Category

Plumbing Supplies
Showing results for "2 inch trash pump"
Results 1 - 40 of 1500+

Sludge Master Air-Powered...

$2,699.99
Northern Tool Sludge Master Air-Powered Trash Pump - 3 Inch Port, 18,000 GPH, 2 1/2 HP, Model SMA3-A, 6AM1
+ $34.99 shipping
/sludge-master-airpowered/tLBGWb3ZEwb_RsEHeK0_1w==/info
Northern Tool
IN_STOCK ( In stock )
This rugged air-powered submersible trash pump can handle mud, leaves, twigs, sand, sludge and solids up to 1 1/2in. and is self-draining to prevent damage in cold weather. Designed to handle rough treatment and can run dry without damage. The two-vane cast-iron impeller operates at low RPM with less wear. U.S.A. Flow GPH 18,000, HP 2 1/2, Solid Handling in. 1 1/2, Suction Type Steel strainer, Volute Aluminum, Seals Face-type mechanical, Dimensions L x W x H in. 23 1/2 x 13 x 13, Discharge Port in. 3, Impeller Shaft 416 SST, Max. PSI 80, Max. Total Head ft. 55, Pump Housing Aluminum, Self-Priming Yes. 80 CFM max. air consumption Requires 1/2in. dia. air hose Fits into a 14in. opening Continuous automatic lubricating oiler. Model Number: SMA3,6AM1
More

NorthStar Full Trash Pump - 2...

$1,099.99
Northern Tool NorthStar Full Trash Pump - 2 Inch Ports, 11,100 GPH, 1 Inch Solids Capacity, 160cc Honda GX160 Engine
No Shipping Info
/northstar-full-trash-pump/Dihfng8RN0fi52Ewm_REBg==/info
Northern Tool
IN_STOCK ( In stock )
This NorthStar Full Trash Pump runs a quiet, reliable OHV Honda 160cc engine with Oil Alert. Cast iron pump casing lined with stainless steel. Long-life silicon carbide mechanical seal resists corrosion, wear and heat. Long-lasting cast iron impeller reduces vibration. Centrifugal design has 2in. inlet and outlet. Adjustable impeller height. Includes FREE wrench and strainer. Fits Hose Dia. in. 2, Max. Total Head ft. 98, Pump Housing Cast iron w/stainless steel liner, Seals Silicon carbide mechanical, Self-Priming Yes, Low Oil Shutdown Yes, Dimensions L x W x H in. 17 x 14 1/2 x 13 1/2, Flow GPH 11,100, Fuel Capacity gal. 63, HP 5 1/2, Impellers HRFC cast iron, Engine Type GX160 OHV, Discharge Port in. 2, Engine Honda, Engine Displacement cc 160, Engine Speed RPM 3,510-3,750, Max. Suction... Less
More

Champion 2 inch Trash/ Water...

$273.99
Overstock.com Champion 2 inch Trash/ Water Transfer Pump Hose Kit
Free Shipping
/champion-2-inch-trash/oyLDNNXAd57DnsGgVy0COw==/info
Overstock.com
IN_STOCK ( In stock )
Free Shipping
Champion presents this maximum cleaning power trash and water pump. This pump is perfect for big jobs and provides a fold-away handle for easy storage.
More

Sludge Master Air-Powered...

$2,699.99
Northern Tool Sludge Master Air-Powered Trash Pump - 3 Inch Port, 18,000 GPH, 2 1/2 HP, Model SMA3-A, 6AM1
+ $34.99 shipping
/sludge-master-airpowered/tLBGWb3ZEwb_RsEHeK0_1w==/info
Northern Tool
IN_STOCK ( In stock )
This rugged air-powered submersible trash pump can handle mud, leaves, twigs, sand, sludge and solids up to 1 1/2in. and is self-draining to prevent damage in cold weather. Designed to handle rough treatment and can run dry without damage. The two-vane cast-iron impeller operates at low RPM with less wear. U.S.A. Flow GPH 18,000, HP 2 1/2, Solid Handling in. 1 1/2, Suction Type Steel strainer, Volute Aluminum, Seals Face-type mechanical, Dimensions L x W x H in. 23 1/2 x 13 x 13, Discharge Port in. 3, Impeller Shaft 416 SST, Max. PSI 80, Max. Total Head ft. 55, Pump Housing Aluminum, Self-Priming Yes. 80 CFM max. air consumption Requires 1/2in. dia. air hose Fits into a 14in. opening Continuous automatic lubricating oiler. Model Number: SMA3,6AM1
More

Honda Submersible Trash Pump...

