With this commercial grade Oreck Orbiter Floor Machine, you can effectively clean all flooring surfaces with one unit. Floor machine dry cleans carpet and removes allergens, buffs and sands hard wood floors, and scrubs and cleans ceramic tile and grout. The 1/2HP induction type motor delivers plenty of power for tough tasks, and weighs only 24 lbs. The Oreck Orbiter Floor Machine with 13" cleaning path can also be used to polish and strip vinyl, scrub and clean brick and slate, clean and polish marble, and to remove dirt and grime from grout lines in quarry tiles. Replaces labor intensive deck brushes and other scrubbing methods. Includes a 30' grounded 3 wire and pad holder. Use with scrub, polish, strip, brush and other pads (sold separately) for a variety of applications. One year... Less

PORT-A-COOL EVAPORATIVE COOLERS Replacement Part 1 HP Motor -2-Speed for 48 Evaporative Coolers Replace old, worn out parts and accessories to your evaporative cooler. Installs in 48 Evaporative Coolers. 1 HP, 2-speed motor for optimum cooling for your environment. This energy efficient motor operates at 115V for effective cooling at low operational costs.

AIR MOTOR ONLY FOR FINISH THOMPSON EF SERIES DRUM & BARREL PUMPS 1/2HP S4 air motor only, 300-11,000 RPM, 40 PSI @ 27 CFM, 15 GPM, 17' TDH, for use with EF series pump tube. 10.00 L. 10.00 W. 6.00 H.

PORT-A-COOL EVAPORATIVE COOLERS Replacement Part 1/2 HP Direct Drive Motor - 3-Speed for 16 Evaporative Coolers Replace old, worn out parts and accessories to your evaporative cooler. Installs in 16 Evaporative Coolers. 1/2 HP, 3-speed direct drive motor for optimum cooling for your environment. This energy efficient motor operates at 115V for effective cooling at low operational costs.

Garland - 1686712 Motor; 3/4 Hp 2 Speed Garland - 1686712 Motor; 3/4 Hp 2 Speed. 208/240V, 3/4HP, 1725/1140RPM, 2 SPEED, HAS END SWITCH, 5/8" X 3-1/2" (2 FLATS) SHAFT, 6-3/16" CTR MT USE BLOWER WHEEL MB-172, A963, # 261464 GARLAND OVEN MODEL MCO-ES-ED-10, MCO-GS/GD-10

NOTE: Image shown is of a Square Flange motor this motor is a Round Flange Motor Premium- Efficiency 2-Speed Pool Motor with Integrated Timer A. O. Smith’s new 2Green two-speed premium efficiency replacement pump motor with integrated timer packs tremendous value into an easy to- nstall package. Energy efficiency continues to drive the needs of the pool market, from legislation to increased awareness of energy costs and environmental impact. And thanks to the 2Green’s energy efficient high and low speed windings paired with an onboard timer interface, energy consumption can be reduced by as much as 58% over single speed motors. The all-in-one integrated motor and timer means less work for an installer and maximum energy savings for pool and spa owners. A. O. Smith’s 2Green is Title 20... Less

All single phase models are equipped with totally enclosed, fan cooled, permanently lubricated motors. Heavy-duty motor design with a continuous duty rating for industrial applications. Heavy-duty base,mounted on four swivel casters for total mobility and stability. Precision spin-balanced aluminum impeller for smooth operation, minimal noise and to reduce the risk of sparking. All models are equipped with 2 micron filter bags. (Not included on “CF”canister filter model) Quick-release bag clamps with metal straps on all models. Safety switch with key, prevents unit from being started when key is removed. Heavy-duty collection bags made from extra thick, transparent, recyclable plastic. Inlet diameters (1) 6” (152 mm) (or 2) 4” (102 mm) Airflow capacity 1550 CFM Blower wheel 12’’ (305 mm)... Less

Shaded Pole Motor, Totally Enclosed Air Over, Hp 1/20, Rpm 1500, Number Of Speeds 1, Voltage 230 V, Non Standard Nema/iec Frame, Body Diameter 3 7/8 Inch, Service Factor 1.00, Frequency 60 Hz, Mounting Holes, Bearings Unit, Thermal Protection Automatic, Shaft Dimensions 1/4-20 X 1/2 Inch Threaded Inch, Full Load Amps 0.7, Rotation Cwle

1/15 HP Motor - Two-Speed Shaded pole, 1/15 HP, 2 Speed,115V, Totally Enclosed Air Over Ball Beariing Motor with 1/2" shaft diameter, 2 Speed switch, 10' cord and plug 10.00 L. 11.00 W. 13.00 H.

