30 Ton Hydraulic Tie-Rod Cylinder 5 X 24 Hydraulic Cylinder - 30 Ton Logsplitter Cylinder Manufacturer SKU DBH-5024-3 Bore: 5" Stroke: 24" Rod Dia: 2" Retract: 34.25" Ports: #10 SAE Pin Dia: 1.25" E-mail a friend about this item. Part #: DBH-5024-3 DALTON 3000PSI Tie-Rod Hydraulic Cylinder Features: Made in USA Chrome Plated, Herdened Rod/Honed Tubing Heavy-duty, high strength tie-rods Exceptional paint performance- Aircraft quality two-part paint 4 Year Warranty (see catalog for full details) S

Slave units deliver up to 120 inch-pounds of torque through 80° of travel and will accommodate marine engines and hydraulic transmissions used on most boats to 100 feet. Throttle slaves contain an over-travel bungee to assure that the slave piston will reach end stroke in each direction. The transmission slave unit has a mechanical detent to indicate a neutral position. Each throttle slave is equipped with an internal pilot check valve which prevents control arms from drifting back to an idle position. SN: HYNSS-04 11145

THIS A NEW LION 3000 PSI HEAVY DUTY TIE ROD HYDRAULIC CYLINDER! Built tough for agricultural and industrial applications. 3000 PSI model is designed to withstand shock loads of up to 6000 PSI. Durable ductile iron cast components. 90 durometer O-ring seals with antiextrusion rings for positive sealing throughout the cylinder. High tensile steel shaft is precision ground, polished and hard chrome-plated. Cylinder can be single or double acting. Attach one port for single and both ports for double acting.30-month limited warranty. Max. PSI 3,000 Bore Diameter (in.) 4 Stroke Length (in.) 24 Closed Pin Center (in.) 34 1/4 Shaft Diameter (in.) 1 3/4

Prince Welded Fortress Hydraulic Cylinder; Bore: 4-1/2", Stroke: 24", Maximum pressure: 3000 psi, Column load: 47703 lbs, Retract: 33", Rod diameter: 2-1/4", Mounting type: Crosstube end fittings with grease zerks, Color: Highway Yellow, Port size: #10 SAE

Hydraulic Tie-Rod Cylinder - 4" Bore X 24" Stroke - 4 X 24 2500PSI Tie-Rod Hydraulic Cylinder MFG#:DBH-4024 Bore:4"Stroke:24"R od Dia:1.5 "Retract:34.25"Por ts:1/2 NPTF Pin Dia:1" DALTON 2500PSI Tie-Rod Hydraulic Cylinder Features: Double-Acting Superior quality chrome plated polished rod Honed Finished Steel Tube High Tensile Strength Tie-Rods Top Quality Seals 4 Year Warranty Standard Color is BLACK

Hydraulic Cylinder, Double Acting Tie Rod Style, Bore Dia 2-1/2 In, Stroke 24 In, Rod Dia 1-1/8 In, Retract 34-1/4 In, Npt Port 3/8 In, Max Pressure 2500 Psi, Temp Range -20 To 220 F, Ductile Iron Piston Material, High Tensile Strength Piston Rod, Precision Honed Steel Tubes, Polypak Rod Seal, High Tensile Tie Rods, Black Finish, Includes Pins And Clips

Double-acting, double-ported welded tie rods are perfect for industrial, agricultural and contractor applications. Features chrome rod, crown piston seals with wear ring, hallite rod seals,...

Hydraulic Cylinder, Double Acting Tie Rod Style, Bore Dia 2 In, Stroke 24 In, Rod Dia 1-1/8 In, Retract 34-1/4 In, Npt Port 3/8 In, Max Pressure 2500 Psi, Temp Range -20 To 220 F, Ductile Iron Piston Material, High Tensile Strength Piston Rod, Precision Honed Steel Tubes, Polypak Rod Seal, High Tensile Tie Rods, Black Finish, Includes Pins And Clips

Category 2 Pin hole 1" Min length 24" / Max length 34.4" Cylinder bore 2.75" Rod diameter 1.378" Stroke 10.5" Double-piloted check valve Ports 3/8" BSP (Includes BSP Male to NPT Male Adaptor) Double-Acting cylinder High-Quality chrome plated & polished rod Honed & Finished Steel Tube Top Quality Seals Pressure Tested 4-Year Warranty 67852 Hydraulic Hose Kit works well with our top links