$739.95
Northern Tool Honda Submersible Trash Pump - 2 Inch Ports, 9000 GPH, 2 Inch Solids Capacity, 1 HP Motor, Model 611100
+ $25.99 shipping
/honda-submersible-trash/JVB1kZAN9J6132FfxsUqxw==/info
Northern Tool
IN_STOCK ( In stock )
This Honda Submersible Trash Pump has a powerful 1 HP, 115 motor, capable of moving water up to 9000 GPH and can handle up to 2in. solids, letting you move slurry and dirty liquids without the worry of damaging the pump. Great for draining basements, window wells, garden irrigation, decorative fountains and more. Amps 47 starting, 11.1 running, HP 1, Impeller Shaft Stainless steel, Max. PSI 18, Max. Total Head ft. 42, Discharge Port in. 2, Flow GPH 9,000, Seals Carbon/ceramic mechanical, Solid Handling in. 2, Suction Port in. 2, Thermal Overload Protection Yes, Power Cord ft. 25, Pump Housing Stainless steel, Volts 115, Dimensions L x W x H in. 9 x 22 7/8, Application Pump. 115 Volt operation can be plugged into a standard outlet Handles solids up to 2in. and can move slurry and dirty... Less
More

IPT Cast Iron Sewage and...

$899.99
Northern Tool IPT Cast Iron Sewage and Trash Pump - 2 Inch NPT, 1 Inch Solids Capacity
+ $53.99 shipping
/ipt-cast-iron-sewage-and/mwB1P9aBa5tcoe7WzoUJ9g==/info
Northern Tool
IN_STOCK ( In stock )
This heavy-duty IPT sewage/trash pump features a 3-phase, 230/460V motor and self-cleaning stainless steel impeller for clog and wear resistance. Max. Total Head ft. 62, Port Size in. 2, Pump Housing Cast iron, HP 3, Max. PSI 26, Suction Port in. 2, Dimensions L x W x H in. 21 x 9 x 9, Discharge Port in. 2, Flow GPH 6,600, Amps 8/4, Battery Connections No, Max. Suction Lift ft. 20, Diaphragm No, Valves No, Volts 230/460, Self-Priming Yes, Solid Handling in. 1. Silicon carbide/Viton mechanical seal Built-in Buna-N check valve Replaceable cast iron volute/wearplate designed for solids handling Pull from rear design. Model Number: 316A-IPT-95. UPC: 726846518256.
More

Powerhorse Semi-Trash Pump -...

$299.99
Northern Tool Powerhorse Semi-Trash Pump - 2 Inch Ports, 7860 GPH, 5/8 Inch Solids Capacity, 208cc Powerhorse Engine
+ $39.49 shipping
/powerhorse-semitrash/OTmhhQJK4egqhQFIh702Cg==/info
Northern Tool
IN_STOCK ( In stock )
With a dependable 208cc Powerhorse engine and silicon carbide mechanical seals that resist corrosion, wear and heat better than a standard seal, this Powerhorse water pump from Northern Tool gives you the performance you need, when you need it. Features a quality engine and quality parts designed to deliver years of service. Not for sale in California. Engine Displacement cc 208, Fits Hose Dia. in. 2, Flow GPH 7,860, Fuel Capacity gal. 2 3/4, Discharge Port in. 2, Engine Powerhorse, Dimensions L x W x H in. 22 x 18 x 17, Seals Silicon carbide, Solid Handling in. 5/8, Suction Port in. 2, Volute Cast iron, Max. Total Head ft. 98, Low Oil Shutdown Yes, Max. PSI 43 1/2, Max. Suction Lift ft. 23, HP 6, Impellers Cast iron, Run Time 2 hrs., Max. Fluid Temp. F 98. Dependable 208cc Powerhorse... Less
More

Champion 2-inch Trash/ Water...

$273.99
Sears Marketplace Champion 2-inch Trash/ Water Transfer Pump Hose Kit
No Shipping Info
/champion-2inch-trash/BCY8Ohbi_IddrVeLLnmgqw==/info
Sears Marketplace
IN_STOCK ( In stock )
Champion presents this maximum cleaning power trash and water pump. This pump is perfect for big jobs and provides a fold-away handle for easy storage.
More

Semi-Trash Water Pump ONLY -...

$99.99
Northern Tool Semi-Trash Water Pump ONLY - For Straight Keyed Shafts, 2 Inch Ports, 7860 GPH
+ $11.99 shipping
/semitrash-water-pump/vk6QjAjpLvDP-MuEejM7KQ==/info
Northern Tool
IN_STOCK ( In stock )
This pump requires 4 HP engine with 2 7/16in.L, 3/4in. straight keyed shaft, 5/16in.-24 tapped hole and 3 5/8in. bolt circle. Uses long-lasting, high-end silicon carbide seals that are specially suited for heavy-duty applications such as pumping contaminated and abrasive fluids. Shaft Length in. 2 7/16, GPH 7,860, Impellers Cast iron, Max. Total Head ft. 95, Required HP 4, Seals Silicon carbide, Port Size in. 2, Bolt Circle in. 3 5/8, Dimensions L x W x H in. 8 x 8 x 13, Shaft Type Straight keyed, Solid Handling in. 5/16, Volute Cast iron. FCD45 cast iron impeller and volute reduce vibration and last longer for semi-trash operations Silicon carbide seals are 2 times harder, 15 tougher, and 50 stronger than common aluminum oxide seals Durable cast iron impeller and volute Uses standard NPT... Less
More

Semi-Trash Water Pump ONLY -...

