The Rule 1100 bilge pump is designed for smaller boats, this model incorporates all the fully automatic features of the larger pumps. Rule Bilge Pump 1100 unit is fully submersible. Easy clean snap lock strainer with silent and vibrationless operation.

Non-automatic, round version of Rules 1100 G.P.H. pumps Impressive pumping power for size and cost; competitive models are much larger and more expensive 12 volt DC, 3.3 amp draw 1 1/8 in. discharge outlet Meass

Rule Pumps -27S BILGE PUMP 1100GPH- AUTOJABSCO/XYLEM INCThis pump offers impressive pumping power for its size and cost. Most competitive models in this pumping range are much larger and far more expensive. 12 Volts DC unless noted. 1100 GPH automatic. Float switches are not required for these fully automatic pumps. Controlled by computerised operation the pump will turn on every 2.5 minutes for about 1 second to sense for water. If water is present the pump will sense resistance and continue to run until all water is removed. Power use in the checking mode is minimal for the peace of mind that this range of pumps offer.

Manufacturer: Rule Model:RM1100A Rule-Mate® 1100A Fully Automated Bilge Pump The NEW eco-friendly Rule Mate series of Bilge pumps feature a solid state water sensing technology that eliminates the need for a separate float switch. When water enters the bilge and reaches a certain height (2-3/4 inches) a sensor turns the pump on. After the water is pumped out, another sensor shuts the pump off. The sensor's unique "field effect" technology is programmed to recognize the dielectric constant of water only. In the event of an onboard oil spill, straight motor oil that enters the bilge will not turn the pump on. It's part of Rule's continuing commitment to preserving our waterway. The new Rule Mates are available in 500, 750 and 1100 GPH models. Rule has been building bilge pumps for 30-years... Less

Rule RUL27D 1100 GPH manual bilge pump can handle spray and rainwater that can fill a small open boat quickly. Completely submersible, rust and corrosion-free and ignition protected.

The Rule-Mate Series of fully automated bilge pumps contain the pump and the non-mercury float switch in a single, compact housing. As the water level rises, so does the float switch, activating the pump when the water level reaches 2-1/8''. There is no on/off cycling and therefore, no power use until the pump comes on. Features include easy clean snap-lock strainer bases, silent, vibrationless operation, anti-airlock protection, stainless steel shafts, and no burn-out when run dry. 12VDC.

The Rule 1100 offers impressive pumping power f or its size and cost. Competitive models in this pumping range are much larger and far more expensive. Specifications Flow Rate 1100 gph 4164 lph Port Type 1 18quot 28mm ...

Rule 1100The Rule 1100 offers impressive pumping power for its size and cost. Competitive models in this pumping range are much larger and far more expensive. 12 Volts DC unless noted. FEATURESComputeri zed operation - no float switch requiredFully SubmersibleEasy clean snap lock strainerSilent and vibrationless operationAnti- airlock protectionCompact , efficient long life motorIgnition protectedNo burn-out when run dryRust and Corrosion protectionUsed by leading boatbuilders worldwidemarine grade blocked wiring

The Rule 1100 GPH Bilge Pump offers a high level of pumping power for its small size and low cost. Rule Bilge Pumps have set the standard in the marine industry. They are fully submersible and the first choice of yachtsmen and professional commercial fishermen.

Boat / Motor / PWC Boat Covers Boat Fenders Cleaning Supplies Clothing & Apparel Control & Steering Cables Dock & Mooring Electrical Electronics & Instrumentation Engine Parts Fishing Fuel Tanks & Systems Galley General Boating Hardware Interior Leisure & Fun Stuff Lubricants Maintenance & Paint Plumbing Rule Non-Automatic 1100 GPH 12 Volt Bilge Pump This pump offers impressive pumping power for its size and cost. Most competitive models in this pumping range are much larger and far more expensive. 12 Volts DC unless noted.