5 Drives. Fits standard 3.5 (Floppy Drive) Bay. Heavy-Duty Stainless Steel Construction.

The Front Bay Bracket Adapter from StarTech.com® lets you install a 3.5in floppy drive into a 5.25in bay. It is a simple solution that lets you position a 3.5in floppy drive in a computer case as needed (without being confined to the 3.5in floppy bay determined by the case layout).This floppy drive adapter bracket features an attractive open-faced black bezel that provides a snug, secured fit for installed drives.

DETAILS: DataStor is an industry-leading provider of low-cost, high quality mass storage upgrade accessories. DataStor offers a complete line of external enclosures, internal upgrade kits for Apple and PC computers, and external drive interface kits.Whether you need to mount a 3.5" drive in a 5.25" bay, a 2.5" drive in a 3.5" bay, or you just want some added cooling capability for your hard drive, DataStor has a mounting solution that will fit your needs. Product Description: DataStor floppy disk adapter Device Type: Floppy disk adapter Enclosure Color: Black Expansion Bays: 1 x front accessible - 3.5" x 1/3H Compatible Bays: 1 x front accessible - 5.25" x 1/2H Package Type: Retail UPC: 0793161055612

NEW ASM PN: 04-333476E02 Kit-Retro-Card Slot FDD-RH Comes with what you see in the pictures. If you don't see it, you probably wont get it. Specifications are from ASM and may vary slightly due to upgrades, options, or revisions this unit may or may not have. This is new, old ASM stock. The ASM Tag Reads: Part Number: 04-333476E02 Description: KIT-RETRO-CARD SLOT FDD-RH Note on the Kit: Relocates 1 of 2 floppy disk drives from front end to a slot in the system controller. Item 000 includes the procedure. The Kit Includes: Part Number: 04-333476E, Desciption: KIT-RETRO-CARD SLOT FDD, Quantity: 1 Part Number: 45-107174A19, Desciption: DISK DRIVE- MICROFLOPPY 3.5 INCH, Quantity: 0 Part Number: 16-331812B01, Desciption: RAIL-TOP-MTG-HARD DRIVE, Quantity: 1 Part Number: 16-331811C01,... Less

Manhattan 30 inch IDC 3.5" Floppy 3-Connector Ribbon Cable for 2 Drive Connect any two 3.5in floppy drive to your controller with this floppy drive ribbon cable. The Cable features three 34-pin drive connectors. In addition to working with 3.5in floppy drives, it is designed to work with older tape back-up drives. []----------20" ----------[]-----1 0"-----[] Specifications: 3.5" 34-Pin IDC Floppy 2-Drive Cable 3x IDC 34-Pin Female Connectors Replace worn out floppy drive cables with this Cable 1 Connector for the Motherboard, 2 Connector for Floppy Drive Sturdy Nylon Construction UL Listed 28AWG Length: 30 inches CablesOnline Part Number: FF-330

Telescopes To 5.5 Feet. Boom Extends To 28 . Fast & Smooth Boom And Height Adjustments. Knob Boom Adjustment. Gloss Black Finish. Constructed With Strong Lightweight Tubing. MIC Holder Included. Dimensions: L3.5 X W3.5 X H38 . WEIGHT : 3.7 Lbs

Telescopes To 5.5 Feet. Boom Extends To 28 . Fast & Smooth Boom And Height Adjustments. Knob Boom Adjustment. Gloss Black Finish. Constructed With Strong Lightweight Tubing. MIC Holder Included. Dimensions: L3.5 X W3.5 X H38 . WEIGHT : 3.7 Lbs

This 3.5 1.44MB External USB Floppy Disk Drive is super slim and lightweight and brings more functionality and versatility to your USB equipped Macintosh or PC computer.It s powered through the USB port, so no AC adapter is needed.

High-density rack-mount servers are emerging as one of the strongest segments in the entry-level server space. Their thin design saves space and simplifies the installation operation and maintenance of co-located systems. The Intel Server Chassis SR1300 provides an ideal foundation for such systems helping businesses to meet the challenges of consolidating front-end and general-purpose servers This Intel SR1300 Server Chassis includes the North American power cord. Form Factor: Rackmount server 1U. Color: Black. Drive Bays: 1 x 3.5 bay for slim-line CD-Rom/floppy ( Not Included ) or DVD/floppy drive module ( Not Included ) or third hard drive ( Not Included ). Hot-Swappable Bays: 2 x 1 HDD SCA SCSI U320 or ATA. Included (Upgradable up to 3. SCSI only). I/O Expansion Slot: 1 Full Size and... Less

HP - 1.44 MB 3.5 INCH SLIMLINE FLOPPY DRIVE FOR PROLIANT DL380 G2 (228507-001). . IN STOCK.