Conbraco Industries

The Apollo 77W series two-piece inline full port ball valve is made of bronze and has a lever handle and press end connections on both ends. This valve is made of bronze for higher strength and corrosion resistance than brass and has a plated steel lever handle with a vinyl sleeve for manual on/off control. This valve is full port for reduced friction; its inner diameter is the same as the inner diameter of the pipe it connects to for maximum operating efficiency. Its maximum pressure is 200 pounds per square inch (psi) for cold working pressure (CWP). The valve is inline for connecting two pipes going in the same direction and has press end connections for direct mechanical connection to ASTM B88-Type K, L, and M copper tubing using press tools. Multifill polytetrafluoroet hylene (MPTFE)... Less

The Apollo 70-100 series two-piece inline ball valve is made of bronze and has a lever handle and female National Pipe Taper (NPT) threaded connections on both ends. This valve is made of bronze for higher strength and corrosion resistance than brass and has a zinc-plated steel lever handle with a vinyl sleeve for manual on/off control. The maximum pressure is 600 pounds per square inch (gauge) (psig) for use with water, oil, and gas (WOG) and 150 for saturated steam. The valve is inline for connecting two pipes going in the same direction and has NPT threads on both ends for creating tighter seals than straight threads. Polytetrafluoroet hylene (PTFE) reinforced seats and seals reduce the risk of valve leakage. This ball valve is standard (or reduced or regular) port for reduced valve... Less

Ball Valve, Two Piece, Fnpt Connection, Max. Pressure 600 Psi Wog, Max. Steam Pressure 150 Psi Wsp, Pipe Size 1-1/2 In., Material Of Construction Low Lead Bronze, Seats Mptfe, Seals Mptfe, Ball Material C27450 Lead-free Brass/chrome- plated, Stem Material C27450 Lead-free Brass, Handle Lever, Temp. Range (f) -20 To 450 Degrees , Compliance Certified For Use In Potable Water Applications In Ca And Vt, Standards Ansi/nsf 61 Section 8,2005

Ball Valve, 2 Pc High Pressure, Threaded Connection, Max. Pressure 3,000 Psig Wog, Standard Port, Material Of Construction Carbon Steel, Seats Rptfe, Seals Rptfe, Ball Material Carbon Steel, Stem Material Rptfe, Stem Chrome Plated Carbon Steel, Handle Steel Zinc Plated, Standards Mss Sp-110

The ApolloXpress large diameter copper fittings feature a patented solid cross-section grab ring, creating significant contact with the tube after pressing. The Leak Before Press feature allows water to flow past the sealing element during pressure testing if the fitting has not been pressed. Last, but certainly not least, we've added a visual element: if the break-away band is still on the fitting, it needs to be checked. Made in the USA.

The ApolloXpress large diameter copper fittings feature a patented solid cross-section grab ring, creating significant contact with the tube after pressing. The Leak Before Press feature allows water to flow past the sealing element during pressure testing if the fitting has not been pressed. Last, but certainly not least, we've added a visual element: if the break-away band is still on the fitting, it needs to be checked. Made in the USA.

The ApolloXpress small diameter fittings feature copper-body construction for most configurations. The lead-free design offers a Leak Before Press feature. The forward lip aids in the alignment of the copper tube during insertion, reducing the risk of o-ring damage. These fittings are approved for underground applications and are ideal for service and repair. Pre-lubricated, they are fast and simple to install. Copper fittings are Made in the USA.

The ApolloXpress small diameter fittings feature copper-body construction for most configurations. The lead-free design offers a Leak Before Press feature. The forward lip aids in the alignment of the copper tube during insertion, reducing the risk of o-ring damage. These fittings are approved for underground applications and are ideal for service and repair. Pre-lubricated, they are fast and simple to install. Copper fittings are Made in the USA.