Frequency Range: 5 GHz to 6 GHz. Impedance: 50 Ohm. Power Pass: 12 V DC/700 mA. APW-1000 is designed for extending the range of 5.8Ghz wireless radio devices. A perfect power booster for RF-Link s 5.8GHz wireless A/V sender and wireless CCD surveillance camera. It is waterproof and suitable for use in an outdoor environment. Transmit gain - 20 dB. Transmit power - 1 W. Dimensions: 8.0 x 7.8 x 2.75 .

etronicspro Store Pyle PTA1000 1000 Watts Professional Power Amplifiers * Two Channels A/B- Bridgeable * Inputs: Electronic Balanced; Barrier Strip , XLR,TRS 1/4''* Speaker Terminal: Speakons for Ch A, Ch B and Bridge; Binding post * Cooling Fan Two-speed DC fan, air Flow back to front * 110/220 Volt Switchable * 2x5 LED Indicator Red , DDT / Clipping; Yellow, signal; Green , power * Overload and Protection Indicator * Signal/Noise ratio: =102dB * Distortion: =1.0%* Frequency response: 20Hz-20 KHz

Dual 1000-Watt Mono Amplifier MFG Part #: XPE1700 UPC: 827000000000 Quantity /ea Dual 1000-Watt Mono Amplifier 240 watts RMS at 4 ohms 400 watts RMS at 2 ohms 1000 watts dynamic power 1000 watts dynamic power Low-level RCA type inputs Variable low-pass crossover 12dB variable bass boost PWM MOSFET power supply This Item is BRAND NEW, and comes with all Manufactures Warranties We ship only to the 48 Continental United States We cannot ship to P.O Boxes APO's, HI, AK, PR or GUAM. All Items ship w

Output power: 400W @ 4 ohms; 560W @ 2 ohms High continuous current output from robust toroidal transformer Switchable input peak limiter and selectable high pass filter (30Hz, 50Hz) to reduce distortion and protect Speakers Front mounted detented gain controls for easy access Bridge mono and parallel mode LEDs Fast Recovery design for lower distortion if clipping occurs Very rugged housing Active balanced inputs for low noise Signal level at -40, -20, -10, protect and clip LED indicators to monitor performance Ground Lift switch to prevent humming Selectable stereo, parallel & bridge mono amp modes Two ventilation variable speed Fans Speakon-type connectors and 5-way binding posts speaker outputs XLR & 1/4" TRS connectors for maximum input flexibility Requires... Less

CR 1000 Watt 1-Ohm Stable Mono-Block Amplifier w/Subsonic Filter " border="0"> Product: CR 1000 Watt 1-Ohm Stable Mono-Block Amplifier w/Subsonic Filter Brand: CR Condition: Brand New Factory Sealed with Full USA Warranty Sale Details: 1000W 1-Channel A/B Class Mono Amplifier 250W x 1-Ch @ 4-Ohms or 500W x 1-Ch @ 2-Ohms or 1000W x 1-Ch @ 1-Ohm Dynamic Music Watts Includes Remote Mountable Bass Control * SEPPA/B-Class P-Series Amplifier Design * Illuminated, Large New Design Crunch Logo * P. MOSFET Pulse Wave Modulated Power Supply For Instant Maxx Current Output * 1-Ohm Capable A/B Class Mono Block Amp * 4-Ch Amps Config to 3-Ch R & L & Sub Mode * Rugged MOSFET Audio Outputs * P-SeriesAmp Protection w/System Diagnostics LED's That Protects Against: * Current / Amperage Overload * Short... Less

