The 12W6v2 is a great choice for those seeking high output and audiophile sub-bass quality in compact enclosures. Exceptional linear excursion capability and highly optimized motor and suspension designs ensure linear performance at high power levels. Patented cooling technologies enhance reliability and linearity. Well suited for sealed or ported enclosure designs.

W6v2 H.o. Wedgebased On The Design Of The W7 High Output Systems, The W6v2 Inh.o.’sin Are Designed To Perform At Serious Output Levels While Retaining Exceptional Sound Quality. The W6v2’s Also Have The Benefit Of Smaller Enclosure Requirements Making These Some Of The Smallest Of All The H.o. (high-output) Enclosures Out There.each Is Properly Sized And Tuned To The Optimum Ported Alignment For The 12w6v2 Or 10w6v2 And Is Shipped Wired, Loaded And Ready To Install. Both The 10in And The 12in Models Use Our Patented, Chamber-coupled Port Design. The Slot-port Wraps Around The Inner Enclosure And Terminates Just Above The Woofer. This Provides The Necessary Surface Area And Port Length To Maximize The Performance Of The W6v2’s. The Recessed Mounting Baffle Also Provides Protection For The... Less

JL Audio 12W3v3-4 W3v3 Series 1000 Watts 12" Single 4 Ohm Car Audio Subwoofer JL Audio W3v3 Series 12W3v3-4 1000 Watts Max, 12" Single 4 Ohm Car Audio Subwoofer 12" Single 4 Ohm W3v3 Series Subwoofer Peak: 1000 watts RMS: 500 watts Recommended Power Range: 100-500 watts Impedance: Single 4 ohms Mineral-filled polypropylene upper cone with a metallic JL Audio medallion logo gives the W3's a whole new, classy and sophisticated look NBR (Nitrile Butadiene Rubber) surround DMA-optimized, long linear excursion capability to virtually eliminate distortion and increase sound output Perform outstanding in compact sealed or ported enclosures DMA (Dynamic Motor Analysis) modeling to deliver unsurpassed dynamic stability and low-distortion operation within intended power range Sensitivity: 87 dB... Less

The 10-inch Jl Audio 10W3V3-2 is a sleek and compact piece of kit packed with lots of power. With a 1000 Watt Peak Power handling this Jl Car Subwoofers powerful thump is sure to blow you off. The 85.37 dB sensitivity of Jl Audio 10W3V3-2 makes this mobile subwoofer a perfect blend of power and refinement. The Jl Car Subwoofers 9.06-inch mounting diameter ensures minimum wastage of your cars boot space. Be it the subtle bass guitar or the indefinite thump of the bass drum, with this mobile subwoofer you simply feel the punch.

The 10W6v2 is a great choice for those seeking audiophile sub-bass performances with strong output capability in very compact enclosures. Exceptional linear excursion capability and highly optimized motor and suspension designs ensure linear performance at high power levels. Patented cooling technologies enhance reliability and linearity. Well suited for compact sealed or ported enclosure designs. Descriptions: 10" subwoofer with dual 4-ohm voice coils polypropylene W-Cone with polyester foam surround solid cast-alloy basket power range: 150-600 watts RMS peak power handling: 1200 watts frequency response: 23-250 Hz sensitivity: 83.7 dB top-mount depth: 6-15/16" sealed box volume: 0.625 cubic feet ported box volume: 0.75 cubic feet.

D2F Padded Covers and Cases make excellent gifts for family members, band members, or friends. A D2F Padded Cover or Case is a gift you will be proud to give or receive. D2F Padded Covers are setting new standards for quality, protection, fit, and value . We offer Padded Covers for a variety of music oriented items. Please visit our eBay Store for a complete listing. Brand new D2F "Designed 2 Fit"Padded Cover for a Carr Slant 6V 1x12Amplifier . (The picture is of same type of cover on another b

12in Single 4 Ohm W3v3 Series SubwooferPower Handling: Peak: 1000 WattsRms: 500 Watts Recommended Power Range: 100-500 Watts Impedance: Single 4 OhmsMineral- filled Polypropylene Upper Cone WithA Metallic Jl Audio Medallion Logo Gives The W3's A Whole New, Classy And Sophisticated LookNbr (nitrile Butadiene Rubber) SurroundDma- optimized, Long Linear Excursion Capability To Virtually Eliminate Distortion And Increase Sound OutputPerform Outstanding In Compact Sealed Or Ported EnclosuresDma (dynamic Motor Analysis) Modeling To Deliver Unsurpassed Dynamic Stability And Low-distortion Operation Within Intended Power RangeSensitivity: 87 DbFree Air Resonance (fs): 28.28 HzElectrical Inqin (qes): 0.553Mechanical Inqin (qms): 6.936Total Speaker Inqin (qts): 0.512Equivalent Compliance (vas):... Less

