BRAND NEW 5.5HP GAS WATER PUMP 2" OUTLET 5.5 HP NPT New 5.5 HP Commercial Water Pump Part No. CSWP20CX 4 STROKE OHV SINGLE CYLINDER AIR COOLED FUEL TYPE UNLEADED 86 OCTANE OR HIGHER SUCTION/DISCHARGE PORT DIAMETER 50MM (2 INCHES) MAX SUCTION HEAD 8M (26.2 FT) TOTAL HEAD 28M (90.3 FT) 52.8 LBS. 19.6 X 14.5 X 17.4 INCHES ENGINE TYPE GAS SINGLE CYLINDER 4 STROKE ENGINE SPEED 3600 RPM ENGINE DISPLACEMENT 163CC CONTINUOUS OUTPUT 5.5 HP MAXIMUM OUTPUT 5.5 HP FEATURES EFFICIENT AIR CLEANER SYSTEM

6.5HP engine makes this pump quiet, powerful and dependable! Silicon carbide mechanical seal lasts much longer than ceramic seals and is far more resistant to corrosion, wear and heat. 2in. inlet and outlet. Includes FREE wrench and strainer. Specifications Inlet and outlet diameter: 2 " (50 mm) Max. lift head: 92 ft (28 m) Max. suction head: 26 ft (8m) Max. flow rate: 158 GPM (600L/Min) Engine: Displacement: 169 ml Max. power: 4.8 kw (6.5HP) / 3600 rpm Engine: type: OHV25 Tilt single cylinder forced air cooling, 4 stroke Fuel tank capacity: 1 US gallon Oil capacity: 20 oz

Engine Driven Centrifugal Pump, 5.5 Hp, Engine Brand Honda, Engine/motor Type Gas, Tank Capacity (qt.) 3.3, Npt Port (in.) 2, Material Of Construction Polypropylene, Impeller Polypropylene, Impeller Type Open, Max. Pressure (psi) 55, Engine Rpm 3600, Max. Head (ft.) 120, Max. Suction Lift (ft.) 15, Roll Bar Frame None, Temp. Range (f) 32 To 150, Self-priming Yes, Agency Compliance Epa

PRODUCT DESCRIPTION SHIPPING INFORMATION PAYMENT INFORMATION PICK UP 1877-969-4638 GAS PUMP A588~A697 2" Input / Output Port, WITH backflow check valve Corrosion Protected shell Heavy Duty Steel Frame CARB /EPA Approved!What's included in the box Water pump Intake hose end strainer Threaded hose ends Threaded hose connectors Clamps Name: Gasoline engine self-primed centrifugal pump Engine model: 152F Nominal diameter: 50mm(2)Pump delivery: 9m3/h Pump lift: 66 Run speed: 3600r/min Suct

Engine Driven Centrifugal Pump, 3.5 Hp, Engine Brand Briggs & Stratton, Engine/motor Type Gas, Tank Capacity (qt.) 3, Npt Port (in.) 2, Material Of Construction Polypropylene, Impeller Polypropylene, Impeller Type Open, Max. Pressure (psi) 55, Engine Rpm 3600, Max. Head (ft.) 120, Max. Suction Lift (ft.) 15, Roll Bar Frame None, Temp. Range (f) 32 To 150, Self-priming Yes, Agency Compliance Epa

01012154435 Volts / Hz: 115V / 60Hz The company that has always been the forerunner in condensate removal pump design, introduces the new generation VCMA Series. Adding features for every installation, with guaranteed serviceability and unmatched reliability, Little Giant Pump Company once again defines state-of-the-art in pump design. Features: -Fully Automatic - 1/2 gallon leakproof, rustproof, high impact ABS tank - 3 drain holes - Removable 3/8'' barbed check valve - New generation float arm for enhanced reliability - Thermal overload protection - Optional safety switch - Suitable for High-Efficiency, Gas-Fumace Condensate - ABS plastic motor and tank cover, and volute - Polypropylene Impeller - Stainless steel shaft - Snap-action switch - 6' power cord with 3-pronged plug - Includes... Less

Engine Driven Centrifugal Pump, 6.5 Hp, Engine Brand Briggs & Stratton, Engine/motor Type Gas, Tank Capacity (qt.) 4, Npt Port (in.) 2, Material Of Construction Polypropylene, Impeller Polypropylene, Impeller Type Open, Max. Pressure (psi) 55, Engine Rpm 3600, Max. Head (ft.) 120, Max. Suction Lift (ft.) 15, Roll Bar Frame None, Temp. Range (f) 32 To 150, Self-priming Yes, Agency Compliance Epa