$89.99
Northern Tool Semi-Trash Water Pump ONLY - For Threaded Shafts, 2 Inch Ports, 7860 GPH
+ $11.99 shipping
/semitrash-water-pump/T3-w-hT_jk6oryUz1PdDkQ==/info
Northern Tool
IN_STOCK ( In stock )
Water pump gives you the performance you need, when you need it. Engine not included. Uses long-lasting, high-end silicon carbide seals that are specially suited for heavy-duty applications such as pumping contaminated and abrasive fluids. Requires 4 HP engine w/ M14-1.5 externally threaded shaft, 2 7/16in.L and 3 5/8in. bolt circle. Silicon carbide seals are 2 times harder, 15 tougher, and 50 stronger than common aluminum oxide seals FCD45 cast iron impeller and volute reduce vibration and last longer for semi-trash operations Uses standard NPT threads for attachment flexibility Utilizes a check valve to hold a prime while the pump is not running. Model Number: 109273
More

Powerhorse Semi-Trash Pump -...

$399.98
Northern Tool Powerhorse Semi-Trash Pump - 3 Inch Ports, 14,160 GPH, 5/8 Inch Solids Capacity, 208cc Powerhorse Engine
+ $37.99 shipping
/powerhorse-semitrash/uihqR59rniFrVHEuWHvURA==/info
Northern Tool
IN_STOCK ( In stock )
Powerhorse water pumps from Northern Tool give you the performance you need, when you need it. Powerhorse water pumps feature quality engines and quality parts designed to deliver years of service. Not for sale in California. Engine Powerhorse, Engine Displacement cc 208, Solid Handling in. 5/8, Start Type Recoil, Impellers Cast iron, Low Oil Shutdown Yes, Suction Port in. 3, Volute Cast iron, Fits Hose Dia. in. 3, Flow GPH 14,160, Dimensions L x W x H in. 24 x 20 x 19, Discharge Port in. 3, Max. Total Head ft. 98, Seals Silicon carbide. 208cc Powerhorse engine Cast iron sleeve Low oil shutdown 5/8in. soft solids capacity Pump delivers 14,160 GPH with 98ft. max. head Silicon carbide mechanical seals resist corrosion, wear and heat for a long service life Durable cast iron impeller and... Less
More

Apache Hose 3 Trash Pump Hose...

$329.99
WaterPumpsDirect Apache Hose 3 Trash Pump Hose Kit - 98128662
No Shipping Info
/apache-hose-3-trash-pump/G82fhX9Q3dKbo4btGfioRg==/info
WaterPumpsDirec t
IN_STOCK ( In stock )
Store not rated
Apache Hose 3 Trash Pump Hose Kit - 98128662 - 3 Trash Pump Hose Kit For Gas Powered Pumps Everything you need to get the water moving Designed For Water Removal Where Solids Are Present Larger strainer openings allow smaller solids to pass through Kit Includes:
More

5.5 Horsepower 2-inch...

$231.52
Rakuten.com Shopping 5.5 Horsepower 2-inch Self-priming Trash/ Water Pump
+ $16.91 shipping
/55-horsepower-2inch/8laWPjwiZJHgAYtbZywSUQ==/info
Rakuten.com Shopping
IN_STOCK ( In stock )
Use the Sportsman Series 2 Inch Self-Priming Water Pump to pump water to boat docks and out of duck blinds. If you need to drain a small pool to repair a crack or liner leak, the 2 Inch Self-Priming Water Pump will make the job go faster. This small but mighty pump has a 2 inch inlet that can move water up to 85 feet, or 26 feet uphill. The 5.5 horsepower gasoline motor can move up to 9,000 gallons of water per hour. The Sportsman Series Self-Priming Water Pump is great to have on hand for emergencies or jobs around the house and farm. Ideal to drain a flooded basement or empty a pool or pond in minutes. 2 in. pump outlet and inlet, max flow: 150 GPM / 9,000 GPH Max head: 85 ft., max suction lift: 26 ft. Cast iron propeller, recoil start, 4 stroke 5.5 HP Heavy duty 5.5 HP OHV gasoline... Less
More

Lifan Pump Pro Full Trash 3...

$899.00
Overstock.com Lifan Pump Pro Full Trash 3 inch Water Pump
Free Shipping
/lifan-pump-pro-full-trash/OMYwDCu3fGLLfImg_2P4wQ==/info
Overstock.com
IN_STOCK ( In stock )
Free Shipping
This full trash 3-inch water pump by Lifan Power USA is constructed of metal and is perfect for residential and commercial use. This pump is capable of running for over two hours with a 1.58-gallon fuel tank.
More

Koshin 2 in. 1/2 HP Side...

