Submersible "top discharge" slim - line dewatering pumps are designed for small diameter well casings and other hard to reach applications where other pumps are to large to fit the application space. Pumps are designed with heavy duty hard anodized aluminum and stainless steel hardware for long life and lighter weight. Pumps offer double mechanical seals, upper seal lubricator and class "H" motor insulation. Abraisive resistant stainless steel impellers ( 2 HP to 50 HP ) resist wear from sand , gravel and other abrasive materials. The built in strainer protects large particles from entering the pump. Pumps ( except model PF01311SCV) are supplied with a powder coated steel control enclosure which contains a circuit breaker which protects against short circuit, overload and locked rotor... Less

01012154461 Volts / Hz: 230V / 50-60Hz / 17' Shut-Off Head Features: -Fully Automatic.-1/2 gallon leakproof, rustproof, high impact ABS tank.-3 drain holes.-Removable 3/8'' barbed check valve.-New generation float arm for enhanced reliability.-Therm al overload protection.-Option al safety switch.-Suitable for High-Efficiency, Gas-Fumace Condensate.-ABS plastic motor and tank cover, and volute.-Polypropyl ene Impeller.-Stainles s steel shaft.-Snap-action switch.-6' power cord with 3-pronged plug.-Easy installation.-UL & CSA listed.-Model Number: VCMA-20ULST.-Horse power 1/30.-Flow 80 GPH @ 1' of Head.-Cord Length 6'.-Shut Off at 20'.-Voltage 115 or 230 (depending on the model).-Hertz 60 or 50/60 (depending on the model).-Amps 1.5.-Watts 93. Includes: -Includes 20' of 3/8'' ID tubing... Less

The Prince hand pump offers definite advantages over similar components of higher cost. The pump has unique design features which insure versatility. The handle can be used in (2) positions. The pump can be mounted vertically and horizontally. There are (3) different volume and pressure settings. Position 1: 1.25 cu. in. per stroke-1500 psi. Position 2: 0.95 cu. in. per stroke-2000 psi. Position 3: 0.60 cu. in. per stroke-3000 psi. At applied force of 60-65 lbs. on handle. (pressure to 6,000 psi can be developed with more force). Applications: this hand pump is designed for use wherever hydraulic pressure is needed without large flow requirements. Its sturdy design and positive sealing features will provide excellent service with a minimum of care. Uses range from mobile equipment to shop... Less

2 HP Centrifugal Stainless Steel Pump High-Volume, Chemical Resistant 3-Phase, 230/460V Model Number: 4JMW3 The listed item is NEW & UNUSED Note: This pump appears to have been returned from a previous purchase. The knock-out for the junction box has been removed, but the threads on both the inlet and outlet show no sign of installation - see photos. Original box is in distressed condition, not affecting contents. Applications: For continuous duty, high volume applications, including chemical processing, liquid transfer, cooling, and circulating. Specifications: Item Centrifugal Pump Type Straight HP 2 Phase 3 Voltage 230/460 Amps 8.0/4.0 Hz 60 Inlet 2" NPT Outlet 1-1/2" NPT Motor Enclosure ODP NEMA/IEC Frame 56J Motor RPM 3450 Service Factor 1.15 Wetted Materials SS, Carbon, Ceramic,... Less

Submersible "top discharge" slim - line dewatering pumps are designed for small diameter well casings and other hard to reach applications where other pumps are to large to fit the application space. Pumps are designed with heavy duty hard anodized aluminum and stainless steel hardware for long life and lighter weight. Pumps offer double mechanical seals, upper seal lubricator and class "H" motor insulation. Abraisive resistant stainless steel impellers ( 2 HP to 50 HP ) resist wear from sand , gravel and other abrasive materials. The built in strainer protects large particles from entering the pump. Pumps ( except model PF01311SCV) are supplied with a powder coated steel control enclosure which contains a circuit breaker which protects against short circuit, overload and locked rotor... Less

YOU ARE BIDING ON CONVERTIBLE JET TANK PUMP , HORIZINTAL TANK , 1/2 HP , 115/230 VOLT , 8.8/4.4 AMP , TANK PRESSURE 30/50 PSI , INLET 1-1/4" NPT , OUTLET 1" NPT , THE DIM : 40 1/2" LONG X 16" WIDE X 29 1/2" HIGH , MECHANICAL SEAL , 80 PSI MAX INLET PRESSURE , GPM OF WATER AT 10 FT AT 30 , 50 PSI IS 13.1- 6.8 , AT 20 FT AT 30 , 50 PSI IS 9.7 - 5.1 , AT 60 FT AT 30, 50 PSI IS 5 -1 , SHUTT OFF 69 PSI .TANK CAPACITY 30 GAL MEADE OF STEEL . UNIT IS NEW , SOME SCRATCHES MODEL # 4TB30 MFR : DAYTON

6.5HP engine makes this pump quiet, powerful and dependable! Silicon carbide mechanical seal lasts much longer than ceramic seals and is far more resistant to corrosion, wear and heat. 2in. inlet and outlet. Includes FREE wrench and strainer. Specifications Inlet and outlet diameter: 2 " (50 mm) Max. lift head: 92 ft (28 m) Max. suction head: 26 ft (8m) Max. flow rate: 158 GPM (600L/Min) Engine: Displacement: 169 ml Max. power: 4.8 kw (6.5HP) / 3600 rpm Engine: type: OHV25 Tilt single cylinder forced air cooling, 4 stroke Fuel tank capacity: 1 US gallon Oil capacity: 20 oz

YOU ARE BIDDING ON Engine Driven Centrifugal Pump, Self Priming, Trash, HP 5.5, Ignition Type Electronic, Honda OHV, Sensor Type Low Oil, NPT Port 2 In, Check Valve NBR/Steel, Maximum Pressure 38 PSI, Height 15 1/2 In, Width 17 1/8 In, Impeller High-Crome Ferrum, Impeller Type Semi Open, Solids Handling Capacity 13/16 In, Liquid Temp Range 35 to 105 Deg F, Pump and Casing Adapter Aluminum/Steel, For Use With Nonflammable Liquids, GPH of Water @10 Ft of Head 9900, @40 Ft of Head 7980, Max Head 8

Centrifugal Pump, Straight Center Discharge, 1-1/2 Hp, 1 Phase, Voltage 115/230, Amps 18.4 / 9.2, 60 Hz, Inlet 1-1/4 In., Outlet 1 In., Motor Enclosure Tefc, Nema/iec Frame 56j, Motor Rpm 3500, Wetted Materials Ansi 316l Ss, Impeller Material 316 Ss, Housing Material 316 Ss, Seal Material Silicon Carbide, Viton And Stainless Steel, Max. Liquid Temp. 212 F, Max. Head 135 Ft.

115V 1/2HP 9AMP UTILITY TRANSFER PUMP