Functional Race Wing. Steeda's premium Functional Race Wing combines aerodynamic theory, track testing and modern styling. This results in a great looking yet multifunctional wing that has effective high-speed rear down force, improved stability and minimal wind drag. Direct Bolt On. Steeda designed this rear wing spoiler to be a direct bolt-on replacement to your Mustangs stock factory spoiler, so there is no additional body work or holes to be drilled or filled for installation. High Quality Material. Constructed from a poly-resin fiberglass, this Steeda Wing is durable and can be painted at any local body shop to match your Mustang. Also includes fiberglass winglets that can be painted to match as well. Recommended Styling Upgrade. If you are looking to dress up your new wing to... Less

Increases Horsepower and Torque. The biggest "bang for the buck" modification that anyone can make to their V6 Mustang is adding a Steeda cold air intake. Steeda's uniquely designed CAI allows your pony to breathe easier which translates into a significant increase of 16 to 20 more horsepower at the rear wheels. Reusable High Flow Air Filter. The included Steeda dual cone air filter has more surface area than competitors single cone filters to allow your Pony to breath much easier for more power. And best of all the filter is reusable, just clean it, re-oil it, save money and go. Stainless Steel Heat Shield. Steeda knows that hot air is bad for combustion. That's why they have included a heat shield made from 304 stainless steel to reduce the intake temperature to within 5-10 degrees of... Less

Steeda Autosports 555-8206 Lowering Springs, Front and Rear, Black Powdercoated, Ford, Mustang, Kit Please hover mouse to enlarge image Steeda 555-8206 Steeda Ultra-Lite Spring Kit Bushings Included No Progressive Rate Spring No Quantity Sold as a set of 4. Spring Finish Black powdercoated Spring Position Front and rear Spring Type Coil Image is a representation of this part. Actual part may vary. Summit Racing Part Number : SDA-555-8206 Fitment P lease see the "Compatibility" link at the top o

Gain 10+ HP. Replace your restrictive factory charge motion control plates with Steeda's free-flowing plates and enjoy more power and torque. These high performance plates add horsepower and torque in the mid to upper RPM ranges without sacrificing low end torque for the kind of tire-frying power you can feel. Peak gains of up to 10 horsepower have been seen on naturally aspirated Mustangs, and more power is possible from supercharged engines. Designed to Perform. As used on Steeda's Q335 Mustang, these plates are 0.070 thicker than the factory plates and are a better port match to the intake manifold and cylinder heads than your OE plates to untap hidden horsepower. They also delete the factory butterfly flow control to reduce turbulence and increase airflow - and as everyone knows, more... Less

Increases Horsepower and Torque. The biggest "bang for the buck" modification that anyone can make to their V6 Mustang is adding a Steeda cold air intake. Steeda's uniquely designed CAI allows your pony to breathe easier which translates into a significant increase of 16 to 20 more horsepower at the rear wheels. Reusable High Flow Air Filter. The included Steeda dual cone air filter has more surface area than competitors single cone filters to allow your Pony to breath much easier for more power. And best of all the filter is reusable, just clean it, re-oil it, save money and go. Stainless Steel Heat Shield. Steeda knows that hot air is bad for combustion. That's why they have included a heat shield made from 304 stainless steel to reduce the intake temperature to within 5-10 degrees of... Less

Lowering Springs, Front and Rear, Black Powdercoated, Ford, Mustang, Kit Please hover mouse to enlarge image Steeda Autosports Competition Spring 555-8241 Bushings Included No Progressive Rate Spring No Quantity Sold as a set of 4. Spring Finish Black powdercoated Spring Position Front and rear Spring Type Coil Image is a representation of this part. Actual part may vary. Summit Racing Part Number : SDA-555-8241 Fitment P lease see the "Compatibility" link at the top of the listing. Fitment inf

Improves Handling. Upgrade your Mustangs wimpy stock factory rear sway bar to a 1-1/4" Steeda adjustable rear sway bar for superior handling, flatter cornering and better stability. Adjustable. This Steeda Rear Sway Bar features three (3) adjustment positions for fine tuning the handling balance of your Pony to suit your driving needs from mild to wild. Quality Materials. Made in the USA from 1.25" diameter tubular steel for extra strength this Steeda Rear Sway Bar is completed in a blue powdercoated finish for great looks and long life. Application. This Steeda Adjustable Rear Sway Bar is designed to fit the 2005 to 2013 Mustang Coupes, including the V6, GT, Bullitt and Shelby GT500 models. Does not fit convertible.