General Purpose, Capacitor Start-Inductor Run Motor: 1/2HP, 1725 RPM, Drip-Proof (DP) Enclosure, 56 Frame, Resilient Base Mount, 115/208-230V, 1PH, 60HZ, Name Plate Amps 8.8/4-4.4, Continuous duty, 1.25 Service Factor, Automatic thermal protection, Efficiency: 62, Efficiency Type: Standard, Ambient 40 C, Selective CCW Rotation, Shaft Length 1-7/8", Shaft Diameter 5/8".Drip proof (DP)enclosure has vents in end shield and/or frame to prevent drops of liquid from falling into motor within a 15 degree angle from vertical. Designed for use in areas that are reasonably dry, clean, and well ventilated (usually indoors). If installed outdoors, it is recommended that the motor be protected with a cover that does not restrict the flow of air to the motor. Click here to see our full selection of... Less

GE 3588 1/2HP 3-Speed Frame Motor With Capacitor GE 3588 1/2HP 3-Speed Frame Motor With Capacitor GE 39 NEMA 48 Frame Motor Permanent Split Capacitor, Single Shaft **PRICE INCLUDES NEW RUN CAPACITOR RATED FOR THIS MOTOR.** Applications: Unit heaters, furnace blowers, unit coolers, fans and blowers Features: Rotation: Electrically reversible All-angle sleeve bearing Mounting holes in shell for capacitor bracket Continuous air over, overload protection Color coded leads, 2- and 3-speed 3588 1/2 208-230 1075 3-Speed 1/2"

Value Priced 1/2 HP Buff Motor with Economy Buff Stand - Here's a great solution for the budget minded enthusiast This high value system includes the durable (13542) 1/2 Hp Buff Motor with sealed case design for durability, and the (13162) Economy Buff Stand to save bench top space. 60 day Eastwood1/2-HP, 3450-rpm buff motorincludes a cast iron stand Value Priced 1/2 HP Buff Motor with Economy Buff Stand - Here's a great solution for the budget minded enthusiast This high value system includes the durable (13542) 1/2 Hp Buff Motor with sealed case design for durability, and the (13162) Economy Buff Stand to save bench top space. 60 day Eastwood 13544 BUFF POLISH BENCH TOP BENCHTOP BUFFING POLISHER POLISHING METAL FINISHING 5/8 1/2 SHAFT HORSEPOWER HORSE POWER

It is important to know that pool pump motors are not manufactured by the pump manufacturer, the motor will usually be manufactured by AO Smith, Magnetek or Centurion. Your pump's motor should have a label or faceplate on it which includes the information you need to replace your pump motor. The most important categories to note will be the horsepower (hp), motor frame (fr), voltage and service factor (sf). Some labels will provide you with a model number and it will usually be listed as CR or CAT. Energy Efficient 2 Speed High Speed: 2 Horsepower Low Speed: 1/4 Horsepower 230 Volts 8.5 / 2.8 amps Frame: 48Y Mounting: Thru-Bolt Rigid Base Mount Welded to Motor Case Automatic overload protection Non-Reversible CCW facing the shaft When replacing your pool pump motor you... Less

TPI REPLACEMENT MOTORS 1/4 HP Motor for Fixed 24" & 30" Industrial Fans These TPI replacement motors help replace or upgrade old, worn out and broken motors. TPI motors feature 2-speed operation with pull chain control. Single-phase ball bearing motors are totally enclosed and permanently lubricated for long life and low maintenance. Permanent split capacitor (PSC-type) motor has a 1/2" shaft. Includes 12'L SJT type, 3-conductor power cord. 120V. UL listed. 1 Year Limited Warranty. Horsepower rating based upon maximum speed/load.

The long lasting motor of the Duralast will endure the 24/7 schedule of a hotel, health club or other commercial property. The unique design ensures a lengthy motor life and is offered in 5 speeds.

