Explosion Proof High Pressure Exhaust Fan - 48" This High Pressure Exhaust Fan removes fumes, dust and smoke. Direct driven exhaust fan is ideal for mills, mines, foundries & factories. Fan blades are made of heavy duty one-piece cast aluminum to provide spark-free operation. Frame is made of heavy duty steel venturi that is completely arc welded with tubular supports. Exhaust fan features explosion proof ball bearing motor. Gray enamel finish. Three phase design. Horsepower rating based upon maximum speed/load.

HEAVY DUTY PANEL FANS 10" Diameter Panel Fan - Single Phase 120V Panel fans serve as an exhaust fan or fresh air intake for industrial environments. Panel fans can be mounted in a wall in either horizontal or vertical position. Glass-filled, high impact polypropylene fan blades are powered by a wash down, severe duty ball bearing motor. Sealed motor is Class F insulated and features automatic thermal protection for low maintenance. Motor is housed in die cast aluminum and offers a labyrinth seal between housing and impeller guard to keep out moisture. Fan supports absorb sound and vibration for low noise operation. Vacuum formed, heavy duty fiberglass frame features corrosion resistant wire guards on motor side for safety. UL507 certified for outdoor use. C-UL recognized. 3 Year... Less

Exhaust Fan, Corrosion Resistant, Medium Performance, Propeller Dia 10 In, Cfm @ 0.000-in Sp 882, @ 0.050-in Sp 820, @ 0.125-in Sp 740, Max Ambient Temp 140 F, Voltage 120, 60 Hz, 1 Phase, Full Load Amps 0.90, Bearing Type Sealed Ball, Motor Rpm 1725, Motor Type Permanent Split Capacitor, Motor Enclosure Totally Enclosed Air-over, Height 14 3/4 In, Width 14 3/4 In, Max. Depth 10 15/16 In, Sq. Opening Required 10 1/2 In, Intake Guard Material Steel, Speed Controller 3c954

EXHAUST FAN Guarded exhaust fans feature 120V, single-phase totally permanently lubricated motors with provisions for direct wiring, UL listed. These shutter mounted fans install on inside wall and eliminate the need for external framing and shutter. Quiet operation makes it ideal for commercial environments. Aluminum blades are enclosed in a sturdy steel spiral wire guard. Note: Rough-in hole size is 1/2 inch (+/- 5/16) larger than fan blade size. 1 year limited warranty. Click here to view instructions. Horsepower rating based upon maximum speed/load.

Exhaust/supply Fan, Direct Drive Reversible, Propeller Dia. (in.) 20, Exhaust/supply Cfm @ 0.000-in. Sp 3812/3675, Max. Ambient Temp. (f) 104, Speed 1, Voltage 115/230, 60 Hz, Phase 1, Operating Amps 4.0/2.9, Fan Rpm 1750, Motor Rpm 1750, Motor Hp 1/3, Bearing Type Ball, Motor Enclosure Totally Enclosed Air Over, Height (in.) 24, Width (in.) 24, Mounting Position Horizontal Or Vertical, Propeller Material Aluminum, Number Of Blades 3, Shaft Dia. (in.) 1/2, Includes Reversing Switch

Mynewfan is proud to offer Adda fans. Adda produces millions of fans a month for HP, Dell and other PC makers. We've been working with Adda for over 10 years . We have developed a high regard for this quality manufacturer of innovative products. This 175mm x 90mm fan (similar to the Comair Rotron "Tarzan" size), part number AK1782HB-AW is a 230V sleeve bearing airmover with leadwires. The specifications include; Voltage, 230V Voltage Range, +/- 10% Current, .23Amps Speed,3200 RPM at rated volta

CM Collection 10 Inch Single Inlet Backward Inclined 1/4 Horse Power High RPM Belt Driven Utility FanSingle inlet backward inclined utility belt fans provide substantial benefits for pressure flow, low power consumption, and low noise levels, ideal for commercial and industrial applications. These applications include either supply or exhaust service for ducted systems in schools, theaters, gymnasiums, manufacturing plants, hotels, office buildings, restaurant hoods, and many other general ventilation applications. Turbine performance minimizes unnecessary energy losses resulting in a system with high efficiency, while its design, manufacture and testing guarantee a long operating life with low maintenance. Available in a full range of sizes, the CM Series belt driven backward inclined... Less

Exhaust Fan, Corrosion Resistant, Medium Performance, Propeller Dia 10 In, Cfm @ 0.000-in Sp 882, @ 0.050-in Sp 820, @ 0.125-in Sp 740, Max Ambient Temp 140 F, Voltage 240, 60 Hz, 1 Phase, Full Load Amps 0.40, Bearing Type Sealed Ball, Motor Rpm 1725, Motor Type Permanent Split Capacitor, Motor Enclosure Totally Enclosed Air-over, Height 14 3/4 In, Width 14 3/4 In, Max. Depth 10 15/16 In, Sq. Opening Required 10 1/2 In, Intake Guard Material Steel, Speed Controller 3c954

