With this heavy-duty 15 amp saw, compound miters are easily cut. And with the laser beam cutting guide, youll see exactly where the cut will occur on your workpiece. 12" diameter, 60 tooth C2 carbide-tipped steel blade makes standard miter cuts and compound miter cuts up to 45° to the left or right, and bevels up to 45° to the left. Cutting capacities: 4" x 12-3/16" at 90°, 8-1/4" x 2-1/8" at 45° Cutting angle stops: 0°, 15°, 22.5°, 30° and 45° both right and left Positive bevel stops: 0° and 45° left only Machined aluminum table top with cast aluminum base Includes dust bag, machined aluminum fence, 2 table extensions, and table clamp Laser guide uses two AAA batteries, included. Overall dimensions: 39" L x 20-1/8" W x 26-1/8" H Table size: 19-3/4" L x 6" W

NEW 12" Sliding Compound Miter Saw w/ Laser Guide Condition: New Part Number: 98194 Description: 12" Sliding Compound Miter Saw includes a built-in laser cutting guide for the most accurate cuts With this heavy-duty 15 amp saw, compound miters are easily cut. And with the laser beam cutting guide, youll see exactly where the cut will occur on your workpiece. 12" diameter, 60 tooth C2 carbide-tipped steel blade makes standard miter cuts and compound miter cuts up to 45° to the left or right, and bevels up to 45° to the left. Cutting capacities: 4" x 12-3/16" at 90°, 8-1/4" x 2-1/8" at 45° Cutting angle stops: 0°, 15°, 22.5°, 30° and 45° both right and left Positive bevel stops: 0° and 45° left only Machined aluminum table top with cast aluminum base Includes dust bag, machined aluminum... Less

Miter Saw, Blade Dia. 12 In., Arbor Hole 1 In., Compound 0-45, Bevel Yes, Slide No, 4000 No Load Rpm, 15 A Amps @ 120v, Crosscut @ 90 Deg. H 3-7/8 In., Crosscut @ 90 Deg. W 6 In., Crosscut @ 45 Deg. H 3 7/8 In., Crosscut @ 45 Deg. W 5-1/2 In., Tool Weight 37 Lb., Miter Capacity 0-52, Bevel Capacity 0-45, Includes Carbide Blade, Wrench, Vise, Wrench, Dust Bag

Bosch Ultimate One-handed Portability-With a compact design, comfortable one-handed rear carry handle and optimized center of gravity. Only 43 lbs saw only. Category Best All-around Cut Capacity-6” max crown, 6-3/4" max base against fence, 2” x 8” at 0° and 2” x 6” at 45° cross cut for professional applications. Squarelock™ Quick-Release Fences: High-precision Squarelock fence aligns 90° to table and requires no adjustment; One-touch lock/unlock to slide fence for added support Integrated workpiece supports-Expand to nearly 37" for the highest material support in category. Quick-Reach Bevel Lock-Located on the side of the bevel post for quick an easy adjustments. Large Easy-to-read Uniform Bevel and Miter Sacles-52° R/L miter capacity with marked... Less

10" Compound Miter Saw w/Laser Light "C-UL" TD Industrial Professional 10” compound miter saw w/ laser light • Laser cutting guide for super-accurate cuts • Rated Voltage: 120V - 60Hz • Motor: 12Amp , 1400Watt • Blade Diameter: 10” • Blade Arbor: 5/8“ • No Load Speed: 4,500 RPM • Positive Miter Stops At : 0°, 22.5° & 45° (Left & Right) • Positive Bevel Stops At : 0° & 45° (Adjustable) • Cutting Capacity: 2.95 x 5.32 @ 0° x 0° 2.95 x 3.54 @ 0° x 45° 1.77 x 4.72 @ 45° x 0° 1.89 x 3.86 @ 45° x 45° Left 2.17 x 3.35 @ 45° x 45° Right • Cord Length: 6’ • Table Type: Cast aluminum • Fence Height: 2” • Handle: Soft grip • Bearing Type(s): Ball • Type of Blade Included: 40-tooth carbide-tipped

