Input Voltage: 132 V AC 264 V AC. Input Voltage Range: 90 V AC to 132 V AC 180 V AC to 264 V AC. Output Voltage: 3.3 V DC 5 V DC 12 V DC - 5 V DC - 12 V DC. Frequency: 47 Hz to 63 Hz. Output Power: 300 W. 1 x 20 - pin ATX Motherboard. 1 x 4 - pin ATX Motherboard. 1 x 6 - pin AUX. 1 x 4 - pin LP4 Peripheral Device. 1 x 4 - pin SP4 Floppy Drive. Temperature: 32F (0C) to 122F (50C) Operating. Dimensions: 3.30 Height x 6 Width x 5.50 Depth. Compatibility: AMD Systems. Intel Systems: Pentium 3 Pentium 4. Certifications and Standards: UL CSA FCC TUV NEMKO DEMKO SEMKO FI CE.

Specifications. Mfr Part Number: FSP250-60SPV. Features:. Complied with Micro ATX and ATX12V standard. High efficiency and reliability. Remote On/Off function. Internal 12V DC fan included. Noise Killer (Thermal fan speed control function). Low noise and ripple. Complies with FCC part 15 subpart J Class B and CISPR 22 Class B. Output over voltage short circuit and over current protection. 100% Hi-pot ATE and burn-in tested. Re-settable power shut down. Approved by UL 1950 CSA C22.2 Level 3 TUV EN60950 NEMKO (CB Report) . Input:. Input Range: 115 230Vac AC ± 10% Manual selection. Frequency: 4763 Hz. Input Current: 7A (RMS) @ 115Vac 4A (RMS) @ 230Vac. Inrush Current: 60A Max for 264Vrms AC Cold start . Output:. Total Power: 250 W. Output Voltage:. Minimum Load: +3.3V @ 0.3A; +5V @ 1.0A;... Less

SNAP power supplies provide the best source of AC or DC power for your Opto 22 SNAP PAC hardware. Packaged in a compact and sturdy housing, SNAP power supplies include a built-in fuse, an LED status indicator, and an on/off power switch for ease of use. The SNAP-PS5-24DC power supply is designed to provide 5 VDC power for a SNAP PAC rack with an I/O processor (SNAP PAC brain or R-series controller) and I/O modules mounted on the rack. The combination of a rack, processor, and modules is called an I/O unit. Opto 22 recommends using one SNAP power supply for each I/O unit. Choose the power supply based on the load required for the I/O unit. Each SNAP power supply can be mounted in one of two ways: next to the SNAP I/O unit it powers, using the standard panel-mounting base, or directly on a... Less

Lighted on/off switch Overheating protection Convenient cigarette lighter plug lets you power Anything that will run off a 12V Car cigarette lighter Red/Black terminal post Outputs: 13.8V DC at up to 3 Amps Continuous Dimensions: 5.32 W x 1.93 H x 5.12 D

NuForce proudly introduces a series of linear power supplies that more than meet the needs of the most discriminating audio enthusiasts. Whether for desktop applications or main-system use, the LPS Series delivers crystal-clear low-noise power for devices requiring 15 volts DC at 4 amps or less. Designed for use with NuForce products such as the Icon HDP Desktop DAC/Preamp and CDP-8 Compact Disk Player, an LPS is likely to improve the performance of any audio device requiring up to 4 amps of DC current, particularly with respect to detail and transparency. The LPS line-up starts with the LPS-1, which features a single 15V/4A output for users requiring power for only one device. The LPS-1's highly regulated delivery system operates by way of a large, proprietary transformer, high-energy... Less

Precision with Programmable 200 Watt Output DC Power Supply 382280 .............. 40V/5A Precision Programmable DC Power Supply Features: ? High resolution (1mV and 1mA) user programmable output and two fixed outputs of 5V and 3.3V ? Selectable constant Voltage or Current modes ? Auto output of up to 200 steps with programmable Voltage, Current and time ? Programmable over Voltage protection ? 0 to 60 second programmable overload delay timer ? Storage/Recall memory for 200 test setups ? High stability with low ripple and noise ? Forced air cooling fan ? Bi-directional PC interface commands allow setup and readback using Windows?? HyperTerminal or similar PC communications programs ? Dual output terminal for source and monitor connections ? Dual high contrast LCD display with backlighting... Less