PC case exhaust fan is an add-in cooling fan designed to fit in the PCI or ISA expansion slots of any computer. It is used to exhaust warm air out preventing problems due to overheating components. The exhaust fan inlet faces adjacent PCI or AGP cards and makes a great video card cooler for hot running 3D accelerator cards like the Voodoo TNT2 GeForce256 and others. A quiet running brushless DC motor coupled with a high efficiency blade design is capable of moving 36 CFM (cubic feet per minute) of air. Power is supplied to the fan using a standard LP4 (hard drive power connector) pass through plug.

10" 753 CFM Standoff Exterior FanFujioh was awarded the ISO-9001 certificate for their production systems, quality control, design and service. Its a mark of Fujioh s promise to deliver quality products to their customers and to constantly provide products that offer a better quality of life and peace of mind.This inline fan will take care of your exhaust needs. The galvanized steel housing with baked powder coat finish will ensure long lasting use from this unit. The blower includes a prewired electrical box to ensure easy installation. Features: Automatic reset thermal overload protectionPowered by an external rotor motorized mixed flow impellerThree- Year limited warrantyDimension s:Height: 11-3/4"Width: 20"

HEAVY DUTY PANEL FANS 10" Diameter High Output Panel Fan - Single Phase 240V Panel fans serve as an exhaust fan or fresh air intake for industrial environments. Panel fans can be mounted in a wall in either horizontal or vertical position. Glass-filled, high impact polypropylene fan blades are powered by a wash down, severe duty ball bearing motor. Sealed motor is Class F insulated and features automatic thermal protection for low maintenance. Motor is housed in die cast aluminum and offers a labyrinth seal between housing and impeller guard to keep out moisture. Fan supports absorb sound and vibration for low noise operation. Vacuum formed, heavy duty fiberglass frame features corrosion resistant wire guards on motor side for safety. UL507 certified for outdoor use. C-UL recognized... Less

CM Collection 10 Inch Single Inlet Backward Inclined 1/3 Horse Power High RPM Belt Driven Utility FanSingle inlet backward inclined utility belt fans provide substantial benefits for pressure flow, low power consumption, and low noise levels, ideal for commercial and industrial applications. These applications include either supply or exhaust service for ducted systems in schools, theaters, gymnasiums, manufacturing plants, hotels, office buildings, restaurant hoods, and many other general ventilation applications. Turbine performance minimizes unnecessary energy losses resulting in a system with high efficiency, while its design, manufacture and testing guarantee a long operating life with low maintenance. Available in a full range of sizes, the CM Series belt driven backward inclined... Less

Explosion Proof Wet Environment Duct Fan - 60" This Explosion Proof Fan features ball bearing pillow block construction designed for moving air with high moisture content. This exhaust fan is great for spray booths, ducts and industrial washing machines. Fan blades are made of non-sparking cast aluminum. Axial fans feature an explosion proof motor. Fan housing is made of heavy gauge steel with angle iron flanges welded on each end for superior strength. Sealed ball bearings feature external grease fittings. Bearings are located in the belt tube, removed from contaminated airstream. Belt tube interior is protected from contaminated air in duct by water slinger, dust cover and shaft seals. Angle flanges are pre-drilled with eight 7/16" diameter holes around the bolt circle for easy... Less

10" High-Output In-Line Duct Fan. Air flow is an essential component in any horticulture configuration. Can be used for filters, intake or exhaust. This durable and high quality 10" fan is powerful enough to air cool several lights connected by ducting. Also powerful enough to extract odor and heat from your room. Keep your growing environment in balance by ensuring you have proper ventilation. 120V high-output inline duct fans. Extra quite. Durable ceramic-coated steel housing. UL listed components. Thermally protected motor. Mounting hardware and 8' pre-wired 120v cord included.

Exhaust/supply Fan, Direct Drive Reversible, Propeller Dia. (in.) 24, Exhaust/supply Cfm @ 0.000-in. Sp 5125/4594, Max. Ambient Temp. (f) 104, Speed 1, Voltage 115/230, 60 Hz, Phase 1, Operating Amps 4.6/3.4, Fan Rpm 1140, Motor Rpm 1140, Motor Hp 1/2, Bearing Type Ball, Motor Enclosure Totally Enclosed Air Over, Height (in.) 28, Width (in.) 28, Mounting Position Horizontal Or Vertical, Propeller Material Aluminum, Number Of Blades 3, Shaft Dia. (in.) 1/2, Includes Reversing Switch