Improves Handling. Upgrade your heavy stock factory sway bar to a light weight Steeda unit for superior handling, flatter cornering and better stability. Adjustable. This Steeda Front Sway Bar features three (3) adjustment positions for fine tuning the handling balance of your Pony to suite your driving needs from mild to wild. Quality Materials. The Steeda Sway Bar is made from 1.375" diameter tubular steel for extra strength and is completed in a blue powdercoated finish for great looks and long life. Additional features includes Steeda's unique and patented welded billet ends, instead of stamping the ends like lesser designs. Fitment. The Steeda Heavy Duty Adjustable Front Sway Bar is designed to fit the 2005 to 2010 V6, GT, and GT500 Ford Mustang.

Designed For Optimum Handling. Steeda's X5 Ball Joint will greatly improve the suspension geometry on your lowered Mustang by raising the spindle relative to the pivot-point of the ball joint. This raises the roll center back into the correct range, resulting in reduced body roll, quicker steering response and improved overall front tire grip. Tested In Extreme Conditions. The X5 ball joints are made in the USA to Steeda's strict specifications by a respected name-brand supplier to Ford, GM, and Chrysler. Except for their unique custom length, these ball joints are constructed from the the same OEM materials that have been extensively tested in Ford police cars and other heavy duty service vehicles, where they have far exceeded the durability of current production "stock" ball joints... Less

Increases Horsepower and Torque. The biggest "bang for the buck" modification that anyone can make to their GT or Bullitt Mustang is adding a Steeda cold air intake. Steeda's uniquely designed 90mm CAI allows your pony to breathe easier which translates into a significant increase of 38 horsepower, 30 ft lbs of torque at the rear wheels. Superior Airflow. Designed for superior airflow the Steeda Cold Air Intake Kit features a high-flow plastic inlet elbow and rechargeable air filter to ensure optimum airflow for better throttle response and more power. Reusable High Flow Air Filter. The included Steeda dual cone air filter has more surface area than competitors single cone filters to allow your Pony to breath much easier for more power. And best of all the filter is reusable, just clean... Less

Improves Handling. Limit g-loading on your 2005 to 2012 Mustang for better handling and attack even hairpin turns with confidence with a Steeda rear shock tower brace. By reinforcing your rear strut towers, you'll stiffen up your chassis and improve traction for better, faster, crisper handling. Made to Perform. Like all of Steeda's products, this shock tower brace is made to the highest standards to guarantee performance. Constructed of 4130 chromoly steel and finished with a durable zinc plate, this brace gives your trunk area a no-nonsense look. Stainless steel hardware and Teflon lined rod ends included. Perfect with Coilovers. If you're adding coilovers, high performance shocks, or an IRS rear to your Pony, a shock tower brace will help you get the most from your new suspension... Less

Improves Handling. Upgrade your Mustangs wimpy stock factory rear sway bar to a 1-1/4" Steeda adjustable rear sway bar for superior handling, flatter cornering and better stability. Adjustable. This Steeda Rear Sway Bar features three (3) adjustment positions for fine tuning the handling balance of your Pony to suit your driving needs from mild to wild. Quality Materials. Made in the USA from 1.25" diameter tubular steel for extra strength this Steeda Rear Sway Bar is completed in a blue powdercoated finish for great looks and long life. Application. This Steeda Adjustable Rear Sway Bar is designed to fit the 2005 to 2013 Mustang Coupes, including the V6, GT, Bullitt and Shelby GT500 models. Does not fit convertible.