6-1/2in Slick Series 2-way Coaxial Car SpeakersPower Handling: Peak: 480 Watts Per Pair / 240 Watts EachRms: 160 Watts Per Pair / 80 Watts EachMinimum: 90 Watts Per Pair / 45 Watts EachRigid Polypropylene Woofer ConeInverted Surround Extends Low Frequency ResponsePei Tweeter Offers Extended High Frequency ResponseSteel Mesh Grille Provides Superb Speaker ProtectionRubber Gasket Ensures A Perfect Seal When Mounting The SpeakerSingle Spider Provides Woofer Cone Control And StabilityRemovabl e Rubber Boot For Magnet ProtectionAlloy Torsion Basket Provides Rigidity And Support For Moving PartsSpade Terminals For Ease Of InstallationSingl e 10oz. Y30 Rated Ferrite Magnet For More Power4 Ohms Impedance1in Voice Coil DiameterTop- mount Depth: 2-1/8inAlso Found As: Slick60-v3, Slick 60-v3,... Less

The JL audio 12W3v3-4 car subwoofer is a 12 inch Single 4 Ohm speaker, with Peak Power Handling of 1000 watts and a nominal rating of 500 watts RMS. The 4 ohms impedance of this car audio system ensures clear reproduction of even the heaviest bass. Constructed from a Mineral-filled polypropylene upper cone the JL Audio 12W 3v3-4 car subwoofer is durable enough to perform for days. The JL Audio 12W 3v3-4 has a NBR surround that helps in delivering the sound with the right punch. With a metallic JL Audio medallion logo, this car audio system looks classy and sophisticated.

Coaxial speakers have the tweeter built into the cone rather than a separate mountable tweeter and crossover as that of a component kit. The build in PEI tweeter in Slick coaxial speakers offers smoother high frequency response, for better clarity and definition of sound. Slick Co-axial Speakers feature a shallow mounting depth that allows fitment in even the narrowest of spaces. Built to VIBE's high standards of speaker design these custom fit speakers offer great performance and excellent value.a) The Rubber Gasket provides a perfect seal when mounting the speaker and included Steel Mesh Grill can be used to provide excellent protection to the speaker cone. The in-built PEI Tweeter offers extended high frequency response for added depth and superior sound quality. The super lightweight... Less

The JL audio 12W3v3-4 car subwoofer is a 12 inch Single 4 Ohm speaker, with Peak Power Handling of 1000 watts and a nominal rating of 500 watts RMS. The 4 ohms impedance of this car audio system ensures clear reproduction of even the heaviest bass. Constructed from a Mineral-filled polypropylene upper cone the JL Audio 12W 3v3-4 car subwoofer is durable enough to perform for days. The JL Audio 12W 3v3-4 has a NBR surround that helps in delivering the sound with the right punch. With a metallic JL Audio medallion logo, this car audio system looks classy and sophisticated.

Give the music system in your car a perfect treat with the JL Audio 13W6V2 speaker and enjoy outstanding audio response. The peak power handling of this JL Audio component speaker is 1500Watts that creates an atmosphere of discotheque inside your car. The woofer cone of this JL Audio car speaker is shaped in unibody design, which is extremely stiff and light ion weight. The JL Audio 13W6V2 features floating cone attach method that gives proper surround sound output. This 13.5-inch JL Audio component speaker is wrapped in forced-air-cooled aluminum alloy frame that delivers quality sound and power handling. Make your journeys worthwhile with this JL Audio car speaker and take pleasure in listening to super sonic music.