, Dimension D (in.) 12-1/4, Dimension C (in.) 3, Dimension B (in.) 7-1/2, Dimension A (in.) 16, Exhaust/supply Fan, Direct Drive Reversible, Propeller Dia. (in.) 12, Exhaust/supply Cfm @ 0.000-in. Sp 1472/1440, Max. Inlet Temp. (deg. F) 104, Max. Ambient Temp. (f) 104, 1 Speed, Voltage 115/230, 60 Hz, 1 Phase, Operating Amps 2.9/1.4, Fan Rpm 1750, Motor Rpm 1750, Motor Hp 1/4, Bearing Type Ball, Motor Enclosure Totally Enclosed Air Over, Motor Insulation Class B, Height (in.) 16, Width (in.) 16

VENTILATING EXHAUST FAN 10"/250MM 55W INLINE VENT FAN EXHAUST BOOSTER BLOWER COOL AIR This 10" Inline Exhaust Vent Fan: Works best with enclosed grow spaces as an air duct, the Growlush Ventilation fan provdies Super power ventilation for its size. Great for venting air into greenhouses and grow rooms. Will provide your plants with a consitant strong fresh airlfow which as we know is a requirement for growroom setups. This Inline Exhaust Duct Blower features power motor and an aerodynamically designed shape. Electronic cabinet cooling Clean room modules Heat exchangers Air filtration Air showers Pharmaceutical equipment Semiconductor industry What`s in Package 1 x 10" Exhaust Vent Fan Parameter Reference Range for Growing: Stage Light

Exhaust/supply Fan, Direct Drive Reversible, Propeller Dia. (in.) 16, Exhaust/supply Cfm @ 0.000-in. Sp 1922/1858, Max. Ambient Temp. (f) 104, Speed 1, Voltage 115/230, 60 Hz, Phase 1, Operating Amps 2.9/1.4, Fan Rpm 1750, Motor Rpm 1750, Motor Hp 1/4, Bearing Type Ball, Motor Enclosure Totally Enclosed Air Over, Height (in.) 20, Width (in.) 20, Mounting Position Horizontal Or Vertical, Propeller Material Aluminum, Number Of Blades 4, Shaft Dia. (in.) 1/2, Includes Reversing Switch

Thermaltake V3 Black Edition Value- Performance Mid Tower Gaming Chassis VL80001W2Z. Fully black-coated interior. High opening-ratio front mesh design to accelerate cool air intake. One included 120mm Blue LED rear exhaust fan with ability to upgrade to up to 4 fans. Massive expandability: 10 drive bays (4 x 5.25 ODD bays 1 front accessible 3.5 bay 4 internal 3.5 HDD bays 1 internal 2.5 SSD - Solid Disk Drive bay). Thermal-friendly bottom PSU mounting allows for efficient heat removal and isolation.

Nutone 768CHNT Decorative Fan 80 CFM 2.5 Sones 120 Volts 4" Round Duct Light Fixture Assembly is Plug-In and Removable White Opal Glass Shade Close Mount Design Uses Two 60 Watt Maximum, B10 Type, Candelabra Bulbs. Bulbs Not Included. Vent Openings In Fixture Base for Exhaust Fan Corrosion Resistant Plug-In Permanently Lubricated Motor 13-1/8" Diameter Base 8" X 8-1/4" X 5-3/4" High Housing 4" Round Duct Type IC Fits in 2" X 6" Ceiling Construction

Exhaust/supply Fan, Direct Drive Reversible, Propeller Dia. (in.) 18, Exhaust/supply Cfm @ 0.000-in. Sp 3280/3264, Max. Ambient Temp. (f) 104, Speed 1, Voltage 208-230/460, 60 Hz, Phase 3, Operating Amps 1.7-1.9/0.85, Fan Rpm 1750, Motor Rpm 1750, Motor Hp 1/3, Bearing Type Ball, Motor Enclosure Totally Enclosed Air Over, Height (in.) 22, Width (in.) 22, Mounting Position Horizontal Or Vertical, Propeller Material Aluminum, Number Of Blades 4, Shaft Dia. (in.) 1/2, Includes Reversing Switch

GED Collection 1/10 Horse Power 7.8 Sones Sidewall Direct Drive Propeller FanThese Soler & Palau GED wall propeller fans feature the maximum efficiency, low maintenance and durable, economical operation resulting from the direct drive design. It is available in exhaust configurations to provide general ventilation for a wide variety of buildings and enclosed areas within buildings. Examplesinclude factories, assembly plants, churches, gymnasiums, garages, jails, machine rooms and many others. They feature extremely quiet operation and an integral motor side guard as standard. Features:Length: 16"Width: 16"Depth: 11"16 Gauge Galvanized SteelOne Piece Spun Venturi for Maximum EfficiencyPropell er Attached Directly to Motor Shaft for Maximum EfficiencyPropell ers Precision Pitched Fabricated... Less

The Model 502 is an economy rear flanged vertical mount automatic exhaust shutter. It is designed to allow horizontal airflow in one direction and to prevent reverse airflow while providing protection from environmental elements when the airflow stops. The blades open with airflow and close by gravity when the fan shuts down. Ideal for direct-drive or belt-driven exhaust fans. Do not use with vane axial or tube axial fans. 14.00 L. 14.00 W. 2.75 H.

