All bandsaw blades are folded into 3 rings to avoid bulky packaging - The picture depicted represents one blade; the pricing is for one blade/package. A tungsten carbide particle grit bandsaw blade is ideal for cutting abrasive and hardened materials like wire reinforced rubber, steel belted radial tires, ceramics, fiberglass, composites, hardened steel, cast iron (grey with voids), graphite and case hardened materials. For applications greater than 1/4? (6.4mm) in cross-section and use with wood cutting bandsaws. ( Metal cutting bandsaws are not recommended due to much lower speed ) There may be a number of other bandsaws or models that use the same blade lengths as the ones listed: 105 inch ( 8 ft. 9 inch, 8' 9" ) bandsaw blades suit the following models:Jet? JWBS-14DXPRO; General... Less

****LOOK AT THIS FIND****This is a PICK UP ONLY ITEM ..NO SHIPPING...35115 .... Central Alabama .... 40 miles south of Birmingham *****Please Read Ad Fully***** Up for sale is this Lenox Band Saw Blade Lot of Over 100 ( about 105, I think ) like the one shown in the photos. - LESS THAN $10.00 EACH ....This lot includes Many different Measurements/Gaug es/Sizes. All are new in their original boxes. All are large (14 to 17 feet).... They have been warehouse stored .If you are interested in this lo

This carbide tipped bandsaw blade is designed with precision triple chip ground teeth for smooth cuts, excellent finish. The new high performance back steel offers excellent fatigue life. This blade will outlasts carbon steel, M42 bi-metal blades when cutting wood, especially tropical hardwoods i.e. ebony, koa or cocabolo, abrasive non-ferrous materials. It is also ideal for cutting alloy steels, tool steels, bearing steel, carbon steels, stainless steels and mold steels. There may be a number of other bandsaws or models that use the same blade lengths as the ones listed: 105 inch ( 8 ft. 9 inch, 8' 9" ) band saw blades suit the following models:Jet? JWBS-14DXPRO; General International? 90-200 M1 (woodworking 93-1/2? to 106-3/8?); Grizzly? G9743 ( 7? x 12? ),   8145Z (105-1/4? to... Less

4" dust port one 3/8" blade, fence and miter gauge Instruction Manual We took the most popular bandsaw size and added many features only found on much larger and more expensive machines. Features such as extruded aluminum fence and rails, quick release blade tension, miter gauge, upper and lower ball bearing blade guides, enclosed cabinet stand, hinged wheel covers, 4" dust port and powerful 1 HP motor are all standard. And, with its cast iron frame and table, this bandsaw will be a reliable shop fixture for many years to come. Upper and lower ball bearing blade guides All ball bearing construction Fence scale with magnifying window Quick change blade release/tensionin g Motor: 1 HP, TEFC, 110V/220V, single-phase, 1,725 RPM Amps: 14 @ 110V, 7 @ 220V Blade size: 93-1/2" (1/8" to 3/4" wide)... Less

This carbide tipped bandsaw blade is designed with precision triple chip ground teeth for smooth cuts, excellent finish. The new high performance back steel offers excellent fatigue life. This blade will outlasts carbon steel, M42 bi-metal blades when cutting wood, especially tropical hardwoods i.e. ebony, koa or cocabolo, abrasive non-ferrous materials. It is also ideal for cutting alloy steels, tool steels, bearing steel, carbon steels, stainless steels and mold steels. There may be a number of other bandsaws or models that use the same blade lengths as the ones listed: 105 inch ( 8 ft. 9 inch, 8' 9" ) band saw blades suit the following models:Jet? JWBS-14DXPRO; General International? 90-200 M1 (woodworking 93-1/2? to 106-3/8?); Grizzly? G9743 ( 7? x 12? ),   8145Z (105-1/4? to... Less

This carbide tipped bandsaw blade is designed with precision triple chip ground teeth for smooth cuts, excellent finish. The new high performance back steel offers excellent fatigue life. This blade will outlasts carbon steel, M42 bi-metal blades when cutting wood, especially tropical hardwoods i.e. ebony, koa or cocabolo, abrasive non-ferrous materials. It is also ideal for cutting alloy steels, tool steels, bearing steel, carbon steels, stainless steels and mold steels. There may be a number of other bandsaws or models that use the same blade lengths as the ones listed: 105 inch ( 8 ft. 9 inch, 8' 9" ) band saw blades suit the following models:Jet? JWBS-14DXPRO; General International? 90-200 M1 (woodworking 93-1/2? to 106-3/8?); Grizzly? G9743 ( 7? x 12? ),   8145Z (105-1/4? to... Less