Improves Handling. Upgrade your Mustangs wimpy stock factory rear sway bar to a 1-1/4" Steeda adjustable rear sway bar for superior handling, flatter cornering and better stability. Adjustable. This Steeda Rear Sway Bar features three (3) adjustment positions for fine tuning the handling balance of your Pony to suit your driving needs from mild to wild. Quality Materials. Made in the USA from 1.25" diameter tubular steel for extra strength this Steeda Rear Sway Bar is completed in a blue powdercoated finish for great looks and long life. Application. This Steeda Adjustable Rear Sway Bar is designed to fit the 2005 to 2013 Mustang Coupes, including the V6, GT, Bullitt and Shelby GT500 models. Does not fit convertible.

Dial-in Traction. Whether you're setting up your suspension for the strip, the street, or a road course, Steeda's Adjustable Street Upper Control Arm will eliminate wheel hop and ensure you're putting power down to the ground. Unlike "one size fits all" arms, this adjustable upper control arm will allow you to adjust your driveshaft-to-diff erential pinion angle and optimize your suspension geometry for maximum traction and smoking fast launches. On-Car Double Adjustable. It's easy to dial in your settings with this arm. Since it's adjustable on both sides, you can make changes right on the car, without having to remove the arm to get things set up right. That makes changes quick, easy, and straightforward - just like it should be. Better Handling. With Steeda's exclusive, race-proven 3... Less

Increases Horsepower and Torque. The biggest "bang for the buck" modification that anyone can make to their GT or Bullitt Mustang is adding a Steeda cold air intake. Steeda's uniquely designed 90mm CAI allows your pony to breathe easier which translates into a significant increase of 38 horsepower, 30 ft lbs of torque at the rear wheels. Superior Airflow. Designed for superior airflow the Steeda Cold Air Intake Kit features a high-flow plastic inlet elbow and rechargeable air filter to ensure optimum airflow for better throttle response and more power. Reusable High Flow Air Filter. The included Steeda dual cone air filter has more surface area than competitors single cone filters to allow your Pony to breath much easier for more power. And best of all the filter is reusable, just clean... Less

Steeda Control Arms, Rear, Lower, Aluminum, Natural, Polyurethane Bushings, Ford, Mustang, Pair Please hover mouse to enlarge image Steeda Billet Rear Lower Control Arm 555-4405 Adjustable No Ball Joint Included No Bushing Material Polyurethane Bushings Included Yes Control Arm Finish Natural Control Arm Material Billet aluminum Control Arm Style Billet Hardware Included Yes Notes Engraved Steeda logo on the side of the control arm. Quantity Sold as a pair. Summit Racing Part Number : SDA-555-4

Improves Handling. Limit g-loading on your 2005 to 2012 Mustang for better handling and attack even hairpin turns with confidence with a Steeda rear shock tower brace. By reinforcing your rear strut towers, you'll stiffen up your chassis and improve traction for better, faster, crisper handling. Made to Perform. Like all of Steeda's products, this shock tower brace is made to the highest standards to guarantee performance. Constructed of 4130 chromoly steel and finished with a durable zinc plate, this brace gives your trunk area a no-nonsense look. Stainless steel hardware and Teflon lined rod ends included. Perfect with Coilovers. If you're adding coilovers, high performance shocks, or an IRS rear to your Pony, a shock tower brace will help you get the most from your new suspension... Less

Designed For Optimum Handling. Steeda's X5 Ball Joint will greatly improve the suspension geometry on your lowered Mustang by raising the spindle relative to the pivot-point of the ball joint. This raises the roll center back into the correct range, resulting in reduced body roll, quicker steering response and improved overall front tire grip. Tested In Extreme Conditions. The X5 ball joints are made in the USA to Steeda's strict specifications by a respected name-brand supplier to Ford, GM, and Chrysler. Except for their unique custom length, these ball joints are constructed from the the same OEM materials that have been extensively tested in Ford police cars and other heavy duty service vehicles, where they have far exceeded the durability of current production "stock" ball joints... Less

