26 tv

Transport your expensive AV equipment without the fear of damage on Buhl's Wide Frame Flat Panel TV Cart. This heavy-gauge steel cart holds up to a 32 flat panel TV or monitor and has a wide design that helps prevent tipping. There's plenty of storage for additional AV equipment and supplies on the two slide-out side shelves and in the durable locking cabinet. Adjust the height of the cart from 26 to 42 and give the audience a great view of your flat screen. The posts have built-in wire conduits for your convenience. Comes with a four-outlet surge-protected electrical assembly with 20' cord and cord winder. Ships ready for you to assemble. Backed by a limited lifetime warranty. Key Features Backed by a lifetime warranty Store expensive equipment in the locking cabinet Holds up to 32... Less

Take your 26-29 screen television to a whole new dimension - 36 to be exact. This easy to assemble TV screen enlarger is made specifically for your 26-29 televison screen, turning it into a quality 36 picture. The curved lens reduces distortion and the blue color enhances the image. Plus, the height and magnification are both adjustable during installation. It's great for enhancing closed captioning. Shipping weight: 10 lbs. Shipping measurements 34 x 5 x 25

This FAG double-row self-aligning ball bearing is an open bearing, and has a cylindrical bore, polyamide/nylon cage, and normal clearance rating. It is suitable for applications supporting moderate radial loads and moderate to low thrust loads. This bearing has concave sphered housing rings to compensate for static angular misalignments between the shaft and housing in applications subject to shaft deflections or mounting errors. Because this bearing type has the lowest operational friction of all rolling bearings, it runs cool at high speeds. This bearing is made of low-alloy, through-hardened chromium steel for durability and resistance to deformity under heavy loads. The bearing has a straight bore for fitting on a conventional cylindrical shaft. Its open design facilitates lubricating... Less

This LCD TV stand has a simple design that adds contemporary styling to any room. The floor-standing monitor display fixture is designed to hold a flat screen television ranging in size from 26 inches to 42 inches. The VESA-compatible brackets match the following range of standard measurements: 50mm by 100mm through to 600mm by 400mm. Please verify the pattern of mounting holes located on the back of your plasma or LCD monitor before purchasing any television display holder. This TV stand is made from tempered glass and features a black coloring the blend in with any décor. A height- adjustable glass shelf is included and is held securely in place using suction cups, brackets and rubber-tipped screws. The shelf measures 21.75 inches wide by 13.75 inches deep. It is 0.25 inches thick. This... Less

WoodWare Furniture's Endure Flat Panel TV Stand is a smart choice for your classroom or office. This heavy-duty stand features a sturdy glass shelf designed to hold a DVD player. A full-length cable management channel keeps wires organized and out of the way for a neat appearance. Four large casters - two braking - make it easy to move the stand across any floor. WoodWare Furniture's Endure Flat Panel TV Stand holds a 32-53 screen. Key Features Heavy-duty TV stand Glass shelf for DVD player Large casters Holds a 32-53 screen Specifications Width: 33 Depth: 26 Height: 68 Caster Diameter: 3

This FAG double-row self-aligning ball bearing is an open bearing, and has a tapered bore, polyamide/nylon cage, and C3 clearance rating. It is suitable for applications supporting moderate radial loads and moderate to low thrust loads. This bearing has concave sphered housing rings to compensate for static angular misalignments between the shaft and housing in applications subject to shaft deflections or mounting errors. Because this bearing type has the lowest operational friction of all rolling bearings, it runs cool at high speeds. This bearing is made of low-alloy, through-hardened chromium steel for durability and resistance to deformity under heavy loads. The bearing has a tapered bore with a standard 1:12 taper to compensate for shaft deflection or to mount on a tapered shaft... Less

This TV stand displays a flat-screen monitor between 23 and 30 inches. The VESA-compatible bracket measures 200x100. This silver floor TV stand includes a height- adjustable metal literature pocket that is 18.25 inches wide. Locking casters included! You can also use our How-To page for further information on how to find a mounting bracket to fit your monitor. This TV stand, also known as a plasma stand and an LCD stand, can hold a 23 to 30 TV, weighing less than 50 lbs, utilizing a 200 x 100 VESA bracket . We ship all the necessary hardware to mount most televisions, however some TVs will require specific screws you can get at a local hardware store. The TV stand has a metal pocket mounted on the front to hold either brochures or magazines easily. This plasma stand is an ideal TV stand... Less

Panasonic PT61DLX26 TV lamp replacment including 90 days warranty.

