Category

Sport and Outdoor
Showing results for "22mm bullets"
Results 1 - 40 of 1500+

PTG Bullet Comparator 17, 20,...

$26.99
MidwayUSA PTG Bullet Comparator 17, 20, 22, 27, 30, 33 Calibers
+ $4.99 shipping
/ptg-bullet-comparator-17/dYmpWYY2W8QWCXKHHKgFkQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The PTG Bullet Comparator is designed to take measurements from the major diameter of a bullet to the case head rather than from the bullets tip to the case head. There are six holes that will work with each caliber listed in the description. Technical Information Fits: 17, 20, 22, 27, 30, 33 caliber bullets Function: Allows reloader to take a comparative measurement from the major diameter of a bullet to the case head Material: Steel Notes: Insert a cartridge into its correct size hole, then measure from the opposite face of the tool to the base of the cartridge. This dimension may be used to adjust seating dies so that the bullets are being seated more uniformly with respect to the bullet's ogive rather than a cartridge's overall length
More

Hornady Lock-N-Load Bullet...

$27.49
MidwayUSA Hornady Lock-N-Load Bullet Tube (40 S&W, 10mm)
+ $7.59 shipping
/hornady-locknload/2q011OBTDozgWghSsqIjeQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Features Feeds bullets into existing Hornady bullet feeder diesEliminates the need for a bullet feeder hopperMilled window in tube shows when it is almost emptySuitable for any progressive press with 7/8-14 thread die stationsFits 40 S&W, 10mm Turn any progressive press into an “ammunition factory” with the easy to use Hornady Lock-N-Load Bullet Tubes. Coupled with a Hornady Bullet Feeder die (sold separately), Lock-N-Load Bullet Tubes provide hand loaders a fast, flexible system that increases loading speed on any compatible progressive reloading press with 7/8-14 thread die-stations. With the Lock-N-Load Bullet Tubes, the hand loader can simply pre-load the tubes with bullets and place the tube in the top of their bullet feeder die. Tubes can fit 40+ bullets depending on caliber and... Less
More

RCBS Pistol Bullet Feeder Die...

$26.29
MidwayUSA RCBS Pistol Bullet Feeder Die Kit (40 S&W, 10mm Auto)
+ $7.59 shipping
/rcbs-pistol-bullet-feeder/E7pYLnAkRmTVlE65RdF8vA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
RCBS is known for making high-quality reloading equipment. The pistol bullet feeder is no exception. Each kit comes with a caliber specific die and two bullet feeding tube. These dies are standard 7/8-14 threaded dies and will fit any standard reloading press; these dies are designed to speed up the reloading process on a turret or progressive reloading press. Each clear pistol bullet feeder tube holds between 20-25 bullets depending on the bullet weight and profile. The pistol bullet feeder places the bullet into the case of the mouth with the proper alignment so the bullet can be seated at the next station. One of the great aspects of the tube pistol bullet feeder is that it is versatile. The feeder will work with any type of bullet including: jacketed, plated, solid copper and cast or... Less
More

Sinclair Bullet Sorting Stand...

$10.99
Brownells Sinclair Bullet Sorting Stand - Bullet Comparator, 22 Cal
+ $7.95 shipping
/sinclair-bullet-sorting/UEitqowznLMf6k0w9eW1FQ==/info
Brownells
IN_STOCK ( In stock )
Store not rated
The Sinclair Bullet Checker Stand allows you to quickly and accurately sort bullets by base to ogive length. Black granite base is perfectly flat and heavy enough to stay where you want it on your loading bench. The included dial indicator features lever control for easy insertion and removal of bullets into comparators and the choice of using single point or an 11mm flat indicator tips (complete dial indicator also available separately). Bullet Checker Stand Comparators sold separately and available in 22 caliber, 6mm, 6.5mm, 7mm, 30 caliber and 338 caliber or can be used with either of our hex comparators. Mfg: Sinclair International
More

RCBS Collet Bullet Puller...

$9.99
MidwayUSA RCBS Collet Bullet Puller Collet 22 Caliber (224 Diameter)
+ $4.99 shipping
/rcbs-collet-bullet-puller/EWwaAszmCktDyd8VJtxnmA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The RCBS Collet Bullet Puller is an excellent tool designed to help reloaders dismantle loaded ammunition to save valuable components. These collets are designed to easily pull out jacketed bullets without damaging them. These collets will only work with the standard RCBS Collet Bullet Puller. They are not compatible with the larger collet bullet puller designed to work in presses with 1-14 threads. Technical Information Fits: RCBS 7/8-14 thread Collet Bullet Puller Function: Collet grips the bullet as the press ram is lowered removing the bullet from the case Notes: Designed to pull jacketed bullets only
More

Forster Collet Bullet Puller...

