1993 honda accord rims

Hitachi W0133-1624719: Honda Accord SE Sedan 1993, Igniter (W0133-1624719) by Hitachi. Note: Eng: -3011902, California model. The original igniter that was installed at the factory is no longer available. When installing one of the replacement igniters, either heat sink 0121-PT2-006 (Accord & Prelude models) or 0121-PM5-A02 (Civic and Integra models) may also be required for proper installation but is not included with the igniter. Order the appropriate heat sink separately as needed. If installing a Hitachi igniter, note that 5mm longer retaining screws may also be required (not included). Is your vehicle hard to start Does it miss under load and idle rough Is your gas mileage not what it used to be Your ignition system may need repair, but before you waste your time and gas running out... Less

DC SPORTS CERAMIC HEADERSDC Sports Ceramic headers are mild steel with a proprietary temperature and corrosion- resistant ceramic coating. Once our mild-steel systems are completed in manufacturing, they are subjected to a thermal degrease and a preliminary sandblast to prepare the headers surface for coating adhesion. Every ceramic-coated system is hand-painted to ensure an even application of coating. After verifying the proper thickness of the coating, the header is cured for proper bonding of the ceramic coating and then fine-blasted for a high-luster finish.Dyno tuned and tested against the competition for maximum performance50 state legal or pending legalityAvailable in mild steel with ceramic coatingCNC mandrel bends with robotically- welded fittings deliver perfect fitEqual... Less

Hitachi W0133-1624719: Honda Accord SE Sedan 1993, Igniter (W0133-1624719) by Hitachi. Note: Eng: -3321571, Non-California model. The original igniter that was installed at the factory is no longer available. When installing one of the replacement igniters, either heat sink 0121-PT2-006 (Accord & Prelude models) or 0121-PM5-A02 (Civic and Integra models) may also be required for proper installation but is not included with the igniter. Order the appropriate heat sink separately as needed. If installing a Hitachi igniter, note that 5mm longer retaining screws may also be required (not included). Is your vehicle hard to start Does it miss under load and idle rough Is your gas mileage not what it used to be Your ignition system may need repair, but before you waste your time and gas running... Less

Tail LightsSwapping out your factory tail lights with a set of new aftermarket tail lights is an easy and fun way to add some spice to your vehicle. There are a surprising number of options to choose from when it comes to accenting your cars tail lights. Carbon fiber tail lights are common amongst the import tuners as they add a sporty, cool touch to the back end of the vehicle. They are lightweight and offer greater illumination. To really add some flair to your back end, try euro tails like altezzas. They normally feature a clear or smoked lens and one or two big tail lights housed within to make your car stand out. They are a nice touch and your competition will have something to look at when you blaze past them.Smoked tail lights are guaranteed to be both efficient and stylish. When... Less

New Honda Accord Seat Cover. Brand: Covercraft. Fits Years: 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, 00, 01, 02, 03, 04, 05, 06. PartsGeek offers high quality new, OEM and aftermarket products. KP00020TN

Hitachi W0133-1624719: Honda Accord Sedan F22A1 1993, Igniter (W0133-1624719) by Hitachi. Note: Eng: -4311975, Non-California model made in Japan. The original igniter that was installed at the factory is no longer available. When installing one of the replacement igniters, either heat sink 0121-PT2-006 (Accord & Prelude models) or 0121-PM5-A02 (Civic and Integra models) may also be required for proper installation but is not included with the igniter. Order the appropriate heat sink separately as needed. If installing a Hitachi igniter, note that 5mm longer retaining screws may also be required (not included). Is your vehicle hard to start Does it miss under load and idle rough Is your gas mileage not what it used to be Your ignition system may need repair, but before you waste your... Less

ExhaustThe exhaust system on a car is an integral part of the way it runs. Any complication could lead to problems. Likewise, an aftermarket exhaust system upgrade can truly boost a vehicles performance. The exhaust includes the muffler which moves the fumes of burnt gas out of your car. Installing a larger muffler makes it possible for more exhaust fumes to exit out of the vehicle. Before those gas-fumes exit out the muffler, they have to go through your vehicles catalytic converter.In 1975, due to the government pressuring auto manufacturers to lessen harmful gas emissions, exhaust systems now include a catalytic converter. Exhaust system catalytic converters reduce the toxins in the emission left by the burning of gasoline. They house a chemical which reacts with the fumes taking out... Less

Hitachi W0133-1624719: Honda Accord Coupe / Wagon 1993, Igniter (W0133-1624719) by Hitachi. Note: The original igniter that was installed at the factory is no longer available. When installing one of the replacement igniters, either heat sink 0121-PT2-006 (Accord & Prelude models) or 0121-PM5-A02 (Civic and Integra models) may also be required for proper installation but is not included with the igniter. Order the appropriate heat sink separately as needed. If installing a Hitachi igniter, note that 5mm longer retaining screws may also be required (not included). Is your vehicle hard to start Does it miss under load and idle rough Is your gas mileage not what it used to be Your ignition system may need repair, but before you waste your time and gas running out to the auto parts chain... Less

Nissin W0133-1792219: Honda Accord Sedan Standard Transmission 1993, Premium Brake Pad Set (W0133-1792219) by Nissin. - With Shims. Position: Front. Note: For models made in Japan (Nissin front calipers). Nissin caliper has 4 raised ridges on its outer surface area pad length = 144mm (5 11/16). Nissin caliper lower mounting bolt head requires a 14mm wrench. Are your brakes making noise Is your vehicles stopping power not what it used to be Brake repairs are not something that can be put off, but before you waste your time and gas running out to the auto parts chain store, check out our great selection of replacement brake parts. With just a phone call or a few clicks of the mouse you can have OE quality brake parts, at great prices, delivered to your door in just 1-2 days.