The CR6240 series, power transducers are designed to provide a controlled output that is proportional to the average power. These devices are specifically targeted to provide an efficient solution to most power sensing needs. Units are designed for operation in systems with sinusoidal voltage and current wave forms. MTBF: greater than 100 K hours. Frequency range: 20 - 5 K Hz. Power source: 12 VDC. Output load: 0 To 300 Ω. Operating temperature: 0 degree C to +50 degree C. Thermal drift: 500 PPM/ degree C. Basic accuracy: 0.5 percent. Insulation voltage: 2500 VDC. Response time: 250 ms. Installation category: cat II. Polution degree: 2. Altitude: 2000 meter max. Cleaning: water-dampened cloth. Relative humidity: 80 percent for temperatures up to 31 degree C and decreasing linearly to 50... Less

AC Electric Motor 3 HP 3 Phase NEW For CNC Machine Hydraulic Pump 2.2kw, 4 Poles, 220 / 380V, 3 Phase 60 / 50Hz, 9.0 / 5.2 Amps, 1720 / 1420 Rpm Motor Shaft ID 0.750" Buyer responsible for shipping freight charge, Please contact for shipping quote, freight charge will vary by location. Question please E-mail ahnv@avtechmachin e.com SK831802

The CR4560 series, true RMS voltage transducers and transmitters are designed for applications where AC voltage waveforms are not purely sinusoidal. More precise and accurate than other devices, these units are ideal in chopped wave and phase fired control systems. Operating temperature: 0 degree C to +50 degree C. Basic accuracy: 0.5 percent. Thermal drift: 500 PPM/ degree C. MTBF: greater than 100 K hours. Response time: 250 ms. Insulation voltage: 2500 VDC. Supply voltage: 24 VDC. Output load: 4-20 mA DC - 0 - 300 ohm Output. Frequency range: 20-5 KHz. Calibration: true RMS sensing. Installation category: CAT II. Polution degree: 2. Altitude: 2000 meter max. Cleaning: Water-dampened cloth. Relative humidity: 80 percent for temperatures up to 31 degree C and decreasing linearly to 50... Less

PDU3VN3L2120LV Monitored 3 phase 208V Zero U vertical rack PDU supports 5.7kW total output capacity. Includes 3 ft. / .9m input cord with NEMA L21-20P 20A (3P+N+E) 208V 3 phase input plug and 36 120V outlets arranged in 3 single phase output load banks. Each output loading bank contains 12 NEMA 5-15/20R outlets. Visual meter with scroll button and PowerAlert remote monitoring interface enables real-time current monitoring for each output phase. Supports 0U vertical rackmount installation with included mounting accessories. Toolless button-mount installation supported in compatible racks. Included cord retention brackets keep vital network equipment plugged in and continuously powered. Tripp Lite 3 phase Monitored PDU / Power Distribution Unit offers real-time remote monitoring of voltage... Less

220 Volt AC 3 Phase 2 HP Gear Head 8 Speed Drilling and Tapping Machine New DESCRIPTION / SPECS: For drilling and tapping operations Power feed to spindle Built in drill ejector 220 Volts AC 3 Phase 2 Horsepower Distance from center of drill spindle to column: 12" Max distance from spindle nose to table: 32-1/2" Max distance from spindle nose to baseplate: 47" Table size: 20 x 16" Working surface of baseplate: 16 x 16-1/2" Quill movement: 6-5/8" Spindle bore: 4MT Max drilling capacity in steel:

NON REVERSING; 1.1 KW AT 220 V 3 PHASE, 2.2 KW AT 380/415/440 V 3 PHASE, 4 KW AT 500/550 V 3 PHASE, 1.5 KW AT 660 V 3 PHASE, 1/4 HP AT 115 V 1 PHASE, 1/2 HP AT 230 V 1 PHASE, 1-1/2 HP AT 208/240 V 3 PHASE, 3 HP AT 480 V 3 PHASE, 5 HP AT 600 V 3 PHASE; 7 AMPERE (UL), 20 AMPERE (IEC THERMAL CURRENT); 1/3 PHASE; COIL VOLTAGE 110 VAC AT 50 HZ, 120 VAC AT 60 HZ; SIZE IEC A; OPEN, DIN RAIL MOUNT ENCLOSURE; OVERLOADS BIMETALLIC AMBIENT TEMPERATURE COMPENSATED 1NO-1NC AUTOMATIC/MANUAL RESET CLASS 10/20; IEC CONSTRUCTION STANDARD; AE16 MODEL; APPROVAL UL, CSA; NUMBER OF POLE 3

Power Clamp Meter, True Power (w) 600kw, Apparent Power (va) 600kva, Power Factor Yes, Amps Ac 1000a, Current Capability 1000a, Kit Current Capability 1000a, Voltage (ac) 600v, Voltage (dc) 600v, Voltage Accuracy 1 Percent, Crest Factor 1.42, Calibration Frequency (hz) 60hz, Resistance (ohms) 100m, Jaw Opening (in.) 1.6, Current Accuracy 2 Percent, True Rms Yes, Display Dual Lcd, Counts 9,999, Phase -60 To +60, Safety Rating Cat Iii-600v, Special Features Microna Current

AC Electrical Motor 2 HP 3 Phase NEW For CNC Machine Hydraulic Pump 4 Poles, 220 / 380V, 3 Phase 60Hz, 6.6 / 3.8Amps, 1720Rpm ID 0.5"

NON REVERSING; 4 KW AT 220 V 3 PHASE, 7.5 KW AT 380/415/440 V 3 PHASE, 11 KW AT 500/550 V 3 PHASE, 5.5 KW AT 660 V 3 PHASE, 1 HP AT 115 V 1 PHASE, 3 HP AT 230 V 1 PHASE, 5 HP AT 208/240 V 3 PHASE, 10 HP AT 480 V 3 PHASE, 15 HP AT 600 V 3 PHASE; 18 AMPERE (UL), 32 AMPERE (IEC THERMAL CURRENT); 1/3 PHASE; COIL VOLTAGE 110 VAC AT 50 HZ, 120 VAC AT 60 HZ; SIZE IEC D; OPEN, DIN RAIL MOUNT ENCLOSURE; OVERLOADS BIMETALLIC AMBIENT TEMPERATURE COMPENSATED 1NO-1NC AUTOMATIC/MANUAL RESET CLASS 10/20; IEC CONSTRUCTION STANDARD; AE16 MODEL; APPROVAL UL, CSA; NUMBER OF POLE 3

PDU3VN10G60 Monitored 3 phase 208V Zero U vertical rack PDU supports 12.6kW total output capacity. Includes 10 ft. / 3m input cord with IEC-309 Blue 60A (3P+E) 3 phase input plug and 36 208V outlets arranged in 3 individually breakered single phase output load banks. Each output loading bank contains 12 outlets (10 C13 and 2 C19). Visual meter with scroll button and PowerAlert remote monitoring interface enables real-time current monitoring for each output phase. Supports 0U vertical rackmount installation with included mounting accessories. Toolless button-mount installation supported in compatible racks. Included cord retention brackets keep vital network equipment plugged in and continuously powered. Tripp Lite 3 phase Monitored PDU / Power Distribution Unit offers real-time remote... Less

In-line series (AC) surge suppressor and is designed to stop surges from getting to the PLC ??? (Mother Board/Computer Board). The 120BCP20M has a maximum current draw of 15-20 amps and provides both common and normal three-phase noise filtration. Meets UL listed 1449 2nd Edition requirements and is rated 400V peak (Actual 336 volt peak) for L-N, L-G, N-G.