$11.79
MidwayUSA Forster Collet Bullet Puller Collet 22 Caliber (224 Diameter)
+ $4.99 shipping
/forster-collet-bullet/aYobh9DM825_0drSmFRjEQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Forster Collet Style Bullet Puller is carefully constructed out of solid steel that provides the precision to carefully pull bullets from brass cases. Once the collet is inserted into the bullet puller the reloader turns the handle on the puller that tightens the collet against the bullet. The reloader lifts the ram down and the bullet is in the collet. Release the pressure from the collet and the bullet will drop free. Not designed to use on lead bullets. Technical Information Fits: Forster Collet Bullet Puller Function: Collet that clamps down on bullet to remove it from the brass case Material: Steel Notes: Collet only, Bullet puller sold separately (Item 419-303), Bullet Diameter the collet is designed to pull is located in the description
More

Redding Bullet Seating...

$39.49
MidwayUSA Redding Bullet Seating Micrometer #9084 (222 Remington, 22 PPC, 223 WSSM)
+ $4.99 shipping
/redding-bullet-seating/5OuHHIaDXevJpQXJvuHSrw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding Bullet Seating Micrometers are the perfect addition to any bullet seating die that utilizes 1/2-20 threads. For years Redding Competition Seating Dies have been known as one of the most accurate seating dies made because of their bullet seating micrometer that allows reloaders to fine tune seating depths to the most accurate for their load. These plugs are machined from quality steel alloy and hand finished and inspected to ensure the consistent, reliable performance. These seaters are a direct replacement for the original seating plugs and can easily be changed from one die to the next. There are two different micrometers available one for standard bullets that will work for most bullets including polymer tipped bullets and one that is designed specifically for VLD bullets... Less
More

Redding Bullet Seating...

$39.49
MidwayUSA Redding Bullet Seating Micrometer #9083 (223 Remington, 22-250 Remington, 220 Swift)
+ $4.99 shipping
/redding-bullet-seating/Au6xFM8yx83H3UOnx53Uiw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding Bullet Seating Micrometers are the perfect addition to any bullet seating die that utilizes 1/2-20 threads. For years Redding Competition Seating Dies have been known as one of the most accurate seating dies made because of their bullet seating micrometer that allows reloaders to fine tune seating depths to the most accurate for their load. These plugs are machined from quality steel alloy and hand finished and inspected to ensure the consistent, reliable performance. These seaters are a direct replacement for the original seating plugs and can easily be changed from one die to the next. There are two different micrometers available one for standard bullets that will work for most bullets including polymer tipped bullets and one that is designed specifically for VLD bullets... Less
More

Whidden Gunworks Bullet...

$42.00
MidwayUSA Whidden Gunworks Bullet Pointing Die Caliber Sleeve 22 Caliber (224 Diameter)
+ $4.99 shipping
/whidden-gunworks-bullet/q3skHm_IKde1Vaxn39CnEA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Whidden Gunworks Bullet Pointing Die System is the perfect tool to point the tip of rifle bullets for long range competition. Developed by John Whidden, accomplished long range marksmen, to not only increase a bullets ballistic coefficient (making them more aerodynamic) but also increasing the consistency of reloaded ammunition. In fact many of the best long range shooters point their competition bullets to increase consistency of loaded ammunition to help produce the most consistent handloads available. Pointing bullets is simple, all a reloader has to do is run the bullet into the die and it is tipped, only adding a few moments to any reloading sequence. The Whidden Bullet Pointing Die System no longer uses a spring. The spring has been replaced by an internal sleeve which is... Less
More

Redding Bullet Seating...

$39.49
MidwayUSA Redding Bullet Seating Micrometer #9085 (17 Remington, 204 Ruger, 22 Hornet)
+ $4.99 shipping
/redding-bullet-seating/wyVIFe4XQZDEDFCKKfzukw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding Bullet Seating Micrometers are the perfect addition to any bullet seating die that utilizes 1/2-20 threads. For years Redding Competition Seating Dies have been known as one of the most accurate seating dies made because of their bullet seating micrometer that allows reloaders to fine tune seating depths to the most accurate for their load. These plugs are machined from quality steel alloy and hand finished and inspected to ensure the consistent, reliable performance. These seaters are a direct replacement for the original seating plugs and can easily be changed from one die to the next. There are two different micrometers available one for standard bullets that will work for most bullets including polymer tipped bullets and one that is designed specifically for VLD bullets... Less
More

Hornady Custom Grade New...

