Submersible "top discharge" slim - line dewatering pumps are designed for small diameter well casings and other hard to reach applications where other pumps are to large to fit the application space. Pumps are designed with heavy duty hard anodized aluminum and stainless steel hardware for long life and lighter weight. Pumps offer double mechanical seals, upper seal lubricator and class "H" motor insulation. Abraisive resistant stainless steel impellers ( 2 HP to 50 HP ) resist wear from sand , gravel and other abrasive materials. The built in strainer protects large particles from entering the pump. Pumps ( except model PF01311SCV) are supplied with a powder coated steel control enclosure which contains a circuit breaker which protects against short circuit, overload and locked rotor... Less

This Wayne 4in. deep well submersible delivers 10 gallons of water per minute for most residential needs. Submersible design eliminates the need for priming and creates quiet operation. Motor is hermetically sealed and contains built-in lighting protection. High efficiency motor is thermally protected to prevent overheating. U.S.A. HP: 1/2, Flow (GPH): 434 @ 60ft.D, 50PSI, Volts: 115, Max. Total Head (ft.): 120, Max. Suction Lift (ft.): 125, Max. PSI: 115, Suction Port (in.): 1, Discharge Port (in.): 1 1/4, Impellers: Thermoplastic for corrosion- resistance, Diffusers: Thermoplastic for corrosion- resistance, Intake screens: Thermoplastic for corrosion- resistance, Thermal Overload Protection: Yes, Dimensions L x W x H (in.): 4 x 4 x 24

Submersible "top discharge" slim - line dewatering pumps are designed for small diameter well casings and other hard to reach applications where other pumps are to large to fit the application space. Pumps are designed with heavy duty hard anodized aluminum and stainless steel hardware for long life and lighter weight. Pumps offer double mechanical seals, upper seal lubricator and class "H" motor insulation. Abraisive resistant stainless steel impellers ( 2 HP to 50 HP ) resist wear from sand , gravel and other abrasive materials. The built in strainer protects large particles from entering the pump. Pumps ( except model PF01311SCV) are supplied with a powder coated steel control enclosure which contains a circuit breaker which protects against short circuit, overload and locked rotor... Less

TB75S10-2 3/4 HP Stainless Steel Submersible Deep Well Pump 8.9 GPM @ 100' (50 PSI)Corrosion- Resistant Stainless Steel Motor Enclosure, Pump Shell, and Fasteners Heavy-Duty Thermoplastic Impellers, Diffusers, Intake Screen, and Check Valve High-Efficiency, Hermetically Sealed Motor is Thermally Protected to Prevent Overheating Submersible 4" Design Eliminates the Need for Priming and Creates Quiet Operation 3-Wire (Must be used with a Control Box, See Well Accessory Section)240 Volts 1 - 1/4" N

Pump, Compact Submersible, 1/30 Hp, Voltage 115, 60 Hz, Full Load Amps 1.3, Full Load Watts 75, (m)npt Outlet (in.) 3/8, Overload Protection Thermal, Screen Material Nylon, Length 4 1/2 In., Width 2 7/8 In., Height 4 5/8 In., Max. Head 12 Ft., Cord Length 6 Ft., Impeller Material Acetal Copolymer, Inlet Type Screened, Outlet Hose I.d. 5/8 In., Seal Material Viton, Volute Material Acetal Copolymer

Submersible "top discharge" slim - line dewatering pumps are designed for small diameter well casings and other hard to reach applications where other pumps are to large to fit the application space. Pumps are designed with heavy duty hard anodized aluminum and stainless steel hardware for long life and lighter weight. Pumps offer double mechanical seals, upper seal lubricator and class "H" motor insulation. Abraisive resistant stainless steel impellers ( 2 HP to 50 HP ) resist wear from sand , gravel and other abrasive materials. The built in strainer protects large particles from entering the pump. Pumps ( except model PF01311SCV) are supplied with a powder coated steel control enclosure which contains a circuit breaker which protects against short circuit, overload and locked rotor... Less

Goulds Bruiser Pump 1/2 HP 7 GPM Submersible water well pump that features abrasive handling construction, stainless steel casing, and a check valve that can be easily removed for drain-back systems or replacement. Manufacturer: Goulds Model: 7SB05-412 Horsepower: 1/2 GPM: 7 Voltage: 230V, 60HZ Phase: Single-Phase, 3-wire Features: Metal Parts are Stainless Steel: AISI types 301 and 304 are corrosion resistant, non-toxic and non-leaching. Non-Metallic Parts are FDA Compliant: Impellers, diffusers and bearing spiders are constructed of a glass filled, corrosion resistant engineered composite. Discharge Head: Engineered composite material for superior strength and corrosion resistance. Loops for safety line molded into head. Motor Adapter: Engineered composite material with high rigidity to... Less