This carbide tipped bandsaw blade is designed with precision triple chip ground teeth for smooth cuts, excellent finish. The new high performance back steel offers excellent fatigue life. This blade will outlasts carbon steel, M42 bi-metal blades when cutting wood, especially tropical hardwoods i.e. ebony, koa or cocabolo, abrasive non-ferrous materials. It is also ideal for cutting alloy steels, tool steels, bearing steel, carbon steels, stainless steels and mold steels. There may be a number of other bandsaws or models that use the same blade lengths as the ones listed: 105 inch ( 8 ft. 9 inch, 8' 9" ) band saw blades suit the following models:Jet? JWBS-14DXPRO; General International? 90-200 M1 (woodworking 93-1/2? to 106-3/8?); Grizzly? G9743 ( 7? x 12? ),   8145Z (105-1/4? to... Less

3/4" X 105" X 3 tooth . Hook tooth pattern for fast cutting. Made from M.K. Morse stock, hard edge flex back. The most common size for good resawing performance. Will fit the following saws with riser blocks: Rockwell 14", all current 14" Delta's, Powermatic PWBS-14CS, Jet JWBS-14. Fits the Inca 710 three wheel without a riser.

This new South Bend Metal-cutting Bandsaw is designed with the operator in mind. The quick release vise speeds up production & the 3 speed gear box allows selection of the right speed with just a turn of the dial. Hydraulic fine feed control & 4 bearings support the blade both before & after the cut, making this saw as accurate as they come! The vise can also be positioned on either side of the blade making it versatile enough for any shop layout or any setup needing this special configuration. It comes with a heavy-duty one-piece stand, blade tension guide & flood coolant. Beautiful South Bend light gray & two-tone blue color scheme. 52.00 L. 30.00 W. 61.00 H.

A bi-metal bandsaw blade is made with a cobalt high speed steel tooth edge combined with a durable, spring steel backing material. This blade cuts faster and lasts longer than carbon steel blades. It can cut all types of woods, especially ideal for hard woods, i.e. oak, maple, walnut or cherry. It is also most commonly used for metalcutting, i.e. carbon steels, light alloy steels, mold steels and tool steels. There may be a number of other bandsaws or models that use the same blade lengths as the ones listed: 105 inch ( 8 ft. 9 inch, 8' 9" ) band saw blades suit the following models:Jet? JWBS-14DXPRO; General International? 90-200 M1 (woodworking 93-1/2? to 106-3/8?); Grizzly? G9743 ( 7? x 12? ),   8145Z (105-1/4? to 109-1/4?); Dake? SE912 (metalcutting); Most 14" bandbaws with Riser... Less

NEW Portable Variable Speed Bandsaw Condition: New Part Number: 47840 Variable-speed bandsaw goes with you to the job to cut tubing, pipes, rebar, wood, metal and plastic. Cuts at no-load speeds between 0 and 230 feet per minute, and weighs under 15 lbs. Needle-bearing-mou nted spindle and three wheel-bearing blade guides for even, exact cuts. Variable speed between 0 and 230 feet per minute Push-adjust blade tensioner lever for easy adjustments Capacity: 4-1/2" round or square stock Motor: 120 volts, 6 amps, 700 watts Blade size: 44-7/8" L x 1/2" W x 0.025" T x 14 TPI Output Watts: 700 Watts Rated Amps: 6 Amps Cord Length: 6.5 ft. Saw Type: Bandsaw Power Supply: Cord Voltage: 120

A bi-metal bandsaw blade is made with a cobalt high speed steel tooth edge combined with a durable, spring steel backing material. This blade cuts faster and lasts longer than carbon steel blades. It can cut all types of woods, especially ideal for hard woods, i.e. oak, maple, walnut or cherry. It is also most commonly used for metalcutting, i.e. carbon steels, light alloy steels, mold steels and tool steels. There may be a number of other bandsaws or models that use the same blade lengths as the ones listed: 105 inch ( 8 ft. 9 inch, 8' 9" ) band saw blades suit the following models:Jet? JWBS-14DXPRO; General International? 90-200 M1 (woodworking 93-1/2? to 106-3/8?); Grizzly? G9743 ( 7? x 12? ),   8145Z (105-1/4? to 109-1/4?); Dake? SE912 (metalcutting); Most 14" bandbaws with Riser... Less