New 1000 Watt Dual 10" Car Audio Subwoofers System w/Amplifier New Acoustic Audio 1000 Watt Dual 10" Loaded Subwoofer Box Enclosure with 1000 Watt 2-Channel Amplifier and Wiring Kit Dual 10" Loaded Subwoofer Enclosure: Power Handling Capabilities: 500 Watts RMS/1000 Watts Max Power Black Industrial Aviation Grade Carpet MDF Construction Quick Lock and Release Speaker Terminals Impedance: 4 Ohm Dimensions: (H x W x D): 22.5" x 16.25" x 11.75" High Performance 2-Channel Amplifier: 1000 Watts Max Output Power 250 Watts RMS x 2 Channels @ 4 Ohm Variable Bass Boost: 0-12dB @ 45 Hz Full MOSFET Circuitry Power/Protection LEDs Thermal/Short/Ove rload Protection Circuitry RCA Line Input High Level Input Adjustable Input Sensitivity (Gain) Selectable HP/FULL/LP Crossover Variable LP Crossover:... Less

The Orange Terror Bass 1000 Watt Bass Tube Amp Head is a hybrid amplifier with a Class D solid state power section and the same preamp as the all-tube AD200B UK bass amp.The Terror Bass 1000 is louder and has more headroom than the 500 watt Bass Terror. With the same great looks as the other Terror series guitar amps, and a rugged construction that will stand up to the road, bass players can now become a part of the famed Tiny Terror club.Note: The Bass Terror does not require rebiasing when replacing tubes.

New Crunch PowerZone Series P1000.1 1000 Watt Car Stereo Amplifier Brand New Crunch P1000.1 Amplifiers send a cleaner current to your car speakers, ensuring an overall higher sound quality. Is your car stereo system showing its full potential? Get cleaner sound and frequency in your cars stereo with Crunchs P1000.1 monoblock amplifier with 1000 watts maximum power. It features a wired remote bass level control and amp protection from DC offsets, short circuits and thermal overloads. Its built-in selectable crossover permits low frequency signals, delivering the best possible sound quality. Condition: Brand New Manufacturer: Crunch Model: P1000.1 PowerZone AB Monoblock Car Amplifier Total Peak Power Output: 1000 watts Peak Power Rating: 4 ohms: 250 watts x 1 channel 2 ohms: 500 watts x 1... Less

Product Features:1000w Peak, 4-channel Class D Power AmplifierRms Power Rating: 8 Ohms: 150 Watts X 4 Chan.4 Ohms: 250 Watts X 4 Chan.Bridged, 8 Ohms: 500 Watts X 2 Chan.Rackmount Design Allows You To Install The Amplifier In Any Standard Equipment Rack10/100 Ethernet Jack That Allows You To Control And Monitor The Amplifier's FunctionsMixer Section Allows You To Route An Input To Any And All OutputsEthernet Port Allows You To Store Up To 35 Dsp Presets And SubpresetsStepped And Calibrated Attenuator Knob For Each InputDc Voltage Control And Remote Power On/offBuilt-in Protection Circuitry Protects Against Overloads And OverheatingLow- z, 25v, 70v And 100v ModelsExtensive Dsp AvailableEasy And Intuitive User InterfacePower Switch Can Be Disabled By Software4-step Signal Level And Clip... Less

For sound engineers requiring high-level control capability, the Behringer NU1000DSP comes ready for action right out-of-the-box. The built-in DSP and 24-bit/96 kHz converters ensure the ultimate signal integrity with an extremely broad dynamic range. DSP functions include a sophisticated delay for delay-line loudspeakers, crossover, EQ (eight parametric, two dynamic), and dynamics processing with lockable security settings. A convenient front panel LCD display allows you to setup and make adjustments directly at the amplifier, without the need for a PC. All iNUKE DSP models can also be set up, controlled and monitored via the front panel USB connector.

For sound engineers requiring high-level control capability, the Behringer NU1000DSP comes ready for action right out-of-the-box. The built-in DSP and 24-bit/96 kHz converters ensure the ultimate signal integrity with an extremely broad dynamic range. DSP functions include a sophisticated delay for delay-line loudspeakers, crossover, EQ (eight parametric, two dynamic), and dynamics processing with lockable security settings. A convenient front panel LCD display allows you to setup and make adjustments directly at the amplifier, without the need for a PC. All iNUKE DSP models can also be set up, controlled and monitored via the front panel USB connector.