$377.99
Sears Koshin 2 in. 1/2 HP Side Discharge Submersible Trash Pump
Free Shipping
/koshin-2-in-12-hp-side/ZEc3XQaXTOpd0wIfnDugkw==/info
Sears
IN_STOCK ( In stock )
Free Shipping
The Koshin 1/2 HP Submersible Trash Pump is designed to move Larger quantities of water with solids up to 3/8 in. diameter.
More

Apache Hose 4 Trash Pump Hose...

$429.99
WaterPumpsDirect Apache Hose 4 Trash Pump Hose Kit - 98128667
No Shipping Info
/apache-hose-4-trash-pump/YTkwK1-oZf1qzmVkEvFf8Q==/info
WaterPumpsDirec t
IN_STOCK ( In stock )
Store not rated
Apache Hose 4 Trash Pump Hose Kit - 98128667 - 4 Trash Pump Hose Kit For Gas Powered Pumps Everything you need to get the water moving Designed For Water Removal Where Solids Are Present Larger strainer openings allow smaller solids to pass through Kit Includes:
More

TSURUMI HSZ2.4S62 Automatic...

$483.77
Zoro TSURUMI HSZ2.4S62 Automatic Trash Pump,1/2 HP,110V
Free Shipping
/tsurumi-hsz24s62/arK17hN_ym7jAf8lJZ1LwA==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Construction Site/Residential Dewatering Pump, Construction Site and Residential Dewatering, 1/2 HP, Voltage 110, Amps 5.4 AC, Cord Length 20 ft., Discharge NPT 2 In., GPM 1 Ft. of Head 53, Maximum Head 39 ft., Height 151/8 In., Diameter 131/2 In., Housing Die Cast Aluminum, Top Material Die Cast Aluminum, Base Material PVC, Impeller Material Urethane Rubber, Length 151/8 In., Width 131/2 In., Max. Dia. Solids 1/4 In., Max. Liquid Temp. 104 Degrees F, Suction Screened Bottom
More

Hs2.4s-62 Genuine Tsurumi 2...

$275.00
eBay Hs2.4s-62 Genuine Tsurumi 2 Inch Submersible Dirty Trash Mud Water Sump Pump
Free Shipping
/hs24s62-genuine-tsurumi/m7YFIVyo8IpiCjwvCZIIzw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
New Genuine Tsurumi 2submersible trash pump 110v with NPT threaded discharge Submersible Trash Pump 1/2HP Double mechanical seal w/silicon carbide faces running in oil provides reliable performance Built-in circle-thermal protector protects motor from both over-heating overcurrent Discharge Bore: 2 NPT standard threads Max. Capacity: 3000 GPH Max. Head: 39'Motor Rating: 1/2 HP Voltage: 110V Current: 5.4A Cable Length: 20'Pump Diameter: 9 1/2HS2.4S-62 shipping weight 31lbs. via UPS This pump
More

Honda 11.1 Amp 2 in. FNPT 150...

$699.00
CPO Outlets Honda 11.1 Amp 2 in. FNPT 150 GPM Submersible Trash Pump WSP100
Free Shipping
/honda-111-amp-2-in-fnpt/L5ncN_BN5v3BjinYo0CggA==/info
CPO Outlets
IN_STOCK ( In stock )
Store not rated
Free Shipping
11.1 Amp 2 in. FNPT 150 GPM Submersible Trash Pump - 611100
More

Honda 11.1 Amp 2 in. FNPT 150...

$699.00
Tyler Tool Honda 11.1 Amp 2 in. FNPT 150 GPM Submersible Trash Pump WSP100
Free Shipping
/honda-111-amp-2-in-fnpt/CI9Kw6_ncyt4Lnm91YFyQQ==/info
Tyler Tool
IN_STOCK ( In stock )
Free Shipping
11.1 Amp 2 in. FNPT 150 GPM Submersible Trash Pump - 611100
More

Water and Trash Pump Strainer...

$22.99
Northern Tool Water and Trash Pump Strainer - 3 Inch
+ $6.49 shipping
/water-and-trash-pump/SEHcujLRGIT1_7naJe7s5A==/info
Northern Tool
IN_STOCK ( In stock )
Zinc-plated steel strainers can be used with electric and gas powered water and trash pumps. Round or square hole. NPT threads. 3in. round. Finish Type Zinc plated, Length in. 3, Material Steel, Size in. 3, Works With Electric, gas powered pumps. 6 15/16in. outer diameter. Model Number: RD0300
More

IPT Cast Iron Sewage and...