A bi-metal bandsaw blade is made with a cobalt high speed steel tooth edge combined with a durable, spring steel backing material. This blade cuts faster and lasts longer than carbon steel blades. It can cut all types of woods, especially ideal for hard woods, i.e. oak, maple, walnut or cherry. It is also most commonly used for metalcutting, i.e. carbon steels, light alloy steels, mold steels and tool steels. There may be a number of other bandsaws or models that use the same blade lengths as the ones listed: 105 inch ( 8 ft. 9 inch, 8' 9" ) band saw blades suit the following models:Jet? JWBS-14DXPRO; General International? 90-200 M1 (woodworking 93-1/2? to 106-3/8?); Grizzly? G9743 ( 7? x 12? ),   8145Z (105-1/4? to 109-1/4?); Dake? SE912 (metalcutting); Most 14" bandbaws with Riser... Less

A bi-metal bandsaw blade is made with a cobalt high speed steel tooth edge combined with a durable, spring steel backing material. This blade cuts faster and lasts longer than carbon steel blades. It can cut all types of woods, especially ideal for hard woods, i.e. oak, maple, walnut or cherry. It is also most commonly used for metalcutting, i.e. carbon steels, light alloy steels, mold steels and tool steels. There may be a number of other bandsaws or models that use the same blade lengths as the ones listed: 105 inch ( 8 ft. 9 inch, 8' 9" ) band saw blades suit the following models:Jet? JWBS-14DXPRO; General International? 90-200 M1 (woodworking 93-1/2? to 106-3/8?); Grizzly? G9743 ( 7? x 12? ),   8145Z (105-1/4? to 109-1/4?); Dake? SE912 (metalcutting); Most 14" bandbaws with Riser... Less

105-Inch long 1/4-Inch wide 4 TPI Hook High carbon steel, Manufacturer: WOODSTOCK

A bi-metal bandsaw blade is made with a cobalt high speed steel tooth edge combined with a durable, spring steel backing material. This blade cuts faster and lasts longer than carbon steel blades. It can cut all types of woods, especially ideal for hard woods, i.e. oak, maple, walnut or cherry. It is also most commonly used for metalcutting, i.e. carbon steels, light alloy steels, mold steels and tool steels. There may be a number of other bandsaws or models that use the same blade lengths as the ones listed: 105 inch ( 8 ft. 9 inch, 8' 9" ) band saw blades suit the following models:Jet? JWBS-14DXPRO; General International? 90-200 M1 (woodworking 93-1/2? to 106-3/8?); Grizzly? G9743 ( 7? x 12? ),   8145Z (105-1/4? to 109-1/4?); Dake? SE912 (metalcutting); Most 14" bandbaws with Riser... Less

A bi-metal bandsaw blade is made with a cobalt high speed steel tooth edge combined with a durable, spring steel backing material. This blade cuts faster and lasts longer than carbon steel blades. It can cut all types of woods, especially ideal for hard woods, i.e. oak, maple, walnut or cherry. It is also most commonly used for metalcutting, i.e. carbon steels, light alloy steels, mold steels and tool steels. There may be a number of other bandsaws or models that use the same blade lengths as the ones listed: 105 inch ( 8 ft. 9 inch, 8' 9" ) band saw blades suit the following models:Jet? JWBS-14DXPRO; General International? 90-200 M1 (woodworking 93-1/2? to 106-3/8?); Grizzly? G9743 ( 7? x 12? ),   8145Z (105-1/4? to 109-1/4?); Dake? SE912 (metalcutting); Most 14" bandbaws with Riser... Less

A bi-metal bandsaw blade is made with a cobalt high speed steel tooth edge combined with a durable, spring steel backing material. This blade cuts faster and lasts longer than carbon steel blades. It can cut all types of woods, especially ideal for hard woods, i.e. oak, maple, walnut or cherry. It is also most commonly used for metalcutting, i.e. carbon steels, light alloy steels, mold steels and tool steels. There may be a number of other bandsaws or models that use the same blade lengths as the ones listed: 105 inch ( 8 ft. 9 inch, 8' 9" ) band saw blades suit the following models:Jet? JWBS-14DXPRO; General International? 90-200 M1 (woodworking 93-1/2? to 106-3/8?); Grizzly? G9743 ( 7? x 12? ),   8145Z (105-1/4? to 109-1/4?); Dake? SE912 (metalcutting); Most 14" bandbaws with Riser... Less