Ideal for use with Machine Oils, Transmission Fluids, Boric Acid Ethylene Glycol and Potassium Chlorate. 1/2 Hp Air Motor, 39" intake tube 35 GPM, 35 feet of head, 1500 cps Seal-less design allows for run-dry capability. Variable speed motor for controlled dispensing. Comes with 6 foot hose, nozzle, mounting bracket and 2" bung adapter

Taylor Made's Oil-Free Design is More Energy Efficient Than Oil-Filled Units Analysis, improvement, innovation, and testing, result in proven, superior performance. Why Choose Our Oil-Free D-Icer? Our innovative motor design, high-efficiency, and extra features leave the competition behind. A superior product that costs no more than the competition. It is a powerful submersible motor-driven water circulation unit that prevents ice formation during winter months by continuously propelling warmer subsurface water up to the surface. The Taylor Made D-Icer keeps the area ice-free. It's ideals for use around a boat or dock.Our Unique Design The unique one-piece design of the shroud prevents large debris from being sucked through and damaging the propeller, a major cause of failure in other ice... Less

This 16"/ 40cm Intrinsically Safe Turbo Blower is precision balanced, with a cast aluminum turbo impeller. UL and ATEX Certified Motors for safe use in adverse atmospheres. Non-sparking, heat resistant Lexan polycarbonate housing with 4-corner handles for fast set-up and storage. Built for smoke ejection in hazardous conditions and confined spaces. High velocity flow decreases desmoking time dramatically. Lightweight, compact design stacks easily. Door bar and hanger for suspending in doorways and windows. Horsepower rating based upon maximum speed/load. 22.00 L. 22.00 W. 17.00 H.

Molded of rugged corrosion proof fiberglass filled resin for extra durability and long life. Note: There is no industry standard for Unions. The various brands have their own unique style, which means you must use the unions provided with the spa pump. This will most likely involve cutting off your old unions and installing the new ones shipped with the whirlpool pump. 1.5" PVC means 1.5" schedule 40 PVC. Your PVC supply lines slide into the pump union not the threaded inlet/outlet. Pump does not come with power cord.

THIS IS A BRAND NEW IN THE BOX 1 1/2 HP 1 CYLINDER,4 CYCLE TELEDYNE MILITARY ENGINE,THE ENGINE YOU GET HAS NEVER BEEN OUT OF THE BOX FROM THE FACTORY.IT HAS ALL PAPERWORK AND MANUAL WITH IT.THE ARMY SURPLUS STORES ARE SELLING THE SAME ENGINE FOR $250.00 TO $300.00 PLUS SHIPPING.THIS ENGINE IS $210.00 AND YOU GET FREE SHIPPING. SATISFACTION OR YOUR MONEY BACK,NO QUESTIONS ASKED.EMAIL ANY QUESTIONS OR CALL QUESTIONS TO 662-213-2152.GOD BLESS AMERICA AND OUR TROOPS.

PORT-A-COOL EVAPORATIVE COOLERS Replacement Part 1/2 HP Direct Drive Motor - Variable Speed for 24 Evaporative Coolers Replace old, worn out parts and accessories to your evaporative cooler. Installs in 24 Evaporative Coolers. 1/2 HP, variable speed direct drive motor for optimum cooling for your environment. This energy efficient motor operates at 115V for effective cooling at low operational costs.

%100 NEW AFTERMARKET TILT TRIM MOTOR 12 VOLT 2-WIRE CONNECTION (BULLET CONNECTOR ENDS) 1 2 RAM TRIM/TILT SYSTEMS W/YELLOW PLUG USED ON: FORCE 40-125 HP 1-2 RAM SYSTEMS MERCURY 40-125 HP 1-RAM SYSTEM REPLACES: MERCURY MARINE 809885T2 ONE YEAR WARRANTY NO CORE NEEDED FOR INQUIRIES PLEASE CLICK ON ASK A QUESTION LOCATED AT TOP RIGHT SIDE OF LISTING RETURN POLICY: ITEMS UNDER WARRANTY ARE EXCHANGED. BUYER IS RESPONSIBLE FOR WARRANTY RETURN SHIPPING EXPENSES. RETURNED ITEMS ARE SUBJECT TO 20% SHIPPI

Shaded Pole Motor, Open Air-over, 1/6 Hp, 1050 Rpm, Number Of Speeds 2, 230 Volts, 2.9 Full Load Amps, 42y Nema Frame, Body Diameter 5 In, Service Factor 1.0, 60 Hz, Cradle Mounting, All-angle Sleeve Bearings, Auto Thermal Protection, Shaft Diameter 1/2 In, Shaft Length 8 In, Ccwle Rotation, Ambient 40 C, Insulation Class A, Continuous Duty, Resilient Ring Diameter 2 1/2 In, Ring To Ring Center 4-3/4 In, Length Less Shaft 5 3/16 In, Lead Length 36 In

