The Velocity(TM) S-Video Y-Cable is the perfect answer when the question is How do I get one S-Video signal to two devices easily and inexpensively? Low-loss dual 75-ohm oxygen-free copper wire and a foam dielectric guarantee the proper characteristic impedance. Individually double-shielded wires combined with an overall aluminum foil and OFC braid shield eliminate electromagnetic and radio-frequency interference. A dual coax design a properly manufactured S-Video cable transports the black-and-white picture detail information and the chrominance color information on separate pathways. This construction enables improved picture quality when compared with a typical composite cable. In addition to fitting standard 4-pin S-Video jacks the performance S-video cable fits most 7-pin jacks found... Less

N5COHM - 8Color - BlackThese 5 1/4" speakers are smooth yet detailed and very efficient. Being both waterproof and UV resistant these speakers would be great in almost any setting; on your boat, in-wall stereo/home theater or patio. As a stand alone full-range in cabinet works great in a 1/3 cu ft sealed box - will have depth, detail and highs all without a crossover and separate woofer and tweeters. These speakers are +/- 3 dB from 45 Hz to 19 kHz. The efficiency is at 91 dB so will play well with most decent amps or receivers with at least 25 watts RMS per channel. They are rated at 80 watts continuous and 300 watt peaks. A complete surround with a set of these will blow your mind. Specifications: QTY: PairWatts: 80w

8" coaxial driver with a 1" horn for quality full-range output Perfect for solid surface ceilings and drywalls Incredibly wide frequency response: 50 Hz to 20 kHz 8 ohm, 70V or 100V operation Power handling: 3.7W, 7.5W, 15W, 30W Sound pressure levels up to 91 dB Lightweight V-type steel brackets lock speakers into place Iron-molded circular construct with fire-proof coating Coaxial driver reduces size and ensures broad, even audio coverage Low profile construct with reduced back can for versatile installation Off-white finish The Phonic IW8030LP is a high fidelity 8 inch (diameter) in-ceiling loudspeakers with built-in transformer that offers a 'low profile' construct – making it ideal for installations which would normally be a tight fit. The IW8030LP offers a coaxial... Less

4in Stacked Surround Speaker, Silver. These 4-inch cube speakers swivel, so you can reflect the sound off the room's walls, as well as send it directly into the room. Each speaker consists of two stacked 4-inch cubes. Each cube contains one 3-inch high-pe

Brand New In Box PylePro 1.35" TITANIUM HORN DRIVER 8 OHM 1-3/8� X 18 TPI PDS341 Features: Midrange/Tweeter Compression Horn Driver Titanium Diaphragm 1.35'' (34.4mm) Flat Aluminum Voice Coil 12 oz Magnet Structure Frequency Response: 1kHz - 20kHz Sensitivity: 102dB @ 1W/1M 8 Ohm Impedance 200 Watts RMS/400 Watts Peak Terminals 250 Type Fits Horns with 1 3 /8'' x 18 TPI Threads Brand New

The Markbass Micromark bass combo is an amplifier that is less than 9" in any direction. Despite only a 6" speaker, the Micromark is a practice amp with deceptively loud volume and the kind of sound quality you'd expect from a B&C speaker with Markbass electronics. Pumping out 50W of power, the Micromark amp boasts a mini-plug for attaching your CD or MP3 players, to help you master your favorite licks. The Markbass Micromark amp has a Variable Pre-shape filter for boosting lows around 35Hz and highs around 10kHz, and cutting mids at 380Hzwhich is perfect for rockers and slap bassists alike. There's a volume control knob, headphone jack, XlR output for recording and live situations, a ground lift to eliminate hum, and a 1/4" jack tweeter out for the optional Markbass satellite tweeter.6"... Less

Power capacity: 50W (8 Ohm) Sensitivity: 90 dB SPL (@ 1W/1m) Frequency response: 120 Hz ~ 20 kHz / 75 Hz ~ 20 kHz 6 1/5" polycarbonate woofer and 1" soft dome tweeter Built-in 70.7 V transformer with 4 tap positions (2.5, 5, 10, 20W) and 8 ohm bypass Compact and light weight Moisture resistant Aluminum enclosure, available in both black and white U-mount bracket included Versatap Series are contractor- friendly Speakers. Each speaker is fitted with a 100V (70.7V available) line transformer, 4 power rating tap positions and an 8 ohms bypass position to allow for almost universal application in any PA system. Both the Versatap 30 and Versatap 50 are supplied with a U-mount bracket. The Versatap 50 can also be used with the (optional) RK15 Universal Swivel Mount, which allows for... Less

Reduce the flow of electricity in your project with this 5-pack of 10-ohm carbon-film resistors. 1/2-watt, 5% tolerance.

The Randall ISO12C speaker isolation cabinet is a revolutionary way for musicians and sound engineers to deliver the true tone of their instruments in a noiseless isolated environment. Randall's computer aided cabinet design has helped us capture a "neutral" guitar sound environment.

-Brand New In Box- Bass Knob Included! This is a Brand New in Box Precision Power S2000.1d. It is rated at 2000 Watts RMS x 1 @ 1 ohms and comes complete with Bass Knob and owners manual. This amp has a 1 year manufacture warranty. PPI Sedona S2000.1 Monoblock 1-Channel Class-D Amp RMS Power Rating: 1 ohms: 2000 watts x 1 chan. 2 ohms: 1300 watts x 1 chan. 4 ohms: 750 watts x 1 chan. PWM MOSFET power supply Variable Bass Boost (0, 6, 12 dB at 55 Hz) IDI Intelligent Distress Indicator for thermal, short, and impedance protection Dash mount remote gain control included Brushed aluminum finish Low pass and Subsonic crossover with active x-over function Turn on/off delay Single-channel monoblock operation Tri Mode capable High level inputs for connection from OEM speaker leads Heavy duty... Less