Totally-Enclosed Fan-Cooled ROTOGEN (RTG-Series) cast-iron rotary models are rain- and dust-tight and rodent-proof and are ETL-Listed. All GWM Rotary Converters feature an Industry Exclusive Unconditional Lifetime Warranty against rotor failure. Economically- priced DP-Series Open, Drip-Proof cast-iron rotary models operate quietly in clean indoor applications. You may operate single or multiple motors, transformers, and resistance loads at 100% power in a broad range of applications. Phase converters will not change voltage. The single-phase input voltage is the same as the 3-phase output. Specify operating voltage when ordering: 208/230 or 440/480 volts 50/60 Hz. This is the cost-effective way to produce 3-phase metered at cheaper single-phase rates, and electrical efficiency above... Less

Phase Converter, Rotary, Input Voltage 460, Output Voltage 460, Input Phase Ac 1, 3, Input 325 Amps, 126, Largest Motor Hp 100, Depth 64 In., Width 48 In., Height 50 In., Multiple Motor Hp Range 50-300, Knockout Size 1 In., Motor Load Rating 100%, Consists Of 2- 3eea3

New 15 HP CNC Rotary Phase Converter Heavy Duty - 220-240 volt single phase power in, 220-240 volt 3 phase power out. ALL NEW!....MADE IN USA!...... NOT A KIT OR REBUILT!....100% DUTY CYCLE! Features - On/Off Switch (Other manufactures lack this feature. Without a switch a $450. (There is no push button system used to start this converter.) - Matched Load and Balanced Output. (CNC compatible voltage.) - Ready to run out of the box. (This is not a kit. Fully assembled, ready to run out of the box.) - Easy Installation. (2 boxes located on the top of the Phase Converter, One single phase power in the other 3 phase power out, allowing an easy connection to your 3 phase equipment.) - Removed Shaft and a Protective Cap on the Converter. - Super heavy duty oil run and start capacitors. - Larger... Less

Phase Converter, Rotary, Input Voltage 208-240, Output Voltage 208-240, Input Phase Ac 1, 3, Input 400 Amps, 164, Largest Motor Hp 60, Depth 62 In., Width 48 In., Height 42 In., Multiple Motor Hp Range 60-180, Knockout Size 1 In., Motor Load Rating 100%, Consists Of 2- 3edy3

Runs three-phase equipment on 63 existing 220V single-phase power For long heavy starting loads, instant reversing, momentarily overloaded motors, or imported equipment; please inquire. Voltage stabilizer available for high line voltage and voltage- sensitive equipment such as CNC's; please inquire. Runs motor loads only at 2/3 rated HP How to Size: The largest motor on your machine must fall within the minimum and maximum range of the converter. Do not order a larger unit or heavy duty model thinking it will give you more horsepower. When To Use Heavy Duty: Heavy starting loads (lathes, flywheel driven equip., etc.). Instant reversing, frequent starting, jogging. Air compressors (motor pulley must be reduced by 1/3 diameter). Heavily Loaded Equipment: Pumps, fans, blowers, direct-drive... Less

CEDARBERG Phase Converter Series IB Horse Power 1 - 3 CAT. NO 8000-102 Cedarberg Phase Converters and Rotary Phase Converters permit operation of three phase motors on single phase current. Cedarberg Rotary Phase Converters and Static Phase Converters are used where three phase current is not available and the cost to bring three phase power if prohibitive. We at Cedarberg Industries are proud of our Phase Converters and Rotary Phase Converters and stand behind these products. Correctly sized and properly installed a Cedarberg Static Phase Converter and Rotary Phase Converter should provide years of trouble free service. Cedarberg Phase Converters are designed to start motors within a specific horsepower range. Cedarberg Rotary Phase Converters are designed to start any motor from... Less

Totally-Enclosed Fan-Cooled ROTOGEN (RTG-Series) cast-iron rotary models are rain- and dust-tight and rodent-proof and are ETL-Listed. All GWM Rotary Converters feature an Industry Exclusive Unconditional Lifetime Warranty against rotor failure. Economically- priced DP-Series Open, Drip-Proof cast-iron rotary models operate quietly in clean indoor applications. You may operate single or multiple motors, transformers, and resistance loads at 100% power in a broad range of applications. Phase converters will not change voltage. The single-phase input voltage is the same as the 3-phase output. Specify operating voltage when ordering: 208/230 or 440/480 volts 50/60 Hz. This is the cost-effective way to produce 3-phase metered at cheaper single-phase rates, and electrical efficiency above... Less

Brand new Kay Phasemaster Rotary Type Phase Converter Maximum motor horsepower 20 HP, Maximum total horse power 60 HP, L 21, W 21, H 28, Wt. 487lbs, Power 1ph motors from a 3ph power supply, Other sizes are available so please call us for more information

Phase Converter, Rotary, Input Voltage 460, Output Voltage 460, Input Phase Ac 1, 3, Input 75 Amps, 27, Largest Motor Hp 20, Depth 31 In., Width 24 In., Height 21 In., Multiple Motor Hp Range 20-60, Knockout Size 1 In., Motor Load Rating 100%

Phase Converter, Rotary, Input Voltage 208-240, Output Voltage 208-240, Input Phase Ac 1, 3, Input 100 Amps, 42, Largest Motor Hp 15, Depth 31 In., Width 24 In., Height 21 In., Multiple Motor Hp Range 15-45, Knockout Size 1 In., Motor Load Rating 100%