Torque Wrench, Electronic, Drive Size 3/8 In, Head Type Fixed Ratcheting, Torque Range 10 To 100 Ft-lb, Torque Range 120 To 1200 In Lb, Torque Range 13.3 To 133.5 Nm, Graduations 0.01 Ft Lb, Graduations 0.1 In Lb, Graduations 0.1 Nm, Overall Length 19 In, Cw/ccw Rotation, Accuracy +/-2% Of Torque Reading Cw/ccw @ 10-100% Of Full Scale, Power Source (4)aa, 3 Modes, Converts Ft-lbs, In-lbs, Nm, Yellow/approach, grn/beep@target, red/beep/over Torqued, Calibration Certificate, Includes Blow Molded Box

Micrometer Torque Wrench, Fixed Head, Drive Size 3/8 In, Primary Scale Range 40-200 In Lb, Primary Scale Increments 1.0 In Lb, Secondary Scale Range 5.7-23.7 Nm, Secondary Scale Increments 0.11, Accuracy +/-3% Cw And +/-6% Ccw, 15 Degree Articulation, Automatic Reset, 50,000 Cycles, Length 11 3/8 In, Head Length 1 7/16 In, Head Thickness 3/8 In, Head Width 3/4 In, Audible Click, Exceeds Ansi Standards, Includes Blow Molded Box

FEATURES: Extended operation range in ft-lb In-lb and Nm units. Precision Accuracy: + / -1% in BOTH directions. Accuracy valid from 10% to 100% of Full Scale. Large easy to read digits. Patented rotary bezel. LCD and key pad rotate both ways up to 359 degrees for easy viewing. Torque target zone adjustable 1% to 10% indicates when the desired torque limit is approaching. -Yellow light indicates the low end of the zone. -Green light and buzzer sounds when the target is reached. -Red Light with intermittent buzzer indicates over-torqued. One button target torque setting. Ergonomically designed for user comfort. Operates on standard 9 volt battery. Torsion drive strain gauge technology improves accuracy.Users can pull on the handle anywhere and still maintain accuracy. Built on durable... Less

Micrometer Torque Wrench, Ratcheting Low Profile, Drive Size 3/8 In, Primary Scale Range 40-200 In Lb, Primary Scale Increments 1.0 In Lb, Secondary Scale Range 5.7-23.7 Nm, Secondary Scale Increments 0.11, Accuracy +/-3% Cw And +/-6% Ccw, 15 Degree Articulation, Automatic Reset, 50,000 Cycles, Length 11 3/8 In, Head Length 1 17/32 In, Head Thickness 3/8 In, Head Width 1 1/32 In, Audible Click, Exceeds Ansi Standards, Includes Blow Molded Box

Torqueplus fastening system drives off fastener body, more easily removing damaged fasteners. Reduces risk of fastener rounding. Applies more torque to fastener. Unique arc design increases surface contact. Anti-Slip Design (ASD) wrench has a locking groove prevents slippage and knuckle injury. Shank is positioned at the center of box end, reduces the tendency of the wrench to cock.

Micrometer Torque Wrench, Ratcheting Low Profile, Drive Size 3/8 In, Primary Scale Range 100-1000 In Lb, Primary Scale Increments 5.0 In Lb, Secondary Scale Range 17.3-119.0 Nm, Secondary Scale Increments 0.56, Accuracy +/-3% Cw And +/-6% Ccw, 15 Degree Articulation, Automatic Reset, 50,000 Cycles, Length 16 1/2 In, Head Length 2 3/32 In, Head Thickness 33/64 In, Head Width 1 7/16 In, Audible Click, Exceeds Ansi Standards, Includes Blow Molded Box

Micrometer Torque Wrench, Ratcheting Low Profile, Drive Size 3/8 In, Primary Scale Range 20-100 Ft Lb, Primary Scale Increments 0.5 Ft Lb, Secondary Scale Range 34-142 Nm, Secondary Scale Increments 0.68, Accuracy +/-3% Cw And +/-6% Ccw, 15 Degree Articulation, Automatic Reset, 50,000 Cycles, Length 16 7/16 In, Head Length 2 3/32 In, Head Thickness 33/64 In, Head Width 1 7/16 In, Audible Click, Exceeds Ansi Standards, Includes Blow Molded Box

FEATURES:0-30 in./lb thru 0-600 in./lb / 0-35 cm thru 0-700 cm kg. Includes protective blow molded box. Accurate to 4% of torque reading in both directions at 20% to 100% of full scale. Torsion drive design - -accuracy not effected by hand position. Dual scale (English/metric) with clockwise and counterclockwise operation - - fewer wrenches needed to complete job. Memory needles are standard on all wrenches except electric light models. Easy-to-read high contrast scale.

