For day in, day out drilling and driving in wood, steel, or plastic, there might not be a better tool than Milwaukee's Magnum hole shooter. The aluminum/magnesiu m alloy on the gear case cuts down on the tool's weight, and the glass-reinforced nylon handle makes it a bit lighter, too--but let there be no doubt: when it comes to results, this is the same heavy-duty, ridiculously powerful, no-nonsense tool it's always been. The shooter is built with a stacked design--meaning the drill's interior parts stack on top of each other--which makes replacing parts (like a switch) much easier to do as the whole drill doesn't need to be taken apart. The handle is designed so you can hold it two ways--either pistol-grip or with the palm of your hand resting on the top back portion--making the drill an... Less

5 Speed 8" Bench Top Drill Press With 1/2" Keyless Chuck All-purpose drill press for the home or shop. Professional level accessories include a built-in worklight and tilt table. Adjustable table height Adjustable depth stop with gauge Heavy duty table and base Table rotates 360° and tilts 45° left and right Comes with built-in swivel worklight (takes standard bulb) 1/2" keyless chuck included Complete set up and operational booklet Volts: 120 VAC (60 Hz) Amps: 3.6 Motor: 1/3 HP 5 speeds Spindle speeds: 620, 1100, 1720, 2340, 3100 RPM Table size: 6 5/8" x 6 3/8" Table tilt: 45 degrees left and right Swing: 8" Column diameter: 1.89" Spindle stroke: 2" Spindle taper: JT33 Keyless Chuck capacity: 1/32" x 1/2" Overall dimensions: 24" H x 18" W x 8" D central machinery 5 Speed Bench Drill... Less

Craftsman Professional pneumatic drill delivers 35-Inch pounds of torque for incredibly fast drilling, honing, brushing and fastening. Contains a 3/8-Inch keyless Jacobs chuck, 1800 revolutions per minute (no load speed), and 1/2 horsepower motor. A thru handle exhaust directs dust and debris away from work surface. This tool offers a one touch forward/reverse switch over trigger. The polyurethane grip provides added comfort during continuous operation. This tool also has an average 4.0 standard cubic-feet per minute at 90 pounds per square-Inch, and 1/4-Inch National Pipe Thread air inlet.

NEW 3/8" Close Quarter Magnesium Drill w/ Keyless Chuck Condition: New Part Number: 95877 Description: Lightweight power drill designed for less hand fatigue during close quarter work Using a big drill for less demanding jobs can fatigue your hands and slow down your progress. Grab hold of this 3/8 close quarters power drill with keyless chuck and zip through your drilling job. The magnesium gear housing and rear drill plates are lighter and stronger than aluminum. The head is fixed at 90 degre

This is the workhorse 3/8 in. drill. For hole saws, twist bits and light fastening, the 0-1200 RPM unit has speed and torque for maximum versatility. Add the convenience and extra grip strength of the all metal single sleeve chuck and a Quik-Lock cord and

Powerful Milwaukee motor with variable speed control. Heavy-duty Grip-Lok 2-sleeve chuck with all metal gear case and diaphragm. 10ft. 2-wire Quik-Lok rubber cord for easy storage and field replacement. 360deg locking side handle. Ergonomic tactile grip and 2-finger trigger for user comfort and balance. Amps: 7, Chuck Size (in.): 3/8, Speed (RPM): 2,500, Cord Length (ft.): 10, Side Handle: Yes, Keyless Chuck: Yes, Variable Speed: Yes, Case Included: No

Powerful Milwaukee motor with variable speed control. Heavy-duty Grip-Lok single-sleeve chuck with all metal gear case and diaphragm. 8ft. 3-wire Quik-Lok rubber cord for easy storage and field replacement. 360deg locking side handle. Ergonomic tactile grip and 2-finger trigger for user comfort and balance. Amps: 7, Chuck Size (in.): 3/8, Speed (RPM): 1,200, Cord Length (ft.): 8, Side Handle: Yes, Keyless Chuck: Yes, Variable Speed: Yes, Case Included: No

Powerful Milwaukee motor with variable speed control. Heavy-duty Grip-Lok 2-sleeve chuck with all metal gear case and diaphragm. 10ft. 2-wire Quik-Lok rubber cord for easy storage and field replacement. 360deg locking side handle. Ergonomic tactile grip and 2-finger trigger for user comfort and balance. Amps: 7, Chuck Size (in.): 3/8, Speed (RPM): 2,500, Cord Length (ft.): 10, Side Handle: Yes, Keyless Chuck: Yes, Variable Speed: Yes, Case Included: No