This is a brand new DT-3353 industrial clamp meter. This top-of-the-line clamp meter is loaded with AC power measuring functions. DT-3353 does not only measure AC current up to 1000Amp, but also measure AC power up to 750KW. DT-3353 works for both single phase and 3-phase systems. The measuring functions include true power, apparent power, reactive power, power factor, phase angle, frequency and energy. Its diversified measuring functions make this meter the best choice for serious electrical technicians.This meter is CAT III 1000V and CAT IV 600V rated. This device is compact and portable. It comes with batteries pre-installed. A heavy duty carrying pouch is included to protect your device when working in the field.*** Warning: This device is to be used by the certified technician only... Less

The Rane AC 23S Active Crossover can be configured as Stereo 2- or 3-Way, or Mono 4- or 5-Way. The AC 23B uses XLR connectors with active balanced Inputs and Outputs. These crossovers employ 4th-order Linkwitz-Riley filter alignments to minimize phase difficulties in the critical crossover region. Simply put, a Linkwitz-Riley alignment is two cascaded 2nd-order Butterworth filters exhibiting identical phase characteristics on their Low-pass and High-pass outputs. This characteristic guarantees in-phase outputs at all frequencies. In-phase outputs are mandatory for proper acoustic summing of common signals from adjacent drivers in the crossover region. An added benefit of this topology is steep 24 dB per octave rolloff slopes. A slope of this magnitude guarantees drivers designed to... Less

NEW ADVANTAGE ENGINEERING PUMP AND WEG 3 PHASE AC MOTOR You are purchasing a Advantage Pump and Weg Motor. Model: This Pump and Motor are New and fully guaranteed. Motor Pump 111 Stainless Fitted 5.25 X 3.25 Square Flange EPDM-CARBCM Seal 4.50 IMP DIAMETER 3/4 HP ODP 3500 RPM Motor 3 Phase 0.75/0.55 KW 208-230/460 Voltage 2.4/1.2 Amp Rating 3455 RPM B56J Frame

AC Electrical Motor 1 HP 3 Phase NEW For CNC Machine Hydraulic Pump 0.75kw, 4 Poles, 220 /380V 3 Phase 60Hz, 3.3/1.9 Amps, 1720 Rpm Buyer responsible for shipping freight charge, Please contact for shipping quote, freight charge will vary by location. Question please E-mail ahnv@avtechmachin e.com SK832605 (SML20)

Hybrid Ac Drive, Drive Type Adjustable Frequency, Constant And Variable Torque, Max. Hp 3, Max. Output Amps 9.0, 208/230 Voltage, 230 Voltage Output, Input Phase Ac 1, Output Phase Ac 3, Starting Torque (percent) 200, Torque @ 1 Hz (percent) 100, Frequency Setting (hertz) 50/60, Output Frequency (hertz) 0 To 60/120, Acceleration Adjust (sec.) 0.3 To 20, Deceleration Adjust (sec.) 0.3 To 20, Injection Braking, Nema-4x / Ip65 Enclosure, Height (in.) 9.80, Width (in.) 7.55, Depth (in.) 7.25

NON REVERSING; 1.5 KW AT 220 V 3 PHASE, 4 KW AT 380/415/440 V 3 PHASE, 5.5 KW AT 500/550 V 3 PHASE, 2.2 KW AT 660 V 3 PHASE, 1/2 HP AT 115 V 1 PHASE, 1 HP AT 230 V 1 PHASE, 2 HP AT 208/240 V 3 PHASE, 5 HP AT 480 V 3 PHASE, 7-1/2 HP AT 600 V 3 PHASE; 10 AMPERE (UL), 20 AMPERE (IEC THERMAL CURRENT); 1/3 PHASE; COIL VOLTAGE 110 VAC AT 50 HZ, 120 VAC AT 60 HZ; SIZE IEC B; OPEN, DIN RAIL MOUNT ENCLOSURE; OVERLOADS BIMETALLIC AMBIENT TEMPERATURE COMPENSATED 1NO-1NC AUTOMATIC/MANUAL RESET CLASS 10/20; IEC CONSTRUCTION STANDARD; AE16 MODEL; APPROVAL UL, CSA; NUMBER OF POLE 3