Changers Crossovers Equalizers Extended Warranty Head Units Marine Components Multimedia Systems Radar Detectors Satellite Radio RMS Power Rating: 4 ohms: 475 watts x 1 chan. 2 ohms: 750 watts x 1 chan. 1 ohm: 1000 watts x 1 chan. PWM (Pulse Width Modulated) MOSFET power supply MB QR-2 Wired remote bass level control included LED power (green) and protect (red) indicators Variable Bass Boost (0 to +10 dB bass boost at 45 Hz Mono channel operation Dual speaker terminals simplify the hookup of multiple speakers Preamp RCA outputs to daisy chain multiple amps 4-Way System Protection circuitry (DC, thermal, overload, and speaker short protection) Piano black gloss finish with illuminated logo Heavy duty aluminum alloy convection heatsink for superb heat dissipation Silver-plated RCA level... Less

Bridgeable 2-channel MOSFET PWM power supply 1000W max, 4 ohm RMS: 50W x 2 S/N ratio: 90 dB < 0.04% THD Freq resp: 15 kHz - 30 kHz Variable crossover Overload, thermal, short circuit & fuse protection RCA low-level inputs Diagnostic indicator LED Dim: 1.96"H x 10.03"W x 9.84"L

The PowerBass ASA Series of amplifiers offers a complete line up of 2 and 4 channel models plus our newest Class D Bass amplifiers.  Whet her you just need more power or you are looking to build an entire system the ASA Series has a model that is perfect for almost any application. The PowerBass Class D Bass amplifiers are super efficient and can provide all the power and more for gut wrenching, jaw rattling bass in your ride! These amplifiers include a host of features usually only found in more expensive models-variable sub sonic filter, 0-180 degree phase shift switch, variable Bass EQ and more! Each PowerBass Class D Bass amplifier comes complete with a wired remote Gain Controller that allows the driver to adjust the woofers output from the cockpit of the vehicle. The low profile... Less

SquareTrade AP6.0 ebay template NEW NITRO 4 CHANNEL 1000WATT CAR AUDIO AMP AMPLIFIER PICTURES ADDITIONAL PICTURES Description 1 Year Warranty~ Features 45 degree angled speaker and power supply connectors Adjustable input sensitivity 4 Channel Bridgeable amplifier Super high fidelity sound Circuit/Thermal/ Overload Protection with LED indicator Variable Los pass filter and High pass filter Built in full Crossover 3-way protection with LED 2-Ohm Stable (4-Ohm Bridged) Soft delayed remote turn-on

CR 1000 Watt 1-Ohm Stable Mono-Block Amplifier w/Subsonic Filter Manufacturer: CR PartNumber: P1000.1 UPC: 806576215066 Sale Details: Description | AboutUs | Payment | Shipping | Returns | Warranty Description 1000W 1-Channel A/B Class Mono Amplifier 250W x 1-Ch @ 4-Ohms or 500W x 1-Ch @ 2-Ohms or 1000W x 1-Ch @ 1-Ohm Dynamic Music Watts Includes Remote Mountable Bass Control * SEPPA/B-Class P-Series Amplifier Design * Illuminated, Large New Design Crunch Logo * P. MOSFET Pulse Wave Modulated P

Crossovers Equalizers Extended Warranty Head Units Marine Components RMS Power Rating: 4 ohms: 475 watts x 1 chan. 2 ohms: 750 watts x 1 chan. 1 ohms: 1000 watts x 1 chan. Max power output: 1000 watts Pulse Width Modulated (PWM) MOSFET power supply LED power (blue) and protect (red) indicators Wired HFR-3 remote bass level control included Variable Bass Boost (0 to +10 dB bass boost at 45 Hz) Blue illuminated Hifonics badge Soft start sound function Mono channel operation Preamp RCA outputs to daisy chain multiple amps 4-Way System Protection circuitry (thermal, overload, DC, and speaker short protection) Dual 12 gauge speaker terminals simplify hookup Heavy duty aluminum alloy vented heatsink for maximum heat dissipation Silver nickle-plated RCA level inputs