Durable Frame, Easy to move, light weight pump. Perfect for job sites or home use.2 Inch Water/Semi Trash pump. Comes with parts and accessories. 50ZB26-4Q (EPA/CARB) SPECIFICATION Water pump model: 50ZB26-4Q (EPA/CARB)Name: Gasoline engine centrifugal pump Engine model: 168F- 5.5 hp engine Max output: 4.0kw Nominal diameter: 50mm(2)Pump delivery: 25m3/h Pump lift: 26m Run speed: 3600r/min Efficiency: 48%Suction heignt: 6m Suction time: 180sec NET WEIGHT 52lbs DIMENSIONS 19.6 X 14.5 X 17.4 i

Hydroponic System Grow Light Set Grow Tent Fan Filter Light Bulb Hydro Accessories Inside Home Aquarium Fish Baby Furniture Baby Bedding Baby Kids Heater Other Outdoor Garden Pump Canopy Tent Other Call Toll Free 1-877 969 4638 From 11am-7pm (Mon-Fri) Pacific Standard Time

2HP 40CC Gas Water Pump 1" Suction 2 stroke Brand NEW! Features Include: Lightweight and easy to start, 2 stroke 40cc Engine Air Cooled Two Cycle Engine Adjustable Speed controller Suction and Discharge Port 1" Aprox 1700 GPH transfer fluid rate Aprox 2HP 1.45kW Suction Water Head: 26ft Run speed: 7000r/min Suction heignt: 13ft 0.95L Gas Tank Dimension(L W H):13"9"13" included: Intake hose end strainer , Threaded hose connectors , Clamps Model: WP10 Shipping Policies Domestic Estimated delivery

Engine Driven Pump, 6 Hp, Engine Brand Koshin, Engine/motor Type Gas, Tank Capacity 3.8 Qt., 9840 Gph, 2 In, Npt, Material Of Construction Aluminum, Semi-open, Cast Iron Impeller, 1/8 In Solids Handling, Max. Pressure 35.5 Psi, 3600 Rpm, Max. Head 82 Ft., Max. Suction Lift 26 Ft., Temp. Range 41 To 113f, Self-priming, Agency Compliance Epa/carb, Includes Manual

2.5HP Gas Simi-Trash 1-1/2" Water Pump 4 Stroke Over All Dimension: 14"H x 15" X 12" Brand New Type: 4 Stroke, Single Cylinder, Air Forced Cooling, Valve Sided Ignition Style: Non-Contact Transistorized Ignition Lubrication Style: Splash Start Type: Recoil Fuel Consumption (g/kw.h): 450 Bore X Stroke (mm): 52 x 46 mm Displacement (ml): 87 ml Gallon Per Min.: 52(GPM) Maximum Power/Rev (kw/rpm): 1.5kw / 3600rpm Maximum Torque (N.m/rpm): 4.0nm / 3000rpm Net Weight: 28lb Dimension: 14"H x 15" x 12"

NEW 2" Gas Water Pump EPA / CARB Approved! New 5.5 HP Commercial Water Pump Part No. CSWP20CX 4 STROKE OHV SINGLE CYLINDER AIR COOLED FUEL TYPE UNLEADED 86 OCTANE OR HIGHER SUCTION/DISCHARGE PORT DIAMETER 50MM (2 INCHES) MAX SUCTION HEAD 8M (26.2 FT) TOTAL HEAD 28M (90.3 FT) 52.8 LBS. DIMENSIONS 19.6 X 14.5 X 17.4 INCHES ENGINE TYPE GAS SINGLE CYLINDER 4 STROKE ENGINE SPEED 3600 RPM ENGINE DISPLACEMENT 163CC CONTINUOUS OUTPUT 5.5 HP MAXIMUM OUTPUT 5.5 HP FEATURES EFFICIENT AIR CLEANER SYSTEM LOW NOISE SMALL IN SIZE

Engine Driven Pump, 7 Hp, Engine Brand United Power, Engine/motor Type Gas, Tank Capacity 3.27 Qt., 8700 Gph, 2 In, Npt, Material Of Construction Aluminum, Semi-open, Cast-iron Impeller, 3/4 In Solids Handling, Max. Pressure 37 Psi, 3600 Rpm, Max. Head 85 Ft., Max. Suction Lift 17 Ft., Temp. Range 40 To 140f, Self-priming, Agency Compliance Epa, Includes Spark Plug Wrench, Suction Strainer, 2 Threaded Hose Barb Connectors With Hose Clamps And Gasketsl

Get this Gentron Pro2 Series 2 inches Gas-Powered Water Pump GP2000 that features an easy pull start-up and low oil shut off system. It has a heavy duty steel frame with corrosion protected shell for easy maintenance. This pump can run about 2 to 3 hours on a full tank and requires 5.5 horsepower. This unit includes a water pump, intake hose end strainer, threaded hose ends and connectors, and clamps. Meets both C.A.R.B. & E.P.A. standards for cleaner emissions.