SquareTrade AP6.0 Template By Froo! 2 JL Audio 12W1V2-4 12" Subwoofers 4 Ohm Car Subs Pair Purchase is For 2 (One Pair) JL Audio 12W1V2-4 1200 Watts Max, 12" Single voicecoil 4 ohm Subwoofers Brand New, Not Refurbished Features:12" Single 4 Ohm W1v2 Series Subwoofer Power Handling:Peak: 600 watts per sub RMS: 300 watts per sub Recommended Power Range: 50-300 watts Impedance: Single 4 ohm Injection- molded, metallic-finish polypropylene cone woofer Customizable trim ring Vented reinforcement coll

Features: Power: 500 Watts RMS1000 Watts Peak 2 Ohm Impedance Mineral-filled polypropylene cone woofer Nitrile- butadiene rubber surround DMA-optimized, long linear excursion capability to virtually eliminate distortion and increase sound output Vented reinforcement collar improves rigidity and stability of the cone, spider, and voice coil Spider and lead wire assembly Elevated frame cooling enhances power and sound quality Floating Cone Attach Method allow the cone and surround to be aligned independently Sensitivity: 86 dB Sealed Box Volume0.625cubic feet Ported Box Volume1.125cubic feet Top Mount Depth5.93" Cutout Diameter9.0625" 1 Year Techronics Warranty!

Vibe Space Subwoofer Features12in Dual 2 Ohm Space Series SubwooferPower Handling:Peak: 3000 WattsRms: 500-1000 WattsImpedance: Dual 2 OhmsOne Piece Alloy Cone Delivers Unmatched Weight And Dynamics, Resulting In More Efficient CoolingSingle Spider Provides Control And Stability For The Woofer ConeSpecially Designed Cone Support Adds Rigidity Without Excessive WeightCone Designed Using Finite Element Analysis To Ensure Maximum Rigidity To Weight RatioMoving Parts Of The Subwoofer Can Be ReplacedMulti- roll Surround Achieves Better Linearity Throughout The Woofers Excursion RangeHeavy Gauge Cable Connects Directly To The Voice Coil For Easy WiringAlloy Gasket Made From High Quality Machined AluminumMachined Cast Aluminum Basket For High Rigidity And SupportMechanical Thermal Unity... Less

6in X 9in Slick Series 3-way Tri-axial SpeakersPower Handling: Peak: 960 Watts Per Pair / 480 Watts EachRms: 320 Watts Per Pair / 160 Watts EachMinimum: 160 Watts Per Pair / 80 Watts EachRigid Polypropylene Woofer ConeInverted Surround Extends Low Frequency ResponsePei Tweeter Offers Extended High Frequency ResponseSteel Mesh Grille Provides Superb Speaker ProtectionRubber Gasket Ensures A Perfect Seal When Mounting The SpeakerSingle Spider Provides Woofer Cone Control And StabilityRemovabl e Rubber Boot For Magnet ProtectionAlloy Torsion Basket Provides Rigidity And Support For Moving PartsSpade Terminals For Easey Of InstallationSingl e 20oz. Y30 Rated Ferrite Magnet For More Power4 Ohms Impedance1in Voice Coil DiameterTop- mount Depth: 2-15/16inOther Search Terms: Slick 693, Slick693,... Less

The "H.O." in JL Audio's H.O. Wedge enclosed subwoofer systems stands for "High Output," and that's exactly what you'll hear and feel. High Output Wedges deliver efficient, accurate bass, with better sound quality than conventional ported and bandpass boxes. The woofer sits in recessed baffle, part of a separate chamber within the enclosure, and the front-firing port output combines with woofer output for extremely efficient performance.

12in Single 4 Ohm Slick Series SubwooferPower Handling:Peak: 1200 WattsRms: 400 WattsMinimum: 200 WattsImpedance: Single 4 OhmOne Piece Polypropylene Cone Increases The Depth And Clarity Of BassInverted Rubber Surround Offers Extended Low Frequency ResponseSeamless Surround Looks Great And Provides Greater StrengthRubber Mounting Gasket Ensures A Perfect Seal When Mounting The SpeakerDual Spider Assists In The Control And Stability Of The Cone With High Power HandlingAlloy Torsion Basket Provides Rigidity And Support For Motor And Moving PartsRemovable Magnet Boot Cover Provides Excellent Magnet ProtectionSpring Terminals Allows Ease Of Installation For Heavy Gauge Speaker Wire2in Aluminum 2-layer Voice CoilSingle 50 Oz. Ferrite Magnet For High Power HandlingLarge Y25 MagnetCompatible... Less

With peak power handling of 300 Watt, the JL Audio 12W1v2-4 car subwoofer provides louder and clearer music. This JL Audio 1-way subwoofer has 86.81dB sensitivity that adds a refreshing intensity to the sound. Featuring 4-ohms impedance, this JL Audio 12-inch subwoofer offers high level resistance and increases bass and mid output. This JL Audio 1-way subwoofer is capable of producing a whole range of sounds for a complete acoustic experience with the 22-200 Hz frequency response. This non-enclosed JL Audio 12-inch subwoofer is a component system that significantly improves the quality of the sound. With a top mounting depth of 5.09-inch, you can easily fix the JL Audio 12W1v2-4 car speaker anywhere in your vehicle.

