Phase Converter, Static, Input Voltage 208-243, Output Voltage 208-243, Input Phase Ac 1, Output Phase Ac 3, Input (amps) 30, Output Amps 15.2, Output Hp 3-5, Depth (in.) 2-5/8, Width (in.) 5-1/8, Height (in.) 9-1/2, Hp Range 3 To 5, Knockout Size (in.) 1/2, Motor Load Rating 2/3

Runs three-phase equipment on 63 existing 220V single-phase power For long heavy starting loads, instant reversing, momentarily overloaded motors, or imported equipment; please inquire. Voltage stabilizer available for high line voltage and voltage- sensitive equipment such as CNC's; please inquire. Runs motor loads only at 2/3 rated HP How to Size: The largest motor on your machine must fall within the minimum and maximum range of the converter. Do not order a larger unit or heavy duty model thinking it will give you more horsepower. When To Use Heavy Duty: Heavy starting loads (lathes, flywheel driven equip., etc.). Instant reversing, frequent starting, jogging. Air compressors (motor pulley must be reduced by 1/3 diameter). Heavily Loaded Equipment: Pumps, fans, blowers, direct-drive... Less

New 15 HP CNC Rotary Phase Converter Heavy Duty - 220-240 volt single phase power in, 220-240 volt 3 phase power out. ALL NEW!....MADE IN USA!...... NOT A KIT OR REBUILT!....100% DUTY CYCLE! Features - On/Off Switch (Other manufactures lack this feature. Without a switch a $450. (There is no push button system used to start this converter.) - Matched Load and Balanced Output. (CNC compatible voltage.) - Ready to run out of the box. (This is not a kit. Fully assembled, ready to run out of the box.) - Easy Installation. (2 boxes located on the top of the Phase Converter, One single phase power in the other 3 phase power out, allowing an easy connection to your 3 phase equipment.) - Removed Shaft and a Protective Cap on the Converter. - Super heavy duty oil run and start capacitors. - Larger... Less

Commercial Duty Exhaust Fan - 48" This Exhaust Fan is ideal for light duty exhaust applications. Exhaust fan features a totally enclosed ball bearing, permanently lubricated motor that provide continuous duty. Made with 16 gauge steel venturi housing reinforced with tubular steel bracing. Belt driven motor powers steel fan blades. Features 2 ball bearing pillow block sealed bearings. Three phase design. Industrial gray enamel finish. Fully assembled. Horsepower rating based upon maximum speed/load.

New 40 HP CNC Rotary Phase Converter Heavy Duty - 220-240 volt single phase power in, 220-240 volt 3 phase power out. ALL NEW!....MADE IN USA!.... NOT A KIT OR REBUILT!....100% DUTY CYCLE! Features - On/Off Switch (Other manufactures lack this feature. Without a switch a $450. (There is no push button system used to start this converter.) - Matched Load and Balanced Output. (CNC compatible voltage.) - Ready to run out of the box. (This is not a kit. Fully assembled, ready to run out of the box.) - Easy Installation. (2 boxes located on the top of the Phase Converter, One single phase power in the other 3 phase power out, allowing an easy connection to your 3 phase equipment.) - Removed Shaft and a Protective Cap on the Converter. - Made in USA. - High amperage high quality contactors -... Less

C Series® High Performance Commercial Bronze Pumps For commercial and high-end residential swimming pools and other water applications. Available in flows to 740 GPM, and from 5 to 20 HP.The C Series is a heavy-duty commercial pump specifically designed for large pools, fountains and water attractions that demand high flow rates and continuous operation. With bronze construction and a stainless steel strainer basket, the C Series is perfect for the toughest indoor or outdoor projects. This pump’s lasting efficiency, quiet operation, easy maintenance, and durability has set the standard for mediumand high-head performance in the pool industry for many years.Available with and without a hair and lint strainer. Standard Features All bronze construction for strength and durability. Close... Less

Totally-Enclosed Fan-Cooled ROTOGEN (RTG-Series) cast-iron rotary models are rain- and dust-tight and rodent-proof and are ETL-Listed. All GWM Rotary Converters feature an Industry Exclusive Unconditional Lifetime Warranty against rotor failure. Economically- priced DP-Series Open, Drip-Proof cast-iron rotary models operate quietly in clean indoor applications. You may operate single or multiple motors, transformers, and resistance loads at 100% power in a broad range of applications. Phase converters will not change voltage. The single-phase input voltage is the same as the 3-phase output. Specify operating voltage when ordering: 208/230 or 440/480 volts 50/60 Hz. This is the cost-effective way to produce 3-phase metered at cheaper single-phase rates, and electrical efficiency above... Less