SOLD INDIVIDUALLY... 24 bit digital processor possibility of settings and adaptation to the room dynamics and dimensions 600 Watt Rms BASH¨ amplifier mated to a 13"(33cm) "W" cone the SW 1000 Be offers high level reproduction with a low roll-off at 18Hz and a sound pressure level achieving 119dB. Description 24 bit digital processor possibility of settings and adaptation to the room dynamics and dimensions 600 Watt Rms BASH® amplifier mated to a 13"(33cm) "W" cone the high end subwoofer SW 1000 Be offers high level reproduction with a low roll-off at 18Hz and a sound pressure level achieving 119dB. Technical specifications Type Active bass-reflex subwoofer. Standard finishes Basalt - Champagne - Slate Grey - Mahogany On demand finishes Other finishes subject to estimate Drivers 33cm... Less

2 New 500 Watt 10" Car Subs w/Box/Amplifier/W iring Kit New Acoustic Audio 1000W Dual 10" Loaded Subwoofer Box Enclosure with 1000W 2-Channel Amplifier and Wiring Kit Dual 10" Loaded Subwoofer Enclosure: Power Handling Capabilities: 500 Watts RMS/1000 Watts Max Power Black Industrial Aviation Grade Carpet MDF Construction Quick Lock and Release Speaker Terminals Impedance: 4 Ohm Dimensions: (H x W x D): 22.5" x 16.25" x 11.75" High Performance 2-Channel Amplifier: 1000 Watts Max Output Power 250 Watts RMS x 2 Channels @ 4 Ohm Variable Bass Boost: 0-12dB @ 45 Hz Full MOSFET Circuitry Power/Protection LEDs Thermal/Short/Ove rload Protection Circuitry RCA Line Input High Level Input Adjustable Input Sensitivity (Gain) Selectable HP/FULL/LP Crossover Variable LP Crossover: 50Hz-200Hz,... Less

Crossovers Equalizers Extended Warranty Head Units Marine Components Multimedia Systems Radar Detectors Gladiator Series Monoblock Class D Car Amplifier RMS Power Rating: 4 ohms: 475 watts x 1 chan. 2 ohms: 750 watts x 1 chan. 1 ohm: 1000 watts x 1 chan. Pulse Width Modulated MOSFET power supply Wired remote bass level control included LED power (green) and protect (red) indicators Soft start turn-on Mono channel operation 3-way protection circuitry (thermal, overload, and speaker short protection) Dual speaker terminals simplify the hookup of multiple speakers Heavy duty aluminum alloy heat-sink for extreme heat dissipation Nickel-plated RCA level inputs Nickel-plated screw terminals Variable low-pass filter (35-250 Hz, 24 dB/octave) Subsonic filter (24 dB at 15 Hz) Phase Shift: 0-180°... Less

Brand New Behringer iNuke NU1000DSP Ultra- Lightweight, High-Density 1000-Watt Power Amplifier with DSP Control and USB Interface Features Delivers 2 x 500 Watts into 2 Ohms; 2 x 300 Watts into 4 Ohms; 1000 Watts into 4 Ohms (bridge mode) and weighs less than 8 lbs / 3.5 kg Ultimate reliability through revolutionary cool-running High-Density Class-D technology with "near-zero" thermal buildup Ultra-efficient switch-mode power supply for noise-free audio, superior transient response and low power consumption High-performance DSP and 24-bit/96 kHz converters deliver ultimate signal integrity and extreme dynamic range DSP section features sophisticated delay, crossover (3 filter types, up to 48 dB/octave), EQ (8 parametric, 2 dynamic), dynamics processing and lockable... Less

