1911 Hammer Sear Sports and Outdoors - Shopping.com

Category

Sport and Outdoor
Showing results for "1911 hammer sear"
Results 1 - 40 of 1500+

Wilson Combat 1911 Value Line...

$28.99
Brownells Wilson Combat 1911 Value Line Hammer & Sear - Value Hammer
+ $3.95 shipping
/wilson-combat-1911-value/WMeD0OWujtPM-EMRyPla7w==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Ready to install, fully finished parts give a crisp, clean trigger pull. All engagement surfaces are correctly ground for positive hammer/sear engagement. Hammer has low-mass oval cut spur that reduces lock time. Narrowed sides improve function by reducing drag. Sear primary angle is cut; just polish it and stone the relief angle for a super clean breaking trigger. Mfg: Wilson Combat SPECS: MIM cast 4340 steel, Hardened to Rc 47-52. Matte black finish.
More

Power Custom Hammer and Sear...

$29.99
MidwayUSA Power Custom Hammer and Sear Fitting Block 1911
+ $4.99 shipping
/power-custom-hammer-and/9aHycJDmjs01BAYhqUdHuA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Allows for exact examination of the sear and hammer engagement surfaces. Each base also includes a hole for easy disassembly. Technical InformationMateri al: Steel Features: Allows for exact examination of hammer and sear engagement surfaces. Includes hole for disassembly Searches for products like these typically include: Gunsmithing Supplies, Gunsmithing Tools,Tools for 1911
More

Brownells 1911 Sear Stoning...

$34.99
Brownells Brownells 1911 Sear Stoning Fixture - Sear Fixture
+ $3.95 shipping
/brownells-1911-sear/yJCbBukpsvwPcU0c8IYM8w==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Easy-to-use, hand-held tool retains the sear and positions it so you can stone the contact surfaces at the correct angles to produce a smooth, clean-breaking trigger free from unwanted creep. Helps you produce precise, mirror-finish surfaces for complete, full-width contact with the hammer to ensure reliable ignition while preserving proper operation of the thumb safety. Raising or lowering the fixture's setscrew lets you change sear angle. Fixture body is machined from solid carbon steel for years of service without loss of alignment. Includes a hardened, stainless steel .020 thick shim that prevents you from removing too much material from the sear, and protects the fixture body from wear Mfg: Brownells SPECS: Steel, black oxide finish. 3 (8.3cm) long, (1.9cm) wide. Includes .020 thick... Less
More

Egw 1911 Competition Sear -...

$29.99
Brownells Egw 1911 Competition Sear - Egw 1911 Auto Sear
+ $3.95 shipping
/egw-1911-competition-sear/bJEfi5lf8VlWnMjJYn6xtg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Ultra-hard sear gives a clean-breaking, light-feeling trigger pull with little or no time-consuming stoningXXcan be installed straight out of the package in many cases. Precision CNC-machined from tool steel barstock, then ground for precise geometry to ensure correct sear angle for full hammer/sear engagement. Hardened to Rc 55 for exceptionally long life, so your trigger job lasts longer. Mfg: Egw SPECS: Machined tool steel, in-the-white. Fits 1911 Auto only.
More

Brownells 1911 Hammer...

$39.99
Brownells Brownells 1911 Hammer Squaring File - 1911 Hammer Squaring File W/Handle
+ $3.95 shipping
/brownells-1911-hammer/xWv8rHf1lt_U2xpPniOyYA==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Our specially designed, two-sided, square file greatly simplifies trigger jobs by establishing the required, precise, 90, hammer hook angle. Saves those easily-worn stones for setting hook heights and putting on the final polish. Safe on two sides, cannot damage hammer, and safe to use with the various hammer/trigger sear jigs. Keeps its sharp corners and dead flat edges, even after extended use. Available with or without plastic handle (handle color may vary). Mfg: Brownells SPECS: 5 (12.7cm) lg. Tapers, .185 (4.8mm) - .180 (4.6mm).
More

Wilson Combat 1911 Ultralight...

