-Brand New In Box- Bass Knob Included! This is a Brand New in Box Precision Power S2000.1d. It is rated at 2000 Watts RMS x 1 @ 1 ohms and comes complete with Bass Knob and owners manual. This amp has a 1 year manufacture warranty. PPI Sedona S2000.1 Monoblock 1-Channel Class-D Amp RMS Power Rating: 1 ohms: 2000 watts x 1 chan. 2 ohms: 1300 watts x 1 chan. 4 ohms: 750 watts x 1 chan. PWM MOSFET power supply Variable Bass Boost (0, 6, 12 dB at 55 Hz) IDI Intelligent Distress Indicator for thermal, short, and impedance protection Dash mount remote gain control included Brushed aluminum finish Low pass and Subsonic crossover with active x-over function Turn on/off delay Single-channel monoblock operation Tri Mode capable High level inputs for connection from OEM speaker leads Heavy duty... Less

The Velocity(TM) S-Video Y-Cable is the perfect answer when the question is How do I get one S-Video signal to two devices easily and inexpensively? Low-loss dual 75-ohm oxygen-free copper wire and a foam dielectric guarantee the proper characteristic impedance. Individually double-shielded wires combined with an overall aluminum foil and OFC braid shield eliminate electromagnetic and radio-frequency interference. A dual coax design a properly manufactured S-Video cable transports the black-and-white picture detail information and the chrominance color information on separate pathways. This construction enables improved picture quality when compared with a typical composite cable. In addition to fitting standard 4-pin S-Video jacks the performance S-video cable fits most 7-pin jacks found... Less

Call us: 1-877-275-4434 - M-F 8:30-5:30 CST PRECISION POWER D1000/1 PPI CAR AUDIO SUB AMPLIFIER NEW SKU: D1000/1 Click On Images to Enlarge Specifications Description PRECISION POWER D1000/1 PPI CAR AUDIO SUB AMPLIFIER NEW SKU: D1000/1 New Page 1 Features ;-Amplifier Type: Mono -RMS Power @ 4 Ohms: 185W x 1 @ 4 ohms -THD at 4-Ohm RMS Power: 0.1% -Bridged RMS Power @ 4 Ohms: 495W x 1 @ 1 ohm -Speaker Level Inputs: yes -Preamp Outputs : yes -Built-In Crossovers: HP/LP -Bass Boost: 0-10 dB -Freque

Signal Generator, Arbitrary Waveform, Sine Wave Range (mhz) 1 Micronhz To 25 Mhz, Square Wave Range (mhz) 1 Micronhz To 25 Mhz, Other Waveform Range 1 Micronhz To 5 Mhz (triangle, Ramp),1 Mhz To 10 Mhz (pulse), Sine Wave Distortion Dc-20 Khz, -65 Dbc,20 Khz-100 Khz, -60 Dbc,100 Khz-5 Mhz, -45 Dbc,5 Mhz-25 Mhz, -30 Dbc, Sq. Wave Rise/fall Time (ns) Less Than 12 Ns (10 Percent To 90 Percent) At Full Amplitude Into 50 Ohms, Output Amplitude 10 Mv To 10 Vp-p Into 50 Ohms, Impedance (ohms) 50 Ohm

PPI Precision Power S850.1D 850 Watt Mono Block Car Amp PPI Precision Power S850.1D Sedona 850 Watt Class D Mono Block Car Audio Amplifier Specifications: Sedona Class D Mono Amplifier 850W x 1 @ 1 Ohm RMS 600W x 1 @ 2 Ohm RMS 350W x 1 @ 4 Ohm RMS Variable Low Crossovers: 40Hz - 220Hz Variable Subsonic Crossovers: 10Hz - 50Hz Variable Bass Boost: 0/6/12dB Input Sensitivity: 200mV - 5V THD: <0.5% Damping Factor: >200 Sensitivity: >85dB Power Fuse: 80 Amp Remote Gain Control Included Dimensions: 2.32" H x 9.45" W x 13.58" L Brushed Aluminum Finish Double Sided PCB and SMD Components Full MOSFET Design LPF and Subsonic Crossovers Number of Channels 1 - Mono RMS Power (4 ohms) 350 watts x 1 channel RMS Power (2 ohms) 600 watts x 1 channel RMS Power (1 ohm) 850 watts x 1 channel Total RMS... Less

The ABM-115 is a 300 watt 8 Ohm bass cabinet featuring a single Ashdown driver in a precision tuned plywood cabinet. The cabinet is constructed from high-grade birch ply with properly screwed and glued joints, protected by a tough, buffalo leather cloth covering and chromed metal corners. Special Ashdown-designed metal handles are used in favor of inferior flip handles which can rattle after years of use. Ashdown speakers are specially developed to achieve a superb balance of power, transparency and deep, controlled low end, without sacrificing any of the mid-band attack and high-end brightness that are so important in a modern bass sound.