Submersible "top discharge" slim - line dewatering pumps are designed for small diameter well casings and other hard to reach applications where other pumps are to large to fit the application space. Pumps are designed with heavy duty hard anodized aluminum and stainless steel hardware for long life and lighter weight. Pumps offer double mechanical seals, upper seal lubricator and class "H" motor insulation. Abraisive resistant stainless steel impellers ( 2 HP to 50 HP ) resist wear from sand , gravel and other abrasive materials. The built in strainer protects large particles from entering the pump. Pumps ( except model PF01311SCV) are supplied with a powder coated steel control enclosure which contains a circuit breaker which protects against short circuit, overload and locked rotor... Less

2" x 2" ports 3.5 HP "S " series self priming centrifugal transfer pump with EPDM rubber parts Stainless steel internal hardware 25' max suction lift Close coupled to a 3.5 HP Briggs & Stratton gas engine flows to 145 at 10' head max head 100'

Engine Driven Pump, 2 Cycle, 9/10 Hp, Engine Brand Koshin, Engine/motor Type Gas, Tank Capacity 0.64 Qt., 1740 Gph, 1 In, Npt, Material Of Construction Aluminum, Semi-open, Aluminum Impeller, 1/8 In Solids Handling, Max. Pressure 50 Psi, 7000 Rpm, Max. Head 105 Ft., Max. Suction Lift 26 Ft., Temp. Range 41 To 113f, Self-priming, Agency Compliance Epa/carb, Includes 3/4 In Garden Hose Adapter

Semi-Trash Water Pump is a Quiet (64 dB), compact and lightweight pump. It is self-priming. Long life seal resists corrosion, wear and heat. Cast iron impeller and volute last longer for semi-trash applications. Self-Priming Water pump 6.5 HP Gas Engine with US. EPA certification Inlet and outlet inside Dimension: 2 " Total Head Lift" 92ft Suction head lift: 26ft Max Flow: 220 GPM

147 GPM 5.5 HP ENGINE-DRIVEN WATER PUMP Brand new, HYPRO 1542A-SP Self-priming aluminum centrifugal pump to provide high-capacity liquid transfer for many applications. Use for transferring water also for lawn and garden watering, tank filling and flood water removal when used with a strainer and foot valve. Aluminum impeller can handle solid particles in suspension up to 3/8" diameter. EPDM mechanical seal and inlet valve. Hose barb and strainer for inlet hose supplied (does not include the hose). Steel roll cage. 5.5 Hp PowerPro OHV gas engine Pump performance: 147 GPM @ 12' head (5 PSI) 110 GPM @ 58' head (25 PSI) 57 GPM @ 93' head (40 PSI) Max head 113' (49 PSI) Max. suction lift 23' Self-priming 2" BSP (British Standard Pipe) ports Overall size 16" x 15" x 15" Shpg. 60 lbs.

Engine Driven Pump, 3.8 Hp, Engine Brand Koshin, Engine/motor Type Gas, Tank Capacity 2.85 Qt., 5340 Gph, 1-1/2 In, Npt, Material Of Construction Aluminum, Semi-open, Cast-iron Impeller, 1/8 In Solids Handling, Max. Pressure 51 Psi, 3600 Rpm, Max. Head 118 Ft., Max. Suction Lift 26 Ft., Temp. Range 41 To 113f, Self-priming, Agency Compliance Epa/carb, Includes Manual

High Performance Hayward Super Pump Series Specs: Voltage = 230 Pipe Size = 2" Hayward Super Pump Application: In-ground pools of all types and sizes 100 In-ground spas Hayward Super Pump Features: Self-priming (suction lift up to 8' above water level) Exclusive swing-aside hand knobs make strainer cover removal easy Lexan see-thru strainer cover lets you see when basket needs cleaning Super-size 110 cubic inch basket has extra leaf-holding capacity. Load-extender ribbing ensures free flowing operation All components molded of corrosion-proof PermaGlass XL for extra durability and long life Heavy-duty, high performance motor for quieter, cooler operation Service-ease design gives simple access to all internal parts Dual Speed Benefits: The high speed and a low speed work together to... Less