The SNAP-AIPM-3 analog input module helps you measure and control power usage in your facility. The SNAP-AIPM-3 simultaneously measures volts AC RMS and amps AC RMS for each of the three phases, using current transformers (CTs) with a 1-5 amp secondary. The module calculates true power and volt-amps for each phase and, in addition, calculates true power sums for all three phases. Part of the SNAP PAC System, the module mounts on a SNAP PAC rack with a SNAP PAC brain or rack-mounted controller. Analog, digital, and serial I/O modules can all be on the same rack. Such an I/O unit is also well suited for PC-based control or for use as intelligent remote I/O for an Allen-Bradley RSLogix PLC system, such as ControlLogix, MicroLogix, or CompactLogix. When these modules are used as part of a... Less

NON REVERSING; 7.5 KW AT 220 V 3 PHASE, 15 KW AT 380/415/440 V 3 PHASE, 18.5 KW AT 500/550 V 3 PHASE, 10 KW AT 660 V 3 PHASE, 2 HP AT 115 V 1 PHASE, 5 HP AT 230 V 1 PHASE, 7-1/2 HP AT 208 V 3 PHASE, 10 HP AT 240 V 3 PHASE, 20 HP AT 480 V 3 PHASE, 25 HP AT 600 V 3 PHASE; 32 AMPERE (UL/IEC THERMAL CURRENT); 1/3 PHASE; COIL VOLTAGE 110 VAC AT 50 HZ, 120 VAC AT 60 HZ; SIZE IEC F; OPEN, DIN RAIL MOUNT ENCLOSURE; OVERLOADS BIMETALLIC AMBIENT TEMPERATURE COMPENSATED 1NO-1NC AUTOMATIC/MANUAL RESET CLASS 10/20; IEC CONSTRUCTION STANDARD; AE16 MODEL; APPROVAL UL, CSA; NUMBER OF POLE 3

DAYTON AC GEARMOTOR MODEL 4Z392B NEW OLD STOCK - NEW IN THE BOX, REMAINING SHOP INVENTORY PHOTOS ARE OF ACTUAL ITEM ONLY 1 AVAILABLE AC Gearmotor Type Parallel Shaft Voltage Rating 208-230/460 Phase 3 Hz 60 Shaft Orientation Parallel Nameplate RPM 89 Full Load Torque (In.-Lbs.) 327 Overhung Load (Lb.) 325 Input HP 1/2 Gear Ratio 19:1 Full Load Amps 1.79/0.89 Enclosure TEFC Thermal Protection None Ambient (C) 40 Rotation Rev. Mounting All Position Length Less Shaft (In.) 12-5/16 Shaft Dimensions (In.) 3/4 x 1 1/2 Brake 2LYV2 Bearings Heavy Duty Ball, Needle Roller and Thrust Balls on Case, Ball on Motor Lubrication Permanent Heavy Duty Gear Oil Gear Case Die Cast Aluminum

NON REVERSING; 5.5 KW AT 220 V 3 PHASE, 11 KW AT 380/415/440 V 3 PHASE, 15 KW AT 500/550 V 3 PHASE, 7.5 KW AT 660 V 3 PHASE, 2 HP AT 115 V 1 PHASE, 3 HP AT 230 V 1 PHASE, 5 HP AT 208 V 3 PHASE, 7-1/2 HP AT 240 V 3 PHASE, 15 HP AT 480 V 3 PHASE, 20 HP AT 600 V 3 PHASE; 25 AMPERE (UL), 32 AMPERE (IEC THERMAL CURRENT); 1/3 PHASE; COIL VOLTAGE 110 VAC AT 50 HZ, 120 VAC AT 60 HZ; SIZE IEC E; OPEN, DIN RAIL MOUNT ENCLOSURE; OVERLOADS BIMETALLIC AMBIENT TEMPERATURE COMPENSATED 1NO-1NC AUTOMATIC/MANUAL RESET CLASS 10/20; IEC CONSTRUCTION STANDARD; AE16 MODEL; APPROVAL UL, CSA; NUMBER OF POLE 3