$1,749.99
Northern Tool IPT Cast Iron Sewage and Trash Pump - 3 Inch NPT, 1.5 Inch Solids Capacity
No Shipping Info
/ipt-cast-iron-sewage-and/zkY2BXWgq6EqrauzmZbAug==/info
Northern Tool
IN_STOCK ( In stock )
This heavy-duty IPT sewage/trash pump features a 3-phase, 230/460V motor and self-cleaning stainless steel impeller for clog and wear resistance. Max. Total Head ft. 105, Valves No, Volts 230/460, Solid Handling in. 1.5, Suction Port in. 3, Diaphragm No, Port Size in. 3, Pump Housing Cast iron w/cleanout cover, Self-Priming Yes, Max. PSI 45, Max. Suction Lift ft. 20, Amps 22/11, Dimensions L x W x H in. 27 x 16 x 13, Discharge Port in. 3, Flow GPH 20,400, HP 7.5, Battery Connections No. Silicon carbide/Viton mechanical seal Built-in Buna-N check valve Replaceable cast iron volute/wearplate designed for solids handling Pull from rear design Front cleanout. Model Number: 394A-IPT-95. UPC: 726846518287.
More

Lf3twp9 3 inch Full Trash...

$899.00
Overstock.com Lf3twp9 3 inch Full Trash Water Pump
Free Shipping
/lf3twp9-3-inch-full-trash/faSGwYVLnce2Jjr0-yYN0A==/info
Overstock.com
IN_STOCK ( In stock )
Free Shipping
This 3-inch full trash water pump is crafted with black industrial metal and is EPA-approved. Designed for residential and commercial use, this convenient pump features a two-hour run time and utilizes a 9-horsepower engine.
More

NorthStar Extended Run...

$649.98
Northern Tool NorthStar Extended Run Semi-Trash Pump - 3 Inch Ports, 15,850 GPH, 3/4 Inch Solids Capacity, 200cc Honda GX200 Engine
+ $52.49 shipping
/northstar-extended-run/NP_G_kCB6o3n-G-1T46WcQ==/info
Northern Tool
IN_STOCK ( In stock )
This NorthStar extended run semi-trash water pump provides more than 8 hours of continuous pumping without refueling, up to 4 times the run time of typical pumps. It features a powerful, dependable Honda GX200 engine with Oil Alert that provides extra power, quieter performance and greater engine life. NorthStar uses long-lasting, high-end silicon carbide seals that are specially suited for heavy-duty applications such as pumping contaminated and abrasive fluids. Max. Suction Lift ft. 23, Max. Total Head ft. 98, Seals Silicon carbide, HP 4 7/8, Discharge Port in. 3, Fits Hose Dia. in. 3, Flow GPH 15,850, Fuel Capacity gal. 3 1/2, Engine Honda, Dimensions L x W x H in. 21 7/8 x 18 5/8 x 20, Impellers Cast iron, Suction Port in. 3, Volute Cast iron, Self-Priming Yes, Solid Handling in. 3/4,... Less
More

Full Trash Water Pump ONLY -...

$249.99
Northern Tool Full Trash Water Pump ONLY - For Threaded Shafts, 3 Inch Ports, 11,820 GPH
+ $26.99 shipping
/full-trash-water-pump/YiiGxcdDhTsmcj7ircDiPA==/info
Northern Tool
IN_STOCK ( In stock )
Water pump gives you the performance you need, when you need it. Engine not included. Uses long-lasting, high-end silicon carbide seals that are specially suited for heavy-duty applications such as pumping contaminated and abrasive fluids. Requires 5.5 HP engine w/ M18-1.5 externally threaded shaft, 3 5/64in.L and 3 5/8in. bolt circle. Dimensions L x W x H in. 11 x 13 x 14, Max. Total Head ft. 82, Port Size in. 3, Required HP 5 1/2, Seals Silicon carbide, GPH 11,820, Bolt Circle in. 3 5/8, Impellers Cast iron, Solid Handling in. 1 1/4, Volute Cast iron, Shaft Length in. 3 5/64, Shaft Type Externally threaded. Silicon carbide seals are 2 times harder, 15 tougher, and 50 stronger than common aluminum oxide seals FCD45 cast iron impeller and volute reduce vibration and last longer for... Less
More

Semi-Trash Water Pump ONLY -...

$119.99
Northern Tool Semi-Trash Water Pump ONLY - For Straight Keyed Shafts, 3 Inch Ports, 14,265 GPH
+ $13.49 shipping
/semitrash-water-pump/Qe3RYb01HmQEqa5a6Uj8KQ==/info
Northern Tool
IN_STOCK ( In stock )
Pump requires 5 HP engine with 2 7/16in.L, 3/4in. straight keyed shaft, 5/16in.-24 tapped hole and 3 5/8in. bolt circle. Uses long-lasting, high-end silicon carbide seals that are specially suited for heavy-duty, continuous-use applications such as pumping contaminated and abrasive fluids. Impellers Cast iron, Port Size in. 3, Required HP 5, Seals Silicon carbide, Shaft Length in. 2 7/16, Max. PSI 36, Bolt Circle in. 3 5/8, Dimensions L x W x H in. 10 x 10 x 15, GPH 14,265, Max. Total Head ft. 85, Volute Cast iron, Shaft Type Straight keyed, Solid Handling in. 3/4. FCD45 cast iron impeller and volute reduce vibration and last longer for semi-trash operations Silicon carbide seals are 2 times harder, 15 tougher, and 50 stronger than common aluminum oxide seals Durable cast iron impeller... Less
More

Tsurumi Sand/Trash Pump - 3...