Improves Traction. Eliminate wheel hop and keep your 2005-2013 Mustang's rear end planted whether you're accelerating or carving the corners with a pair of Steeda's Chromoly Steel Lower Control Arms. Lowers 60 Ft Times. If you're tired of not being able to "hook up" and put your power down at the line, these lower control arms will help your Mustang's rear end stay planted for dramatically lower 60 foot times. Legendary Steeda Design. Steeda's chromoly lower control arms are another product of their industry-leading engineering and design. Significantly lighter than both OE parts and other aftermarket designs, these arms reduce unsprung weight for improved handling. These lower control arms were the first to incorporate the proper rear offset for the S197, due to Steeda's exclusive... Less

Steeda Driveshaft, Aluminum, 1-Piece, 4.00 in. Diameter, Ford, Mustang, Each Please hover mouse to enlarge image Steeda Driveshaft Aluminum 1-Piece 4.00 in. Diameter Ford Mustang Each Assembled Yes Balanced Yes Diameter (in) 4.000 in. Differential Yoke Included Yes Driveshaft Material Aluminum Driveshaft Style One-piece Position Rear Quantity Sold individually. Transmission Yoke Included Yes Image is a representation of this part. Actual part may vary. Summit Racing Part Number : SDA-012MAAT412

Improves Handling. Limit g-loading on your 2005 to 2012 Mustang for better handling and attack even hairpin turns with confidence with a Steeda rear shock tower brace. By reinforcing your rear strut towers, you'll stiffen up your chassis and improve traction for better, faster, crisper handling. Made to Perform. Like all of Steeda's products, this shock tower brace is made to the highest standards to guarantee performance. Constructed of 4130 chromoly steel and finished with a durable zinc plate, this brace gives your trunk area a no-nonsense look. Stainless steel hardware and Teflon lined rod ends included. Perfect with Coilovers. If you're adding coilovers, high performance shocks, or an IRS rear to your Pony, a shock tower brace will help you get the most from your new suspension... Less

Dial-in Traction. Whether you're setting up your suspension for the strip, the street, or a road course, Steeda's Adjustable Street Upper Control Arm will eliminate wheel hop and ensure you're putting power down to the ground. Unlike "one size fits all" arms, this adjustable upper control arm will allow you to adjust your driveshaft-to-diff erential pinion angle and optimize your suspension geometry for maximum traction and smoking fast launches. On-Car Double Adjustable. It's easy to dial in your settings with this arm. Since it's adjustable on both sides, you can make changes right on the car, without having to remove the arm to get things set up right. That makes changes quick, easy, and straightforward - just like it should be. Better Handling. With Steeda's exclusive, race-proven 3... Less

Improves Handling. Upgrade your heavy stock factory sway bar to a light weight Steeda unit for superior handling, flatter cornering and better stability. Adjustable. This Steeda Front Sway Bar features three (3) adjustment positions for fine tuning the handling balance of your Pony to suite your driving needs from mild to wild. Quality Materials. The Steeda Sway Bar is made from 1.375" diameter tubular steel for extra strength and is completed in a blue powdercoated finish for great looks and long life. Additional features includes Steeda's unique and patented welded billet ends, instead of stamping the ends like lesser designs. Fitment. The Steeda Heavy Duty Adjustable Front Sway Bar is designed to fit the 2005 to 2010 V6, GT, and GT500 Ford Mustang.

Light Weight. Drag racers know reducing weight from your pony results in lower elapsed times. That is why Steeda made this 2005-2010 radiator support from tubular chromoly steel that is half the weight of the stock steel unit and yet is still strong enough for you to run your front swaybar when not at the Drag Strip! Modern Tubular Design. Steeda Lightweight Radiator Support is not only designed to reduce weight from the front end of your 2005-2010 Mustang, but with it's modern tubular design it is stronger than the stock factory support. And the Steeda Lightweight Tubular Radiator Support is the only one on the market today that allows you to maintain your front swaybar and reduce costly weight at the same time. Fit and Finish. Steeda Engineers crafted this Radiator support from super... Less