Specification Mfr Part Number: ATX-350PN-B204 Features: Complied with ATX12V 2.0 standard High efficiency Low noise and ripple and reliability Remote On/Off function Internal 12V DC 120mm fan included Noise Killer (Thermal fan speed control function) Complies with FCC part 15 subpart J Class B and CISPR 22 Class B Output over voltage short circuit and over current protection 100% Hi-pot ATE and burn-in tested Re-settable power shut down Approved by UL 60950 TUV IEC 60950 NEMKO + CB Report With 20pin and SATA connectors Input: Input Range: 100 132 Vrms or 200 264 Vrms manual selection Frequency: 47 63 Hz Input Current: 8A (RMS) @ 115Vrms/60Hz 4A (RMS) @ 230Vrms/50Hz Inrush Current: 100A Max cold start 120A Max warm start measured at 264Vrms/50Hz Output: Total Watts: 350 W +3.3V and +5V... Less

High Platform Maintenance Lift Two Person, DC Powered Accomplish maintenance safely and quickly. Slip resistant work platform is completely enclosed with 42"H guardrails with mid-rails and a 4" toe guard on 3 sides. 32"W base fits through standard doorways. Leveling jacks provide stability on uneven surfaces. Control panel is mounted on the platform. Built-in ladder with handrails provides easy access to platform in lowered position. Meets or exceeds ANSI standards. Gray enamel finish standard, or add Model #237360 to upgrade to the Safety Orange finish. This Two-Person DC Lift runs on 2 deep-cycle batteries that recharge using a 110V outlet and provide 80-100 lift cycles in between charges. Supports a 500 lb. capacity and includes four 8" casters.

Audio & Stage Effects Bicycle Motorized Engines Business & Industrial Everything Else Exercise & Fitness Gardening Equipment Heat Press Machines Home Outdoor Kitchen & Bath Massage Spa Equipment Popup Drain Pet Supplies Photo Studio Equipments Door lock Towel Rack Toys & Kids Cellular Phone Accessories 30v Precision Variable Voltage Power Supply DC Converte Lab Precision PS305 DC Power Supply is specialized for scientific research, product modification, mobile computer repair and widely used by laboratories, universities, etc. This DC Power Supply features a very high quality variable 0-30V and current 0-5A. High reliability, low noise and circuit overload protection, excellent choice for business. Features: Compact Design All Metal Construction Dual LED Three Digital Tube Display Current... Less

The 12V Dimmable Driver is a steady low voltage power driver perfect for supplying dimmable LED lights. Have you been searching everywhere for a way to dim your LED lights by using a household dimmer switch? Look no further. This 12V DC transformer-- which is available in 20W, 60W, 100W, 200W and 300W versions--can be used to power any of our dimmable LED lights, and allows you to install our low voltage LED light fixtures while using a common 120V magnetic low voltage dimmer. 12V Dimmable Drivers can be dimmed with a standard AC magnetic low voltage dimmer, with no external fusing required. This DC driver is designed for high voltage AC dimmer switches that are rated for use with magnetic low voltage loads or that are stated to have symmetric forward phase control. This driver is not... Less

Two 0 to 30V/0 to 5A outputs with selectable Constant Voltage and Constant Current modes ? Outputs up to 60V in series mode or 10A in parallel mode ? Two auxiliary outputs with fixed current of 3 to 6.5V/3A and 8 to 15V/1A ? Overload and short circuit protection ? Complete with power cord and 4 pairs of test leads (banana plug to alligator clip)

This high efficiency UL-60950-1 approved AC-DC power converter provides a highly regulated output DC voltage of 13.8 Volts at 30 Amps with an AC input of 120 Volts 60 Hz (230 Volts 50 Hz possible models also available). These advanced switch-mode DC power supplies were designed specifically for land mobile radio applications. The power supplies produce clean reliable power and are highly filtered to suppress RFI. The unit comes with a detachable power supply cord with NEMA 5-15P plug. Features include over-current short-circuit and over-temperature protection. The AC-DC power supply conforms to FCC Part 15(B) class B digital device.