$16.99
MidwayUSA Hornady Custom Grade New Dimension Bullet Seater Die 40 S&W, 10mm Auto
+ $4.99 shipping
/hornady-custom-grade-new/1ia99mzwpkMPSfPkJmqS9Q==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Hornady Custom Grade New Dimension Seater Die is a great die for the avid reloader. The CGND Seater Die will improve your bullet seating and accuracy with its floating bullet alignment sleeve and stem. The floating sleeve is designed to align the bullet and case prior to seating, preventing any deformations on the base of the bullet. The Seater Die features a roll crimp. For the ultimate accuracy and precision, you can add the Hornady Microjust Seating Stem (sold separately #394708) to create your own Micrometer Seating Die! The CGND Seater Die is also compatible with popular bullets like the A-Max and FTX bullet lines with the addition of the appropriate Hornady Die Seater Stem (sold separately). Shellholder sold separately. Technical InformationMateri al: Steel Die Type: Seating Die... Less
More

L.E. Wilson Chamber Type...

$22.99
MidwayUSA L.E. Wilson Chamber Type Seater Die VLD Bullet Seating Plug Drift Assembly 22 Caliber
+ $4.99 shipping
/le-wilson-chamber-type/uOdO0khwllWRvboZNQ1vEw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
L.E. Wilson has been making precision reloading tools for over 80 years. Chamber Type Seater Dies are noted for precise accuracy. Both the bullet and case are firmly held in perfect alignment as the bullet is seated in the case. The VLD bullet seating plug drift assembly is a special seating plug and assembly that is designed for seating todays most popular VLD bullets. Technical InformationMateri al: Steel Fits: L.E. Wilson Chamber Type Seating Dies Function: VLD Bullet Seating Plug Drift Assembly Material: Steel Notes: This is a drop in part that replaces the factory stem
More

Hornady Lock-N-Load Bullet...

$27.49
MidwayUSA Hornady Lock-N-Load Bullet Tube 9mm Luger
+ $7.59 shipping
/hornady-locknload/-R395F8U1RI94ytTsdAHlQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Features Feeds bullets into existing Hornady bullet feeder diesEliminates the need for a bullet feeder hopperMilled window in tube shows when it is almost emptySuitable for any progressive press with 7/8-14 thread die stationsFits 45 ACP Turn any progressive press into an “ammunition factory” with the easy to use Hornady Lock-N-Load Bullet Tubes. Coupled with a Hornady Bullet Feeder die (sold separately), Lock-N-Load Bullet Tubes provide hand loaders a fast, flexible system that increases loading speed on any compatible progressive reloading press with 7/8-14 thread die-stations. With the Lock-N-Load Bullet Tubes, the hand loader can simply pre-load the tubes with bullets and place the tube in the top of their bullet feeder die. Tubes can fit 40+ bullets depending on caliber and weight... Less
More

Forster Collet Bullet Puller...

$11.79
MidwayUSA Forster Collet Bullet Puller Collet 35 Caliber, 9mm (357 Diameter)
+ $4.99 shipping
/forster-collet-bullet/-jdNHrCH6_IBJBP1ot7NRQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Forster Collet Style Bullet Puller is carefully constructed out of solid steel that provides the precision to carefully pull bullets from brass cases. Once the collet is inserted into the bullet puller the reloader turns the handle on the puller that tightens the collet against the bullet. The reloader lifts the ram down and the bullet is in the collet. Release the pressure from the collet and the bullet will drop free. Not designed to use on lead bullets. Technical Information Fits: Forster Collet Bullet Puller Function: Collet that clamps down on bullet to remove it from the brass case Material: Steel Notes: Collet only, Bullet puller sold separately (Item 419-303), Designed to work with 9mm
More

RCBS Collet Bullet Puller...

$9.99
MidwayUSA RCBS Collet Bullet Puller Collet 40 Caliber, 10mm (400 Diameter)
+ $4.99 shipping
/rcbs-collet-bullet-puller/lrvD2vNDRJtHNHBmTtx_pA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The RCBS Collet Bullet Puller is an excellent tool designed to help reloaders dismantle loaded ammunition to save valuable components. These collets are designed to easily pull out jacketed bullets without damaging them. These collets will only work with the standard RCBS Collet Bullet Puller. They are not compatible with the larger collet bullet puller designed to work in presses with 1-14 threads. Technical Information Fits: RCBS 7/8-14 thread Collet Bullet Puller Function: Collet grips the bullet as the press ram is lowered removing the bullet from the case Notes: Designed to pull jacketed bullets only
More

MCR Bullet Meplat Uniforming...