$499.99
Northern Tool Tsurumi Sand/Trash Pump - 3 Inch Discharge, 4200 GPH, 60-Ft. Max. Total Head, Model HS3.75S-62
+ $27.99 shipping
/tsurumi-sandtrash-pump/QeH9OOeEkS531oTEVWH-xg==/info
Northern Tool
IN_STOCK ( In stock )
High-volume 3in., 1 HP Tsurumi Sand/Trash Pump. Perfect for high volume jobs, like municipal and heavy-duty construction applications. Motor is built for continuous operation with 100 copper windings. Shaft-mounted agitator limits clogging by suspending sand and debris. Max. PSI 26, Max. Total Head ft. 60, Pump Housing Cast aluminum, HP 1, Impeller Shaft Stainless steel, Amps 10, Dimensions L x W x H in. 12 1/2 x 12 1/2 x 15 1/4, Discharge Port in. 3, Flow GPH 4,200, Suction Port in. 3, Thermal Overload Protection Yes, Volts 110, Volute Cast iron, Seals Semi-Vortex, Solid Handling in. 1/4, Power Cord ft. 32. Urethane rubber semi-vortex impeller. Model Number: HS3.75S-62
More

IPT Trash Pump - 4 Inch...

$3,049.99
Northern Tool IPT Trash Pump - 4 Inch Ports, 37,800 GPH, 2 Inch Solids Capacity, 390cc Honda GX390 Engine, Model 3994-IPT-96
No Shipping Info
/ipt-trash-pump-4-inch/pdBKYXRQPvshZaSDhUPwKQ==/info
Northern Tool
IN_STOCK ( In stock )
Powered by a reliable Honda GX390 engine with electric start, this pump is designed for applications that require high flow efficiency and solids handling capacity. Constructed of heavy-duty sand cast aluminum with cast iron volutes and impellers. Silicon carbide seal assembly resists corrosion, wear and heat. Includes free steel strainer. Seals Silicon carbide, Self-Priming Yes, Solid Handling in. 2, Max. Total Head ft. 102, Pump Housing Cast aluminum, Volute Cast iron, Max. PSI 44, Max. Suction Lift ft. 20, HP 11, Impellers Cast iron, Run Time 80 min., Fits Hose Dia. in. 4, Flow GPH 37,800, Fuel Capacity gal. 1.6, Engine Displacement cc 390, Low Oil Shutdown Yes, Discharge Port in. 4, Check Valve Yes, Dimensions L x W x H in. 44 x 37 1/2 x 27 1/2, Engine Honda, Engine Type GX390 OHV,... Less
More

Water and Trash Pump Strainer...

$34.48
Sears Marketplace Water and Trash Pump Strainer - 2in.
No Shipping Info
/water-and-trash-pump/pVLc4Q2Gzoa9elc-WeL66A==/info
Sears Marketplace
IN_STOCK ( In stock )
Water and Trash Pump Strainer - 2in.
More

IPT Cast Iron Semi-Trash Pump...

$699.99
Northern Tool IPT Cast Iron Semi-Trash Pump - 2 Inch Ports, 9000 GPH, 3/8 Inch Solids Capacity, 160cc Honda Engine, Model 2GS5QCB
+ $50.49 shipping
/ipt-cast-iron-semitrash/HUWfTEHEFlGzgs7_t-Ov0Q==/info
Northern Tool
IN_STOCK ( In stock )
This IPT Cast Iron Semi-Trash Pump has a removable/replace able cast iron wearplate/volute. Clog-resistant impeller and wearplate ensure a long life. Dual volute reduces radial load on engines. Discharge Port in. 2, Engine Honda, Engine Displacement cc 160, Engine Speed RPM 3,600, Check Valve Buna-N, Dimensions L x W x H in. 20 x 17 x 17, Flow GPH 9,000, Fuel Capacity gal. 1/2, Impellers Cast iron, Low Oil Shutdown No, Engine Type 160 cc, Fits Hose Dia. in. 2, Max. Suction Lift ft. 20, Max. Total Head ft. 122, Pump Housing Cast iron, Run Time 60, Max. PSI 53, Solid Handling in. 3/8, Start Type Recoil, Suction Port in. 2, Volute Cast iron, Seals Buna-N, Self-Priming Yes, Max. Fluid Temp. F 180. Heavy-duty roll cage for portability and durability Buna-N mechanical seal Built-in... Less
More

IPT Cast Iron Semi-Trash Pump...