New 25 HP Rotary Phase Converter Heavy Duty - 220-240 volt single phase power in, 220-240 volt 3 phase power out. ALL NEW!....MADE IN USA!.... NOT A KIT OR REBUILT!....100% DUTY CYCLE! Features - On/Off Switch (Other manufactures lack this feature. Without a switch a $450. oo Mag starter would be required.) - Our Switch CONTROLS A CONTACTOR TO HANDLE THE POWER FOR THE CONVERTER. ITS LIKE A BUILT IN MAG STARTER! THIS MEANS A SAVINGS TO YOU, NO MOTOR STARTER TO BUY. - Auto Starting Unit. (There is no push button system used to start this converter.) - Matched Load and Balanced Output. (for all non CNC equipment.) - Ready to run out of the box. (This is not a kit. Fully assembled, ready to run out of the box.) - Easy Installation. (2 boxes located on the top of the Phase Converter, One... Less

Anderson Converters New 30 HP Rotary Phase Converter Panel Build your own Rotary Converter ALL YOU NEED IS OUR PANEL AND A 30 HP 3 PHASE 240 VOLT 1700-1800 RPM MOTOR!!!! ALL NEW!!!....MADE IN USA!!!.... NOT AN IMPORT!!!.....IN STOCK READY FOR SAME DAY SHIPPING Features - On/Off Switch (Other manufactures lack this feature. Without a switch a $250.oo Mag starter would be required to start the converter.) - Idler motor customer supplied (For this panel you need a 30 HP 230-460 volt 3 phase 170

C Series® High Performance Commercial Bronze Pumps For commercial and high-end residential swimming pools and other water applications. Available in flows to 740 GPM, and from 5 to 20 HP.The C Series is a heavy-duty commercial pump specifically designed for large pools, fountains and water attractions that demand high flow rates and continuous operation. With bronze construction and a stainless steel strainer basket, the C Series is perfect for the toughest indoor or outdoor projects. This pump’s lasting efficiency, quiet operation, easy maintenance, and durability has set the standard for mediumand high-head performance in the pool industry for many years.Available with and without a hair and lint strainer. Standard Features All bronze construction for strength and durability. Close... Less

Totally-Enclosed Fan-Cooled ROTOGEN (RTG-Series) cast-iron rotary models are rain- and dust-tight and rodent-proof and are ETL-Listed. All GWM Rotary Converters feature an Industry Exclusive Unconditional Lifetime Warranty against rotor failure. Economically- priced DP-Series Open, Drip-Proof cast-iron rotary models operate quietly in clean indoor applications. You may operate single or multiple motors, transformers, and resistance loads at 100% power in a broad range of applications. Phase converters will not change voltage. The single-phase input voltage is the same as the 3-phase output. Specify operating voltage when ordering: 208/230 or 440/480 volts 50/60 Hz. This is the cost-effective way to produce 3-phase metered at cheaper single-phase rates, and electrical efficiency above... Less

Our three-phase, 208-230/460 Volt, ODP and TEFC motors are ideally suited for use on conveyors, machine tools, door operators, speed reducers, cranes and other industrial machinery requiring quick stop and/or holding torque. They feature Stearns 56,000 and 87,000 series brakes and either a drive-end C-Face or non C-Face endshield. Brakes are fail-safe and are spring set type. Load is stopped automatically when power is removed and they feature a power off manual release for convenience or in case of a power failure. , NEMA Design B performance, premium Class F insulation, durable steel frame construction, UL recognized component listing and CSA certification. Made in U.S.A.

Cast iron, two stage pump for long life ASME tank certified for 200 PSI maximum pressure Industrial-duty NEMA motor for reliable service Mounted and wired motor starter for quick electrical mockup Fully enclosed metal belt guard assures safe operation Square feet per carton: 89.21 Specifications: Engine: 15 HP Max pressure: 175psi SCFM @ 90psi: 52.4. @ 175psi: 50 Volts, phase: 208-230/460, 3phase Amp draw: 43-41.4/20.7 Tank capacity: 120 Gallon horizontal Dimensions: 62" H x 77" W x 30" D

Our three-phase, 208-230/460 Volt, ODP and TEFC motors are ideally suited for use on conveyors, machine tools, door operators, speed reducers, cranes and other industrial machinery requiring quick stop and/or holding torque. They feature Stearns 56,000 and 87,000 series brakes and either a drive-end C-Face or non C-Face endshield. Brakes are fail-safe and are spring set type. Load is stopped automatically when power is removed and they feature a power off manual release for convenience or in case of a power failure. , NEMA Design B performance, premium Class F insulation, durable steel frame construction, UL recognized component listing and CSA certification. Made in U.S.A.