Everything Else Exercise & Fitness Gardening Equipment Heat Press Machines Home Outdoor Kitchen & Bath Massage Spa Equipment Popup Drain Pet Supplies Photo Studio Equipments Door lock Towel Rack Lab Precision PS305 DC Power Supply is specialized for scientific research, product modification, mobile computer repair and widely used by laboratories, universities, etc. This DC Power Supply features a very high quality variable 0-30V and current 0-5A. High reliability, low noise and circuit overload protection, excellent choice for business. Features: Compact Design All Metal Construction Dual LED Three Digital Tube Display Current mA / A Conversion Display High Stabilized Output Voltage Short Circuit Protection Over Loading and Current Protection Weight: 11 lbs Operating Conditions Supply... Less

48V DC POWER SUPPLY 1 PER IS CONTROL UNIT

Specifications Mfr Part Number: V500 Features: 120mm silent fan design long life noiseless and fastest cooling time Specially selected components & high performance heat sink to cool down system Serial ATA 150 ready & fully support all AMD & Intel series demand Cable-tube on main power cables for better cable routing and neatness Universal Connector Fits Most of Branded Motherboard Over voltage protection short circuit protection on all output level MTBF > 100 000 hours @ 25°C Wattage: 500 W AC Input: 100132 / 200264 V AC Output: Current: +3.3V@30A +5V@45A +12V1@18A +12V2@16A -12V@1A +5VSB@2.5A Combined (Max): +3.3V&+5V @ 275W; +12V1&+12V2 @ 380W Connectors: 1x 20/24pin Main Power; 1x 4pin 12V; 1x SATA; 4x Peripheral; 1x Floppy

Specifications. Mfr Part Number: V-500. Features:. 120mm silent fan design long life noiseless and fastest cooling time. Specially selected components & high performance heat sink to cool down system. Serial ATA 150 ready & fully support all AMD & Intel series demand. Cable-tube on main power cables for better cable routing and neatness. Universal Connector Fits Most of Branded Motherboard. Over voltage protection short circuit protection on all output level. MTBF > 100 000 hours @ 25°C . Wattage: 500 W. AC Input: 100132 / 200264 V AC. Output: . Current: +3.3V@30A +5V@45A +12V1@18A +12V2@16A -12V@1A +5VSB@2.5A. Combined (Max): +3.3V&+5V @ 275W; +12V1&+12V2 @ 380W . Connectors: 1x 20/24pin Main Power; 1x 4pin 12V; 1x SATA; 4x Peripheral; 1x Floppy

The 12V Dimmable Driver is a steady low voltage power driver perfect for supplying dimmable LED lights. Have you been searching everywhere for a way to dim your LED lights by using a household dimmer switch? Look no further. This 12V DC transformer-- which is available in 20W, 60W, 100W, 200W and 300W versions--can be used to power any of our dimmable LED lights, and allows you to install our low voltage LED light fixtures while using a common 120V magnetic low voltage dimmer. 12V Dimmable Drivers can be dimmed with a standard AC magnetic low voltage dimmer, with no external fusing required. This DC driver is designed for high voltage AC dimmer switches that are rated for use with magnetic low voltage loads or that are stated to have symmetric forward phase control. This driver is not... Less

Perfect for Home Shop and Hobbyist. Built-in Cooling Fan w/On-Off Switch. Input: 115V AC 60Hz 750 Watts. Output: 13.8V DC Not Adjustable. 35 AMP Constant/40 AMP Surge. Powers 12V DC Devices such as Cellular Phones CB Radios Scanners HAM Radios Autosound Systems etc. Screw Terminal Connectors. Crowbar Over Voltage Protection. Electronic Overload Protection w/Auto Reset. Short Circuit Thermal Protection. Fuse Protected. 3 Prong Grounded AC Plug. Heavy Duty Cabinet Heatsink with Anti-Skid Rubber Feet. Dimensions: 12.5 L x 13.20 W x 5.31 H.