$54.99
Brownells Wilson Combat 1911 Ultralight Hammer - S/S Ultralight Hammer
Free Shipping
/wilson-combat-1911/z65ZHV6IGPdNA7ErQVNo5w==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Free Shipping
The last bit of extra weight has been stripped away for minimum weight and faster locktime. Machined from A-2 tool steel or Stainless Steel and hardened for superior strength and long life. Sear engagement hooks pre-cut to .020 height and ground; ready to polish. Rebated width on half-cock prevents sear nose damage. Combat-style spur is serrated for fast, easy thumb grip. Narrowed body can't interfere with slide travel. Mfg: Wilson Combat SPECS: Stainless steel (S/S) or A-2 steel, heat treated to Rc 48-52. Fits Series 70 and 80. Minor fitting required.
More

Wilson Combat 1911 Ultralight...

$49.99
Brownells Wilson Combat 1911 Ultralight Hammer - Ultralight Hammer
+ $3.95 shipping
/wilson-combat-1911/a_6oXeuRnJhPf_iG7r4PEA==/info
Brownells
IN_STOCK ( In stock )
Store not rated
The last bit of extra weight has been stripped away for minimum weight and faster locktime. Machined from A-2 tool steel or Stainless Steel and hardened for superior strength and long life. Sear engagement hooks pre-cut to .020 height and ground; ready to polish. Rebated width on half-cock prevents sear nose damage. Combat-style spur is serrated for fast, easy thumb grip. Narrowed body can't interfere with slide travel. Mfg: Wilson Combat SPECS: Stainless steel (S/S) or A-2 steel, heat treated to Rc 48-52. Fits Series 70 and 80. Minor fitting required.
More

Doug Koenig Shooting Sports...

$82.00
Brownells Doug Koenig Shooting Sports 1911 Low Mass Hammer - Premium Hammer
Free Shipping
/doug-koenig-shooting/TmyCCuV1jaoArhhYSkdMCw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Free Shipping
All-steel, Commander-style Premium Match and Standard concealed-carry hammers that are ready for installation with little or no fitting required. Computer-aided design removes all excess weight for fast, consistent, positive ignition without cracking or breakage. Engagement areas are surface ground to ensure proper relationship between the hooks and the pins plus, the half-cock notch will not damage your carefully prepared sear angles. Sides narrowed for slide clearance. Premium Match - model has additional lightening cuts for lower mass giving the faster lock times needed for competitive shooting. Mfg: Doug Koenig Shooting Sports SPECS: Tool steel, in-the-white, machined. Premium Match - .3 oz. (9g) wt. Standard - .5 oz. (14g) wt.
More

Cylinder & Slide 1911 3-Piece...

$99.99
Brownells Cylinder & Slide 1911 3-Piece Drop-In Trigger Pull Set - Tactical Ii Trigger Pull Set
Free Shipping
/cylinder-slide-1911/crgV58KUFXSglcKOURHYMw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Free Shipping
Commander-style hammer, Tactical sear, and Ultra Match disconnector drop-in to deliver reliable ignition and improved trigger function on any 1911 auto. Each component is precision EDM cut to ±.0005 tolerances from Cylinder & Slide's Special Tool Steel. All parts are honed and polished, then heat-treated to Rc 50-53 for long service life. Tactical II Set features the popular Tactical II chamfered hammer in-the-white with standard .018 long hammer hooks for a match-grade trigger pull. Available in Tool Steel or high-grade Stainless Steel alloy. MARSOC Set includes a blued Tactical II-style hammer with longer .023 hammer hooks for added sear engagement and Mfg: Cylinder & Slide SPECS: Special billet tool steel alloy (TS), hardened to Rc 50-53, or stainless steel (SS), hardened to Rc 50-55,... Less
More

Cylinder & Slide 1911 Light...