$549.99
Northern Tool IPT Cast Iron Semi-Trash Pump - 2 Inch Ports, 6,600 GPH, 3/8 Inch Solids Capacity, 127cc Briggs & Stratton 550 Series Engine, Model 2GS4ACB
+ $47.99 shipping
/ipt-cast-iron-semitrash/QIMTxnWBf9kbFiAPqFZasQ==/info
Northern Tool
IN_STOCK ( In stock )
This IPT Cast Iron Semi-Trash Pump features a removable/replace able cast iron wearplate/volute. Clog-resistant impeller and wearplate ensure a long life. Dual volute reduces radial load on engines. Discharge Port in. 2, Engine Briggs & Stratton, Engine Displacement cc 127, Engine Speed RPM 3,600, Check Valve Buna-N, Dimensions L x W x H in. 20 x 17 x 17, Flow GPH 6,600, Fuel Capacity gal. 1/2, Impellers Cast iron, Low Oil Shutdown No, Engine Type 550 Series, Fits Hose Dia. in. 2, Max. Suction Lift ft. 20, Max. Total Head ft. 112, Pump Housing Cast iron, Run Time 60, Max. PSI 49, Solid Handling in. 3/8, Start Type Recoil, Suction Port in. 2, Volute Cast iron, Seals Buna-N, Self-Priming Yes, Max. Fluid Temp. F 180. Heavy-duty roll cage for portability and durability Buna-N mechanical seal... Less
More

IPT Cast Iron Semi-Trash Pump...

$799.99
Northern Tool IPT Cast Iron Semi-Trash Pump - 3 Inch Ports, 13,800 GPH, 3/4 Inch Solids Capacity, 160cc Honda GC160 Engine, Model 3GS5QCV
+ $65.49 shipping
/ipt-cast-iron-semitrash/rWC2M7UbiRYscqRlcl_74g==/info
Northern Tool
IN_STOCK ( In stock )
This IPT Cast Iron Semi-Trash Pump has a removable/replace able cast iron wearplate/volute. Clog-resistant impeller and wearplate ensure a long life. Dual volute reduces radial load on engines. Check Valve Buna-N, Dimensions L x W x H in. 24 x 19 x 18, Discharge Port in. 3, Engine Speed RPM 3,600, Engine Type GC160, Fits Hose Dia. in. 3, Flow GPH 13,800, Engine Honda, Engine Displacement cc 160, Low Oil Shutdown No, Max. PSI 43, Max. Suction Lift ft. 20, Fuel Capacity gal. 1/2, Impellers Cast iron, Run Time 60 min., Seals Viton, Self-Priming Yes, Solid Handling in. 3/4, Max. Total Head ft. 100, Pump Housing Cast iron, Volute Cast iron, Start Type Recoil, Suction Port in. 3, Max. Fluid Temp. F 180. Heavy-duty roll cage for portability and durability Viton mechanical seal and flapper/check... Less
More

Water and Trash Pumps 2 in...

$139.97
Home Depot Water and Trash Pumps 2 in. Hose Kit PA0650201
Free Shipping
/water-and-trash-pumps-2/xxVPDnxYL2QEgb4-Uo3foQ==/info
Home Depot
IN_STOCK ( In stock )
Free Shipping
2 in. hose kit fits 2 in. NPT dewatering and trash pumps. 20 ft. PVC suction hose with 2 in. couplings. 25 ft. blue discharge hose with 2 in. couplings and strainer.
More

Powerhorse Full Trash Water...

$249.99
Northern Tool Powerhorse Full Trash Water Pump ONLY - For Threaded Shafts, 3 Inch Ports, 11,820 GPH
+ $26.99 shipping
/powerhorse-full-trash/GU3JpC3kbqhrwLMry6Pq0Q==/info
Northern Tool
IN_STOCK ( In stock )
Powerhorse water pump gives you the performance you need, when you need it. Engine not included. Uses long-lasting, high-end silicon carbide seals that are specially suited for heavy-duty applications such as pumping contaminated and abrasive fluid. Requires 5.5 HP engine w/ 5/8in.-18 externally threaded shaft, 2 7/16in.L and 3 5/8in. bolt circle. s. Shaft Length in. 2 7/16, Shaft Type Externally threaded, Seals Silicon carbide, GPH 11,820, Impellers Cast iron, Solid Handling in. 1 1/4, Volute Cast iron, Bolt Circle in. 3 5/8, Dimensions L x W x H in. 11 x 13 x 14, Max. Total Head ft. 82, Port Size in. 3, Required HP 5 1/2. Silicon carbide seals are 2 times harder, 15 tougher, and 50 stronger than common aluminum oxide seals FCD45 cast iron impeller and volute reduce vibration and last... Less
More

Tsurumi 2 Trash Pump...