A bi-metal bandsaw blade is made with a cobalt high speed steel tooth edge combined with a durable, spring steel backing material. This blade cuts faster and lasts longer than carbon steel blades. It can cut all types of woods, especially ideal for hard woods, i.e. oak, maple, walnut or cherry. It is also most commonly used for metalcutting, i.e. carbon steels, light alloy steels, mold steels and tool steels. There may be a number of other bandsaws or models that use the same blade lengths as the ones listed: 105 inch ( 8 ft. 9 inch, 8' 9" ) band saw blades suit the following models:Jet? JWBS-14DXPRO; General International? 90-200 M1 (woodworking 93-1/2? to 106-3/8?); Grizzly? G9743 ( 7? x 12? ),   8145Z (105-1/4? to 109-1/4?); Dake? SE912 (metalcutting); Most 14" bandbaws with Riser... Less

A bi-metal bandsaw blade is made with a cobalt high speed steel tooth edge combined with a durable, spring steel backing material. This blade cuts faster and lasts longer than carbon steel blades. It can cut all types of woods, especially ideal for hard woods, i.e. oak, maple, walnut or cherry. It is also most commonly used for metalcutting, i.e. carbon steels, light alloy steels, mold steels and tool steels. There may be a number of other bandsaws or models that use the same blade lengths as the ones listed: 105 inch ( 8 ft. 9 inch, 8' 9" ) band saw blades suit the following models:Jet? JWBS-14DXPRO; General International? 90-200 M1 (woodworking 93-1/2? to 106-3/8?); Grizzly? G9743 ( 7? x 12? ),   8145Z (105-1/4? to 109-1/4?); Dake? SE912 (metalcutting); Most 14" bandbaws with Riser... Less

A bi-metal bandsaw blade is made with a cobalt high speed steel tooth edge combined with a durable, spring steel backing material. This blade cuts faster and lasts longer than carbon steel blades. It can cut all types of woods, especially ideal for hard woods, i.e. oak, maple, walnut or cherry. It is also most commonly used for metalcutting, i.e. carbon steels, light alloy steels, mold steels and tool steels. There may be a number of other bandsaws or models that use the same blade lengths as the ones listed: 105 inch ( 8 ft. 9 inch, 8' 9" ) band saw blades suit the following models:Jet? JWBS-14DXPRO; General International? 90-200 M1 (woodworking 93-1/2? to 106-3/8?); Grizzly? G9743 ( 7? x 12? ),   8145Z (105-1/4? to 109-1/4?); Dake? SE912 (metalcutting); Most 14" bandbaws with Riser... Less

Powermatic 1791217 Riser Block for 1791216K Bandsaw 1791217 6" riser block kit for Powematic 14" bandsaw Increase band saw capacity to 12 inches Easy to install Includes 105" blade, block, bolt, longer guards.

A bi-metal bandsaw blade is made with a cobalt high speed steel tooth edge combined with a durable, spring steel backing material. This blade cuts faster and lasts longer than carbon steel blades. It can cut all types of woods, especially ideal for hard woods, i.e. oak, maple, walnut or cherry. It is also most commonly used for metalcutting, i.e. carbon steels, light alloy steels, mold steels and tool steels. There may be a number of other bandsaws or models that use the same blade lengths as the ones listed: 105 inch ( 8 ft. 9 inch, 8' 9" ) band saw blades suit the following models:Jet? JWBS-14DXPRO; General International? 90-200 M1 (woodworking 93-1/2? to 106-3/8?); Grizzly? G9743 ( 7? x 12? ),   8145Z (105-1/4? to 109-1/4?); Dake? SE912 (metalcutting); Most 14" bandbaws with Riser... Less

A bi-metal bandsaw blade is made with a cobalt high speed steel tooth edge combined with a durable, spring steel backing material. This blade cuts faster and lasts longer than carbon steel blades. It can cut all types of woods, especially ideal for hard woods, i.e. oak, maple, walnut or cherry. It is also most commonly used for metalcutting, i.e. carbon steels, light alloy steels, mold steels and tool steels. There may be a number of other bandsaws or models that use the same blade lengths as the ones listed: 105 inch ( 8 ft. 9 inch, 8' 9" ) band saw blades suit the following models:Jet? JWBS-14DXPRO; General International? 90-200 M1 (woodworking 93-1/2? to 106-3/8?); Grizzly? G9743 ( 7? x 12? ),   8145Z (105-1/4? to 109-1/4?); Dake? SE912 (metalcutting); Most 14" bandbaws with Riser... Less