$8.99
Brownells Cylinder & Slide 1911 Light Pull Sear Spring
+ $3.95 shipping
/cylinder-slide-1911/kAXxLx8UsTQANYnhhE3LwA==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Reduces the trigger pull approximately 1.5lb while maintaining a safe spring pressure hammer begins to follow after installation of this spring, the hammer/sear engagement is incorrect and should be repaired. This is the same spring that we furnish in the trigger pull kits. Mfg: Cylinder & Slide SPECS: For the 1911 models.
More

Ed Brown Sear Fixture 1911

$49.99
MidwayUSA Ed Brown Sear Fixture 1911
+ $4.99 shipping
/ed-brown-sear-fixture-1911/cDMTTMlb-at7yHvn4kKAag==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This easy to use jig allows you to cut the proper angle on the sear so you get the right engagement to the hammer. Includes instructions that cover every detail of the 1911 trigger job. Stainless steel. Technical InformationMateri al: Stainless Steel Notes: Includes .020 Shim Comes With Complete Instructions Searches for products like these typically include: Gunsmithing Supplies, Gunsmithing Tools, Gunsmithing Fixtures
More

Clark Custom 1911 Custom Sear...

$18.99
Brownells Clark Custom 1911 Custom Sear Spring - Custom Sear Spring, 3-Pak
+ $3.95 shipping
/clark-custom-1911-custom/8V6J93eBO6dad51HyAzjKA==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Exclusive, split center leg of spring keeps constant forward pressure on trigger to prevent ham-mer/sear notch damage (which can cause dangerous hammer follow) on guns equipped with lightened or traditional, custom trigger jobs. Allows hammer to stand cocked under most normal conditions and will not affect trigger break or pull. Can be used with lightweight triggers or Gold Cup-style hammers. Mfg: Clark Custom SPECS: Blued steel, 2-13/16 (7.1cm) long, (12.7mm) wide. Fits all models of Colt style 1911 Auto pistols.
More

Cylinder & Slide 1911 Trigger...

$99.99
Brownells Cylinder & Slide 1911 Trigger Pull Kits - Tactical Match Kit
Free Shipping
/cylinder-slide-1911/v9R70BooOSZvRCj1OBsACw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Free Shipping
Each kit is tested on a Series 70-style frame to make certain it will produce the specified pull weight with little or no fitting. Parts are wire EDM cut from bar stock, honed and polished, then heat treated for years of service life. All profiles and through-holes are mechanically correct to function without hand fitting. Sear nose has correct relief angle, sear spring is narrowed to reduce pull weight. Exposed hammer edges on Ultra-Light, Super?Match and Tactical II are chamfered to minimize slide drag and clothing wear. Each kit contains a hammer, sear, disconnector, sear spring and hammer spring. ULTRA LIGHT KIT - 3.5 lb. pull weight. Ultra light, skeletonized, hammer; relieved to preven Mfg: Cylinder & Slide SPECS: Ultra Light Kit: Special die steel, in-the-white. Hammer: Rc 50-53... Less
More

Ed Brown 1911 Trigger Pull...

$99.99
Brownells Ed Brown 1911 Trigger Pull Set - 1911 Trigger Pull Set Blued
Free Shipping
/ed-brown-1911-trigger/2a4oWw2rXITCE42Yz_WN1A==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Free Shipping
These Trigger Pull Kits include the Ed Brown parts needed for superior trigger function. The machined-from-bars tock hammer features a long list of custom modifications for a match-quality trigger pull without a lot of work. Sear hooks are cut to height, then precision surface ground so just a light stoning is all that's necessary to achieve a crisp, clean-breaking trigger pull. Half-cock notch is narrowed to help prevent sear damage and pin holes are CNC-machined for location; lowered strut pin hole reduces full-cock spring pressure. Narrowed spur minimizes slide drag; larger-than-factor y, Commander-style opening reduces weight for a fast fall and even faster locktimes. Fully-chamfere Mfg: Ed Brown SPECS: Hammer: 4140 alloy steel, blue, or 420 stainless steel, SS. Rc 52-54, .020-.022... Less
More

Brownells 1911 Pin Kit - 1911...

$59.99
Brownells Brownells 1911 Pin Kit - 1911 Auto Pin Kit
Free Shipping
/brownells-1911-pin-kit/Vkn1m9Hi0wcd0yZ6qo712w==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Free Shipping
We've put together a bulk-packed selection of eleven American-made, high-quality pins and other, often-replaced small parts, conveniently packaged in a see-through, hinge-top, plastic, bench box. Mfg: Brownells SPECS: Steel, blued. Kit contains six each of the following parts: Mainspring Housing Pin, Hammer Pin, Hammer Strut Pin, Safety Lock Plunger, Mainspring Cap, Mainspring Cap Pin, Slide Stop Plunger, Link Pin, Ejector Pin, Sear Pin & Mainspring Housing Pin Retainer.
More

Ed Brown 1911 Sear Jig -...

