This is a new 67 GTO grab bar lucite, the same factory style that GM put on the car when it was going down the assembly line. It is a must when doing a restoration or a clone. HELP KEEP OUR PRICES LOW!GIVE 5 STAR FEEDBACK! See our feedback for great reviews! Product Listing Accuracy: While we strive for 100 percent accuracy in each and every listing, as a high volume seller, many times dealing with thousands of one-off products, errors can and will happen, and we may also run out of stock unint

Pontiac Seat Belt 67 Pontiac GTO Seat Belt Seats, Seat Covers & Accessories - New - Front, Driver and Passenger SideSeat Belt, 3-point. UNIVERSAL 3-POINT RETRACTABLE SEAT BELT, BLACK, SET OF 2 Be protected against car accidents with this retractable, wall-mount type seat belt! It is 1-3/4 wide and 131 when fully extended and can be installed with 10mm mounting bolt. Specifications: 1-3/4 in. width x 131 in. full extended length 3.5 x 3.5 x 2.7 in. retractable spool box size 13in. center push buckles are included With 10mm mounting bolt Without air bag sensor Wall mount type Notes: It may require modification or other adjustments to your vehicle. Replacement brand parts are the most affordable solution for your replacement needs! Replacement specializes in body parts and lighting products;... Less

This is a new set of 67 GTO emblems, the same factory style emblems that GM put on the car when it was going down the assembly line. What you get is 1 GTO grille emblem, 2 6.5 fender emblems, 2 GTO quarter emblems and 1 GTO trunk lid emblem.

SPECS CAM KIT PICTURE IS GENERIC.....YOU GET CORRECT CAM and LIFTERS DESCRIBED BELOW O.E. spec camshaft kit for Pontiac V-8 1955-1980 350 400 287 316 347 370 326 389 421 428 455 hydraulic NON-roller cam engines. P/N E187S and (16)HL1951S. Cam specs are as follows: Valve Lift (INT/EXH): .373/.373 ADV Duration (INT/EXH): 281/278 Duration @ .050" (INT/EXH): 188/188 Centerline (degrees): 111/111 Power Range (RPM): 1000-3500 We reserve the right to send an Elgin torque cam with similar profile if out of Melling. This is a cam for a flat tappet engine. This is a stock replacement camshaft with good idle, good low end torque, and good pulling power. (50-State Legal) May not be computer compatible. Image is for illustrative purposes only.

We have now reproduced the factory cable that was used on 1967 GTO with 4BBL only. Unlike what was on the market before this cable is the proper length. This cable has 3 adjustment holes for optimum adjustment. Fits manual and automatic transmission cars. HELP KEEP OUR PRICES LOW!GIVE 5 STAR FEEDBACK! See our feedback for great reviews! Product Listing Accuracy: While we strive for 100 percent accuracy in each and every listing, as a high volume seller, many times dealing with thousands of one-

1964 1965 1966 1967 GTO - Skylark - Cutlass Trunk Floor Kit Description Brand New Reproduction Trunk Floor Kit Kit includes: Center section LH RH Panels with body mount braces 2 Fuel Tank Braces This is made in Taiwan Black EDP Coated Fits: 1964 - 1967 Pontiac GTO - Tempest - LeMans models 1964 - 1967 Buick Skylark - GS models 1964 - 1967 Oldsmobile Cutlass - F85 - 442 models Free shipping within the Continental United States.Hawaii, Alaska, Puerto Rico International buyers contact us for shipp

This is the lower door molding for 1967 GTO models. Mounts on bottom of doors. These are new.

New factory 2 piece style brake rotor is used on GM cars with 67-68 four piston or 69-70 single piston caliper cars. If doing a concours restoration, this is a must. They fit 1967 1968 1969 Camaro / SS / Z28 / Firebird / Trans Am models; 1967 1968 1969 1970 Chevelle / SS / LS6 / LS5 / GTO / Cutlass / 442 / W30 / W31 / Nova / Skylark / GS / El Camino and also 1970 Monte Carlo models. HELP KEEP OUR PRICES LOW!GIVE 5 STAR FEEDBACK! See our feedback for great reviews! Product Listing Accuracy: Whil

This is a new reproduction fender. Fits all 67 1967 GTO / LeMans & Tempest hardtop and convertible models. New part now available by The Parts Place - the leader in NEW GTO / LeMans restoration parts!

1966 1967 GTO - Tempest - LeMans Radiator Core Support Description New Reproduction Radiator Core Support This will only work with a 15 1/2" radiators The core dimension is measured between the top and the bottom tanks Black EDP Coated Fits: 1966 - 1967 Pontiac GTO - Tempest - LeMans models Free shipping within the Continental United States.Hawaii, Alaska, Puerto Rico International buyers contact us for shipping costs. 1508