Micrometer Torque Wrench, Ratcheting Low Profile, Drive Size 3/8 In, Primary Scale Range 16-80 Ft Lb, Primary Scale Increments 0.5 Ft Lb, Secondary Scale Range 21-116 Nm, Secondary Scale Increments 0.68 Nm, Accuracy +/-3% Cw And +/-6% Ccw, 15 Degree Articulation, Automatic Reset, 50,000 Cycles, Length 16 7/16 In, Head Length 2 3/32 In, Head Thickness 33/64 In, Head Width 1 7/16 In, Audible Click, Exceeds Ansi Standards, Includes Blow Molded Box

Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge PROTO By STANLEY Type Micrometer Type Ratchet Head Torque Wrench Drive Size (Inch) 3/4 Maximum Torque (Ft/Lbs) 600.00 Maximum Torque (Nm) 834.000 Overall Length (Inch) 41-7/16 Minimum Torque (Nm) 142.000 Minimum Torque (Ft/Lbs) 120.00 Graduation (Newton/Meters) 1.700 Graduation 2 Model # J602AB MSRP: $955 Item appears to be unused overstock.Cannot guarantee accuracy of wrench as it may need to be re-calibrated.

Dial Torque Wrench, Electronic, Drive Size 3/8 In, Head Type Fixed, Torque Range 5 To 50 Ft-lb, Torque Range 60-600 In Lbs, Torque Range 7 To 70 Nm, Graduations 0.01 Ft Lbs, Graduations 0.1 In Lbs, Graduations 0.01 Nm, Overall Length 11 In, Cw/ccw Rotation, Accuracy +/-1% Of Torque Reading Cw/ccw @ 10-100% Of Full Scale, Power Source 9v, 3 Modes, Converts Ft-lbs, In-lbs, Nm, Yellow On Approach, Grn/beep @ Target, Red/beep When Over Torqued, Calibration Certificate, Includes Blow Molded Box

Micrometer Torque Wrench, Ratcheting Low Profile, Drive Size 3/8 In, Primary Scale Range 16-80 Ft Lb, Primary Scale Increments 0.5 Ft/lb, Secondary Scale Range 21-116 Nm, Secondary Scale Increments 0.11, Accuracy +/-3% Cw And +/-3% Ccw, 15 Degree Articulation, Automatic Reset, 50,000 Cycles, Mechanically Calibrated, Length 16 7/16 In, Head Length 2 3/32 In, Head Thickness 33/64 In, Head Width 1 7/16 In, Audible Click, Certificate Of Calibration, Exceeds Ansi Standards, Includes Blow Molded Box

Dial Torque Wrench, Electronic, Drive Size 3/8 In, Head Type Fixed, Torque Range 2 To 21 Ft-lb, Torque Range 25 To 250 In Lbs, Torque Range 3 To 30 Nm, Graduations 0.01 Ft Lbs, Graduations 0.1 In Lbs, Graduations 0.01 Nm, Overall Length 11 In, Cw/ccw Rotation, Accuracy +/-1% Of Torque Reading Cw/ccw @ 10-100% Of Full Scale, Power Source 9v, 3 Modes, Converts Ft-lbs, In-lbs, Nm, Yellow On Approach, Grn/beep @ Target, Red/beep When Over Torqued, Calibration Certificate, Includes Blow Molded Box

Micrometer Torque Wrench, Ratcheting Low Profile, Drive Size 3/8 In, Primary Scale Range 40-200 In Lb, Primary Scale Increments 1.0 In/lb, Secondary Scale Range 5.7-23.7nm, Secondary Scale Increments 0.11, Accuracy +/-3% Cw And +/-3% Ccw, 15 Degree Articulation, Automatic Reset, 50,000 Cycles, Mechanically Calibrated, Length 11 3/8 In, Head Length 1 17/32 In, Head Thickness 3/8 In, Head Width 1 1/32 In, Audible Click, Certificate Of Calibration, Exceeds Ansi Standards, Includes Blow Molded Box

Torqueplus fastening system drives off fastener body, more easily removing damaged fasteners. Reduces risk of fastener rounding. Applies more torque to fastener. Unique arc design increases surface contact. Anti-Slip Design (ASD) wrench has a locking groove prevents slippage and knuckle injury. Shank is positioned at the center of box end, reduces the tendency of the wrench to cock.