$49.95
Brownells Ed Brown 1911 Sear Jig - Brown Sear Jig
+ $3.95 shipping
/ed-brown-1911-sear-jig/BGVSIB9Y4xPWz2jyFgumOw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Contoured design fits comfortably in the palm of your hand, holds sear at the correct angle for precise stoning. Adjustable positioning screw lets you make exact sear angle changes to increase or decrease trigger pull weight. Use with 6xx stones to achieve a mirror smooth finish for a clean, crisp letoff. Includes complete instructions and .020 shim. Mfg: Ed Brown SPECS: Stainless steel. 1 (2.5cm) wide, 4-7/16 (11.1cm) long.
More

Cylinder & Slide 1911...

$16.99
Brownells Cylinder & Slide 1911 Tactical Match Hammer Strut - Tactical Match Hammer Strut
+ $3.95 shipping
/cylinder-slide-1911/lEd1HFZGdiwObZIxNpTo6g==/info
Brownells
IN_STOCK ( In stock )
Store not rated
C&S's Tactical Match strut is made longer than the original factory strut to provide more mainspring compression for a stronger hammer strike, faster lock time, and more reliable ignition. It is shaped to prevent it from rubbing against the sear spring, which could have an adverse effect the trigger pull and lock time. Precisely machined from high-grade steel for strength and polished for a super-smooth finish. Some gunsmith fitting may be required. Mfg: Cylinder & Slide SPECS: Carbon steel, natural silver finish. May require fitting
More

Wolff 1911 Sear Spring - 1911...

$29.49
Brownells Wolff 1911 Sear Spring - 1911 Sear Spring, 5 Pak
+ $3.95 shipping
/wolff-1911-sear-spring/xSSh-p-EreIV8TEsvts0Qw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Wolff's renowned quality standards ensure uniform thickness throughout the entire spring for consistent tension on both the sear and disconnector. Correctly tempered so it won't take a set when left cocked and locked. Mfg: Wolff SPECS: Blued steel, tempered. Sold singly or in 5, 10 and 25 paks. Fits all 1911 Autos.
More

Sti 1911 Match Grade Sear -...

$28.99
Brownells Sti 1911 Match Grade Sear - Premium Grade Sear
+ $3.95 shipping
/sti-1911-match-grade-sear/YFQBmLG_Ic1O5E_MXvgDJw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Electro- discharge machined to give the precision sear geometry needed for improved trigger pull. Features ground and polished angles for less work and faster installation on match-grade trigger jobs. Made from S-7, shock-grade, tool steel, then specially hardened for longer service life on competition pistols firing many thousands of rounds per year. Mfg: Sti SPECS: Steel, S-7, in-the-white.
More

Ed Brown 1911 Perfection Sear...

$32.99
Brownells Ed Brown 1911 Perfection Sear - Perfection Sear
+ $3.95 shipping
/ed-brown-1911-perfection/tYUn6QHAm7Zzv6HOofN4AA==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Perfection Sear is pre-fit to provide the least amount of hand work prior to installation. Primary angle is already cut; simply stone the correct relief angle and install. Mfg: Ed Brown SPECS: 4340 tool steel, blued. Hardened to Rc 50.
More

Power Custom 1911 Hammer,...

$15.99
Brownells Power Custom 1911 Hammer, Sear & Grip Safety Shims - 1911 Sear Shims, 10-Pak
+ $3.95 shipping
/power-custom-1911-hammer/GCGe0w9ROQ2sUJnP9nLQ-A==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Insert these precision- manufactured shims between the frame and the fire control parts on your 1911 Auto for a smoother, more consistent- feeling trigger pull without replacing components. Removes unwanted side-to-side movement and provides a quick fix for out-of-tolerance hammers, sears, grip safeties, and frames. Machined from stainless steel, fully hardened and tempered for long wear. Sold in 10 paks. Mfg: Power Custom SPECS: Machined stainless steel, silver finish. .002 (.0051mm) thick. Fits Colt 1911 Auto and clones.
More

Power Custom 1911 Hammer,...