General Features: Monoblock Class D Pdx Series Car AmplifierRms Power Rating:4 Ohms: 3,700 Watts X 1 Chan.2 Ohms: 6,100 Watts X 1 Chan.1 Ohm: 6,100 Watts X 1 Chan.0.5 Ohm: 10,000 Watts X 1 Chan.Protection Sensing Circuit For Maximum PowerPulse Width Modulated Mosfet Power SupplyWired Remote Bass Level Control IncludedLed Power (green) And Protect (red) IndicatorsVariabl e Bass Boost (0 To +12 Db Bass Boost At 50 Hz)Soft Start Turn-onMono Channel Operation3-way Protection Circuitry (thermal, Overload, And Speaker Short Protection)Dual Speaker Terminals Simplify The Hookup Of Multiple SpeakersHeavy Duty Aluminum Alloy Heat-sinkNickel- plated Rca Level InputsNickel- plated Screw TerminalsInput Sensitivity:Low Level: 125mv-5vVariable Low-pass Filter (35-250 Hz, 24 Db/octave) Variable Subsonic... Less

RMS Power Rating (14.4V): 4 ohms: 580 watts x 1 chan. 2 ohms: 725 watts x 1 chan. 1 ohm: 1,000 watts x 1 chan. RMS Power Rating (12V): 4 ohms: 395 watts x 1 chan. 2 ohms: 525 watts x 1 chan. 1 ohm: 785 watts x 1 chan. MOSFET power supply Wired remote bass level control included LED power (green) and protect (red) indicators Variable Bass Boost (0 to +12 dB bass boost at 50 Hz) On/Off circuit delay Mono channel operation Preamp RCA outputs to daisy chain multiple amps 3-Way System Protection circuitry SMT Circuitry Composite double sided epoxy PCB RMS Power @ 1 ohm Get the wires you need to properly install and power your car amp. Complete 4 Gauge Amp Wiring Kit with RCA Interconnect Cables and Speaker Wire! StreetWires ZN1K-04 4 Gauge (AWG) ZN1 Series Single Amplifier Installation Kit for... Less

-Brand New In Box- Remote Bass Knob Included! This is a Brand New in Box Precision Power S1300.1d. It is rated at 1300 Watts RMS x 1 @ 1 ohms and comes complete with Bass Knob and owners manual. This amp has a 1 year manufacture warranty. If you have any questions you are welcome to email me. I package, ship and supply tracking number within 1 day of purchase by UPS. (I only ship within continental US. Sorry No HI, AK or PR) Thanks PPI Sedona S1300.1 Monoblock 1-Channel Class-D Amp RMS Power Ra

The ABM 115 Compact is a 300W, 8-Ohm bass cabinet featuring a single 15" Ashdown BlueLine driver in a precision-tuned plywood cabinet.The cabinet is constructed from high-grade birch ply with properly screwed and glued joints, protected by a tough, buffalo- leather cloth covering and chromed metal corners. Special Ashdown-designed metal handles are used in favor of inferior flip handles which can rattle after years of use.Ashdown BlueLine speakers are specially developed to achieve a superb balance of power, transparency, and deep, controlled low end, without sacrificing any of the mid-band attack and high-end brightness that are so important in a modern bass sound.300W RMS power handling, 600W program15" Ashdown driverBirch-ply construction with tough, buffalo-leather cloth covering and... Less

Power Class Series Class D Monoblock Car Amplifier RMS Power Rating: 2 ohms: 1000 watts x 1 chan. 1 ohms: 1000 watts x 1 chan. Individually regulated preamp/crossover power supplies ensure signal purity Low ESR capacitance banks compensate power supply ripple currents Extra low current drive stage increases efficiency and sound clarity Large TO218 MOSFET Transistors Full signal path low noise/distortion circuitry topology Wired remote bass level control included LED power (green) and protect (red) indicators Variable Bass Boost (0 to +12 dB bass boost at 30-90 Hz) Monoblock operation Differential drives divide pre-amp and power-amp stages, eliminating ground looping RMS Power @ 2 ohms 1000 watts x 1 channel RMS Power @ 1 ohm Get the wires you need to properly install and power your car... Less