Micrometer Torque Wrench, Fixed Head Low Profile, Drive Size 3/8 In, Primary Scale Range 100-1000 In Lb, Primary Scale Increments 5.0 In/lb, Secondary Scale Range 17.3-119.1 Nm, Secondary Scale Increments 0.11, Accuracy +/-3% Cw And +/-3% Ccw, 15 Degree Articulation, Automatic Reset, 50,000 Cycles, Mechanically Calibrated, Length 16 1/4 In, Head Length 1 13/16 In, Head Thickness 3/8 In, Head Width 13/16 In, Audible Click, Certificate Of Calibration, Exceeds Ansi Standards, Includes Blow Mold Box

Dial Torque Wrench, Drive Size (in.) 3/8, Head Type Fixed, Primary Scale Range 0 To 600 In.-lb., Primary Scale Increments 10.0 In.-lb., Secondary Scale Range 0 To 700 Cm/kg, Secondary Scale Increments 20.0 Cm/kg, Overall Length (in.) 10, Cw/ccw Rotation, Accuracy +/-3 Percent Of Torque Reading Cw/ccw @ 20 To 100 Percent Of Full Scale, Memory Needle Yes, No Extension Handles, Meets/exceeds Ansi Specification B107.14m, En26789, Iso 6789, Calibration Certificate No, Includes Blow Molded Box

Dial Torque Wrench, Drive Size (in.) 3/8, Head Type Fixed, Primary Scale Range 0 To 50 Ft.-lb., Primary Scale Increments 1.0 Ft.-lb., Secondary Scale Range 0 To 7 M/kg, Secondary Scale Increments 0.2 M/kg, Overall Length (in.) 14-7/8, Cw/ccw Rotation, Accuracy +/-3 Percent Of Torque Reading Cw/ccw @ 20 To 100 Percent Of Full Scale, Memory Needle Yes, No Extension Handles, Meets/exceeds Federal Specification Ggg-w-00686c, Ansi Spec B107.14m, En26789, Iso 6789, Calibration Certificate No

FEATURES:0-10Nm thru 0-250 Nm / 0-250 in. lb. thru 0-175 ft. lb.Accurate to 4% of torque reading in both directions at 20% to 100% of full scale. Torsion drive design - - accuracy not effected by hand position. Dual scale (Metric/English) with clockwise and counterclockwise operation - - fewer wrenches needed to complete job. Memory needles are standard on all wrenches except electric light models. Easy-to-read high contrast scale.

Dial Torque Wrench, Electronic, Drive Size 3/8 In, Head Type Fixed, Torque Range 10 To 100 Ft-lb, Torque Range 120 To1200 In Lbs, Torque Range 14 To 140 Nm, Graduations 0.1 Ft Lbs, Graduations 0.1 In Lbs, Graduations 0.1 Nm, Overall Length 24 In, Cw/ccw Rotation, Accuracy +/-1% Of Torque Reading Cw/ccw @ 10-100% Of Full Scale, Power Source 9v, 3 Modes, Converts Ft-lbs, In-lbs, Nm, Yellow On Approach, Grn/beep @ Target, Red/beep When Over Torqued, Calibration Certificate, Includes Blow Molded Box

577-1244B Features: -Torqueplus fastening system drives off fastener body, more easily removing damaged fasteners.-Reduces risk of fastener rounding.-Applies up to 15pct more torque to fastener.-Unique arc design increases surface contact by 400pct.-Anti-Slip Design (ASD) wrench has a locking groove prevents slippage and knuckle injury.-Improves grip on worn, rounded fasteners.-Shank is positioned at the center of box end, reduces the tendency of the wrench to cock.-For access to areas where sockets and attachments will not fit or where greater leverage is required.-No. of Points: 12.-Opening Type: Open/Box.-Head Angle: 15 Open Side.-Offset Angle: 15 Box Side.-Handle Type: Oval.-Material: Forged Alloy Steel.-Measuring System: Inch.-Type: Combination Wrench. Color/Finish: -Finish: Black... Less

Precision spring design for long life and repeat use Calibrated and certified to ± 3% of torque reading clockwise Calibrated and certified to ± 6% of torque reading counter clockwise Audible click when desired torque is reached, wrench automatically resets itself Retains calibration for 30,000 cycles Low calibration drift for product reliability Drive Type: Male Square Head Type: Pear Locking Type: Ball Torque Setting: Micrometer

Calibrated to +/- 3% clockwise direction and +/- 6% counter clockwise at 20% to 100% of full scale Calibration is accomplished by manual loading the torque wrenches Manufactured to meet standard industrial torque applications, general industry, heavy equipment, and maintenance 3 - 8in. Drive Torque Wrench 20-100 ft lbs is one of many Wrenches available through Office Depot. Made by Proto.