Light Weight. Drag racers know reducing weight from your pony results in lower elapsed times. That is why Steeda made this 2005-2010 radiator support from tubular chromoly steel that is half the weight of the stock steel unit and yet is still strong enough for you to run your front swaybar when not at the Drag Strip! Modern Tubular Design. Steeda Lightweight Radiator Support is not only designed to reduce weight from the front end of your 2005-2010 Mustang, but with it's modern tubular design it is stronger than the stock factory support. And the Steeda Lightweight Tubular Radiator Support is the only one on the market today that allows you to maintain your front swaybar and reduce costly weight at the same time. Fit and Finish. Steeda Engineers crafted this Radiator support from super... Less

Steeda Air Intake, Polished, Aluminum Tube, Blue Filter, Ford, Mustang, 4.6L, Kit Please hover mouse to enlarge image Steeda Air Intake Polished Aluminum Tube Blue Filter Ford Mustang 4.6L Kit Filter Color Blue Filter End Cap Finish Polished Quantity Sold as a kit. Sleeve Color Blue Tube Color Polished Tube Material Aluminum Summit Racing Part Number : SDA-555-3116 Fitment P lease see the "Compatibility" link at the top of the listing. Fitment information may not be available for all products.

Increases Horsepower and Torque. The biggest "bang for the buck" modification that anyone can make to their GT or Bullitt Mustang is adding a Steeda cold air intake. Steeda's uniquely designed 90mm CAI allows your pony to breathe easier which translates into a significant increase of 38 horsepower, 30 ft lbs of torque at the rear wheels. Superior Airflow. Designed for superior airflow the Steeda Cold Air Intake Kit features a light weight high-flow carbon fiber inlet elbow and rechargeable air filter to ensure optimum airflow for better throttle response and more power. Reusable High Flow Air Filter. The included Steeda dual cone air filter has more surface area than competitors single cone filters to allow your Pony to breath much easier for more power. And best of all the filter is... Less

Increases Horsepower and Torque. The biggest "bang for the buck" modification that anyone can make to their GT or Bullitt Mustang is adding a Steeda cold air intake. Steeda's uniquely designed 90mm CAI allows your pony to breathe easier which translates into a significant increase of 38 horsepower, 30 ft lbs of torque at the rear wheels. Superior Airflow. Designed for superior airflow the Steeda Cold Air Intake Kit features a light weight high-flow carbon fiber inlet elbow and rechargeable air filter to ensure optimum airflow for better throttle response and more power. Reusable High Flow Air Filter. The included Steeda dual cone air filter has more surface area than competitors single cone filters to allow your Pony to breath much easier for more power. And best of all the filter is... Less

Dial-in Traction. Whether you're setting up your suspension for the strip, the street, or a road course, Steeda's Adjustable Street Upper Control Arm will eliminate wheel hop and ensure you're putting power down to the ground. Unlike "one size fits all" arms, this adjustable upper control arm will allow you to adjust your driveshaft-to-diff erential pinion angle and optimize your suspension geometry for maximum traction and smoking fast launches. On-Car Double Adjustable. It's easy to dial in your settings with this arm. Since it's adjustable on both sides, you can make changes right on the car, without having to remove the arm to get things set up right. That makes changes quick, easy, and straightforward - just like it should be. Better Handling. With Steeda's exclusive, race-proven 3... Less

Improves Traction. Eliminate wheel hop and keep your 2005-2013 Mustang's rear end planted whether you're accelerating or carving the corners with a pair of Steeda's Chromoly Steel Lower Control Arms. Lowers 60 Ft Times. If you're tired of not being able to "hook up" and put your power down at the line, these lower control arms will help your Mustang's rear end stay planted for dramatically lower 60 foot times. Legendary Steeda Design. Steeda's chromoly lower control arms are another product of their industry-leading engineering and design. Significantly lighter than both OE parts and other aftermarket designs, these arms reduce unsprung weight for improved handling. These lower control arms were the first to incorporate the proper rear offset for the S197, due to Steeda's exclusive... Less