Shop Search 3 ton Goodman Commercial AC Condenser 208-230 3 phase R-22 Dry Click here to view full size. Full Size Image Click to close full size. Item Description Help Line: 1-866-963-4756 Call For Questions Model:GSC130363 BTU: COOLANT: PHASE: SEER/EER: HSPF: TON: Product Specifications Submittal Form Product Warranty Installation Manual Parts Manual * Complete warranty details available from your local dealer or by clicking on the link above. 3 ton Goodman Commercial AC Condenser 208-230 3 p

NON REVERSING; 2.2 KW AT 220 V 3 PHASE, 5.5 KW AT 380/415/440 V 3 PHASE, 7.5 KW AT 500/550 V 3 PHASE, 4 KW AT 660 V 3 PHASE, 1/2 HP AT 115 V 1 PHASE, 2 HP AT 230 V 1 PHASE, 3 HP AT 208/240 V 3 PHASE, 7-1/2 HP AT 480 V 3 PHASE, 10 HP AT 600 V 3 PHASE; 12 AMPERE (UL), 20 AMPERE (IEC THERMAL CURRENT); 1/3 PHASE; COIL VOLTAGE 110 VAC AT 50 HZ, 120 VAC AT 60 HZ; SIZE IEC C; OPEN, DIN RAIL MOUNT ENCLOSURE; OVERLOADS BIMETALLIC AMBIENT TEMPERATURE COMPENSATED 1NO-1NC AUTOMATIC/MANUAL RESET CLASS 10/20; IEC CONSTRUCTION STANDARD; AE16 MODEL; APPROVAL UL, CSA; NUMBER OF POLE 3

Shop Search 7.5 ton Goodman Commercial AC Condenser 208-230 3 phase R-22 Dry Click here to view full size. Full Size Image Click to close full size. Item Description Help Line: 1-866-963-4756 Call For Questions Model:GSC100903 BTU: COOLANT: PHASE: SEER/EER: HSPF: TON: Product Specifications Submittal Form Product Warranty Installation Manual Parts Manual * Complete warranty details available from your local dealer or by clicking on the link above. 7.5 ton Goodman Commercial AC Condenser 208-230

Shop Search 5 ton Goodman Commercial AC Condenser 208-230 3 phase R-22 Dry Click here to view full size. Full Size Image Click to close full size. Item Description Help Line: 1-866-963-4756 Call For Questions Model:GSC130603 BTU: COOLANT: PHASE: SEER/EER: HSPF: TON: Product Specifications Submittal Form Product Warranty Installation Manual Parts Manual * Complete warranty details available from your local dealer or by clicking on the link above. 5 ton Goodman Commercial AC Condenser 208-230 3 p

Tripp Lite's SU20K3/3XR5 20kVA SmartOnline 3-Phase Intelligent, True On-Line Extended Runtime UPS System has been redesigned to save valuable space and simplify runtime scalability. Power and battery components are combined into a single, small-footprint module (the smallest in its class). The SU20K3/3XR5 features a large internal battery compartment that contains more internal batteries than the equivalent standard-run model (SU20K3/3) and more space to add additional optional internal battery packs to extend runtime. The SU20K3/3XR5 provides mission-critical equipment with the highest level of power protection available. Large capacity 20,000VA/16,000 watt UPS continually converts incoming AC power into filtered DC power, and then resynthesizes it back into AC power with a pure sine... Less