TB51S10-4 1/2 HP Stainless Steel Submersible Deep Well Pump 2.8 GPM @ 100' (50 PSI) Corrosion- Resistant Stainless Steel Motor Enclosure, Pump Shell, and Fasteners Heavy-Duty Thermoplastic Impellers, Diffusers, Intake Screen, and Check Valve High-Efficiency, Hermetically Sealed Motor is Thermally Protected to Prevent Overheating Submersible 4" Design Eliminates the Need for Priming and Creates Quiet Operation 2-Wire 120 Volts 1 - 1/4" NPT Discharge 20' - 120' Well Depth

This Wayne 4in. deep well submersible delivers 10 gallons of water per minute for most residential needs. Submersible design eliminates the need for priming and creates quiet operation. Motor is he...

Submersible "top discharge" slim - line dewatering pumps are designed for small diameter well casings and other hard to reach applications where other pumps are to large to fit the application space. Pumps are designed with heavy duty hard anodized aluminum and stainless steel hardware for long life and lighter weight. Pumps offer double mechanical seals, upper seal lubricator and class "H" motor insulation. Abraisive resistant stainless steel impellers ( 2 HP to 50 HP ) resist wear from sand , gravel and other abrasive materials. The built in strainer protects large particles from entering the pump. Pumps ( except model PF01311SCV) are supplied with a powder coated steel control enclosure which contains a circuit breaker which protects against short circuit, overload and locked rotor... Less

For 4" inside diameter or larger wells. Pumps from depths of 400 ft. Floating stack design for sand resistance and reduced sand locking. Corrosion- resistant stainless steel pump and motor housing. Heavy-duty discharge connection. Precision-molded impellers and diffusers. Includes built-in check valve. Water filled submersible motor. 1-1/4" NPT.

Pump, Compact Submersible, 1/50 Hp, Voltage 115, 60 Hz, Full Load Amps 1.3, Full Load Watts 75, (m)npt Outlet (in.) 3/8, Overload Protection Thermal, Screen Material Nylon, Length 4 1/2 In., Width 2 7/8 In., Height 4 5/8 In., Max. Head 12 Ft., Cord Length 20 Ft., Impeller Material Acetal Copolymer, Inlet Type Screened, Outlet Hose I.d. 5/8 In., Seal Material Viton, Volute Material Acetal Copolymer

TB75S10-4 3/4 HP Stainless Steel Submersible Deep Well Pump 8.9 GPM @ 100' (50 PSI)Corrosion- Resistant Stainless Steel Motor Enclosure, Pump Shell, and Fasteners Heavy-Duty Thermoplastic Impellers, Diffusers, Intake Screen, and Check Valve High-Efficiency, Hermetically Sealed Motor is Thermally Protected to Prevent Overheating Submersible 4" Design Eliminates the Need for Priming and Creates Quiet Operation 2-Wire 240 Volts 1 - 1/4" NPT Discharge 20' - 175' Well Depth Shipping Weight, 27 lbs If

Grinder pump Stainless steel shaft, cutter, shredding ring and hardware Tandem double mechanical seal, upper - Carbon/Ceramic/Bu na-N, lower silicon Carbide/ Viton Cast iron housing and volute 12 Vane, vortex impeller Dual voltage motor Requires overload protection in control panel Upper and intermediate single row ball bearings and lower sleeve bearing Liquid temperatures up to 104 degree F intermittent Manual operation 5 HP 11 amps 460 Volt 3 Phase 60 Hz 3450 RPM 30 Feet cord Dimensions: 28.5" H x 13.7" W x 9.12" D

Submersible Effluent Pumps Are Ideal For A Variety Of Applications Including Homes, Farms, Trailer Courts, Motels, Schools, Hospitals, Industry & Effluent Systems. This effluent pump is made with cast iron, volute type casing with 2" NPT discharge for maximum efficiency. Semi-open, non-clog cast iron impeller has pump-out vanes for mechanical seal protection. Impeller is balanced for smooth operation. Includes 300 series stainless steel fasteners. Effluent pumps are capable of running dry without damage to components. Withstands solids up to 3/4". Continuous-duty motor is fully submerged in high grade turbine oil for lubrication and efficient heat transfer. O-ring assures positive sealing against contaminants and oil leakage. Upper and lower heavy duty ball bearing construction... Less