Lion Welded Hydraulic Cylinder-3000 PSI 2in Bore 24in Stroke #644807 Northern Tool Item# 992047 Item Weight: 27 lb(s) Product Information: New Double-acting, double-ported welded tie rods are perfect for industrial, agricultural and contractor applications. Features chrome rod, crown piston seals with wear ring, hallite rod seals, double lug base end, threaded rod end with ductile rod clevis and 3/4-16 ORB (SAE 8) ports inline with pins. 1in pin hole size. Complete with pins and cotter pins. Max. PSI: 3,000, Bore Diameter (in.): 2, Stroke Length (in.): 24, Closed Pin Center (in.): 34 1/4, Shaft Diameter (in.): 1 1/8 3000 PSI working pressure; 6000 PSI proof WH Series Manufacturer: Lion 3000 MPN: 644807

Oakworks - Clinician Hydraulic Lift Spa Table Oakworks Hydraulic Lift system is an easy and affordable way to make quick height adjustments without disturbing your client in the process. The Clinician Hydraulic lift is available in two different configurations. The Manual Crank system replaces the electric/hydrauli c motor with a fold away crank handle that easily lifts or lowers your client to the desired height. This is a great choice where electricity is problematic. The Electric/Hydrauli c Lift system is the most convenient way to adjust your table, allowing you to raise and lower the height with the included foot control. Your clients will appreciate the quiet motor that gently lifts them to your desired height while they continue to relax on the table. A convenient storage shelf... Less

Prince Hydraulic Tie-Rod Cylinder - B250240ABAAA07B - 2.5 X 24 3000PSI Tie-Rod Hydraulic Cylinder MFG#: 211-2524 Bore: 2.5" Stroke: 24" Rod Dia: 1.25" Retract: 34.25" Ports: #8 SAE Pin Dia: 1" PRINCE 3000PSI Tie-Rod Hydraulic Cylinder Features: Made in USA RoyalPlate Plus rod plating prevents corrosion twice as long as standard chrome plate Induction Hardened Rod / Honed Tubing Heavy-duty, high strength tie-rods Exceptional paint performance- Aircraft quality two-part paint 3/7 Warranty (see cat

Prince Welded Gladiator Hydraulic Cylinder; Bore: 5", Stroke: 24", Maximum pressure: 3000 psi, Column load: 64000 lbs, Retract: 35", Rod diameter: 2-1/2", Mounting type: Crosstube end fittings with grease zerks, Color: Highway Yellow, Port size: 3/4" NPTF

Prince Royal Line Hydraulic Cylinder - PMC-8324 - 3 X 24 Welded Cross Tube Cylinder MFG#: 218-3024 Bore: 3" Stroke: 24" Rod Dia: 1.5" Retract: 32" Ports: 1/2 NPTF Pin Dia: 1" PRINCE Royal Line Welded Cross-Tube Hydraulic Cylinder Features: 2500PSI Honed tubing Welded construction Chromed, ground polished piston rod Ductile iron piston gland Crosstube end fittings with grease zerks Urethane u-cup urethane wiper in gland O-ring with backup washers cast iron ring piston seals Truarc snap ring glan

Double-acting, double-ported welded tie rods are perfect for industrial, agricultural and contractor applications. Features chrome rod, crown piston seals with wear ring, hallite rod seals,...

Prince Hydraulic Tie-Rod Cylinder - B200240ABAAA07B - 2 X 24 3000PSI Tie-Rod Hydraulic Cylinder MFG#: 211-2024 Bore: 2" Stroke: 24" Rod Dia: 1.125" Retract: 34.25" Ports: #8 SAE Pin Dia: 1" PRINCE 3000PSI Tie-Rod Hydraulic Cylinder Features: Made in USA RoyalPlate Plus rod plating prevents corrosion twice as long as standard chrome plate Honed Tubing Heavy-duty, high strength tie-rods Exceptional paint performance- Aircraft quality two-part paint 3/7 Warranty (see catalog for full details) Stand

The LION TH3000 hydraulic tie-rod cylinder gives you the flexibility and options you need. Designed for durability and long life, this cylinder is equipped to handle higher pressure agricultural tractor and tillage applications as well as demanding industrial applications. Complete with zinc plated pins and cotters for easy installation. Max. PSI: 3,000, Bore Diameter (in.): 3 1/2, Stroke Length (in.): 24, Closed Pin Center (in.): 34 1/4, Shaft Diameter (in.): 1 1/2

Hydraulic Cylinder, Double Acting Welded Style, Bore Dia 3-1/2 In, Stroke 24 In, Rod Dia 1-3/4 In, Retract 34 In, Inlet Sae 8, Max Pressure 3000 Psi, Temp Range -20 To 220 F, Ductile Iron Piston Material, High Tensile Strength Piston Rod, Precision Honed Steel Tubes, Polypak Rod Seal, High Tensile Tie Rods, Black Finish