$15.99
Brownells Power Custom 1911 Hammer, Sear & Grip Safety Shims - 1911 Hammer/Grip Safety Shims, 10-Pak
+ $3.95 shipping
/power-custom-1911-hammer/tU9D-_GA7PVCjvPb4LAczA==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Insert these precision- manufactured shims between the frame and the fire control parts on your 1911 Auto for a smoother, more consistent- feeling trigger pull without replacing components. Removes unwanted side-to-side movement and provides a quick fix for out-of-tolerance hammers, sears, grip safeties, and frames. Machined from stainless steel, fully hardened and tempered for long wear. Sold in 10 paks. Mfg: Power Custom SPECS: Machined stainless steel, silver finish. .002 (.0051mm) thick. Fits Colt 1911 Auto and clones.
More

Wilson Combat 1911 Bullet...

$7.99
Brownells Wilson Combat 1911 Bullet Proof Hammer Strut - 1911 Bullet Proof Hammer Strut, Stainless
+ $3.95 shipping
/wilson-combat-1911-bullet/uGrUvZSHckX1ATWBX45cWw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
The Bullet Proof Hammer Strut has been designed to be the proper length and shape for the ideal 1911 trigger job. EDM machined from hardened steel plate, this replacement part prevents interference with the sear spring and grip safety which could disrupt a fine trigger job. The strut is also slightly longer than a stock part with beveled bottom edges for a smoother feel during cycling. Mfg: Wilson Combat SPECS: 681B is EDM machined from hardened blued A-2 tool steel. 681S is EDM machined from hardened 17-4 PH stainless steel.
More

Wilson Combat 1911 Sear -...

$29.99
Brownells Wilson Combat 1911 Sear - Deluxe Sear
+ $3.95 shipping
/wilson-combat-1911-sear/YvzJsFIpsmXb9WyiwSyAAg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
EDM cut from tool steel bar stock, heat treated for maximum hardness then ground to a beautiful, high polish to achieve a smooth, crisp, clean trigger pull. Mfg: Wilson Combat SPECS: EDM cut from tool steel bar stock.
More

Brownells Bob Marvel 1911...

$159.99
Brownells Brownells Bob Marvel 1911 Auto Sear & Hammer Jig - Marvel Sear & Hammer Jig
Free Shipping
/brownells-bob-marvel-1911/VJtpF9AY4j7bEJmNeiLPlg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Free Shipping
Three-piece, dual purpose jig gives perfectly stoned surfaces with exact 90 cuts every time. Guides stone over all styles of 1911 hammers and sears for a clean-breaking, match-quality let-off. Combination jig/vise holds hammers at the correct height. Plus, locks sear in proper relationship to hammer to make sharp primary/secondary cuts on hammer engaging surfaces. Use 6 x x stone. Mfg: Brownells SPECS: Hardened, anodized aluminum. Approx. 4 (10.1cm) long, 2 (5cm) high, (19cm) thick. Includes instructions.
More

Brownells Firearm Specific...

$69.99
Brownells Brownells Firearm Specific Hammer/Sear Pin Block Kits - Colt 1911 Hammer/Sear Pin Block Kit
Free Shipping
/brownells-firearm/99eXNf6mijlTzBtY1zFu2A==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Free Shipping
Machined steel block allows you to mate the hammer and sear (or trigger) outside of the firearm for a clear, unobstructed view of the critical point of engagement. Accepts a wide selection of hammer and sear pins sized for various handguns and rifles. Dovetailed adjustment block rides in slotted channel so pin spacing can be precisely set to match individual frames and receivers. Allen screw locks the pin setting so hammer and sear can be dropped in place relative to their actual position in the firearm. Great for cutting the engagement surfaces on new parts or fine-tuning the factory ones. Pins are individually numbered for proper identification. Mfg: Brownells
More

Brownells Firearm Specific...