Pump, Compact Submersible, 1/30 Hp, Voltage 230, 50/60 Hz, Full Load Amps 0.6, Full Load Watts 75, (m)npt Outlet (in.) 3/8, Overload Protection Thermal, Screen Material Nylon, Length 4 1/2 In., Width 2 7/8 In., Height 5 3/8 In., Max. Head 12 Ft., Cord Length 6 Ft., Impeller Material Acetal Copolymer, Inlet Type Screened, Outlet Hose I.d. 5/8 In., Seal Material Viton, Volute Material Acetal Copolymer

Submersible "top discharge" slim - line dewatering pumps are designed for small diameter well casings and other hard to reach applications where other pumps are to large to fit the application space. Pumps are designed with heavy duty hard anodized aluminum and stainless steel hardware for long life and lighter weight. Pumps offer double mechanical seals, upper seal lubricator and class "H" motor insulation. Abraisive resistant stainless steel impellers ( 2 HP to 50 HP ) resist wear from sand , gravel and other abrasive materials. The built in strainer protects large particles from entering the pump. Pumps ( except model PF01311SCV) are supplied with a powder coated steel control enclosure which contains a circuit breaker which protects against short circuit, overload and locked rotor... Less

Grinder pump Stainless steel shaft, cutter, shredding ring and hardware Inboard, Carbon/Ceramic/Bu na-N tandem double mechanical seal Bronze, 12 vane, vortex impeller Cast iron housing and volute Dual voltage motor Upper and intermediate single row ball bearings and lower sleeve bearing Liquid temperatures up to 160 degree F intermittent Manual operation High head 2 HP 11 amps 200 Volt 3 Phase 60 Hz 3450 RPM 20 Feet cord Dimensions: 19.42" - 23.09" H x 11.25" W x 9.21" D Dimensions & Weights 110 lbs 19"H X 9"D X 11"W

M282 Zoeller Automatic Waste-Mate Submersible Pump 1/2 HP Automatic 1/2 HP Single Seal Non-clogging vortex impeller. Durable cast construction. Stainless steel screws, bolts, float rod, handle, guard and arm and seal assembly. Shaft Seal - Carbon & ceramic rotary face seal, with stainless steel wetted parts. UL Listed 3-wire neoprene cord and plug. 10 ft. standard for automatic. Upper sleeve bearing and lower ball bearing running in a bath of oil. Maximum temperature for sewage or dewatering 130°F (54°C). Corrosion resistant powder coated epoxy finish. On point 15 1/4", Off point 5 1/4". Major width 13 9/16". Major height 18 13/16". (Single seal pumps)

Submersible Effluent Pumps Are Ideal For Mound Systems, Effluent & Dosing Systems, Low Pressure Pipe Systems, Basement Draining And Dewatering. This heavy duty, yet portable effluent pump is made with a corrosion resistant cast iron body. Effluent pump features a thermoplastic impeller and cover for added strength. Upper sleeve and lower heavy duty ball bearing construction for long life. Withstands solids up to 1/2". Continuous-duty, oil-filled motor is permanently lubricated and features built-in thermal overload protection with automatic reset. Stainless steel fasteners. High strength carbon steel shaft. Class B insulation. Includes quick disconnect 20'L power cord. CSA listed. Pump features 0.5 horsepower, 3400 RPM, 230 volts, 1 phase, 4.7 amps. Discharge head measures 1-1/2" and... Less

Economical, energy-efficient pumps for 4in. inside diameter or larger wells. Pump from depths of 200 feet. Patented Floating Stack design resists sand and reduces sand locking. Stainl...

2-Wire (plus ground) 1 HP, 230V, 3450 RPM, 60 Hz, 1 PH, 15 stage Franklin Electric submersible motor Made of non-corrosive 316 stainless steel NEMA standard stainless steel interchangeable pump end Precision machined stainless steel impellers and diffusers 1-1/4 inch NPT stainless steel discharge 48" motor lead Thermally protected Built-in lightening arrestor Built-in suction screen to prevent pump damage from abrasive material Large cable guard to accommodate motor lead Built-in safety rope adaptor Manufactured for long term endurance and performance Performance (Gallons Per Hour @ 50 PSI): 759 GPH @ 100'; 720 GPH @ 120'; 684 GPH @ 140'; 647 GPH @ 160'; 610 GPH @ 180'; 571 GPH @ 200'; 510 GPH @ 225' Optimum Performance Range with 20/40 PSI pressure switch: 156' to 267' Optimum... Less