Teleflex Seastar 1.7 Front Mount Outboard Hydraulic Steering Kits With 24' Hoses . Easy installation, and made to fit most single/twin outboards A popular choice for unmatched comfort and control of your outboard, this steering system offers smooth and efficient steering for all hull types. Use with single outboards up to 300hp and dual outboards up to 600hp total. The kit contains a smooth front mount 1.7 c.i. displacement helm pump, semi-universal front-mount cylinder, two quarts of oil, bleeder kit and installation guide. Order the popular HK6300 kit complete with set of two 22' hoses, or purchase hoses separately. Your HO51XX hoses are available in even foot lengths. The compact helm has a 4-7/16" footprint and requires a 3" cutout. Meets ABYC standards and NMMA requirements. Maximum... Less

Hydraulic Cylinder, Double Acting Tie Rod Style, Bore Dia 4 In, Stroke 24 In, Rod Dia 1-1/2 In, Retract 34-1/4 In, Npt Port 1/2 In, Max Pressure 2500 Psi, Temp Range -20 To 220 F, Ductile Iron Piston Material, High Tensile Strength Piston Rod, Precision Honed Steel Tubes, Polypak Rod Seal, High Tensile Tie Rods, Black Finish, Includes Pins And Clips

Double-acting, double-ported welded tie rods are perfect for industrial, agricultural and contractor applications. Features chrome rod, crown piston seals with wear ring, hallite rod seals, double lug base end, threaded rod end with ductile rod clevis and 3/4-16 ORB (SAE 8) ports inline with pins. 1in pin hole size. Complete with pins and cotter pins. Max. PSI: 3,000, Bore Diameter (in.): 2, Stroke Length (in.): 24, Closed Pin Center (in.): 34 1/4, Shaft Diameter (in.): 1 1/8

Hydraulic Cylinder, Double Acting Tie Rod Style, Bore Dia 3 In, Stroke 24 In, Rod Dia 1-1/4 In, Retract 34-1/4 In, Npt Port 1/2 In, Max Pressure 2500 Psi, Temp Range -20 To 220 F, Ductile Iron Piston Material, High Tensile Strength Piston Rod, Precision Honed Steel Tubes, Polypak Rod Seal, High Tensile Tie Rods, Black Finish, Includes Pins And Clips

New Prince Manufacturing hydraulic cylinder. "Royal Line" welded construction. 2.5" Bore x 24" stroke. 3/8" NPT ports. 2500psi rated. 32" retracted pin to pin. Crosstube diameters are 3/4". Rod diameter 1 3/8"

New Prince Manufacturing hydraulic cylinder. "Sword Line" welded construction. 3" Bore x 24" stroke. 1/2" NPT ports. 3000psi rated. 34.25" retracted pin to pin. Crosstube diameters are 1". Rod is 1 3/8" diameter.

Hydraulic Cylinder, Double Acting Tie Rod Style, Bore Dia 4 In, Stroke 24 In, Rod Dia 2 In, Retract 34-1/4 In, Npt Port 1/2 In, Max Pressure 2500 Psi, Temp Range -20 To 220 F, Ductile Iron Piston Material, High Tensile Strength Piston Rod, Precision Honed Steel Tubes, Polypak Rod Seal, High Tensile Tie Rods, Black Finish, Includes Pins And Clips

Save time and money by using Kit OB BHBR hoses to connect the helm and cylinder without a remote bulkhead fitting. The inline bulkhead bend restrictors provide a water resistant through hull passage of the hoses directly from the helm to the cylinder. These hoses are recommended for use with all Uflex helms and cylinders as well as other competing systems. These are rated to 1000 Psi working pressure, but not recommended for racing applications.

TRACTOR PART NO: 214DB. HYDRAULIC CYLINDER 214DB $173.33 Pack Size - 1. PART NO: 214DB. CYLINDER, Cross hydraulic tie rod. DB non-ASAE series. 2" bore, 14" stroke, 1-1/16" shaft dia, 24-1/4" closed length, 3/8" NPTF port size, 1" pin dia., 22 wt.

Hydraulic Cylinder, Double Acting Welded Style, Bore Dia 2-1/2 In, Stroke 24 In, Rod Dia 1-1/2 In, Retract 32 In, Inlet Sae 8, Max Pressure 3000 Psi, Temp Range -20 To 220 F, Ductile Iron Piston Material, High Tensile Strength Piston Rod, Precision Honed Steel Tubes, Polypak Rod Seal, High Tensile Tie Rods, Black Finish

Prince Welded Gladiator Hydraulic Cylinder; Bore: 6", Stroke: 24", Maximum pressure: 3000 psi, Column load: 92000 lbs, Retract: 35", Rod diameter: 3", Mounting type: Crosstube end fittings with grease zerks, Color: Highway Yellow, Port size: 3/4" NPTF

Built tough for agricultural and industrial applications. 3000 PSI model is designed to withstand shock loads of up to 6000 PSI. Durable ductile iron cast components. 90 durometer O-ring seals ...