$99.99
MidwayUSA MCR Bullet Meplat Uniforming Tool 243 Caliber, 6mm
+ $4.99 shipping
/mcr-bullet-meplat/4vXUwxy7bpmPQA5Oa6n5Mg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This tool allows the reloader to remove the unevenness in the nose of the bullet. This results in consistent projectiles, tighter groups and increased long range consistency. One-piece, stainless steel tool works for any weight bullet in the assigned calibers to create a burr free hollow point with no damage done to the bullet. Used by some of the top shooters in the world for 1,000 yard bench-rest, high power and long range hunting. Technical Information Notes: consists of a caliber-specific tool body, a cutter and a hollow-point deburring tool Information from the manufacturer: Montour County Rifles Meplat Uniforming Tool allows the re-loader to equalize the ballistic coefficient (B.C.) of any kind weight bullet. This is done by removing the uneveness of a bullets meplat. (the nose of... Less
More

RCBS Collet Bullet Puller...

$9.99
MidwayUSA RCBS Collet Bullet Puller Collet 284 Caliber, 7mm (284 Diameter)
+ $4.99 shipping
/rcbs-collet-bullet-puller/BE3vsgRBvxDgslHKAV_DRA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The RCBS Collet Bullet Puller is an excellent tool designed to help reloaders dismantle loaded ammunition to save valuable components. These collets are designed to easily pull out jacketed bullets without damaging them. These collets will only work with the standard RCBS Collet Bullet Puller. They are not compatible with the larger collet bullet puller designed to work in presses with 1-14 threads. Technical Information Fits: RCBS 7/8-14 thread Collet Bullet Puller Function: Collet grips the bullet as the press ram is lowered removing the bullet from the case Notes: Designed to pull jacketed bullets only
More

RCBS Collet Bullet Puller...

$9.99
MidwayUSA RCBS Collet Bullet Puller Collet 24 Caliber, 6mm (243 Diameter)
+ $4.99 shipping
/rcbs-collet-bullet-puller/dIf2AaLHsDyJ8NItz3h0rA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The RCBS Collet Bullet Puller is an excellent tool designed to help reloaders dismantle loaded ammunition to save valuable components. These collets are designed to easily pull out jacketed bullets without damaging them. These collets will only work with the standard RCBS Collet Bullet Puller. They are not compatible with the larger collet bullet puller designed to work in presses with 1-14 threads. Technical Information Fits: RCBS 7/8-14 thread Collet Bullet Puller Function: Collet grips the bullet as the press ram is lowered removing the bullet from the case Notes: Designed to pull jacketed bullets only
More

RCBS Collet Bullet Puller...

$9.99
MidwayUSA RCBS Collet Bullet Puller Collet 32 Caliber, 8mm (323 Diameter)
+ $4.99 shipping
/rcbs-collet-bullet-puller/gVjdAUOkAc0a-YUN5j6ZDQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The RCBS Collet Bullet Puller is an excellent tool designed to help reloaders dismantle loaded ammunition to save valuable components. These collets are designed to easily pull out jacketed bullets without damaging them. These collets will only work with the standard RCBS Collet Bullet Puller. They are not compatible with the larger collet bullet puller designed to work in presses with 1-14 threads. Technical Information Fits: RCBS 7/8-14 thread Collet Bullet Puller Function: Collet grips the bullet as the press ram is lowered removing the bullet from the case Notes: Designed to pull jacketed bullets only
More

RCBS Collet Bullet Puller...

$9.99
MidwayUSA RCBS Collet Bullet Puller Collet 26 Caliber, 6.5mm (264 Diameter)
+ $4.99 shipping
/rcbs-collet-bullet-puller/i8yjnisAUeyC_oxw9VosNA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The RCBS Collet Bullet Puller is an excellent tool designed to help reloaders dismantle loaded ammunition to save valuable components. These collets are designed to easily pull out jacketed bullets without damaging them. These collets will only work with the standard RCBS Collet Bullet Puller. They are not compatible with the larger collet bullet puller designed to work in presses with 1-14 threads. Technical Information Fits: RCBS 7/8-14 thread Collet Bullet Puller Function: Collet grips the bullet as the press ram is lowered removing the bullet from the case Notes: Designed to pull jacketed bullets only
More

Forster Collet Bullet Puller...