New Optidrive 1300 W Mono Competi. 1 YEAR WARRANTY ~ Features 500 Watts RMS Power @ 4 Ohms 800 Watts RMS Power @ 2 Ohms 1000 Watts RMS Power @ 1.3 Ohms 1300 Watts Max Power @ 1.3 Ohms Mono Block Subwoofer Amplifier 1 Ohm Stable MOSFET Power Supply PWM (Pulse-Width-Modul ated) System Double Sided Epoxy PCB Circuit Board Gold Plated RCA Inputs Custom Terminal Block for Speaker Connections Thermal, Overload Short Protection Remote Bass Control Soft Turn On/Off THD @ 1Watt/4 Ohm: 0.1% S/N Ratio: 90dB Damping Factor @ 20Hz/4 Ohms: 400 Variable Low Pass Filter: 50Hz-150Hz, 24dB/Octave Variable Subsonic Filter: 15Hz-40Hz, 24dB/Octave Variable Bass Boost: 0 to +18dB Phase Shift Control: 0 to 180

Product Features:1000w Peak, 4-channel Class D Power AmplifierRms Power Rating: 8 Ohms: 150 Watts X 4 Chan.4 Ohms: 250 Watts X 4 Chan.Bridged, 8 Ohms: 500 Watts X 2 Chan.Integrated Protea Dsp Allows Graphic And/or Parametric Eq, High And Low Pass Filters, Time Delay, Etc.Rackmount Design Allows You To Install The Amplifier In Any Standard Equipment Rack10/100 Ethernet Jack That Allows You To Control And Monitor The Amplifier's FunctionsMixer Section Allows You To Route An Input To Any And All OutputsEthernet Port Allows You To Store Up To 35 Dsp Presets And SubpresetsStepped And Calibrated Attenuator Knob For Each InputDc Voltage Control And Remote Power On/offBuilt-in Protection Circuitry Protects Against Overloads And OverheatingLow- z, 25v, 70v And 100v ModelsExtensive Dsp... Less

Shop for Electrical at The Home Depot. This two-channel rack-mountable amp's got power ? 1000 watts! Each input takes RCA, XLR, or ï¿ in. phono. Control each channel with an illuminated knob. A clipping LED reminds you to turn it down if your signal is distorted. Use in stereo, mono, or bridge mode for maximum output. Connect your speakers using the two Speakon inputs, or use the shock-free banana plugs on the back. The heavy duty fan with aluminum heat sink and protection circuit guards your equipment for optimum performance.

PTA1000 1000 Watts Professional Power Amplifier Two Channels A/B- Bridgeable Inputs: Electronic Balanced; Barrier Strip , XLR,TRS 1/4''Speaker Terminal: Speakons for Ch A, Ch B and Bridge; Binding post Cooling Fan Two-speed DC fan, air Flow back to front 110/220 Volt Switchable 2x5 LED Indicator Red , DDT / Clipping; Yellow, signal; Green , power Overload and Protection Indicator Signal/Noise ratio: =102dB Distortion: =1.0%Frequency response: 20Hz-20 KHz ±0.5dB input impedance: balance 20Khz Inpu

The QSC GX7 1,000-watt power amplifier gives your speakers the power they need while giving you the efficiency and protective features you want for easy operation and peace of mind. The GX7 uses advanced components for both light weight and reliability. Its Guardrail protection allows delivery of peak power while preventing overloads. It's equipped with a crossover switch, so adding a subwoofer to your system is a snap. Optimized for 4- and 8-ohm speakers, this amp also fits perfectly into popular racks, and its lightweight design (well under 20 lbs.) makes the GX7 incredibly easy to transport.QSC GX7 700-watt Power Amplifier Features at a Glance:Power levels matched to the most popular speakers Optimized for maximum real-world headroom into 4 ohm and 8 ohm speaker systemsInputs: XLR,... Less