Heavy box walls provide greater torque transmission. Box opening remains on fastener when wrench is struck. High strength rectangular design withstands heavy sledging. Straight handle resists springing for easier nut turning. For close quarter work where hammer or sledge is required to loosen frozen nuts or set large fasteners.

Torque Tester, Electronic Calibration System, Drive Size 3/8 In, Torque Range 5 To 50 Ft-lbs, Accuracy +/-1% Of Torque Reading Cw/ccw @ 10-100% Of Full Scale, Power Source 9v Battery, Track, Peak, First Peak Modes, Measuring Units In-lbs, Ft-lbs, Nm, Yellow, Green And Red Light, Beep, Display Rotates For Viewing At Almost Any Angle, For Use With Micrometer Torque Wrenches, Includes Female-to-female Square Drive Adapter

Precision spring design for long life and repeat use Calibrated and certified to ± 3% of torque reading clockwise Calibrated and certified to ± 6% of torque reading counter clockwise Audible click when desired torque is reached, wrench automatically resets itself Retains calibration for 30,000 cycles Low calibration drift for product reliability Drive Type: Male Square Head Type: Pear Locking Type: Ball Torque Setting: Micrometer

Torque Tester, Electronic Calibration System, Drive Size 3/8 In, Torque Range 25 To 250 In-lbs, Accuracy +/-1% Of Torque Reading Cw/ccw @ 10-100% Of Full Scale, Power Source 9v Battery, Track, Peak, First Peak Modes, Measuring Units In-lbs, Ft-lbs, Nm, Yellow, Green And Red Light, Beep, Display Rotates For Viewing At Almost Any Angle, For Use With Micrometer Torque Wrenches, Includes Female-to-female Square Drive Adapter

577-1244B Features: -Torqueplus fastening system drives off fastener body, more easily removing damaged fasteners.-Reduces risk of fastener rounding.-Applies up to 15pct more torque to fastener.-Unique arc design increases surface contact by 400pct.-Anti-Slip Design (ASD) wrench has a locking groove prevents slippage and knuckle injury.-Improves grip on worn, rounded fasteners.-Shank is positioned at the center of box end, reduces the tendency of the wrench to cock.-For access to areas where sockets and attachments will not fit or where greater leverage is required.-No. of Points: 12.-Opening Type: Open/Box.-Head Angle: 15 Open Side.-Offset Angle: 15 Box Side.-Handle Type: Oval.-Material: Forged Alloy Steel.-Measuring System: Inch.-Type: Combination Wrench. Color/Finish: -Finish: Black... Less

Torqueplus fastening system drives off fastener body, more easily removing damaged fasteners. Reduces risk of fastener rounding. Applies more torque to fastener. Unique arc design increases surface contact. Anti-Slip Design (ASD) wrench has a locking groove prevents slippage and knuckle injury. Shank is positioned at the center of box end, reduces the tendency of the wrench to cock.

1270-12 Model Code: AD (part# 1270-12) This item features: -Torqueplus fastening system drives off fastener body, more easily removing damaged fasteners. -Unique arc design increases surface contact by 400pct. -Applies up to 15pct more torque to fastener. -Shank is positioned at the center of box end, reduces the tendency of the wrench to cock. -No. of Points: 12. -Opening Type: Open/Socket. -Head Angle: 15 Open Side, 0 Socket Side. -Handle Type: Flat. -Material: Forged Alloy Steel. -Finish: Satin. -Measuring System: Inch. -Type: Combination Wrench. -Price is for 1 Each. Len. = Overall Length Len. = Overall Length Model Code  Model Description AAOpening Size:1/2 in, Head Width:1 3/32 in (open), 11/16 in (socket), Head Thickness:9/32 in (open), 5/16 in (socket), Overall Length:5/16 in,... Less