The VisionMount VMF322 Super Slim full-motion mount places 26 - 47 TVs just 1.4 / 3.5 cm from the wall, yet extends 22 / 56.1 cm from the wall and allows full-motion capabilities. The VMF322 features fingertip tilt technology, which allows easy TV angle adjustments with the touch of a finger. With its integrated cable management system, the VMF322 keeps loose cables organized and concealed within the extension arm for a clean appearance without compromising TV motion. Its post- installation leveling adjustment ensures the TV is perfectly positioned on the wall. The VMF322 always has a finished appearance with a decorative cover that conceals assembly and mounting hardware. Super Slim full-motion mount sits just 1.4 / 3.5 cm from wall to complement the sleek look of ultra-thin TVs ... Less

26 720p LED TV LED edge backlight for high picture contrast,60Hz refresh rate,Picture Wizard II easy screen calibration

This FAG double-row self-aligning ball bearing is an open bearing, and has a cylindrical bore, polyamide/nylon cage, and normal clearance rating. It is suitable for applications supporting moderate radial loads and moderate to low thrust loads. This bearing has concave sphered housing rings to compensate for static angular misalignments between the shaft and housing in applications subject to shaft deflections or mounting errors. Because this bearing type has the lowest operational friction of all rolling bearings, it runs cool at high speeds. This bearing is made of low-alloy, through-hardened chromium steel for durability and resistance to deformity under heavy loads. The bearing has a straight bore for fitting on a conventional cylindrical shaft. Its open design facilitates lubricating... Less

TV Console in Cappuccino by Coaster This sophisticated media console will add an understated look to your contemporary living room. The smooth top will accommodate your television, while two glass doors below offer ideal storage for electronics components, allowing you to use your remotes through the glass. Clean lines on this TV stand create a chic style, with gently curved edges, all in a deep Cappuccino finish. Sleek silver tone metal handles complete this stunning look. Add this beautiful media console to your living room for an instant style update, with the benefit of great functionality. Choose from a variety of TV stands to fit your needs and complement your home decor! With many different styles, finishes, and sizes available you are sure to find an option that you love. With... Less

This plasma stand is designed to hold a flat panel monitor ranging from 23 to 30 in size. The tilt mechanism displays a television at athe best angle possible. This plasma stand includes a metal literature tray, wheels and tubes to hide cables. You can also use our How-To page for further information on how to find a mounting bracket to fit your monitor. Stand Tilts with Ease! This TV stand, also known as a plasma stand and an LCD stand, can hold a 23 to 30 TV, weighing less than 50 lbs, utilizing a 200 x 100 VESA bracket . We ship all the necessary hardware to mount most televisions, however some TVs will require specific screws you can get at a local hardware store. The TV stand has a metal pocket mounted on the front to hold either brochures or magazines easily. This plasma stand is an... Less

Customize your home interior with the Wall Mount Collection by Sonax. Your TV will hug the wall with this fixed flat panel wall mount designed to accommodate most 26-42 TV's. This low profile design sits just 2.6 cm from the wall for a sleek and polished look. Equipped with a built in leveling system for easy DIY installation this mount can support up to 80lbs. Bring home this wall mount today and compliment it with your favorite Sonax TV or component stand.

The cast of characters from iconic brand Paul Frank are now available for your pet exclusively through 26 Bars & a Band. Beds are made with Sustaina-Fil and offer the utmost comfort for your pet. Cover is machine washable and easy to clean. Bottom of cover is anti-skid proof. Great for any animal and a must-have for a Paul Frank fan. For extreme Paul Frank fans this bed will look great in a kid's room or just to freshen up your living space.Slip cover made in China; filler made in the USA

Rope Single Cable TV Outlet