$11.79
MidwayUSA Forster Collet Bullet Puller Collet 26 Caliber, 6.5mm (264 Diameter)
+ $4.99 shipping
/forster-collet-bullet/mxcgRdTMonHepapdtAHamw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Forster Collet Style Bullet Puller is carefully constructed out of solid steel that provides the precision to carefully pull bullets from brass cases. Once the collet is inserted into the bullet puller the reloader turns the handle on the puller that tightens the collet against the bullet. The reloader lifts the ram down and the bullet is in the collet. Release the pressure from the collet and the bullet will drop free. Not designed to use on lead bullets. Technical Information Fits: Forster Collet Bullet Puller Function: Collet that clamps down on bullet to remove it from the brass case Material: Steel Notes: Collet only, Bullet puller sold separately (Item 419-303), Bullet Diameter the collet is designed to pull is located in the description
More

RCBS Collet Bullet Puller...

$9.99
MidwayUSA RCBS Collet Bullet Puller Collet 35 Caliber, 9mm (357 Diameter)
+ $4.99 shipping
/rcbs-collet-bullet-puller/q_Oll8jYKOju0iXdNyTWfw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The RCBS Collet Bullet Puller is an excellent tool designed to help reloaders dismantle loaded ammunition to save valuable components. These collets are designed to easily pull out jacketed bullets without damaging them. These collets will only work with the standard RCBS Collet Bullet Puller. They are not compatible with the larger collet bullet puller designed to work in presses with 1-14 threads. Technical Information Fits: RCBS 7/8-14 thread Collet Bullet Puller Function: Collet grips the bullet as the press ram is lowered removing the bullet from the case Notes: Designed to pull jacketed bullets only
More

Hornady Lock-N-Load Bullet...

$27.49
MidwayUSA Hornady Lock-N-Load Bullet Feeder Bullet Feeding Die (40 S&W, 10mm Auto)
+ $4.99 shipping
/hornady-locknload/RA61hx6L2NEp-JNKcrmBpw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Hornady Lock-N-Load Progressive Press Bullet Feeder Dies are specifically designed to work with the Hornady Lock-N-Load Progressive Press Bullet Feeder. The Lock-N-Load Bullet Feeder is designed to work with any progressive press with standard 7/8-14 die threads and has been found to increase reloading speed up to 50%. These feeder dies are case activated, meaning a bullet will only be fed upon contact with the case. The collets are constructed of solid steel and are durable enough for years of reloading. Technical Information Dies Included: Lock-N-Load Bullet Feeding Die Die Size: 7/8-14 threads Notes: Works with standard progressive press when using the Hornady Lock-N-Load Bullet Feeder Hornady Lock-N-Load bushing shown on the die in the picture is not included
More

Hornady Lock n Load...

$13.40
Walmart.com Hornady Lock n Load Comparator 1pc Bullet Insert, No 22 - .224 / 5.56mm -
Free Shipping
/hornady-lock-n-load/6-1H4ewqH9mmzuA2WrZlrw==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
We apologize for the inconvenience, but at this time we are unable to export this product outside of the USA.Looking for Reloading Equipment? Hornady Lock n Load Comparator 1pc Bullet Insert, No 22 - .224 / 5.56mm - delivers great quality for a great price. All of the features you need for a price you want from Hornady. Don't look further for Reloading Equipment. Hornady Lock n Load Comparator 1pc Bullet Insert, No 22 - .224 / 5.56mm - has everything you've been looking for.
More

Redding VLD Bullet Seating...

$39.49
MidwayUSA Redding VLD Bullet Seating Micrometer #9183 (223 Remington, 22-250 Remington, 220 Swift)
+ $4.99 shipping
/redding-vld-bullet/BmJfkCTpFZxcueK8rVglwQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding Bullet Seating Micrometers are the perfect addition to any bullet seating die that utilizes 1/2-20 threads. For years Redding Competition Seating Dies have been known as one of the most accurate seating dies made because of their bullet seating micrometer that allows reloaders to fine tune seating depths to the most accurate for their load. These plugs are machined from quality steel alloy and hand finished and inspected to ensure the consistent, reliable performance. These seaters are a direct replacement for the original seating plugs and can easily be changed from one die to the next. There are two different micrometers available one for standard bullets that will work for most bullets including polymer tipped bullets and one that is designed specifically for VLD bullets... Less
More

Redding VLD Bullet Seating...