Exhaust/supply Fan, Direct Drive Reversible, Propeller Dia. (in.) 16, Exhaust/supply Cfm @ 0.000-in. Sp 1922/1858, Max. Ambient Temp. (f) 104, Speed 1, Voltage 208-230/460, 60 Hz, Phase 3, Operating Amps 1.5-1.6/.85, Fan Rpm 1750, Motor Rpm 1750, Motor Hp 1/4, Bearing Type Ball, Motor Enclosure Totally Enclosed Air Over, Height (in.) 20, Width (in.) 20, Mounting Position Horizontal Or Vertical, Propeller Material Aluminum, Number Of Blades 4, Shaft Dia. (in.) 1/2, Includes Reversing Switch

10" x 42" Carbon Pro Filter 10" HORTEK INLINE FAN 790 CFM INDUSTRIAL GRADE The Powder coated steel frame encloses a high performance radial impeller inline fan that has both attitude and performance. 10" Flange Powerful and Efficient Sound dampening cover Solid construction Black Powder coated solid steel case Permanently lubricated bearings Premium quality molded impeller Thermally protected motor Pre-Wired grounded 6' power cord Easy installation Mounting bracket included Specifications: Flange Size: 10" Voltage: 110V / 60Hz Power: 215W 790 CFM (Cubic Feet per Minute) Dimensions: 15"(L) x 13.25"(W) x 8.25"(H) Compatible with 10" Carbon Filter Magnum Pro 10" x 42" Activated Carbon Air Filter The result is a uniform carbon with a surface area of up to 2,000 square meters per gram! This... Less

GALLERY | DESCRIPTION | PAYMENT | SHIPPING | RETURN | CONTACT CATBACK EXHAUSTS HEADERS INTERCOOLERS TURBO KITS TURBOCHARGERS LOWERING SPRINGS COILOVERS SEE MORE ITEMS DUAL CORE FULL ALUMINUM COOLING RADIATOR+2 10"BLK FAN ITEM SKU: RA-CAMARO93-2+RAF- 10+FMK-X2 [ * ] PRODUCT DESCRIPTION Brand New High Performance Radiator. Aircraft Grade Aluminum. Increases Cooling By 35% and More.Properly Sealed Radiator Cap Included. Bolt-on Installation. Professional Installation is recommended! 100% Brand New,

RCX Collection 10" RCX Gravity Vent Exhaust and SupplyRelief and intake ventilators are used to exhaust (relief) or supply (intake) air from or to an enclosed area without the need for a power operated fan. They rely on a difference in static pressure inside and outside the area to create an air flow through the ventilator from the area of higher pressure to the area of lower pressure. If the enclosed area is under a negative pressure, air will flow into the enclosed area (intake). If the enclosed area has a positive pressure, air will flow from it to the outside. These units can also operate as gravity ventilators, allowing air to flow from an enclosed area using the “Stack Effect”. The amount of air flow will depend on the temperature difference inside and outside the area and the... Less

Exhaust/supply Fan, Direct Drive Reversible, Propeller Dia. (in.) 16, Exhaust/supply Cfm @ 0.000-in. Sp 2798/2591, Max. Ambient Temp. (f) 104, Speed 1, Voltage 208-230/460, 60 Hz, Phase 3, Operating Amps 1.7-1.9/0.85, Fan Rpm 1750, Motor Rpm 1750, Motor Hp 1/3, Bearing Type Ball, Motor Enclosure Totally Enclosed Air Over, Height (in.) 20, Width (in.) 20, Mounting Position Horizontal Or Vertical, Propeller Material Aluminum, Number Of Blades 4, Shaft Dia. (in.) 1/2, Includes Reversing Switch

10" 1008 CFM Flat Mount Exterior FanFujioh was awarded the ISO-9001 certificate for their production systems, quality control, design and service. Its a mark of Fujioh s promise to deliver quality products to their customers and to constantly provide products that offer a better quality of life and peace of mind.This inline fan will take care of your exhaust needs. The galvanized steel housing with baked powder coat finish will ensure long lasting use from this unit. The blower includes a prewired electrical box to ensure easy installation. Features:100% speed controllableAutom atic reset thermal overload protectionPowered by an external rotor motorized mixed flow impellerThree- Year limited warrantyDimension s:Height: 12-11/16"Width: 20"

All Stainless 10 Ft Grease Hood Package w Filters and Grease Cup Included