$69.99
Brownells Brownells Firearm Specific Hammer/Sear Pin Block Kits - Colt 1911 Hammer/Sear Pin Block Kit
Free Shipping
/brownells-firearm/McBJhr3b07BgCZ5_0ZNy8w==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Free Shipping
Machined steel block allows you to mate the hammer and sear (or trigger) outside of the firearm for a clear, unobstructed view of the critical point of engagement. Accepts a wide selection of hammer and sear pins sized for various handguns and rifles. Dovetailed adjustment block rides in slotted channel so pin spacing can be precisely set to match individual frames and receivers. Allen screw locks the pin setting so hammer and sear can be dropped in place relative to their actual position in the firearm. Great for cutting the engagement surfaces on new parts or fine-tuning the factory ones. Pins are individually numbered for proper identification. Mfg: Brownells
More

Brownells 1911 Trigger,...

$299.99
Brownells Brownells 1911 Trigger, Hammer & Sear Kit
Free Shipping
/brownells-1911-trigger/0gxxLbl5x1AJV3N7EascNA==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Free Shipping
A smooth, clean breaking trigger is one of the most important steps in fine tuning the 1911 Auto. We've brought together a complete selection of professional quality jigs, stones, files and more; plus, we've included clear, easy-to-understand instructions to help you produce that clean-as-glass trigger break and light, smooth-as-silk pull your customers want. This Kit will modify most triggers, hammers and sears made for the Colt 1911-A1, its many models and copies. Bench Block sold seperately. Get the individual items: Bob Marvel Sear & Hammer Jig Brownells Trigger Adjustment Pins Brownells Trigger Stirrup Die Swiss Pattern Pillar File .020 Mfg: Brownells
More

Power Custom Ruger 10/22...

$61.99
Brownells Power Custom Ruger 10/22 Hammer & Sear Package - Hammer Sear Package
Free Shipping
/power-custom-ruger-1022/xN4hZTnp7Qdg6KJME_v9LA==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Free Shipping
Complete, easy-to-install kit means little to no gunsmithing required for a custom, 2- pound trigger pull that breaks clean and crisp. Hammer and sear are EDM machined from long-wearing carbon steel, vapor honed then fully ground and prepped so you get a light, crisp-breaking trigger pull without the hard work. Provides faster lock time, shorter trigger travel and improved accuracy. Kit includes Ron's special springs, hammer and stainless steel sear shims that help eliminate excessive tolerances, plus a slave pin to make reassembly even easier. DOES NOT fit 10/22 Magnum rifles. Mfg: Power Custom SPECS: Kit includes hammer, sear, XP hammer spring, sear disconnector spring and trigger return spring, (2) trigger shims, (2) hammer shims, sear slave pin and complete instructions. DOES NOT fit... Less
More

Metro Arms Complete 1911...

$499.99
MidwayUSA Metro Arms Complete 1911 Government Parts Kit Hard Chrome
+ $7.59 shipping
/metro-arms-complete-1911/ywj4kvm40jLI9dMkHVaDyg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
FeaturesComplete 1911 Government parts kit (Less frame and magazine)Forged steel slide, precision made partsDurable pre-finished parts (Available in Hard Chrome or Blued) The Metro Arms 1911 Government Parts Kit is perfect for those looking to build a high quality 1911. The kit includes all the necessary parts to have a functional pistol, less a frame, grips, and magazine. Slides are forged steel, and all the parts are brand new and machined to precise specifications. Get all your hard-to-find replacement parts in one handy kit! Kit Includes: BarrelBarrel BushingBarrel LinkBarrel Link PinDisconnectorEj ectorEjector PinExtractorFirin g PinFiring Pin SpringFiring Pin StopFront Sight (Novak Cut)Rear Sight (Novak Cut)Grip SafetyThumb SafetyHammerHamme r PinHammer StrutHammer Strut PinMagazine... Less
More

Wilson Combat 1911 Pin Set -...

$15.99
Brownells Wilson Combat 1911 Pin Set - 1911 Pin Set, Blue
+ $3.95 shipping
/wilson-combat-1911-pin/VS-v7Wqg_RuwtjeyCTdowQ==/info
Brownells
IN_STOCK ( In stock )
Store not rated
High quality replacement pins for the 1911 Auto in a convenient, money-saving pak. Set of eleven pins. Oversized sear and hammer pins are hardened, then ground to maximum diameter on the 1911 Auto print to fit worn or out-of-spec frame pin holes. Mfg: Wilson Combat SPECS: Steel, heat-treated; available in blued or stainless. Pin Set contains one each; mainspring plunger, sear pin, ejector roll pin, mainspring housing pin, link pin, mainspring housing retainer, strut pin, mainspring plunger retainer, hammer pin, slide release plunger, thumb safety plung
More

Cold Steel 1911 Training...