The Worx Power Tools WT101K corded drill helps to get your drilling and nailing work done easily. Intelligently design, with comfortable revolver grip, this Worx Power Tools drill promises optimum productivity and reduces the possibility of injury. Thanks to the adjustable grip, boasting 65-degree angle of rotation, this corded drill lets you work on walls, ceiling, corners, low-angle drilling, and more. Featuring a max power of 6 amps, the Worx Power Tools WT101K makes for a perfect tool for the most demanding work conditions. The 3/8 keyless chuck of this Worx Power Tools drill allows quick and easy bit change. At 5.1 pound, this corded drill is lightweight enough for extended work hours, with minimum user fatigue.

Powerful Milwaukee motor with variable speed control. Heavy-duty Grip-Lok single-sleeve chuck with all metal gear case and diaphragm. 8ft. 3-wire Quik-Lok rubber cord for easy storage and field replacement. 360deg locking side handle. Ergonomic tactile grip and 2-finger trigger for user comfort and balance. Amps: 7, Chuck Size (in.): 3/8, Speed (RPM): 1,200, Cord Length (ft.): 8, Side Handle: Yes, Keyless Chuck: Yes, Variable Speed: Yes, Case Included: No

This Ingersoll Rand air drill features a lightweight, compact aluminum housing and reversible motor with quick-release lever. Variable-speed trigger for precise speed control. Chuck Size (i...

Pistol Grip Drill, Chuck Size 3/8 Inch, Drill Chuck Type Keyless, No Load Speed 0-1200 Rpm, Current @ 120vac 7.0 Amps, Tool Weight 4 Pounds, Cord Length 8 Feet, 3 Conductors Quik Lok, Tool Length 11.9 Inches, Includes Metal Grip Lock Chuck And Soft Grip Handle With Spindle Lock, Hole Shooter

Versatile and easy to handle, the DEWALT DWD115K 3/8-Inch VSR Mid-Handle Drill Kit with Keyless Chuck delivers the power you need in a light-duty drill for all your drilling and fastening projects. Enjoy the drill's variable-speed trigger, convenient reversing switch, and comfortable mid-handle grip, so you can work smarter for longer.3/8-Inch VSR Mid-Handle Drill Kit with Keyless ChuckAt a Glance:Reliable 8 amp motorVariable- speed control from 0 to 2,500 rpmSoft, non-slip rubber grip and lightweight designThree-year limited warranty, one-year free service, 90-day money-back guaranteeThe VSR Mid-Handle Drill is ideal for a wide range of drilling and fastening applications. View larger.Mid-Handle GripPatented DEWALT-Built Motor with Overload ProtectionWith its powerful 8 amp motor, the... Less

Shop at The Home Depot. The Dewalt DW222 3/8 in.VSR Drill made from helical-cut, heat-treated steel gears allowing for long life and durability. The single-sleeve keyless chuck with spindle lock provides greater bit retention and tool-free convenience, while the 2-finger, rubber trigger increases comfort. The drill is ideal for a range of applications including spade bit drilling applications in wood up to 1 1/4 in., hole saw drilling applications in wood up to 2 1/8 in., twist bit drilling applications in steel up to 3/8 in., hole saw drilling applications in steel up to 1 1/4 in.

JACOBS JK-130-R8 R8 Integral Shank High Precision Keyless Chuck R8 Shank Size 0.039" Minimum Capacity (1mm) 0.512" Maximum Capacity (13mm) Designed for greater rigidity and precision Self-tightening feature - automatically increases gripping force proportional to increased torque to prevent tool shank slippage T.I.R. 0.0016" maximum at half capacity with Wrench