12" Compound Miter Saw - 3912. Quick-Action Clamp - BB1200. 40-Tooth Carbide Blade - 2 610 910 836. Blade & Stop Wrench - 2 610 910 828. Fence & Base Wrench - 2 610 355 777. Directional Dust Chute - 2 610 910 845. Dust Bag - BB1205 & 12" Compound Miter Saw - 3912. Quick-Action Clamp - BB1200. 40-Tooth Carbide Blade - 2 610 910 836. Blade & Stop Wrench - 2 610 910 828. Fence & Base Wrench - 2 610 355 777. Directional Dust Chute - 2 610 910 845. Dust Bag - BB1205

Compressors & Generators Cordless Tools Drills/Drivers Hand Tools Bosch 12" Compound Miter Saw Crown miting detents - 31.6 degree Miter and 33.9 degree Bevel detents for quick, accurate, crown cuts Large 25" aluminum base with 3-1/4" sliding extension for 28-1/4" total length - Provides extra support Speed-track sliding fence system - Base and fence slide independently Tall 3-1/2" sliding fence - For easy bevel setups and increased crown molding cutting capacities Exclusive wedge and slot miter detent system - Consistent precise and accurate miter angles Miter detent override - For easy setting of any neighboring angle Electric brake - For quick, repetitive cuts; stops blade in seconds Cast and machined scales - Visible for the life of the saw At 45 Miter Left / 45 Bevel Left 2-3/4-in x... Less

Miter Saw, Blade Dia.12 In., Arbor Hole 5/8 And 1 In., Compound Yes, Double Bevel, Slide Yes, No Load Rpm 3800, 115 Volts, 15 Amps @ 120v, 6-3/4 In. Crosscut @ 90 Deg. H, 16 In. Crosscut @ 90 Deg. W, 6-3/4 In. Crosscut @ 45 Deg. H, 11.6 In. Crosscut @ 45 Deg. W, Tool Weight 56.0 Lbs., Miter Capacity 50 To 60, Bevel Capacity 0 To 49, Bevel Stops 9, Features Xps Cross-cut Positioning System, Includes Clamp, Dust Bag

Large Cutting Capacity (3-7/8" x 6" at 90°) Powerful 15.0 AMP motor delivers 4,000 RPM 4-1/2" tall pivoting fence for cutting up to 5-1/2" crown molding Positive miter stops at 9 settings: 15°, 22.5°, 31.6°, 45° right or left and 0° (90° cuts) Horizontal D-handle design for easy and comfortable operation Carbide tipped blade for precision cutting Electric brake for maximum productivity Pivoting fence for supporting larger material Brand new in sealed box.

The C12FCH 12” compound miter saw features an all new aggressive design is equipped with Hitachi’s exclusive laser marker system. It cuts various types of wood, crown molding, plywood, decorative panels, soft fiberboard, hardboard and aluminum sashes with ease.

What the Bosch 12-inch compound miter saw may lack in popularity compared to some of its competitors, it makes up for in quality design and construction. The saw has a heavy-duty 26-inch steel table that extends to 29 inches, and a tall sliding fence for working with crown molding and other large stock. While this isn't the lightest 12-inch saw available, at only 43 pounds it's still plenty portable, and comes with a cushioned top handle for easy carrying to and from the truck. Considering how solid and stable this tool is, and the amount of metal making up the base and table, we were actually surprised to find that it weighs as little as it does. The 15 amp motor on this saw, in typical Bosch fashion, runs remarkably smooth and relatively quiet. The electric brake stops the blade quickly... Less

Cordless Tools Drills/Drivers Hand Tools Heavy-Duty Home Milwaukee 12-in Dual-Bevel Compound Miter Saw Miter Angle Digital Readout - provides repeatable accuracy to 0.1 degrees Miter Angle Fine Adjust with Detent Override - makes it simple to dial-in precise miter angles Dual Integral Jobsite Lights - fully illuminate the work piece and cut line from either side of the blade Powerful 15.0 Amp, 3.3 Max HP Direct Drive Motor - provides increased power for high performance cutting in hard lumber Constant Power Technology with Soft Start - maintains constant cutting speed under load and decreases start up head movement Base Molding - Against Fence 6-in Cord Double Insulated Blade Diameter 12-in Arbor Size 5/8-in / 1-in Max. Bevel Angle Left

