Submersible "top discharge" slim - line dewatering pumps are designed for small diameter well casings and other hard to reach applications where other pumps are to large to fit the application space. Pumps are designed with heavy duty hard anodized aluminum and stainless steel hardware for long life and lighter weight. Pumps offer double mechanical seals, upper seal lubricator and class "H" motor insulation. Abraisive resistant stainless steel impellers ( 2 HP to 50 HP ) resist wear from sand , gravel and other abrasive materials. The built in strainer protects large particles from entering the pump. Pumps ( except model PF01311SCV) are supplied with a powder coated steel control enclosure which contains a circuit breaker which protects against short circuit, overload and locked rotor... Less

This Wayne 4in. deep well submersible delivers 10 gallons of water per minute for most residential needs. Submersible design eliminates the need for priming and creates quiet operation. Motor is hermetically sealed and contains built-in lighting protection. High efficiency motor is thermally protected to prevent overheating. U.S.A. HP: 1/2, Flow (GPH): 434 @ 60ft.D, 50PSI, Volts: 115, Max. Total Head (ft.): 120, Max. Suction Lift (ft.): 125, Max. PSI: 115, Suction Port (in.): 1, Discharge Port (in.): 1 1/4, Impellers: Thermoplastic for corrosion- resistance, Diffusers: Thermoplastic for corrosion- resistance, Intake screens: Thermoplastic for corrosion- resistance, Thermal Overload Protection: Yes, Dimensions L x W x H (in.): 4 x 4 x 24

Goulds Bruiser Pump 1/2 HP 10 GPM Submersible water well pump that features abrasive handling construction, stainless steel casing, and a check valve that can be easily removed for drain-back systems or replacement. Manufacturer: Goulds Model: 10SB05-412 Horsepower: 1/2 GPM: 10 Voltage: 230V, 60HZ Phase: Single-Phase, 3-wire Features: Abrasive Handling Construction: Impellers designed with flat wearing surface which provides effective sand handling capabilities. Powered for Continuous Operation: All ratings are within the working limits of the motor as recommended by the motor manufacturer. Pump can be operated continuously without damage to the motor. Metal Parts are Stainless Steel: AISI types 301 and 304 are corrosion resistant, non-toxic and non-leaching. Non-Metallic Parts are FDA... Less

Submersible "top discharge" slim - line dewatering pumps are designed for small diameter well casings and other hard to reach applications where other pumps are to large to fit the application space. Pumps are designed with heavy duty hard anodized aluminum and stainless steel hardware for long life and lighter weight. Pumps offer double mechanical seals, upper seal lubricator and class "H" motor insulation. Abraisive resistant stainless steel impellers ( 2 HP to 50 HP ) resist wear from sand , gravel and other abrasive materials. The built in strainer protects large particles from entering the pump. Pumps ( except model PF01311SCV) are supplied with a powder coated steel control enclosure which contains a circuit breaker which protects against short circuit, overload and locked rotor... Less

Pump, Deep Well Submersible, Number Of Wires 3, Control Box Required 1lzx2, 7 Gpm, 1/2 Hp, Voltage 115, 1 Phase, Stages 9, Built-in Check Valve, Pump Material Thermoplastic, Impeller Material Noryl, Discharge Port 1 1/4 In., Flow Ranges 10 - 4 Gpm, Max. Operating Temp. 86 F, Pump-motor Shell Stainless Steel, Max. Head 265 Ft., Well Capacity Low, Recommended Tank 4my59, 3ya59, Sf Amps 12

Goulds Bruiser Pump 1/2 HP 7 GPM Submersible water well pump that features abrasive handling construction, stainless steel casing, and a check valve that can be easily removed for drain-back systems or replacement. Manufacturer: Goulds Model: 7SB05-412 Horsepower: 1/2 GPM: 7 Voltage: 230V, 60HZ Phase: Single-Phase, 3-wire Features: Metal Parts are Stainless Steel: AISI types 301 and 304 are corrosion resistant, non-toxic and non-leaching. Non-Metallic Parts are FDA Compliant: Impellers, diffusers and bearing spiders are constructed of a glass filled, corrosion resistant engineered composite. Discharge Head: Engineered composite material for superior strength and corrosion resistance. Loops for safety line molded into head. Motor Adapter: Engineered composite material with high rigidity to... Less

Submersible "top discharge" slim - line dewatering pumps are designed for small diameter well casings and other hard to reach applications where other pumps are to large to fit the application space. Pumps are designed with heavy duty hard anodized aluminum and stainless steel hardware for long life and lighter weight. Pumps offer double mechanical seals, upper seal lubricator and class "H" motor insulation. Abraisive resistant stainless steel impellers ( 2 HP to 50 HP ) resist wear from sand , gravel and other abrasive materials. The built in strainer protects large particles from entering the pump. Pumps ( except model PF01311SCV) are supplied with a powder coated steel control enclosure which contains a circuit breaker which protects against short circuit, overload and locked rotor... Less

This Wayne 4in. deep well submersible delivers 10 gallons of water per minute for most residential needs. Submersible design eliminates the need for priming and creates quiet operation. Motor is he...