BRAND NEW!! KEYLESS DRILLING CHUCK !! R8 SOLID SHANK KEYLESS CHUCK: 1/8" - 5/8" RANGE SURFACES ON ALL MAJOR COMPONENTS ARE PRECISELY GROUND AND LAPPED .00196" RUNOUT 1 SOLID PART COMES WITH WRENCH TO DOUBLE THE TORQUE IF NECESSARY. SHIPPING IS ONLY $11.99 FOR THE IMMEDIATE 48 STATES. ALL OTHERS REQUEST SHIPPING QUOTE THANKS FOR LOOKING AND DON'T FORGET THE OTHER QUALITY BRIDGEPORT AND METALWORKING PRODUCTS IN THE STORE, SUCH AS REPAIR KITS, REPLACEMENT PULLEYS, AND CLOCK SPRINGS. PLEASE NOTE: M

2611-7853 Features: -Drill.-Maximum power at minimum weight.-Lock on switch recessed in handle to prevent accidental lock on.-Soft grip handle for added comfort.-Oversized 2 finger trigger greatly increases comfort when frequently changing drilling speed.-Service minder brushes automatically stops tool when brush replacement is needed.-Sturdy belt clip frees hands to do other tasks.-Keyless chuck holds accessory exceptionally well for minimal slipping.-8' cord length. Specifications: -6.3 amps.

Dewalt DWD115K Specifications: Chuck Size: 3/8 " Keyless Chuck: Yes Amps: 8.0 No Load Speed: 0-2 500 rpm Max Watts Out: 650 W Gear Reduction: Single Handle Style: Mid-Handle Grip Anti-Slip Grip: Yes Anti-Lock Control: No Spindle Lock: N/A Capacity In Wood (Spade Bit) 1 " Capacity In Wood (Self-Feed) N/A " Capacity In Wood (Hole Saw) 1-1/8 " Capacity In Wood (Auger Bit) N/A " Capacity In Steel (Twist Bit) 3/8 " Capacity In Steel (Hole Saw) N/A " Tool Weight: 4.1 lbs Dewalt DWD115K Includes: Tool heavy-duty kit box Dewalt DWD115K Features: 8.0 Amp motor delivers high performance in heavy-duty applications 3/8" all-metal ratcheting keyless chuck for greater bit retention ... Less

1 Brand New Gromax 3 JAW Super Accurate Keyless Drill Chuck with integrated MT3 taper Shank (Model: INT16C.MT3 / 18012 ). Maximum Run-Out is within 0.05mm (0.002"). Extremely rigid construction minimizes the accumulative tolerance. Holding Capacity 1/8" - 5/8". Chuck made in Taiwan. Buy with confidence. We are in business for 20 years. If you are not completely satisfied within 7 days, just return it to get your money back. (S H not included.) Payment Gromax Enterprises Corp. accepts : PayPal ,

Also known as: CP 785QC, CP785QC, CPT-785QC, CPT785QC; Features and Benefits: Quick change chuck for fast bit changing Powerful air motor resists stalls and conserves energy Triple idler planetary gearing for smooth operation and extended life Teasing throttle provides precise control Handle exhaust reduces noise and directs air away from work Applications: accessory and air conditioner installation, engine work and auto body repair Free speed: 2400 rpm Chuck size: 3/8"-10mm Spindle size: 3/8"-24mm

Pneumatic Drill, General Duty, Drill Chuck Type Keyless, Chuck Size 3/8 In, Hp 1/2, Free Speed 2200 Rpm, Average Cfm @15 Second Run Time 6.1, Cfm @full Load 24, Required Pressure 90 Psi, Reversing, Bearing Ball/roller Bearing, Composite Handle Material, Variable Speed, Throttle Type' Trigger, Air Inlet Npt (in) 1/4, Min Hose (in) 3/8, Variable Speed Trigger Switch, Housing Aluminum, Planetary Gear Train, Tool Length 8 In, Tool Weight 2.6 Lb

payment | shipping rates | returns 90 Degree Right Angle 3/8" Keyless Chuck Drill Adapter Product Category :Home Improvement and Tools UPC :792363921879 Title :90 Degree Right Angle 3/8" Keyless Chuck Drill Adapter EAN :0792363921879 Description :Ideal for drilling cable pathways between studs and joists Lightweight, compact design Overall dimensions: 1-5/8'' W x 4-1/8'' H x 5-3/4'' L Weight: 1.20 lbs.Feature 1 :Great for getting into tight places Feature 2 :Attaches to any 3/8'' electric or ai

Clamping forces can be increased up to 3 times with light wrench tightening versus the standard hand tightening. The JKT series of drill chucks is well suited for use on drill presses with high accuracy. Jig bore machines, horizontal and vertical milling machines, and production drilling machines where the application requires higher feed rates. The tool better resists loosening on high speed machines that have instant spindle stop. Tool holding capacity up to 5/8" diameter. All JKT drill chucks are 100 percent inspected to ensure not to exceed a maximum total integrated run out of 0.0016.