New 2" Full Trash Water Pump 6.5 - 6 1/2 H.P. Gas Engine New Baron Tools 6.5 HP Gasoline Engine Water /Full Trash Pump Great pump for wet job sites, flooded basements, pool drainage and emergency use. Includes trash strainer and clamps for attaching hoses. Meets EPA standards. Automatic engine stall when low oil sensor is triggered to prevent engine damage. Pump weight 75 lbs. This is a Lifan engine. Manufactured by Lifan. Pump Specs:- Cast iron impeller - Suction height 24 ft.- Pump lift 78 ft

Engine Driven Centrifugal Pump, 3.5 Hp, Engine Brand Briggs & Stratton, Engine/motor Type Gas, Tank Capacity (qt.) 3, Npt Port (in.) 2, Material Of Construction Cast Iron, Impeller Cast Iron, Impeller Type Open, Max. Pressure (psi) 40, Engine Rpm 3600, Max. Head (ft.) 100, Max. Suction Lift (ft.) 15, Roll Bar Frame None, Temp. Range (f) 32 To 150, Self-priming Yes, Agency Compliance Epa

Submersible "top discharge" slim - line dewatering pumps are designed for small diameter well casings and other hard to reach applications where other pumps are to large to fit the application space. Pumps are designed with heavy duty hard anodized aluminum and stainless steel hardware for long life and lighter weight. Pumps offer double mechanical seals, upper seal lubricator and class "H" motor insulation. Abraisive resistant stainless steel impellers ( 2 HP to 50 HP ) resist wear from sand , gravel and other abrasive materials. The built in strainer protects large particles from entering the pump. Pumps ( except model PF01311SCV) are supplied with a powder coated steel control enclosure which contains a circuit breaker which protects against short circuit, overload and locked rotor... Less

New 2" Water/Trash Pump 6.5 - 6 1/2 H.P. Gas Engine New Baron Tools 6.5 HP Gasoline Engine Water / Semi Trash Pump Great pump for wet job sites, flooded basements, pool drainage and emergency use. Includes 4" trash strainer and clamps for attaching hoses. Meets EPA standards. Automatic engine stall when low oil sensor is triggered to prevent engine damage. This is a Lifan engine. Manufactured by Lifan. Pump Specs: - Cast iron impeller - Suction height 18 ft. - Pump lift 90 ft. - 140 GPM - 39 PSI - Self Priming - Threads are NPT Engine Specs: - 6.5 HP - Electronic Ignition - ON / OFF switch - 1 Gallon fuel tank - Continuous operation per tank 2 hours - Low oil sensor - Lifan 4 stroke engine

2" x 2" ports 3.5 HP "S " series self priming centrifugal transfer pump with EPDM rubber parts Stainless steel internal hardware 25' max suction lift Close coupled to a 3.5 HP Briggs & Stratton gas engine flows to 145 at 10' head max head 100'

Engine Driven Centrifugal Pump, 5-1/2 Hp, Engine Brand B&s, Fuel Type Gas, Tank Capacity 2.9 Qt., Port 2 In Npt, Material Of Construction Cast Iron, Closed Cast Iron Impeller, Solids Handling 1/4 In., Max. Pressure 69 Psi, 3600 Rpm, Max. Head 160 Ft., Max. Suction Lift 25 Ft., Number Of Impellers 1, Temp. Range 40 To 180f, Ignition Type Recoil, Agency Compliance Epa, Pump Is Carb Exempt

L F168 Semi-Trash Water Pump is a Quiet (64 dB), compact and lightweight pump. It is self-priming. Long life seal resists corrosion, wear and heat. Cast iron impeller and volute last longer for semi-trash applications. Self-Priming Water pump LF 5.5 HP Gas Engine with US. EPA certification Inlet and outlet insid

Engine Driven Centrifugal Pump, 3-1/2 Hp, Engine Brand B&s, Fuel Type Gas, Tank Capacity 2.9 Qt., Port 2 In Npt, Self-priming, Material Of Construction Cast Iron, Semi-open Cast Iron Impeller, Solids Handling 1/2 In., Max. Pressure 65 Psi, 3600 Rpm, Max. Head 150 Ft., Max. Suction Lift 25 Ft., Roll Bar Frame Steel, Number Of Impellers 1, Temp. Range 40 To 105f, Ignition Type Recoil, Agency Compliance Epa, Pump Is Carb Exempt