TB51S10-4 1/2 HP Stainless Steel Submersible Deep Well Pump 2.8 GPM @ 100' (50 PSI) Corrosion- Resistant Stainless Steel Motor Enclosure, Pump Shell, and Fasteners Heavy-Duty Thermoplastic Impellers, Diffusers, Intake Screen, and Check Valve High-Efficiency, Hermetically Sealed Motor is Thermally Protected to Prevent Overheating Submersible 4" Design Eliminates the Need for Priming and Creates Quiet Operation 2-Wire 120 Volts 1 - 1/4" NPT Discharge 20' - 120' Well Depth

For 4" inside diameter or larger wells. Pumps from depths of 400 ft. Floating stack design for sand resistance and reduced sand locking. Corrosion- resistant stainless steel pump and motor housing. Heavy-duty discharge connection. Precision-molded impellers and diffusers. Includes built-in check valve. Water filled submersible motor. 1-1/4" NPT.

Pump, Deep Well Submersible, Number Of Wires 3, Control Box Required 1lzx3, 7 Gpm, 1/2 Hp, Voltage 230, 1 Phase, Stages 9, Built-in Check Valve, Pump Material Thermoplastic, Impeller Material Noryl, Discharge Port 1 1/4 In., Flow Ranges 10 - 4 Gpm, Max. Operating Temp. 86 F, Pump-motor Shell Stainless Steel, Max. Head 265 Ft., Well Capacity Low, Recommended Tank 4my59, 3ya60, Sf Amps 6

2-Wire (plus ground) 1 HP, 230V, 3450 RPM, 60 Hz, 1 PH, 15 stage Franklin Electric submersible motor Made of non-corrosive 316 stainless steel NEMA standard stainless steel interchangeable pump end Precision machined stainless steel impellers and diffusers 1-1/4 inch NPT stainless steel discharge 48" motor lead Thermally protected Built-in lightening arrestor Built-in suction screen to prevent pump damage from abrasive material Large cable guard to accommodate motor lead Built-in safety rope adaptor Manufactured for long term endurance and performance Performance (Gallons Per Hour @ 50 PSI): 759 GPH @ 100'; 720 GPH @ 120'; 684 GPH @ 140'; 647 GPH @ 160'; 610 GPH @ 180'; 571 GPH @ 200'; 510 GPH @ 225' Optimum Performance Range with 20/40 PSI pressure switch: 156' to 267' Optimum... Less

TB75S10-4 3/4 HP Stainless Steel Submersible Deep Well Pump 8.9 GPM @ 100' (50 PSI)Corrosion- Resistant Stainless Steel Motor Enclosure, Pump Shell, and Fasteners Heavy-Duty Thermoplastic Impellers, Diffusers, Intake Screen, and Check Valve High-Efficiency, Hermetically Sealed Motor is Thermally Protected to Prevent Overheating Submersible 4" Design Eliminates the Need for Priming and Creates Quiet Operation 2-Wire 240 Volts 1 - 1/4" NPT Discharge 20' - 175' Well Depth Shipping Weight, 27 lbs If

Submersible "top discharge" slim - line dewatering pumps are designed for small diameter well casings and other hard to reach applications where other pumps are to large to fit the application space. Pumps are designed with heavy duty hard anodized aluminum and stainless steel hardware for long life and lighter weight. Pumps offer double mechanical seals, upper seal lubricator and class "H" motor insulation. Abraisive resistant stainless steel impellers ( 2 HP to 50 HP ) resist wear from sand , gravel and other abrasive materials. The built in strainer protects large particles from entering the pump. Pumps ( except model PF01311SCV) are supplied with a powder coated steel control enclosure which contains a circuit breaker which protects against short circuit, overload and locked rotor... Less

T50S10-4 Features: -Deep well submersible pump.-Material: Stainless steel.-For wells 240'' - 1440'' in depth.-High efficiency, hermetically sealed motor for long life.-1.25'' NPT discharge.-Maximum 2796'' shut-off head (101 PSI).-Motor enclosure, pump shell and fasteners.-Engine HP: 1/2.-Phase: Single-phase. Specifications: -Voltage: 230V (2 wires). Dimensions: -Submersible 4'' design for easy installation and quiet operation.-Pumps up to 434 GPH @ 720'' depth - (50 PSI). Warranty: -1-Year warranty.