A bi-metal bandsaw blade is made with a cobalt high speed steel tooth edge combined with a durable, spring steel backing material. This blade cuts faster and lasts longer than carbon steel blades. It can cut all types of woods, especially ideal for hard woods, i.e. oak, maple, walnut or cherry. It is also most commonly used for metalcutting, i.e. carbon steels, light alloy steels, mold steels and tool steels. There may be a number of other bandsaws or models that use the same blade lengths as the ones listed: 105 inch ( 8 ft. 9 inch, 8' 9" ) band saw blades suit the following models:Jet? JWBS-14DXPRO; General International? 90-200 M1 (woodworking 93-1/2? to 106-3/8?); Grizzly? G9743 ( 7? x 12? ),   8145Z (105-1/4? to 109-1/4?); Dake? SE912 (metalcutting); Most 14" bandbaws with Riser... Less

A bi-metal bandsaw blade is made with a cobalt high speed steel tooth edge combined with a durable, spring steel backing material. This blade cuts faster and lasts longer than carbon steel blades. It can cut all types of woods, especially ideal for hard woods, i.e. oak, maple, walnut or cherry. It is also most commonly used for metalcutting, i.e. carbon steels, light alloy steels, mold steels and tool steels. There may be a number of other bandsaws or models that use the same blade lengths as the ones listed: 105 inch ( 8 ft. 9 inch, 8' 9" ) band saw blades suit the following models:Jet? JWBS-14DXPRO; General International? 90-200 M1 (woodworking 93-1/2? to 106-3/8?); Grizzly? G9743 ( 7? x 12? ),   8145Z (105-1/4? to 109-1/4?); Dake? SE912 (metalcutting); Most 14" bandbaws with Riser... Less

A bi-metal bandsaw blade is made with a cobalt high speed steel tooth edge combined with a durable, spring steel backing material. This blade cuts faster and lasts longer than carbon steel blades. It can cut all types of woods, especially ideal for hard woods, i.e. oak, maple, walnut or cherry. It is also most commonly used for metalcutting, i.e. carbon steels, light alloy steels, mold steels and tool steels. There may be a number of other bandsaws or models that use the same blade lengths as the ones listed: 105 inch ( 8 ft. 9 inch, 8' 9" ) band saw blades suit the following models:Jet? JWBS-14DXPRO; General International? 90-200 M1 (woodworking 93-1/2? to 106-3/8?); Grizzly? G9743 ( 7? x 12? ),   8145Z (105-1/4? to 109-1/4?); Dake? SE912 (metalcutting); Most 14" bandbaws with Riser... Less

A bi-metal bandsaw blade is made with a cobalt high speed steel tooth edge combined with a durable, spring steel backing material. This blade cuts faster and lasts longer than carbon steel blades. It can cut all types of woods, especially ideal for hard woods, i.e. oak, maple, walnut or cherry. It is also most commonly used for metalcutting, i.e. carbon steels, light alloy steels, mold steels and tool steels. There may be a number of other bandsaws or models that use the same blade lengths as the ones listed: 105 inch ( 8 ft. 9 inch, 8' 9" ) band saw blades suit the following models:Jet? JWBS-14DXPRO; General International? 90-200 M1 (woodworking 93-1/2? to 106-3/8?); Grizzly? G9743 ( 7? x 12? ),   8145Z (105-1/4? to 109-1/4?); Dake? SE912 (metalcutting); Most 14" bandbaws with Riser... Less

A bi-metal bandsaw blade is made with a cobalt high speed steel tooth edge combined with a durable, spring steel backing material. This blade cuts faster and lasts longer than carbon steel blades. It can cut all types of woods, especially ideal for hard woods, i.e. oak, maple, walnut or cherry. It is also most commonly used for metalcutting, i.e. carbon steels, light alloy steels, mold steels and tool steels. There may be a number of other bandsaws or models that use the same blade lengths as the ones listed: 105 inch ( 8 ft. 9 inch, 8' 9" ) band saw blades suit the following models:Jet? JWBS-14DXPRO; General International? 90-200 M1 (woodworking 93-1/2? to 106-3/8?); Grizzly? G9743 ( 7? x 12? ),   8145Z (105-1/4? to 109-1/4?); Dake? SE912 (metalcutting); Most 14" bandbaws with Riser... Less

105-Inch long 3/8-Inch wide 4 TPI Hook High carbon steel, Manufacturer: WOODSTOCK