$23.74
eBay Cold Steel 1911 Training Pistol Green Polypropylene Construction W/ Hammer Back
Free Shipping
/cold-steel-1911-training/RYzVGftSrlrs2unRE-un4A==/info
eBay
IN_STOCK ( In stock )
Free Shipping
listing Store Home About us Add to Favorite Newsletter Feedback Contact Cold Steel 1911 Training Pistol, Hammer Back, CS-92RGC11C The illustrated Cold Steel Trainer is the Cold Steel 1911 Training Pistol that features green polypropylene construction, 1 wide with the hammer back and the safety on. This Cold Steel Training Pistol is fashioned to look as realistic as possible so it can be effectively used in solo practice, training drills, disarm drills and demonstrations. The Cold Steel 1911 Training Pistol is 8 5/8 long, 5 3/4 tall and it weighs 12 ounces. Shipping Payments Return About us One of our main goals as a small family-owned business is to provide extremely fast shipping times. You can check this in the feedback left by our clients nation-wide. In fact, we ship all business days... Less
More

Brownells Yavapai 1911 Sear...

$159.99
Brownells Brownells Yavapai 1911 Sear Tool - Brownells/Yavapa i Sear Tool
Free Shipping
/brownells-yavapai-1911/mr6EDSJerkQE5wleiZ0AQQ==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Free Shipping
Developed by the gunsmithing program at Yavapai College to help their students learn the correct angle of hammer/sear engagement required for achieving a light, clean-breaking, match-quality trigger on the 1911 Auto. Precision- machined tool incorporates a roller-type, sear stoning fixture that allows incremental cutting of both primary and secondary sear angles plus, a 20 power magnifier for detailed, up-close examination and precise changes in individual hammer/sear engagement. Mfg: Brownells SPECS: Aluminum block, 3 (7.6cm) x 1.5 (3.8cm) x (19cm). Includes 20X magnifier, steel roller, hammer pin, sear pin and complete instructions.
More

Brownells Yavapai 1911 Sear...

$159.99
Brownells Brownells Yavapai 1911 Sear Tool - Brownells/Yavapa i Sear Tool
Free Shipping
/brownells-yavapai-1911/zNXBcr9ZkL_uAXnct3RM0A==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Free Shipping
Developed by the gunsmithing program at Yavapai College to help their students learn the correct angle of hammer/sear engagement required for achieving a light, clean-breaking, match-quality trigger on the 1911 Auto. Precision- machined tool incorporates a roller-type, sear stoning fixture that allows incremental cutting of both primary and secondary sear angles plus, a 20 power magnifier for detailed, up-close examination and precise changes in individual hammer/sear engagement. Mfg: Brownells SPECS: Aluminum block, 3 (7.6cm) x 1.5 (3.8cm) x (19cm). Includes 20X magnifier, steel roller, hammer pin, sear pin and complete instructions.
More

Ed Brown 1911 Perfection...

$21.99
Brownells Ed Brown 1911 Perfection Disconnector - Perfection Disconnector
+ $3.95 shipping
/ed-brown-1911-perfection/ENiYDSV7ZvgE0jeab32IOA==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Designed to work with Ed Brown's Perfection Sear and Hardcore Hammer for crisp, high performance trigger jobs. Heat treated for super durability in rugged service. All machined surfaces are finished and dimensionally precise to ensure perfect fit and smooth functioning. Gunsmith installation required. Mfg: Ed Brown SPECS: Steel, blued. Fits all 1911 pistols including hi-capacity models.
More

Wilson Combat 1911 Complete...