Submersible "top discharge" slim - line dewatering pumps are designed for small diameter well casings and other hard to reach applications where other pumps are to large to fit the application space. Pumps are designed with heavy duty hard anodized aluminum and stainless steel hardware for long life and lighter weight. Pumps offer double mechanical seals, upper seal lubricator and class "H" motor insulation. Abraisive resistant stainless steel impellers ( 2 HP to 50 HP ) resist wear from sand , gravel and other abrasive materials. The built in strainer protects large particles from entering the pump. Pumps ( except model PF01311SCV) are supplied with a powder coated steel control enclosure which contains a circuit breaker which protects against short circuit, overload and locked rotor... Less

Pump, Deep Well Submersible, Number Of Wires 2, 7 Gpm, 1/2 Hp, Voltage 230, 1 Phase, Stages 9, Built-in Check Valve, Pump Material Thermoplastic, Impeller Material Noryl, Discharge Port 1 1/4 In., Flow Ranges 10 - 4 Gpm, Max. Operating Temp. 86 F, Pump-motor Shell Stainless Steel, Max. Head 265 Ft., Well Capacity Low, Recommended Tank 4my59, 3ya56, Sf Amps 6

Burcam model 105307ST submersible deep well pump Designed to fit inside 4-inch or larger well casing 3-wire 1/2 HP 230V 3450 RPM 1 PH 6 stage Includes 1/2 HP control box Stainless steel shell Precision machined noryl suction, discharge, impellers and diffusers Built-in check valve Built-in screen to prevent damage from abrasive debris Built-in safety rope adapter Built-in lightening arrestor Large cable guard Performance (Gallons per hour @ discharge height @ 30 PSI): 868 GPM @ 20'; 809 GPM @ 40'; 734 GPM @ 60'; 668 GPM @ 80'; 602 GPM @ 100'; 508 GPM @ 120'; 396 GPM @ 140'; 252 GPM @ 160' IMPORTANT INFORMATION ABOUT DEEP WELL SUBMERSIBLE PUMPS: 2-wire pumps have a total of 3 wires (2 wires plus ground.) They do NOT require a control box to start. There is a starter capacitor built into... Less

Economical, energy-efficient pumps for 4in. inside diameter or larger wells. Pumps from depths of 100 feet. Patented Floating Stack design resists sand and reduces sand locking. Stainless steel pump and motor housing for long life. Heavy-duty 1 1/4in. NPT discharge connection. Water-filled submersible motor. Precision-molded impellers and diffusers. 230 Volts. Includes built-in check valve. UL approved. U.S.A. HP: 1/2, Flow (GPH): 600, Volts: 230, Amps: 5, Max. Total Head (ft.): 150, Max. PSI: 60 - 70, Suction Port (in.): 1 1/4, Discharge Port (in.): 1 1/4, Pump Housing: Stainless steel, Impellers: Precision- molded, Diffusers: Precision- molded, Control Box Included: No

3-Wire (plus ground) 1/2 HP, 230V, 3450 RPM, 60 Hz, 1 PH, 15 Stage submersible motor Made of non-corrosive 316 stainless steel NEMA standard stainless steel interchangeable pump end Precision machined stainless steel impellers and diffusers 1-1/4 inch NPT stainless steel discharge 48" motor lead Thermally protected Built-in lightening arrestor Built-in suction screen to prevent pump damage from abrasive material Large cable guard to accommodate motor lead Built-in safety rope adaptor Manufactured for long term endurance and performance Performance (Gallons Per Hour @ 50 PSI): 734 GPH @ 20'; 671 GPH @ 40'; 610 GPH @ 60'; 542 GPH @ 80'; 443 GPH @ 100'; 271 GPH @ 120' Optimum Performance Range with 20/40 PSI pressure switch: 73' to 123' Optimum Performance Range with 30/50 PSI pressure... Less

Pump Head, Submersible Well, 35 Gpm, Material Stainless Steel, Required Motor Hp 2, Gpm @ Vertical Depth To Water @ 100 Ft @ 50 Psi 25, Gpm @ Vertical Depth To Water @ 200 Ft @ 50 Psi -, Impeller Material Glass Filled Noryl, Pump-motor Shell Stainless Steel, Built-in Check Valve No, Seal Type -, Bearing Type Ceramic/rubber, Recommended Tank 1xhh4, Max. Head (ft.) 288, Well Capacity High, 15-45, Gpm Of Water @ 20 Ft @ 30, 50 Psi 44 38, Gpm Of Water @ 40 Ft @ 30, 50 Psi 41 35, Shut Off (psi) 288

Economical, energy-efficient pumps for 4in. inside diameter or larger wells. Pump from depths of 400ft. Patented Floating Stack design resists sand and reduces sand locking. Stainless steel pum...