15.0 Amp, 3,600 rpm motor delivers extended power and durability Adjustable stainless steel miter detent plate with 11 positive stops Improves productivity and ensures cutting accuracy Precise miter system and machined base fence support optimize cutting accuracy Tall sliding fences support crown molding up to 6-5/8" nested and base molding up to 6-1/2" vertically against the fence while easily sliding out of the way for bevel cuts Innovative gearbox and belt-drive design increases vertical cutting capacity Double bevel design allows saw to bevel left and right 0° - 48° with positive stops at 0°, 33.9°, 45° and 48° both left and right allowing user to flip the saw not the material Exclusive Back Fence Design Cuts 2 x 10 dimensional lumber at 90° and 2 x 8 at 45° Lightweight (44 lbs.),... Less

C12FCH Size: 12" The C12FCH 12'' Sliding Dual Compound Miter saw is equipped with a high fence to support the work piece for stable cutting and a laser marker for precision cuts. Positive stoppers adjust the turn table position for easy miter cutting. The C12FCH cuts various types of wood, plywood, decorative panels, soft fiberboard, hard board and aluminum sashes. Features: -Unique, adjustable laser marker, for precise cutting lines easily adjustable to users preference. -12 Amp motor, intense power for the toughest cutting jobs. -57 miter angle, to the right for ultra flexibility with 45 miter angle to the left. -45 bevel angle range, to the right and left allowing users to quickly and easily flip the saw blade and leave the material in place. -Positive stops on miter and bevel... Less

Shop for Power Tools at The Home Depot. Makita's LS1221 12 in. Compound Miter Saw combines power, performance, and ease of use for most common miter cuts for a range of applications. The 12 in. Miter Saw has a dynamically balanced 15 Amp direct drive motor with 4,000 RPM for improved performance, and is engineered to never slip or bog down like belt-drive units. The Makita LS1221 is engineered for a broad range of trades, including finish carpenters, professional woodworkers, case and base installers, cabinet installers, decking and flooring applications, siding installers, general contractors seeking a best-in-class 12 in. compound miter saw for the jobsite or the benchtop.

Upfront bevel lock lever and range selector knob ? Easily accessed controls for quick and accurate bevel settings Multi-position main handle ? Easily locks into any of four positions Large 25-1/2" Base with built-in cast sliding extensions for 40" total length Exclusive Wedge-and-Slot Miter Detent System ? Consistent and precise miter angles over the life of the tool Crown molding settings ?

Built-in High Output, Fluorescent Light Illuminates Cutting Edge Miter Cuts 52?? Right and 47?? Left With 9 Positive Stops at 15??, 22.5??, 31.6??, 45?? Left or Right and 0?? Powerful 15 AMP Motor Delivers 3,700 RPM Adjustable Pivot Fence for Supporting Larger Stock CRL Makita? 10" Dual Slide Compound Miter Saw can perform slide cuts, precision bevel cuts up to 45 degrees left and right and even compound cuts, as well as conventional press and miter cuts. It has a unique mechanism in the base for a smooth, highly precise cutting action. Cuts up to 12 inch (304 millimeter) in width by 2 inch (74 millimeter) thickness at 90 degrees. Heavy-duty 15 amp motor has an electric brake for fast stopping of blade. Blade tilts 0 to 52 degrees for bevel and compound miter cutting; miter stops at 47... Less