$15.99
Brownells Wilson Combat 1911 Complete Spring Kits - 1911 Full Size Complete Spring Kit
+ $3.95 shipping
/wilson-combat-1911/7gmd4kNda4wHVTjNTkzMCQ==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Wilson Combat 1911 Complete Spring Kits provide you with all the springs needed to give that old 1911 a new lease on life or to complete that build. These heat treated music wire springs are some of the finest quality coil springs on the market and will provide you with exceptional service. Full Size kit contains the following springs: 18 lb Recoil Spring Extra Power Firing Pin Spring 18lb Reduced Power Hammer Spring Mag Catch Spring Sear Spring Plunger Tube Spring Commander kit contains the following springs: 20lb Recoil Spring Extra Power Firing Pin Spring 18lb Reduced Power Spring &bull Mfg: Wilson Combat
More

Wilson Combat 1911 Complete...

$15.99
Brownells Wilson Combat 1911 Complete Spring Kits - 1911 Commander Complete Spring Kit
+ $3.95 shipping
/wilson-combat-1911/xEthV7dJp8yTgfqLw-D3rg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Wilson Combat 1911 Complete Spring Kits provide you with all the springs needed to give that old 1911 a new lease on life or to complete that build. These heat treated music wire springs are some of the finest quality coil springs on the market and will provide you with exceptional service. Full Size kit contains the following springs: 18 lb Recoil Spring Extra Power Firing Pin Spring 18lb Reduced Power Hammer Spring Mag Catch Spring Sear Spring Plunger Tube Spring Commander kit contains the following springs: 20lb Recoil Spring Extra Power Firing Pin Spring 18lb Reduced Power Spring &bull Mfg: Wilson Combat
More

Cylinder & Slide 1911 Super...

$49.99
Brownells Cylinder & Slide 1911 Super Lite Low Mass Sear
+ $3.95 shipping
/cylinder-slide-1911/G7mG4jwKFXQNLAtWLOmuCg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Manufactured from the same aero space steel alloy as the Premium Hammers. Extremely low mass due to innovative recontouring. Designed to be used for extremely light trigger pulls. Faster reset time due to low mass which reduces the chance of following with very light trigger pulls. Sear bearing surface micro honed to produce that 2 lb. pull easily. Heat treated to 50-55 Rockwell C for extreme durability. Mfg: Cylinder & Slide SPECS: For 1911 models.
More

Nighthawk Custom 1911 Pin...

$13.99
Brownells Nighthawk Custom 1911 Pin Sets - Govt. Model Pin Set
+ $3.95 shipping
/nighthawk-custom-1911-pin/CkrUM7ANuTIobP7m0gQYFw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
No need to reinstall dinged, worn, or scuffed up pins when you can put in a completely new, precision machined set of hardened, beautifully blued steel replacements. This pin set is really complete, with every pin for your 1911 pistol, including the mainspring cap and pin and the safety lock plunger/slide stop plunger assembly. Sets available for Govt. and Officers models. Mfg: Nighthawk Custom SPECS: Steel, blued, matte finish. Set includes barrel link pin, ejector pin, hammer pin, hammer strut pin, mainspring cap, mainspring cap pin, mainspring housing pin, mainspring housing pin retainer, plunger spring, safety lock plunger, slide stop plunger, and sear pin.
More

Nighthawk Custom 1911...

$1,274.99
Brownells Nighthawk Custom 1911 Government Match Grade Parts Kit - 1911 9mm Government Match Grade Parts Kit
Free Shipping
/nighthawk-custom-1911/NvKAJgZrmH-Upwxi2gpxfg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Free Shipping
Nighthawk's Match Grade 1911 Parts Kit contains everything you need to assemble a custom Government model pistol. Just add the full-size frame of your choice - with the features you want - and you are ready to build your own Dream Gun. Not just a small parts kit, the Nighthawk Match Grade 1911 Parts Kit is a grown-up variation of the model kits you built as a kid - only this one does require some gunsmithing skills. Except for the sights, ALL components in the Nighthawk Match Grade 1911 Parts Kit are machined from high-grade stainless steel, left in-the-white with a fine matte finish. The steel sights are blued to prevent glare from spoiling your sig Mfg: Nighthawk Custom
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2017 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-r.2017.sprint17-EP-4612-30501
http://img.shoppingshadow.com/jfe/JavaFrontEnd-r.2017.sprint17-EP-4612-30501