NON REVERSING; 1.5 KW AT 220 V 3 PHASE, 2.2 KW AT 660 V 3 PHASE, 4 KW AT 380/415/440 V 3 PHASE, 5.5 KW AT 500/550 V 3 PHASE, 1/2 HP AT 115 V 1 PHASE, 1 HP AT 230 V 1 PHASE, 2 HP AT 208/240 V 3 PHASE, 5 HP AT 480 V 3 PHASE, 7-1/2 HP AT 600 V 3 PHASE; 10 AMPERE (UL), 20 AMPERE (IEC THERMAL CURRENT); 1/3 PHASE; COIL VOLTAGE 110 V AT 50 HZ, 120 V AT 60 HZ; AUXILIARY CONTACT 1NO; SIZE IEC B; OPEN, DIN RAIL MOUNT ENCLOSURE; OVERLOADS BIMETALLIC AMBIENT TEMPERATURE COMPENSATED 1NO-1NC AUTOMATIC/MANUAL RESET CLASS 10/20; IEC CONSTRUCTION STANDARD; AE16 MODEL; APPROVAL UL, CSA; NUMBER OF POLE 3

NON REVERSING; 2.2 KW AT 220 V 3 PHASE, 5.5 KW AT 380/415/440 V 3 PHASE, 7.5 KW AT 500/550 V 3 PHASE, 4 KW AT 660 V 3 PHASE, 1/2 HP AT 115 V 1 PHASE, 2 HP AT 230 V 1 PHASE, 3 HP AT 208/240 V 3 PHASE, 7-1/2 HP AT 480 V 3 PHASE, 10 HP AT 600 V 3 PHASE; 12 AMPERE (UL), 20 AMPERE (IEC THERMAL CURRENT); 1/3 PHASE; COIL VOLTAGE 110 VAC AT 50 HZ, 120 VAC AT 60 HZ; AUXILIARY CONTACT 1NO RIGHT MOUNT; SIZE IEC C; OPEN, DIN RAIL MOUNT ENCLOSURE; OVERLOADS BIMETALLIC AMBIENT TEMPERATURE COMPENSATED 1NO-1NC AUTOMATIC/MANUAL RESET CLASS 10/20; IEC CONSTRUCTION STANDARD; AE16 MODEL; APPROVAL UL, CSA; NUMBER OF POLE 3

LEESON Electric and Lincoln Motors line of single phase General Purpose AC motors include both ODP and TEFC enclosures. Features include: Durable rolled steel frame Class B insulation High-quality ball bearings Easy-to-read nameplate Some 56 frame motors have a 56, 56H, 143T and 145T combination base with 12 mounting holes for flexible installation. UL Recognized Component Listing and CSA approval. Warranty - 12 months from date of first use or 18 months from date of manufacture, whichever comes first.

NON REVERSING; 4 KW AT 220 V 3 PHASE, 7.5 KW AT 380/415/440 V 3 PHASE, 11 KW AT 500/550 V 3 PHASE, 5.5 KW AT 660 V 3 PHASE, 1 HP AT 115 V 1 PHASE, 3 HP AT 230 V 1 PHASE, 5 HP AT 208/240 V 3 PHASE, 10 HP AT 480 V 3 PHASE, 15 HP AT 600 V 3 PHASE; 18 AMPERE (UL), 32 AMPERE (IEC THERMAL CURRENT); 1/3 PHASE; COIL VOLTAGE 110 VAC AT 50 HZ, 120 VAC AT 60 HZ; AUXILIARY CONTACT 1NO RIGHT MOUNT; SIZE IEC D; OPEN, DIN RAIL MOUNT ENCLOSURE; OVERLOADS BIMETALLIC AMBIENT TEMPERATURE COMPENSATED 1NO-1NC AUTOMATIC/MANUAL RESET CLASS 10/20; IEC CONSTRUCTION STANDARD; AE16 MODEL; APPROVAL UL, CSA; NUMBER OF POLE 3