Offers a heavy duty 15 amp motor and dual linear ball bearings for smooth slide action. 5300 RPM Bevels 45° to the left 45°and 90° cutting angles Cutting capacities: 2-3/4" x 12-3/16" at 90° 1-9/16" x 12-3/16" at 45° 10" diameter, 60 tooth C2 carbide tipped steel blade Precision machined aluminum table top with cast aluminum base Easy access brushes Comes with clamp, arbor wrench, and dust bag 120 volts, 60 Hz 5/8" arbor Overall dimensions: 35-1/2" L x 17-3/16" W x 22" H

INCLUDES: 60T Carbide Tipped Blade (A-93712) Vertical Vise (122854-6) Dust Bag (122852-0) Triangular Rule (762001-3) Wrench #2.5 (783208-8) Wrench #13 (782232-8)FEATURES : Powerful 15.0 AMP direct drive motor requires less maintenance and delivers 3 200 RPM Large cutting capacity for up to 8" crown molding (nested) 6-1/2" baseboard (vertical) and 15" crosscut at 90degrees Compact design with a patented 4-Steel Rail Sliding System further increases rigidity to produce superior cuts Independent laser indicates line-of-cut whether blade is turning or not with on/off switch and micro- adjustments for precise "left-of-blade" or "right-of-blade" cutting Exclusive 6 linear ball bearings engineered to deliver smooth solid and adjustment-free "dead-on" accurate cuts Exclusive 5-1/2" tall... Less

About Us | Shipping | Privacy | Returns | Payment Cordless Tools Power Tools Lasers Accessories Storage Boxes Bare Tools Amana Bosch Calculated Industries CST Berger Custom Leather Craft Diamond Products Dremel Fluke Greenlee Hitachi Ideal Irwin Klein Leatherman Lenox Little Giant Makita Marshalltown Milwaukee MultiQuip Occidental Leather Pacific Laser Systems Panasonic PasLode Ramset Trakfast Reed Rhino Ridgid RothenBerger RotoZip Rubbermaid SafeWaze Sait Senco Skil Stabila Sumner TeleSteps Tu

C12FCH Size: 12" The C12FCH 12'' Sliding Dual Compound Miter saw is equipped with a high fence to support the work piece for stable cutting and a laser marker for precision cuts. Positive stoppers adjust the turn table position for easy miter cutting. The C12FCH cuts various types of wood, plywood, decorative panels, soft fiberboard, hard board and aluminum sashes. Features: -Unique, adjustable laser marker, for precise cutting lines easily adjustable to users preference. -12 Amp motor, intense power for the toughest cutting jobs. -57 miter angle, to the right for ultra flexibility with 45 miter angle to the left. -45 bevel angle range, to the right and left allowing users to quickly and easily flip the saw blade and leave the material in place. -Positive stops on miter and bevel... Less

12 15AMP HD DBL-BEVEL COMPOUND MITER SAW"

CPO Search Shop by Category Accessories Combo Kits Compressors Generators Cordless Tools Drills/Drivers Hand Tools Heavy-Duty Home Measuring Tools Metalworking Nailers Staplers Outdoor Products Sanders, Polishers, Grinders Saws Specialty Tools Combo Kits Woodworking Workholding/ Toolholding Makita 12-in Compound Miter Saw Model LS1221 List Price: $379.99 CPO Price: $349.99 You save: $30 (8%) Availability: In Stock Shipping: FREE Shipping Features Powerful 15 Amp motor delivers 4,000-rpm Positiv

Dual Slide Compound Miter Saw, Blade Dia 12 In, Arbor Hole 1 In, Bevel, 3200 No-load Rpm, 15 Amps @ 120v, Crosscut @ 90 Deg H 6 1/2 In, Crosscut @ 90 Deg W 13 7/8 In, Crosscut @ 45 Deg H 6 1/2 In, Crosscut @ 45 Deg W 10 1/2 In, Tool Weight 53 Lb, Miter Capacity 60 Deg, Bevel Capacity 45 Deg, Bevel Stops 0, 22.5, 33.9, 45 Degrees, Linear Ball Bearings, Speed Control, Soft Start, Electric Brake And Laser Light, Includes Dust Bag, Wrench, Clamp And Carbide Blade