Speaker Features:6-1/2in Black Air Series 2-way Component SystemPower Handling: Peak: 720 Watts Per Set / 360 Watts Each SideRms: 240 Watts Per Set / 120 Watts Each SideFiberglass Cone Made From A 3 Layer Honeycomb FiberglassPolyure thane Surround For Fast Precise Damping1-1/2in (38mm) Silk Dome TweeterAluminum Alloy Front GasketRemovable Steel Mesh Grill For Excellent ProtectionSingle Spider For Control And Stability Of The Woofer ConeAlloy Torsion Basket Offers Strength And Thermal Power HandlingScrew Terminals Firmly Hold Heavy Gauge Wire In PlaceExtended Low Frequency Response With Extreme AccuracySeparate Passive Crossover Network4 Ohms Impedance1-3/8in (35mm) Voice Coil Diameter13 Oz. Y35 Ferrite MagnetTop-mount Depth: 2-5/8inAlso Found As: Ba6v2, Ba6-v2, Ba-6v2, Ba 6v2Authorized... Less

13in Dual 4 Ohm W6v2 Series SubwooferPower Handling:Peak: 1500 WattsRms: 750 Watts Recommended Power Range: 200-750 Impedance: Dual 4 OhmW-cone: Unibody Design, Extremely Stiff And LightWoofer Surround TypeFloating- cone Attach Method: Ensures Proper Surround Geometry For Better Excursion And Voice Coil AlignmentPlateau- reinforced Spider Attachment: Relieves Stress From The Spider At High ExcursionsPole And Cone Venting: Removes Hot Air During High Power Operation To Improve Sound Quality And ReliabilityForced -air-cooled Aluminum Alloy Frame: Enhances Power Handling And Sound QualityHighly Optimized Motor Systems: Reduce Distortion, And Improve Transient BehaviorLarge, Progressive-roll Spiders: Optimized To Controls Long Excursion Without Limiting ItCustomizable Trim Ring Can Be Painted... Less

Product Details 3-Way Coaxial 310W Peak/60W RMS Power Frequency Response: 35 - 22,000Hz Sound Pressure Level: 88dB/W.m Crossover Frequency: 5, 8kHz Carbon Mica Cone Woofer Poly-Ether Imide Cone Midrange Poly-Ether Imide Dome Tweeter Strontium Ferrite Magnet (Woofer) Ferrite Magnet (Midrange) Hybrid Surround Mounting Depth: 78.5 mm Product Features Speaker Size Tweeter Size (In.) Max. Power Output (Watts) RMS Power Output (Watts) Speaker Type Frequency Response Sensitivity (dB) 6 x 9 Inch

Lite Air Speaker Specifications: 6-1/2in Lite Air Series 2-way Shallow Mount Car Component SystemPower Handling: Peak: 600 Watts Per Set / 300 Watts Each SideRms: 200 Watts Per Set / 100 Watts Each SideMinimum: 100 Watts Per Set / 50 Watts Each SideKevlar Cone Woven With FiberglassPolyure thane Surround3/4in Silk Dome Tweeter For Smooth High Frequency ResponseAbs Gasket Holds The Speaker Grill In PlaceSingle Spider Structure Assists The Linearity Of The Woofer ConeAlloy Torsion Basket For Strength And Thermal Power HandlingScrew- set Terminals Holds Heavy Gauge Speaker Wire SecureSpeed Bass Provides An Extended Low Frequency ResponseSeparate Crossover Networks For Advanced Sound FilteringIncludes Speaker Grilles4 Ohms Impedance1in High Temperature Voice Coil0.6 Oz. Neodymium Magnet... Less