High Platform Maintenance Lift Two Person, DC Powered Accomplish maintenance safely and quickly. Slip resistant work platform is completely enclosed with 42"H guardrails with mid-rails and a 4" toe guard on 3 sides. 32"W base fits through standard doorways. Leveling jacks provide stability on uneven surfaces. Control panel is mounted on the platform. Built-in ladder with handrails provides easy access to platform in lowered position. Meets or exceeds ANSI standards. Gray enamel finish standard, or add Model #237360 to upgrade to the Safety Orange finish. This Two-Person DC Lift runs on 2 deep-cycle batteries that recharge using a 110V outlet and provide 80-100 lift cycles in between charges. Supports a 500 lb. capacity and includes four 8" casters.

Premium AC To DC Switching Power Adapter With 12V DC 1A Output Premium AC/DC Switching Power Adapter With 12V DC 1A Output High quality switching AC to DC 12V 1A power supply. This power adapter can handle international voltages from 110V to 240V 50/60Hz switching inputs automatically and outputs in DC type at 12V 1000mA. This power adapter uses the common tip with a 5.5mm OD / 2.1mm ID tip, great replacement power adapter solution for many electronic devices such networking switches, routers, modems, CCTV cameras, home electronic appliances, etc. Switching power supply for worldwide use. Smart device surge protection for over voltage, temperature and short circuit protection. Strong built for heavy duty and long usage performance. Red LED indicator for power status. UL-approved switching... Less

Perfect for Home Shop and Hobbyist Built-in Cooling Fan Input: 115V AC 60Hz 500 Watts Output: 615V DC(Adjustable) 22 AMP Constant/25 AMP Surge Powers 615V DC Devices such as Cellular Phones CB Radios Scanners HAM Radios Autosound Systems etc. Screw Terminal Connectors Crowbar Over Voltage Protection Short Circuit & Thermal Protection Fuse Protected LED Condition Indicators 3 Prong Grounded AC Plug Heavy Duty Cabinet & Heatsink with Anti-Skid Rubber Feet Electronic Overload Protection w/Auto Reset Dimensions: 11.81 L x 9.05 W x 7.08 H

Perfect for Home Shop and Hobbyist Input: 115V AC 60Hz 270 Watts Output: 13.8V DC 12 AMP Constant/14 AMP Surge Powers Cellular Phones 12V DC CB Radios Scanners HAM Radios Autosound Systems Screw Terminal Connectors Electronic Overload Protection w/ Auto Reset Short Circuit & Thermal Protection Fuse Protected LED Condition Indicators Heavy Duty Cabinet & Heatsink with Anti-Skid Rubber Feet Dimensions:7.87 L x 7.16 W x 4.72 H

Perfect for Home Shop and Hobbyist. Input: 115V AC 60Hz 50 Watts. Output: 13.8V DC. 3 AMP Constant/4 AMP Surge. Powers Cell Phones 12V DC CB Radios Scanners etc. Screw Terminal Connectors. Electronic Overload Protection w/ Auto Reset. Short Circuit Protection. Fuse Protected. Heavy Duty Cabinet and Heatsink with Anti-Skid Rubber Feet. Dimensions: 7.48 L x 4.92 W x 3 H.