$39.49
MidwayUSA Redding VLD Bullet Seating Micrometer #9185 (17 Remington, 204 Ruger, 22 Hornet)
+ $4.99 shipping
/redding-vld-bullet/OjDz_Ma3wzud3N3xA-jA9g==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding Bullet Seating Micrometers are the perfect addition to any bullet seating die that utilizes 1/2-20 threads. For years Redding Competition Seating Dies have been known as one of the most accurate seating dies made because of their bullet seating micrometer that allows reloaders to fine tune seating depths to the most accurate for their load. These plugs are machined from quality steel alloy and hand finished and inspected to ensure the consistent, reliable performance. These seaters are a direct replacement for the original seating plugs and can easily be changed from one die to the next. There are two different micrometers available one for standard bullets that will work for most bullets including polymer tipped bullets and one that is designed specifically for VLD bullets... Less
More

Whidden Gunworks Bullet...

$42.00
MidwayUSA Whidden Gunworks Bullet Pointing Die Caliber Sleeve 284 Caliber, 7mm (284 Diameter)
+ $4.99 shipping
/whidden-gunworks-bullet/IJc36CAb0iDhb0e7HHaJxw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Whidden Gunworks Bullet Pointing Die System is the perfect tool to point the tip of rifle bullets for long range competition. Developed by John Whidden, accomplished long range marksmen, to not only increase a bullets ballistic coefficient (making them more aerodynamic) but also increasing the consistency of reloaded ammunition. In fact many of the best long range shooters point their competition bullets to increase consistency of loaded ammunition to help produce the most consistent handloads available. Pointing bullets is simple, all a reloader has to do is run the bullet into the die and it is tipped, only adding a few moments to any reloading sequence. The Whidden Bullet Pointing Die System no longer uses a spring. The spring has been replaced by an internal sleeve which is... Less
More

Berger Target Bullets -...

$28.99
Brownells Berger Target Bullets - Berger 22 Cal 55 Gr Match Target Bullets - 100
+ $7.95 shipping
/berger-target-bullets/vfC9gRxC43ka8XiKMOMkiw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
The Berger Target bullet line is made up of the many legendary bullets that have been winning matches and setting records for decades. Berger Bullets was started because Walt Berger wanted better results while competing in target shooting matches. Making Match Grade bullets for target competition shooters is Berger's core competency. All of Berger's success as the producer of consistent bullets for Varmint, Target and Hunting stems from the efforts Berger has made to produce the best bullets available for the extreme, precision focused, target competition shooter. Mfg: Berger Bullets
More

Hornady Custom Grade New...

$21.49
MidwayUSA Hornady Custom Grade New Dimension Bullet Seater Die 9mm Luger, 380 ACP, 38 Super
+ $4.99 shipping
/hornady-custom-grade-new/sqMH-n8Ftbp2BzQUiCgq5w==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Hornady Custom Grade New Dimension Seater Die is a great die for the avid reloader. The CGND Seater Die will improve your bullet seating and accuracy with its floating bullet alignment sleeve and stem. The floating sleeve is designed to align the bullet and case prior to seating, preventing any deformations on the base of the bullet. The Seater Die features a roll crimp. For the ultimate accuracy and precision, you can add the Hornady Microjust Seating Stem (sold separately #394708) to create your own Micrometer Seating Die! The CGND Seater Die is also compatible with popular bullets like the A-Max and FTX bullet lines with the addition of the appropriate Hornady Die Seater Stem (sold separately). Shellholder sold separately. Technical InformationMateri al: Steel Die Type: Seating Die... Less
More

Hornady Custom Grade New...

$16.99
MidwayUSA Hornady Custom Grade New Dimension Bullet Seater Die 6.8mm Remington SPC
+ $4.99 shipping
/hornady-custom-grade-new/f2omeaKDNGKEyc55uqvZrg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Hornady Custom Grade New Dimension Seater Die is a great die for the avid reloader. The CGND Seater Die will improve your bullet seating and accuracy with its floating bullet alignment sleeve and stem. The floating sleeve is designed to align the bullet and case prior to seating, preventing any deformations on the base of the bullet. The Seater Die features a roll crimp. For the ultimate accuracy and precision, you can add the Hornady Microjust Seating Stem (sold separately #394708) to create your own Micrometer Seating Die! The CGND Seater Die is also compatible with popular bullets like the A-Max and FTX bullet lines with the addition of the appropriate Hornady Die Seater Stem (sold separately). Shellholder sold separately. Technical InformationMateri al: Steel Die Type: Seating Die... Less
More

Hornady Custom Grade New...