Phase Converter, Rotary, Input Voltage 208-240, Output Voltage 208-240, Input Phase Ac 1, 3, Input 30 Amps, 13.9, Largest Motor Hp 5, Depth 19 In., Width 12 In., Height 13 In., Multiple Motor Hp Range 5-15, Knockout Size 1 In., Motor Load Rating 100%

Our three-phase, 208-230/460 Volt, ODP and TEFC motors are ideally suited for use on conveyors, machine tools, door operators, speed reducers, cranes and other industrial machinery requiring quick stop and/or holding torque. They feature Stearns 56,000 and 87,000 series brakes and either a drive-end C-Face or non C-Face endshield. Brakes are fail-safe and are spring set type. Load is stopped automatically when power is removed and they feature a power off manual release for convenience or in case of a power failure. , NEMA Design B performance, premium Class F insulation, durable steel frame construction, UL recognized component listing and CSA certification. Made in U.S.A.

Phase Converter, Static, Input Voltage 208-241, Output Voltage 208-241, Input Phase Ac 1, Output Phase Ac 3, Input (amps) 15, Output Amps 5.2, Output Hp 3/4-1.5, Depth (in.) 2-5/8, Width (in.) 5-1/8, Height (in.) 9-1/2, Hp Range 3/4 To 1-1/2, Knockout Size (in.) 1/2, Motor Load Rating 2/3

160636 Blade size: 20", Power: 5 HP 208 / 230V 3 Phase Features: -Wet Cutting Block Saws MK-5005S, MK-5005T.-Precisio n screw feed mechanism allows the cutting head to be easily raised or lowered to the precise cutting depth required.-Conveyor cart built from heavy-duty cast aluminum.-3 phase saws are equipped with GE NEMA 1 starters in NEMA 12 enclosure.-Adjusta ble water supply for maximum blade protection.-Built- in tie-downs for safer saw transport.-Ergonom ically designed handle for reduced operator fatigue.-Spherical rod ends are used to maintain proper cutting head alignment.-Gas saw engine attachment is via four vibration isolation mounts.-Gas saws come with belt driven, self-priming centrifugal water pumps that can be disengaged for dry cutting.-Heavy-dut y built-in forklift... Less

Runs three-phase equipment on 63 existing 220V single-phase power For long heavy starting loads, instant reversing, momentarily overloaded motors, or imported equipment; please inquire. Voltage stabilizer available for high line voltage and voltage- sensitive equipment such as CNC's; please inquire. Runs motor loads only at 2/3 rated HP How to Size: The largest motor on your machine must fall within the minimum and maximum range of the converter. Do not order a larger unit or heavy duty model thinking it will give you more horsepower. When To Use Heavy Duty: Heavy starting loads (lathes, flywheel driven equip., etc.). Instant reversing, frequent starting, jogging. Air compressors (motor pulley must be reduced by 1/3 diameter). Heavily Loaded Equipment: Pumps, fans, blowers, direct-drive... Less

The Salvajor model 75 is a 3/4 hp commercial garbage disposer that's suitable for use in a variety of situations, such as vegetable prep, salad prep, or pot sink areas in a food service business that serves up to 100 persons per meal. This 3/4 hp commercial disposer features a totally enclosed, water-cooled motor that's designed for maximum efficiency and long life. It's protected from thermal overload by a manual reset. The Salvajor model 75 features an 8" diameter, hardened carbide alloy shredder, coupled with an 8" diameter carbide alloy rotor with two cutter bars for maximum performance. A rubber adapter above the grind chamber and a rubber drain outlet isolates sound and eliminates excess vibration for quieter operation. This 3/4 hp Salvajor 75 commercial disposer is... Less

US Motors Brake, 1 HP, 3-Phase, 1150 RPM Motor Definite PurposeTotally Enclosed Fan Cooled (TEFC) MotorFCR SeriesBrakemotorF ooted US Motor Dimensions /> US Motor Wiring Diagrams /> US Motor Catalog Pagediv