$305.00
Wayfair Tsurumi 2 Trash Pump HS2.4S-62/HSZ2.4S -62 Float Switch: Float Switch, Voltage: 110 Volts
Free Shipping
/tsurumi-2-trash-pump/sKGXx1boE-OeCrRh_0-o-g==/info
Wayfair
IN_STOCK ( In stock )
Store not rated
Free Shipping
Float Switch: Float Switch, Voltage: 110 Volts Tsurumi HS2.4S-62/HSZ2.4S- 62 This durable trash pump is powerful enough to get the job done and compact enough to use in almost any setting whether it be at home, in the office, or at a construction site.With reliable and innovative materials this water pump from Tsurumi is sure to please your needs and comes with an option for an automatic float switch that can detect the level of water and run without direct operation. Features: -Available with or without Float Switch.-Built-in shaft mounted agitator suspends solids.-Urethane Semi Vortex Impeller for maximum durability and pump performance.-Doubl e Inside Mechanical Seal with SiC faces provides longest operational life.-Oil Lifter provides lubrication of the seal faces.-Max Capacity: 53... Less
More

IPT by Gorman-Rupp Heavy-Duty...

$799.99
Northern Tool IPT by Gorman-Rupp Heavy-Duty Trash Pump - 3 Inch Ports, 18,000 GPH, 1 1/4 Inch Solids Capacity, 206cc Briggs & Stratton Intek Pro Engine, Model 3S5AR
+ $58.49 shipping
/ipt-by-gormanrupp/dlupMtBRnDqaNiZxby7o2g==/info
Northern Tool
IN_STOCK ( In stock )
This IPT Heavy-Duty Trash Pump is powered by a 206cc Briggs & Stratton Intek Pro. This high-volume self-priming centrifugal trash pump has a durable die cast aluminum pump housing and cast iron wear parts. Features removable/replace able discharge and suction ports, a built-in check valve and a heavy-duty steel frame. 3in. ports handle up to 1 1/4in. solids. EDPM gaskets and Viton seal. Includes free metal strainer. U.S.A. Pump Housing Cast aluminum, Seals Viton, Self-Priming Yes, Max. Suction Lift ft. 26, Engine Briggs & Stratton, Fits Hose Dia. in. 3, Flow GPH 18,000, Impellers Ductile, Engine Displacement cc 206, Engine Type Intek Pro, HP 5 1/2, Discharge Port in. 3, Suction Port in. 3, Volute Cast iron, Solid Handling in. 1 1/4, Start Type Recoil, Fuel Capacity gal. 0.87, Run Time 1... Less
More

Water and Trash Pump Strainer...

$52.88
Sears Marketplace Water and Trash Pump Strainer - 3in. [Misc.]
No Shipping Info
/water-and-trash-pump/A3-GvQdrnUb5dOC-n4OUiw==/info
Sears Marketplace
IN_STOCK ( In stock )
Water and Trash Pump Strainer - 3in. [Misc.]
More

IPT by Gorman-Rupp Trash Pump...

$999.99
Northern Tool IPT by Gorman-Rupp Trash Pump - 3 Inch Ports, 18,000 GPH, 1 1/4 Inch Solids Capacity, 160cc Honda OHV Engine, Model 3S5-HR
No Shipping Info
/ipt-by-gormanrupp-trash/IgYJZ7fTI95LyrX1B-HhAA==/info
Northern Tool
IN_STOCK ( In stock )
160cc HP Honda engine has EDPM gaskets and Viton seal. Includes Free metal strainer. Engine Displacement cc 160, Engine Type OHV, Pump Housing Cast aluminum, Seals Viton, Self-Priming Yes, Discharge Port in. 3, Engine Honda, Fits Hose Dia. in. 3, Flow GPH 18,000, HP 5 1/2, Impellers Ductile, Suction Port in. 3, Max. Suction Lift ft. 26, Volute Cast Iron, Solid Handling in. 1 1/4, Start Type Recoil, Max. PSI 47, Max. Total Head ft. 110. 3-year limited warranty on engine. Model Number: 3S5XHR. UPC: 726846519291.
More

2 Epdm Trash Pump Water...

$213.92
eBay 2 Epdm Trash Pump Water Suction W/100' Red Usa Discharge Complete Kit
+ $13.65 shipping
/2-epdm-trash-pump-water/ZSg2QtJMzvEAkJYgEcoLAw==/info
eBay
IN_STOCK ( In stock )
2 EPDM Rubber Trash Pump Water Suction Honda W/100' Red USA Discharge Hose Complete Kit Assembled in USA, creating local jobs! This kit includes: 1 - 2 x 20ft EPDM Rubber trash pump suction hose assembly installed with (1) ea Male Camlock and (1) ea Fem
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2014 eBay Inc. All Rights Reserved

Advertisement
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe.apimig.eek-23342
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe.apimig.eek-23342