$21.49
MidwayUSA Hornady Custom Grade New Dimension Bullet Seater Die 7.62x39mm
+ $4.99 shipping
/hornady-custom-grade-new/koBqVSfaqiNydMGh_RT7Vw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Hornady Custom Grade New Dimension Seater Die is a great die for the avid reloader. The CGND Seater Die will improve your bullet seating and accuracy with its floating bullet alignment sleeve and stem. The floating sleeve is designed to align the bullet and case prior to seating, preventing any deformations on the base of the bullet. The Seater Die features a roll crimp. For the ultimate accuracy and precision, you can add the Hornady Microjust Seating Stem (sold separately #394708) to create your own Micrometer Seating Die! The CGND Seater Die is also compatible with popular bullets like the A-Max and FTX bullet lines with the addition of the appropriate Hornady Die Seater Stem (sold separately). Shellholder sold separately. Technical InformationMateri al: Steel Die Type: Seating Die... Less
More

Hornady Custom Grade New...

$21.49
MidwayUSA Hornady Custom Grade New Dimension Bullet Seater Die 280 Remington, 7mm Express
+ $4.99 shipping
/hornady-custom-grade-new/uSY1fdwLdKSR1K7mV39wmg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Hornady Custom Grade New Dimension Seater Die is a great die for the avid reloader. The CGND Seater Die will improve your bullet seating and accuracy with its floating bullet alignment sleeve and stem. The floating sleeve is designed to align the bullet and case prior to seating, preventing any deformations on the base of the bullet. The Seater Die features a roll crimp. For the ultimate accuracy and precision, you can add the Hornady Microjust Seating Stem (sold separately #394708) to create your own Micrometer Seating Die! The CGND Seater Die is also compatible with popular bullets like the A-Max and FTX bullet lines with the addition of the appropriate Hornady Die Seater Stem (sold separately). Shellholder sold separately. Technical InformationMateri al: Steel Die Type: Seating Die... Less
More

Hornady Lock-N-Load...

$382.99
MidwayUSA Hornady Lock-N-Load Progressive Press Bullet Feeder Kit 22 Caliber 110 Volt
+ $14.99 shipping
/hornady-locknload/kpf6A_0gk9Rs4zu_wxEphA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Hornady Lock-N-Load Progressive Progressive Press Rifle Bullet Feeder Kit is sold as a complete unit for 22 caliber bullets, a conversion kit for 30 caliber bullets is also available, giving the reloader the versatility to load the two most popular calibers. Plus, it's compatible with other presses and uses the industry standard 7/8-14 die threads. Coupled with the Lock-N-Load Case Feeder, you'll realize dramatic increases in efficiency and reloading speed, up to 50% faster! The Bullet Feeder Die is case activated; the bullet will only feed upon contact with the case. One station is used to feed, seat and crimp the bullet.
More

Hornady Custom Grade New...

$21.49
MidwayUSA Hornady Custom Grade New Dimension Bullet Seater Die 22 Hornet, 222 Remington, 223 Remington, 22-250 Remington
+ $4.99 shipping
/hornady-custom-grade-new/v6jk38f4Kc7UWl9OcaJMZg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Hornady Custom Grade New Dimension Seater Die is a great die for the avid reloader. The CGND Seater Die will improve your bullet seating and accuracy with its floating bullet alignment sleeve and stem. The floating sleeve is designed to align the bullet and case prior to seating, preventing any deformations on the base of the bullet. The Seater Die features a roll crimp. For the ultimate accuracy and precision, you can add the Hornady Microjust Seating Stem (sold separately #394708) to create your own Micrometer Seating Die! The CGND Seater Die is also compatible with popular bullets like the A-Max and FTX bullet lines with the addition of the appropriate Hornady Die Seater Stem (sold separately). Shellholder sold separately. Technical InformationMateri al: Steel Die Type: Seating Die... Less
More

RCBS Collet Bullet Puller...

$9.99
MidwayUSA RCBS Collet Bullet Puller Collet 36 Caliber, 9.3mm (366 Diameter)
+ $4.99 shipping
/rcbs-collet-bullet-puller/Bqu4iqTyiWVVqoZwyTLrVg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The RCBS Collet Bullet Puller is an excellent tool designed to help reloaders dismantle loaded ammunition to save valuable components. These collets are designed to easily pull out jacketed bullets without damaging them. These collets will only work with the standard RCBS Collet Bullet Puller. They are not compatible with the larger collet bullet puller designed to work in presses with 1-14 threads. Technical Information Fits: RCBS 7/8-14 thread Collet Bullet Puller Function: Collet grips the bullet as the press ram is lowered removing the bullet from the case Notes: Designed to pull jacketed bullets only
More

Redding Bullet Seating...