JVC CS-V617 + NVX Sound Dampening RMS: 60 watts per pair / 30 watts each Carbon mica cone material Rubber coated cloth surround Dual cone design Includes grille for spearer protection 4 ohms impedance High temperature voice coil 6.4 oz magnet structure Top-mount depth: 1-3/4" L x 10"W 20 ft. of 16 AWG KICKER X-Series Speaker Wire Get high quality sound from Kicker's twisted-pair, true to gauge speaker wire. 50 ft. of 14 AWG StreetWires Speaker Cable Streetwires Super Cable provides a zero-grip insulation for a smooth install as well as true gauge twisted wire construction. Sound Dampening Material Get optimal sound from your new speakers with some high quality sound dampening material. It will keep the road noise out and the music inside the car. Eliminate speaker distortion, road noise,... Less

12-inch subwoofer driver (500W, 4 ohm) 12" 4-ohm subwoofer mineral-filled polypropylene cone with nitrile-butylene rubber surround power range: 100-500 watts RMS peak power handling: 1,000 watts frequency response: 22-200 Hz sensitivity: 87.15 dB top-mount depth: 6-5/8" sealed box volume: 1.125 cubic feet ported box volume: 1.75 cubic feet  warranty: 1 year

BRAND NEW TOP OF THE LINE JL AUDIO 12W3V3-4 12" 500 WATT RMS SUBWOOFER Features: JL Audio 12W3V3-4 12" 4 Ohm W3 Subwoofer 500 watts RMS (JL Watts) Impedance: Single 4 ohms Mineral-filled polypropylene upper cone Nitrile Butadiene Rubber surrounds DMA-optimized, long linear excursion capability Clean sound Quality with no distortion Big power even with small sealed or ported enclosures Dynamic Motor Analysis Sensitivity: 87 dB Free Air Resonance (Fs): 28.28 Hz Electrical "Q" (Qes): 0.553 Mechanical "Q" (Qms): 6.936 Total Speaker "Q" (Qts): 0.512 Equivalent Compliance (Vas): 2.729 cu. ft (not recommended box size) Xmax Linear Excursion: 0.510 in. / 13.0 mm Driver Displacement: 0.071 cu. ft.

General Features:6-1/2in Slick Series 2-way Component SystemPower Handling:Peak: 540 Watts Per Set / 270 Watts Each SideRms: 180 Watts Per Set / 90 Watts Each SideLightweight Injection-molded Polypropylene (impp) Woofer ConeEnhanced Polyurethane Speaker SurroundInverted Surround Geometry Delivers Low Frequency Response3/4in Silk Dome Tweeter DiaphragmSeparate Passive Crossover NetworkSteel Angular Torsion Chassis Supports The Motor And Moving Speaker PartsSpade Terminals Allow Ease Of Installation With Minimal ProtrusionShallow Design Allows Maximum Installation Flexibility10oz. Ferrite Magnet Motor StructureIncluded Rubber Gasket Ensures A Perfect Seal When Mounting The SpeakerRubber Magnet Boot Protects The Magnet And Can Be Removed For Shallower Installations4 Ohms ImpedanceTop-... Less

6-1/2in Single 4 Ohm W3v3 Series SubwooferPower Handling:Peak: 300 WattsRms: 150 Watts Recommended Power Range: 40-150 Watts Impedance: Single 4 OhmMineral- filled Polypropylene Cone WooferRubber SurroundDma Optimized Motor SystemElevated Frame CoolingVented Reinforcement CollarFloating Cone Attach Method (fcam)Insert Molded Suspension, Coil, And Terminal-sub AssemblySurround Stress Relief DesignCustomizabl e Trim RingSensitivity: 80 Db1-year Sonicelectronix. com Warranty

JL Audio 12W3v3-4 - 2010 Sensitivity: 87.15 dB. RMS Power Range : 75-300 Watts. Peak Power Handling: 600 Watts. Impedance: 4 Ohm. Diameter: 12 Inch

Accessories & Subwoofer Grills Amp Installation Kits Capacitors Car Alarms CD & MP3 Players Component Speakers DVD Players EQ & Sound Processors Indash DVD Players Marine Audio Mono Amplifiers Multi Channel Amplifiers Navigation Sound Deadning Speakers Subwoofer Enclosures Subwoofers Others JL AUDIO BADGE-BP-W6v2-SM Decorative JL Audio 10W6v2 Logo Badge for use in installations Each purchase = 1 Brand New Badge! These are brand new, never used, not refurbished. Decorative JL AUDIO Logo Badge for use in installations Replacement badge for 10W6v2 sub woofer Diamond-cut with CD mirror finish Measures 3.5" in diameter What's included: Decorative JL AUDIO Logo Badge for use in installations