Features/Specific ations: 12 VDC, 16 OUTPUTS 12 AMP TOTAL OUTPUT CURRENT INTEGRAL SURGE PROTECTED 800 mA PER OUTPUT 100V-240V OPERATION CAN BE USED ANYWHERE IN THE WORLD* * w/ appropriate UL or foreign CE power cord ON / OFF SAFETY SWITCH WITH LED VENTED HOUSING FOR COOLER OPERATION 3 CONDUCTOR POWER CORD INCLUDED (US TYPE) 16 INDIVIDUAL PTC OUTPUT PROTECTION W/ LED POWER INDICATION UNIQUE PRE-DRILLED TOP MOUNTING FLANGE ALLOWS EASY WALL MOUNTING WITHOUT ACCESS TO INSIDE OF THE UNIT OVERALL DIMENSIONS: 11.25?x 11.25?x 3.75? INCLUDES MULTI-LINGUAL INSTRUCTION SHEET WEIGHT: 7.375 LBS

Protect your batteries from being over charged with this charge controller. Without it you could dramatically shorten the life of your battery / powerpack. Your battery / power pack has a limit on how high of a voltage it can see while charging. One term to describe this voltage is called the "Peak Charge Voltage". If you pedal too fast and generate too high of a voltage, then you could exceed the peak charge voltage and supply your battery with too much current. This would damage the cells inside and affect their ability to take a charge. In most cases the peak charge voltage for a lead acid / AGM (absorbed glass mat) battery / powerpack is somewhere near 14.8V DC (V= Volts DC= Direct Current). This NC25A charge controller has a diversion load output (diversion load slows down or... Less

This high efficiency UL-60950-1 approved AC-DC power converter provides a highly regulated output DC voltage of 13.8 Volts at 10 Amps with an AC input of 120 Volts 60 Hz (230 Volts 50 Hz model also available). These advanced switch-mode DC power supplies were designed specifically for use with land mobile radio. The power supplies produce clean reliable power and are highly filtered to suppress RFI. The unit comes with a detachable power supply cord with NEMA 5-15P plug. Features include over-current short-circuit and over-voltage protection. The AC-DC power supply conforms to FCC Part 15(B) class B digital device.

NTDK78AA Option 11C AC/DC Power Supply Features Provides AC/DC power for your Option 11C cabinet Accommodates a reserve power system Can provide power for one attendant consoles Generates system line transfer signal for PFTU Provides ring generator for telephones Compatibility Compatible with Option 11C Buy with Confidence. Your order also includes: MetrolineDirect's Rock Solid One Year Warranty

Specification Mfr Part Number: ATX-400PN-B204 Features 20/24pin Main Power connector; SATA connector Complied with ATX12V 2.0 standard High efficiency and reliability Remote On/Off function Internal 12V DC 120mm Ball Bearing fan included Noise Killer (Thermal fan speed control function) Low noise and ripple Complies with FCC part 15 subpart J Class B and CISPR 22 Class B Output over voltage short circuit and over current protection 100% Hi-pot ATE and burn-in tested Re-settable power shut down Approved by UL 60950 IEC 60950 TUV EN60950 NEMKO (CB Report) Input: Input Range: 100 132 Vrms or 200 264 Vrms Manual selection Frequency: 47 63 Hz Input Current: 8.5A (RMS) @ 115Vrms/60Hz 5A (RMS) @ 230Vrms/50Hz Inrush Current: 100A Max cold start 120A Max warm start measured at 264Vrms/50Hz Output:... Less

The ELK-P412 is a general purpose high current power supply and battery charger. It is ideal for alarm, access control, and CCTV applications requiring up to 4 Amps. The ELK-P412 distributes 12VDC power to three (3) sets of DC power terminals, each having a voltage present indicator LED and automatic resetting overload protection. It also features a master On/Off switch and built-in low battery cut-off to protect the backup battery from deep discharging if AC power is off for an extended time. It may be ordered with a 12 Volt, 8 Ah rechargeable battery by adding the K suffix Features Switching Power Supply, no transformer needed Auto Reset

For sale is a brand new replacement AC Adapter Power Supply Features & Specifications: ------Input voltage 100-240VAC, (world wide) ------Output ................ 9V 1A(1000mA) 9W Input frequency .. 50-60Hz ------Over voltage protection, over heat protection ------Safe standard: UL, CE, RoSH Compatible Model Number: This is Replacement 9VDC 1000mA AC Adapter Power Supply For Many Electronic/Digita l Device with 4mm/1.5mm Plug Tip Packing: 1 unit AC adapter.