$39.49
MidwayUSA Redding Bullet Seating Micrometer #9067 (243 Winchester, 7mm Remington Magnum, 284 Winchester)
+ $4.99 shipping
/redding-bullet-seating/BE0BYeQjssRB95sWCRufTg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding Bullet Seating Micrometers are the perfect addition to any bullet seating die that utilizes 1/2-20 threads. For years Redding Competition Seating Dies have been known as one of the most accurate seating dies made because of their bullet seating micrometer that allows reloaders to fine tune seating depths to the most accurate for their load. These plugs are machined from quality steel alloy and hand finished and inspected to ensure the consistent, reliable performance. These seaters are a direct replacement for the original seating plugs and can easily be changed from one die to the next. There are two different micrometers available one for standard bullets that will work for most bullets including polymer tipped bullets and one that is designed specifically for VLD bullets... Less
More

RCBS Pistol Bullet Feeder Die...

$26.29
MidwayUSA RCBS Pistol Bullet Feeder Die Kit (380 ACP, 9mm Luger, 38 Special, 357 Magnum) 90 to 158 Grain Bullets
+ $7.59 shipping
/rcbs-pistol-bullet-feeder/HKNKbfbx_5Wbhb12MdNamQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
RCBS is known for making high-quality reloading equipment. The pistol bullet feeder is no exception. Each kit comes with a caliber specific die and two bullet feeding tube. These dies are standard 7/8-14 threaded dies and will fit any standard reloading press; these dies are designed to speed up the reloading process on a turret or progressive reloading press. Each clear pistol bullet feeder tube holds between 20-25 bullets depending on the bullet weight and profile. The pistol bullet feeder places the bullet into the case of the mouth with the proper alignment so the bullet can be seated at the next station. One of the great aspects of the tube pistol bullet feeder is that it is versatile. The feeder will work with any type of bullet including: jacketed, plated, solid copper and cast or... Less
More

L.E. Wilson Chamber Type...

$22.99
MidwayUSA L.E. Wilson Chamber Type Seater Die VLD Bullet Seating Plug Drift Assembly 284 Caliber, 7mm
+ $4.99 shipping
/le-wilson-chamber-type/PHuK01xif2JC6NGZsvflfQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
L.E. Wilson has been making precision reloading tools for over 80 years. Chamber Type Seater Dies are noted for precise accuracy. Both the bullet and case are firmly held in perfect alignment as the bullet is seated in the case. The VLD bullet seating plug drift assembly is a special seating plug and assembly that is designed for seating todays most popular VLD bullets. Technical InformationMateri al: Steel Fits: L.E. Wilson Chamber Type Seating Dies Function: VLD Bullet Seating Plug Drift Assembly Material: Steel Notes: This is a drop in part that replaces the factory stem
More

Hornady Custom Grade New...

$16.99
MidwayUSA Hornady Custom Grade New Dimension Bullet Seater Die 8x57mm Mauser (8mm Mauser)
+ $4.99 shipping
/hornady-custom-grade-new/cO_ifKieULTapD0p72FlKQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Hornady Custom Grade New Dimension Seater Die is a great die for the avid reloader. The CGND Seater Die will improve your bullet seating and accuracy with its floating bullet alignment sleeve and stem. The floating sleeve is designed to align the bullet and case prior to seating, preventing any deformations on the base of the bullet. The Seater Die features a roll crimp. For the ultimate accuracy and precision, you can add the Hornady Microjust Seating Stem (sold separately #394708) to create your own Micrometer Seating Die! The CGND Seater Die is also compatible with popular bullets like the A-Max and FTX bullet lines with the addition of the appropriate Hornady Die Seater Stem (sold separately). Shellholder sold separately. Technical InformationMateri al: Steel Die Type: Seating Die... Less
More

Hornady Custom Grade New...

$9.99
MidwayUSA Hornady Custom Grade New Dimension Die Seater Stem 7mm A-Max Bullet
+ $4.99 shipping
/hornady-custom-grade-new/OMafJZ4Rygto7vm6lj6yZw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Hornady Custom Grade New Dimension Die Seater Stem is the perfect addition for the reloader utilizing specialty Hornady bullets like the popular FTX bullet or the super accurate A-Max bullet. Simply remove the standard seating stem from your Custom Grade New Dimension Seating Die and install the new stem. The die stems will only work with Hornady Custom Grade New Dimension Seating Dies, and caliber listed in description. Technical Information Fits: Hornady Custom Grade New Dimension Seat Dies Material: Steel Notes: Replaces the seating stem in a Hornady New Dimension Seating die For use with the listed caliber and bullet type only Features Hornady's No-Risk Lifetime Warranty
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2016 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe148.2015.sp24.rm.reviews-30335
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe148.2015.sp24.rm.reviews-30335