Delta 50-764 5 HP 3 Phase Dust Collector Condition: New Product Description Description: Features: * Standard 1 micron filtration bags keep your shop safer and cleaner * Powerful TEFC induction motor for long-lasting, smooth performance with protection from damaging dust. The dust ports and motor housing can be oriented facing up or down. * Snap-in bag rings are faster, easier and eliminate the need for cam-over-lock style clamps * 6 mil plastic chip collection bags show you when the bags need emptying * Sturdy steel base with four easy-gliding wheels for moving from machine to machine or for storing out of the way Specifications: * Motor: 5 HP, 3,450 RPM, 230/460 V (Wired 230V), 3 Phase, 60 Hz * Max CFM: 4,800 CFM * Max Static Pressure: 10.5 (Inches of Water) * Impeller Diameter:... Less

YOU ARE BIDDING ON A FUME SMOKE EXHAUSTER , 3 PHASE , 1 1/2 HP , 208-230/460 VOLT , 60 HZ , 4.0 AMP , MAX CFM AT 0 S.P 1100 , MAX FPM AT S.P 6900 , MAX STATIC PRESSURE ( IN )5.6 , OUTLET HOSE I.D 6" , INLET HOSE ID 5" , MAX FUM TEMP 180 F DEGREE , dBA AT 5 FEET 84 UNIT IS NEW , MISSING CALMPS , SOME SCRATCHES MODEL # 3AA23 MFR : DAYTON LOCATION : W1IL11/2MIDD

Pentair EQ Commercial Series 5HP 3 Phase Pump. Commercial Plastic pump built specifically for commercial and large residential pools. Pump features extraordinary electrical and hydraulic efficiency that pays premiums in low electrical costs, less wear and tear on critical moving parts, and quiet operation.

Runs three-phase equipment on 63 existing 220V single-phase power For long heavy starting loads, instant reversing, momentarily overloaded motors, or imported equipment; please inquire. Voltage stabilizer available for high line voltage and voltage- sensitive equipment such as CNC's; please inquire. Runs motor loads only at 2/3 rated HP How to Size: The largest motor on your machine must fall within the minimum and maximum range of the converter. Do not order a larger unit or heavy duty model thinking it will give you more horsepower. When To Use Heavy Duty: Heavy starting loads (lathes, flywheel driven equip., etc.). Instant reversing, frequent starting, jogging. Air compressors (motor pulley must be reduced by 1/3 diameter). Heavily Loaded Equipment: Pumps, fans, blowers, direct-drive... Less

Commercial Duty Exhaust Fan - 30" This Exhaust Fan is ideal for light duty exhaust applications. Exhaust fan features a totally enclosed ball bearing, permanently lubricated motor that provide continuous duty. Made with 16 gauge steel venturi housing reinforced with tubular steel bracing. Belt driven motor powers steel fan blades. Features 2 ball bearing pillow block sealed bearings. Single phase design. Industrial gray enamel finish. Fully assembled. Horsepower rating based upon maximum speed/load.

Phase Converter, Rotary, Input Voltage 208-240, Output Voltage 208-240, Input Phase Ac 1, 3, Input 500 Amps, 204, Largest Motor Hp 80, Depth 64 In., Width 48 In., Height 50 In., Multiple Motor Hp Range 80-240, Knockout Size 1 In., Motor Load Rating 100%, Consists Of 2- 3edy5

C Series® High Performance Commercial Bronze Pumps For commercial and high-end residential swimming pools and other water applications. Available in flows to 740 GPM, and from 5 to 20 HP.The C Series is a heavy-duty commercial pump specifically designed for large pools, fountains and water attractions that demand high flow rates and continuous operation. With bronze construction and a stainless steel strainer basket, the C Series is perfect for the toughest indoor or outdoor projects. This pump’s lasting efficiency, quiet operation, easy maintenance, and durability has set the standard for mediumand high-head performance in the pool industry for many years.Available with and without a hair and lint strainer. Standard Features All bronze construction for strength and durability. Close... Less

Manual Starting Switch This Manual Starting Switch is for use with all Three Phase 5 HP High Stand Man Coolers. Plastic construction. Note: This is a factory installed option and MUST be purchased on same order as matching fan.

Runs three-phase equipment on 63 existing 220V single-phase power For long heavy starting loads, instant reversing, momentarily overloaded motors, or imported equipment; please inquire. Voltage stabilizer available for high line voltage and voltage- sensitive equipment such as CNC's; please inquire. Runs motor loads only at 2/3 rated HP How to Size: The largest motor on your machine must fall within the minimum and maximum range of the converter. Do not order a larger unit or heavy duty model thinking it will give you more horsepower. When To Use Heavy Duty: Heavy starting loads (lathes, flywheel driven equip., etc.). Instant reversing, frequent starting, jogging. Air compressors (motor pulley must be reduced by 1/3 diameter). Heavily Loaded Equipment: Pumps, fans, blowers, direct-drive... Less