Pricing subject to change. 1/2 Hp Motor

Our most affordable 1/2-HP Buff Motor Kit comes with everything you need to buff metals and plasticYou get a powerful buff motor buffing kit with wheels, compounds and more and even a stand that puts your work at a comfortable height.1/2-HP, 3450-rpm Buff MotorBuffing Kit with 6-dia. Buffs and moreCast Iron/Steel Pedestal Stand1/2-HP, single-speed motor with 6buffs, compounds, cast iron stand 1/2-HP Buffer works at 3,450 rpm, so it's ideal for buffing metal or plastics. 5/8-diameter shaft fits buffing wheels with 1/2 soft-center arbor holes. Overall actual width is 22-3/4. Shaft extends 6-3/4 beyond the bell-shaped sealed motor housing. 110v AC. CE-approved. 60-day Eastwood warranty. Imported.Buffing Kit includes eight 6-diameter, 1/2-wide buffing wheels (2 each sisal, loose, spiral, and... Less

NOTE: Image shown is of a Square Flange motor this motor is a Round Flange Motor Premium- Efficiency 2-Speed Pool Motor with Integrated Timer A. O. Smith’s new 2Green two-speed premium efficiency replacement pump motor with integrated timer packs tremendous value into an easy to- nstall package. Energy efficiency continues to drive the needs of the pool market, from legislation to increased awareness of energy costs and environmental impact. And thanks to the 2Green’s energy efficient high and low speed windings paired with an onboard timer interface, energy consumption can be reduced by as much as 58% over single speed motors. The all-in-one integrated motor and timer means less work for an installer and maximum energy savings for pool and spa owners. A. O. Smith’s 2Green is Title 20... Less

General Purpose, Capacitor Start-Inductor Run Motor: 1/2HP, 1725 RPM, Drip-Proof (DP) Enclosure, 56 Frame, Rigid Mount, 115/208-230V, 1PH, 60HZ, Name Plate Amps 8.8/4-4.4, Continuous duty, 1.25 Service Factor, Manual thermal protection, Efficiency: 62, Efficiency Type: Standard, Ambient 40 C, Selective CCW Rotation, Shaft Length 1-7/8", Shaft Diameter 5/8".Drip proof (DP)enclosure has vents in end shield and/or frame to prevent drops of liquid from falling into motor within a 15 degree angle from vertical. Designed for use in areas that are reasonably dry, clean, and well ventilated (usually indoors). If installed outdoors, it is recommended that the motor be protected with a cover that does not restrict the flow of air to the motor. Rigid base allows motor to be rigidly mounted on... Less

Edemco box dryers are rugged, high-volume and heavy-duty. Its ability to create high air speed enable it to remove water and loose coat hair quickly. These edemco pet dryers are affordable and very popular because they reduce drying time and lower energy costs. The 3 motor 4.5-horsepower edemco box dryer includes a 6-feet hose, a hose nozzle, and a cage attachment. The power cord length is 8-feet. An optional cart dryer stand with casters raises the dryer and makes it portable. Requires 20-ampere circuit breaker and 20-ampere outlet. 99/198/290 cfm air volume, 3,000-35,000 fpm air speed, no heat, 4.5-horsepower motor (three motors), 20-amperes, 2300-watts, 115/120-volts. Manufacturer's two-year warranty. Measures 21-inch length by 20-1/2-inch width by 20-1/2-inch height.

Economical, compact and portable, providing you the most power in a small parcel. Superior outboard anti corrosion system and anodes for increased durability Features 360 degree steering rotation for reverse without gear shifting Start-In-Gear protection/clutch feature prohibits prop rotation while idling Durable cast aluminum construction for superior corrosion protection Through the prop exhaust outlet for decreased noise and pollutants Heavy duty lightweight aluminum cast propeller is standard equipment Lift/Tilt feature for shallow water operation and convenience Steering friction adjustmentand tiller attrition knob adjustment Perfect for inflatables, fishing boats, sailboats and small yachts

Call Toll Free 1-866-513-5799, Mon-Fri 8-9, Sat and Sun 10-5 EST About Us Product Details Store Policy More In Water Trash Pumps 1/2 HP Vertical Float Switch Thermoplastic Sump Pump with Epoxy Steel Motor Case OUR SKU# WAY1006 MPN: SPF50 Condition Brand New Shipping Free Shipping Leaves warehouse in 3 to 5 business days With a transit time of 1-5 business days Standard Ground (e.g. UPS, FedEx). Please note that this product cannot be shipped to Alaska, Hawaii, or Puerto Rico. We apologize for t