Chicago Electric 12" Sliding Compound Miter Saw Includes a built-in laser cutting guide for the most accurate cuts New in Box Features: With this heavy-duty 15 amp saw, compound miters are easily cut. And with the laser beam cutting guide, youll see exactly where the cut will occur on your workpiece. 12" diameter, 60 tooth C2 carbide-tipped steel blade makes standard miter cuts and compound miter cuts up to 45° to the left or right, and bevels up to 45° to the left. Cutting capacities: 4" x 12-3/16" at 90°, 8-1/4" x 2-1/8" at 45° Cutting angle stops: 0°, 15°, 22.5°, 30° and 45° both right and left Positive bevel stops: 0° and 45° left only Machined aluminum table top with cast aluminum base Includes dust bag, machined aluminum fence, 2 table extensions, and table clamp Dual linear slide... Less

For a Limited Time GetFree Ground ShippingThe DW716 Features: * Precise miter system and machined base fence support deliver increased cutting accuracy * Adjustable stainless steel miter detent plate with 11 positive stops delivers repeatable accuracy and worksite durability * 7 hardened steel positive bevel stops at most common angles - 0, 33.9, 45 and 48 left and right * Cam lock miter handle with detent override delivers quick and accurate miter angles * Tall sliding fences support tall materials and easily slide out of the way for bevel cuts * Miters 50 left and 50 right for greater versatility * Powerful 15.0 Amp motor, 3,600 rpm provides extended power and durability * 44 lb weight and built-in carrying handle for increased portability * Accepts DW7187 adjustable miter saw laser... Less

12-in Compound Miter Saw - LS1221. Carbide-Tipped Blade - A-90227. Vertical Vise - 192672-6. (2) Extension Wings - 192673-4. Socket Wrench *13 - 782212-4. Dust Bag - 122523-9. Operating Manual

Makita LS1221 12" Portable Jobsite Compound Miter Saw Warranty: *1 Year** Features Powerful 15 AMP motor delivers 4,000 RPM Positive stops at 9 settings; 15°, 22.5°, 31.6°, 45° right or left and 0° Horizontal D-handle design for easy and comfortable operation Carbide tipped blade for precision cutting Pivoting fence for supporting larger stock Specifications Blade Diameter 12" Arbor 1" Max. Cutting Capacity (Bevel/Miter) at 90°/90°3-7/8 x 6"; at 45°/45°1-3/4" x 5-1/2" No Load RPM 4,000 Carbide tipped blade (A-90227) Vertical vise (192672-6) Extension wing (192673-4)

Cordless Tools Drills/Drivers Hand Tools Heavy-Duty Home Measuring Tools Makita 12-in Slide Compound Miter Saw with Laser and Stand Powerful 15.0 AMP direct drive motor requires less maintenance and delivers 3,200 RPM Large cutting capacity for up to 8-in crown molding (nested), 6-1/2-in baseboard (vertical), and 15-in crosscut at 90 degrees Compact design with a patented 4-Steel Rail Sliding System further increases rigidity to produce superior cuts Independent laser indicates line-of-cut whether blade is turning or not, with on/off switch and micro- adjustments for precise left-of-blade or right-of-blade cutting Exclusive 6 linear ball bearings engineered to deliver smooth, solid, and adjustment-free accurate cuts Exclusive 5-1/2-in tall dual sliding fence system features versatile... Less

Specifications Blade Diameter 12" Amps 15Amps No Load Speed 4,000rpm Arbor Size 5/8" or 1" Vertical Capacity: Baseboard Against Fence 6-1/2" Vertical Capacity: Crown Molding Vertically Nested 5-1/4" Horizontal Capacity: Baseboard Lying Flat 8" Horizontal Capacity: Crown Molding Lying Flat 6-1/2" 45° Bevel Cut Capacity (dimensional lumber) 2x8 90° Cross-Cut Capacity (dimensional lumber) 4x6" 90° Cross-Cut Capacity (Max Width) 2x8 45° Miter Cut Capacity (Max Height) 4x4 dimensional lumber 45