Pump, Compact Submersible, 1/20 Hp, Voltage 115, 60 Hz, Full Load Amps 2.6, Full Load Watts 150, (m)npt Outlet (in.) 1/2, Overload Protection Thermal, Screen Material Nylon, Length 4 1/8 In., Width 5 In., Height 4 1/2 In., Max. Head 18 Ft., Cord Length 6 Ft., Impeller Material Acetal Copolymer, Inlet Type Screened, Outlet Hose I.d. 3/4 In., Seal Material Viton, Volute Material Acetal Copolymer

Submersible Sump & Effluent Pumps are designed for basement drainage, septic tank effluent, dewatering, dosing systems and low pressure piping systems. Heavy duty cast iron construction, corrosion resistant powder coated finish, long life seal and bearing design. Motor is class "B" insulation, thermally protected and oil filled for premium cooling and lubrication. Automatic models offer a "piggy-back" type level control. CSA Listed. 11.50 L. 9.00 W. 13.50 H.

Tsurumi Pumps Submersible Trash Pump-3000 GPH 1/2 HP 2in #HS2.4S Northern Tool Item# 108200 Item Weight: 28 lb(s) Product Information: New The Tsurumi Pumps submersible trash pump features a shaft-mounted agitator that handles solids up to 1in. x 3/8in. Application: Pump, Flow (GPH): 3,000, Volts: 110, Amps: 5 3/8, HP: 1/2, Max. Total Head (ft.): 39, Suction Port (in.): 3/8, Discharge Port (in.): 2, Impeller Shaft: Semi-Vortex, Seals: Double mechanical, Power Cord (ft.): 20, Thermal Overload Protection: Yes Ductile cast iron housing for durability and corrosion resistance Double mechanical seals for long life Built in Thermal Protector Stainless steel shaft Performance range capacity head: 5ft-34ft. Max. water temp: 104°F Urethane rubber impeller Aluminum alloy motor frame 304 stainless... Less

1/2HP PSC Submersible Sewage Pump The 10SN Series submersible pump from Little Giant is specifically engineered to handle the tough, demanding tasks of effluent and sewage waste transfer with high efficiency and long term dependability. For use in residential, commercial, industrial and agricultural applications with light to medium transfer demands. Applications include dewatering, effluent waste, wastewater and sewage handling where such materials must be moved upward from a collection area to sewer or septic lines, or drainage areas. Features: 1/2 HP PSC motor with overload protection Designed for continuous duty Epoxy coated cast iron housing and volute 2" FNPT discharge; Nitrile with carbon and ceramic faces Upper sintered and lower ball bearings Non-clog thermoplastic Elastomer... Less

Submersible Sump & Effluent Pumps are designed for basement drainage, septic tank effluent, dewatering, dosing systems and low pressure piping systems. Heavy duty cast iron construction, corrosion resistant powder coated finish, long life seal and bearing design. Motor is class "B" insulation, thermally protected and oil filled for premium cooling and lubrication. Automatic models offer a "piggy-back" type level control. CSA Listed. 11.50 L. 9.00 W. 13.50 H.

This Franklin 4in. deep well submersible delivers 10 GPM of water to meet most residential needs. Submersible design eliminates the need for priming and creates quiet operation. U.S.A. HP: 1/2, Flo...

Submersible Sump & Effluent Pumps are designed for basement drainage, septic tank effluent, dewatering, dosing systems and low pressure piping systems. Heavy duty cast iron construction, corrosion resistant powder coated finish, long life seal and bearing design. Motor is class "B" insulation, thermally protected and oil filled for premium cooling and lubrication. Automatic models offer a "piggy-back" type level control. CSA Listed. 11.50 L. 9.00 W. 13.50 H.

Grinder pump Stainless steel shaft, cutter, shredding ring and hardware Tandem double mechanical seal, upper - Carbon/Ceramic/Bu na-N, lower silicon Carbide/ Viton Cast iron housing and volute 12 Vane, vortex impeller Dual voltage motor Requires overload protection in control panel Upper and intermediate single row ball bearings and lower sleeve bearing Liquid temperatures up to 104 degree F intermittent Manual operation 3 HP 17 amps 208 Volt 3 Phase 60 Hz 3450 RPM 30 Feet cord Dimensions: 28.5" H x 13.7" W x 9.12" D