3000 WATTS CLASS D AMPLIFIER VCT3000D Features: 1000W x 1 Output at 4 Ohms 2000W x 1 Output at 2 Ohms 3000W x 1 Output at 1 Ohm 1 Ohm Stable MOSFET Power Supply Variable Subsonicfilter : 15 Hz-40 Hz Variable Low-Pass:50 Hz-150 Hz Variable Input Level (Gain) Control : 6V-200mV/2V-8V Variable Bass Boost: 0-18dB Thermal / Overload / Short Circuit Protection Soft Turn On/Off Power & Protection LED Indicator Low Level RCA Input:10K Ohms Line Level RCA Output Frequency Response : 15 Hz-150 Hz Signal to Noise Ratio: >95dB THD:0.1 % 2x50 Amp Maxi Type Fuse Slim Size Amplifier Design For Easy Installation Dimensions: 10.63''W x 1.78''H x 14.17''L Brand New

NEW LANZAR OPTI250X2 1000W 2 CH CAR AUDIO AMPLIFIER AMP 1000 WATT 2 CHANNEL NEW LANZAR OPTI250X2 1000W 2 CH CAR AUDIO AMPLIFIER AMP 1000 WATT 2 CHANNEL OPTI250X2: 250W x 2 RMS @ 4 Ohms 350W x 2 RMS @ 2 Ohms 500W x 2 Max @ 4 Ohms 1000W Max x 1 [Bridged] @ 4 Ohms Bass Boost Circuit Double Sided Epoxy PCB Circuit Board Gold Plated RCA Inputs line Outs for Left and Right Channels Soft Turn On/Off Minimum Speaker Impedance: 2 Ohms THD: 0.04% S/N Ratio: 100dB Channel Separation: 60dB Bridgeable at 4 Ohms Frequency Response: 10Hz - 35kHz Variable Low Pass Filter: 50Hz~120Hz, 24dB/Octave Power and Protection LED Indicators Variable Bass Boost: 0 to 18dB High Pass Filter Controls 2 Ohm Stereo Stable Input Sensitivity: 200mV ~ 8V

Crown Audio DSi-1000 2-Channel 500 Watt per Channel Cinema Amplifier - Power Cable - Owner's Manual - Crown Audio 3 Years Warranty.The Crown Audio DSi-1000 2-Channel Amplifier offers outstanding quality and performance in a rack-mountable steel design, ideal for cinema use. The amplifier has presets for industry- standard JBL loudspeaker systems, which are set up quickly and easily thanks to an intuitive backlit LCD. A USB connection allows you to connect to a computer to configure HiQnet System Architect software.Onboard digital signal processing includes crossovers, EQ filters, delay and output limiting. A rear-panel HD-15 connector provides connectivity between DSi amplifiers and the DSi-8M System Monitor. The switch-mode universal power supply gives the DSi-1000 terrific power... Less

RMS Power Rating (14.4V): 4 ohms: 580 watts x 1 chan. 2 ohms: 725 watts x 1 chan. 1 ohm: 1,000 watts x 1 chan. RMS Power Rating (12V): 4 ohms: 395 watts x 1 chan. 2 ohms: 525 watts x 1 chan. 1 ohm: 785 watts x 1 chan. MOSFET power supply Wired remote bass level control included LED power (green) and protect (red) indicators Variable Bass Boost (0 to +12 dB bass boost at 50 Hz) On/Off circuit delay Mono channel operation Preamp RCA outputs to daisy chain multiple amps 3-Way System Protection circuitry SMT Circuitry Composite double sided epoxy PCB RMS Power @ 1 ohm Get the wires you need to properly install and power your car amp. Complete 4 Gauge Amp Wiring Kit with RCA Interconnect Cables and Speaker Wire! StreetWires ZN1K-04 4 Gauge (AWG) ZN1 Series Single Amplifier Installation Kit for... Less