Goulds Bruiser Pump 3/4 HP 10 GPM 2-Wire - no control box needed Submersible water well pump that features abrasive handling construction, stainless steel casing , and a check valve that can be easily removed for drain-back systems or replacement. Manufacturer: Goulds Model: 10SB07-422 Horsepower: 3/4 GPM: 10 Voltage: 230V, 60HZ Phase: Single-Phase, 2-wire Features: Abrasive Handling Construction: Impellers designed with flat wearing surface which provides effective sand handling capabilities.

Pump, Deep Well Submersible, Number Of Wires 2, 7 Gpm, 1/2 Hp, Voltage 115, 1 Phase, Stages 9, Built-in Check Valve, Pump Material Thermoplastic, Impeller Material Noryl, Discharge Port 1 1/4 In., Flow Ranges 10 - 4 Gpm, Max. Operating Temp. 86 F, Pump-motor Shell Stainless Steel, Max. Head 265 Ft., Well Capacity Low, Recommended Tank 4my59, 3ya57, Sf Amps 12

Burcam model 105133 submersible deep well pump Designed to fit inside 4-inch or larger well casing 2-wire 1/2 HP 230V 3450 RPM 1 PH 6 stage Stainless steel shell, suction and discharge Precision machined noryl impellers and diffusers Built-in check valve Polyethylene screen to prevent damage from abrasive debris Built-in safety rope adapter Built-in lightening arrestor Large cable guard Performance (Gallons per hour @ discharge height @ 30 PSI): 749 GPM @ 20'; 683 GPM @ 40'; 614 GPM @ 60'; 534 GPM @ 80'; 459 GPM @ 100'; 389 GPM @ 120'; 318 GPM @ 140'; 234 GPM @ 160'; 106 GPM @ 180' IMPORTANT INFORMATION ABOUT DEEP WELL SUBMERSIBLE PUMPS: 2-wire pumps have a total of 3 wires (2 wires plus ground.) They do NOT require a control box to start. There is a starter capacitor built into the... Less

Economical, energy-efficient pumps for 4in. inside diameter or larger wells. Pump from depths of 200 feet. Patented Floating Stack design resists sand and reduces sand locking. Stainl...

Submersible "top discharge" slim - line dewatering pumps are designed for small diameter well casings and other hard to reach applications where other pumps are to large to fit the application space. Pumps are designed with heavy duty hard anodized aluminum and stainless steel hardware for long life and lighter weight. Pumps offer double mechanical seals, upper seal lubricator and class "H" motor insulation. Abraisive resistant stainless steel impellers ( 2 HP to 50 HP ) resist wear from sand , gravel and other abrasive materials. The built in strainer protects large particles from entering the pump. Pumps ( except model PF01311SCV) are supplied with a powder coated steel control enclosure which contains a circuit breaker which protects against short circuit, overload and locked rotor... Less

Economical, energy-efficient single phase Flotec 2-Wire Submersible Deep Well Pump for 4in. inside diameter or larger wells. Pump from depths up to 300 feet. Patented Floating Stack...

DETAILS: Burcam model 105339ST s ubmersible deep well pump Designed to fit inside 4-inch or larger well casing 2-wire 3/4 HP 230V 3450 RPM 1 PH 8 stage Stainless steel shell Precision machined noryl suction, discharge, impellers and diffusers Built-in check valve Built-in screen to prevent damage from abrasive debris Built-in safety rope adapter Built-in lightening arrestor Large cable guard Performance (Gallons per hour @ discharge height @ 30 PSI):879 GPM @ 20';849 GPM @ 40';817 GPM @ 60';782

Economical, energy-efficient single phase Flotec 2-Wire Submersible Deep Well Pump for 4in. inside diameter or larger wells. Pump from depths up to 300 feet. Patented Floating Stack design resists sand and reduces sand locking. Stainless steel pump and motor housing for long life. Heavy-duty 1 1/4in. NPT discharge connection. Water-filled submersible motor. Precision-molded impellers and diffusers. 230 Volts. UL approved. U.S.A. HP: 1, Flow (GPH): 600, Volts: 230, Amps: 8.28, Max. Total Head (ft.): 300, Suction Port (in.): 1 1/4, Discharge Port (in.): 1 1/4, Pump Housing: Stainless steel, Impellers: Precision molded, Diffusers: Precision molded, Control Box Included: No