Chicago Pneumatic 785QC features the 3/8" Air Drill with Keyless Chuck. Quick Change Chuck for fast bit changing, Powerful air motor resists stalls and conserves energy, Triple idler planetary gearing for smooth operation and extended life, Teasing throttle provides precise control, Handle exhaust reduces noise and directs air away from work, Applications: accessory and air conditioner installation, engine work and auto body repair, Free Speed: 2400 rpm, Specifications: Chuck Size in.: 3/8, Weight lb.: 2-1/4, Length in.: 7, Average Air Consumption CFM: 3, Air Inlet NPTF in.: 1/4, Free Speed rpm: 2400

The technically advanced keyless chucks are the most exciting innovations in drill chucks ever. They significantly reduce bit changeover time and boost productivity. Based on an exclusive patented design keyless chucks achieve higher gripping power than standard keyed chucks and there is never a key to misplace. They feature a non - rusting high performance body with a unique sure - grip sleeve for maximum user comfort and hand tightening efficiency.

Metal, wood or plastic, the Hitachi D1OVH drill handles it all with ease. The 6 Amp motor of this corded drill delivers maximum power. Use the variable speed dial of this Hitachi drill to perform tasks as per your requirement. Moreover, the form fit palm grip of this corded drill mitigates user fatigue. Equipped with a 3/8-inch keyless chuck, this Hitachi drill enables tool-free convenience. The Hitachi D1OVH is lightweight and compact, resulting in greater ease of use and maneuverability.

Bosch Best In Class Power-to-Weight Ratio - Maximum power at minimum weight 3/8 Jacobs Ratcheting Keyless Chuck - Holds accessory exceptionally well for minimal slipping Improved Lock-on Switch Design - Recessed in handle to prevent accidental lock-on New Soft Grip Handle Design - Now has soft grip for added comfort Oversized 2-Finger Trigger - Greatly increases comfort when frequently changing drilling speed

Variable speed cordless drill with 16 torque settings. Get the job done quickly with this handy 18-volt cordless drill. Features two speeds and 16 torque settings, plus a 3/8" keyless chuck. Includes 13-piece bit accessory kit and battery charger.. Type: Power Drills. Torque: 240.00 in lb. Voltage: 18.0 V. Power Drills Type: Cordless. Chuck Type: Keyless. Control Types: Variable. Speed Range (RPM): 0-1150. Power Type: Rechargeable Battery. Number of Speeds: 2.

Pneumatic Drill, General Duty, Drill Chuck Type Keyless, Chuck Size (in.) 3/8, Hp 0.5, Free Speed (rpm) 2900, Average Cfm @ 15 Second Run Time 5.25, Cfm @ Full Load 21, Required Pressure (psi) 90, Air Inlet Npt (in.) 1/4, Min. Hose (in.) 3/8, Aluminum With Rubber Grip Handle Material, Variable Speed Yes, Throttle Type Trigger, Reversing No, Bearings Ball Bearing, Variable Speed Trigger Switch, Housing Aluminum With Rubber Grip, Planetary Gear Train, Tool Length (in.) 7.8, Tool Weight (lb.) 2.5

Versatile and easy to handle, the DEWALT DWD110K 3/8-Inch VSR Pistol-Grip Drill Kit with Keyless Chuck delivers the power you need in a light-duty drill for all your drilling and fastening needs. Enjoy the drill's variable-speed trigger, convenient reversing switch, and comfortable pistol grip, so you can work smarter, longer.3/8-Inch VSR Pistol-Grip Drill Kit with Keyless ChuckAt a Glance:Reliable, 7 amp motorVariable- speed control from 0 to 2,500 rpmSoft, non-slip rubber grip and lightweight designThree-year limited warranty, one-year free service, 90-day money-back guaranteeA lightweight, versatile tool for all of your drilling and fastening needs. View larger.Patented DEWALT-Built Motor with Overload ProtectionWith its powerful 7 amp motor, the DEWALT DWD110K 3/8-Inch VSR Pistol-Grip... Less