PPI Precision Power S1300.1D 1300 Watt Mono Block Amp This Listing is for: PPI Precision Power S1300.1D Sedona 1300 Watt Class D Mono Block Car Audio Amplifier Specifications: Sedona Class D Mono Amplifier 1300W x 1 @1 Ohm RMS 900W x 1 @ 2 Ohm RMS 520W x 1 @4 Ohm RMS Variable Low Crossovers: 40Hz - 220Hz Variable Subsonic Crossovers: 10Hz - 50Hz Variable Bass Boost: 0/6/12dB Input Sensitivity: 200mV - 5V THD: 0.5% Damping Factor: 200 Sensitivity: 85dB Power Fuse: 120 Amp Remote Gain Control Inc

-Brand New In Box- Remote Bass Knob Included! This is a Brand New in Box Precision Power S850.1d. It is rated at 850 Watts RMS x 1 @ 1 ohms and comes complete with Bass Knob and owners manual. This amp has a 1 year manufacture warranty. If you have any questions you are welcome to email me. I package, ship and supply tracking number within 1 day of purchase by UPS. (I only ship within continental US. Sorry No HI, AK or PR) Thanks PPI Sedona S850.1 Monoblock 1-Channel Class-D Amp RMS Power Ratin

PRECISION DISCOVERY KICKER KS525 SPEAKER ROCKFORD POD SKU: UTVA-R-KS-28-AMP Made from Durable Plastic UV Resistant Black Finish Sold as a (4 way) single pod Hole with rubber grommet for speaker wire Includes hardware needed to install with detailed instructions Fits 5 1/4" Speakers Mounting Diameter 4 1/2" Dimensions 46 1/4" W x 7 1/2" D x 4 3/4" H Adjustable Bracket slides from 49" to 58 1/2" Kicker KS525 Features: 5 1/4" Size 4 Ohm 45 Watts RMS, 135 Watts Peak Sensitivity 90dB Frequency Response 45 Hz-21 kHz Tweeter Size 1/2" Rockford PBR300X4 Features: 4 Channel Amp 75 Watts RMS x 4 @ 4-Ohms Frequency Response 20Hz - 20kHz +/-1dB Dimensions 1.53" x 4.25" x 6.75" Crossover Controls - Selectable 80Hz LP/AP/80Hz HP @ 12dB/Octave Signal Input - Hi-Level: Variable DC offset sensitivity or... Less

Signal Generator, Arbitrary Waveform, Sine Wave Range (mhz) 1 Micronhz To 25 Mhz, Square Wave Range (mhz) 1 Micronhz To 25 Mhz, Other Waveform Range 1 Micronhz To 5 Mhz (triangle, Ramp),1 Mhz To 10 Mhz (pulse), Sine Wave Distortion Dc-20 Khz, -65 Dbc,20 Khz-100 Khz, -60 Dbc,100 Khz-5 Mhz, -45 Dbc,5 Mhz-25 Mhz, -30 Dbc, Sq. Wave Rise/fall Time (ns) Less Than 12 Ns (10 Percent To 90 Percent) At Full Amplitude Into 50 Ohms, Output Amplitude 10 Mv To 10 Vp-p Into 50 Ohms, Impedance (ohms) 50 Ohm

Dayton Audio DNR Series "Audio Grade" resistors are used in Zobel networks and fixed L-Pad attenuator circuits for tweeters. Nickel-chromium elements, a high thermal conductivity ceramic core, and welded construction all contribute to their low-noise performance.

-Brand New In Box- -Black Ice Series Amplifier- This is a Brand New Precision Power Black Ice BK1300.1D Mono Block Amplifier. This amp is rated at 500 watts x 1 RMS at 4 ohms or 1300 watts x 1 peak. This amplifier is brand new in the box and carries a 1 year Warranty. 500 Watts x 1 ch @ 4 ohms 900 Watts x 1 ch @ 2 ohms 1300 Watts x 1 ch @ 1 ohms Black Acrylic Surface PWM MOSFET power supply Variable Bass Boost (0, 6, 12 dB at 55 Hz) SMT(Surface mount technology) Circuity Variable 12dB high, low, & subsonic filters Dash mount remote gain control included Balanced signal input Turn on/off delay Single-channel monoblock operation Heavy duty aluminum alloy heatsink Nickel-plated RCA level inputs Nickel-plated screw terminals Damping factor: >200 Variable 180° phase control Total harmonic... Less

The Q44 II power amp from Electro-Voice provides 2 x 450W @ 4 ohms or 2 x 650W @ 2 ohms. It's an excellent choice for small tops and utility loudspeakers, such as ZX1, SX Series, or EVID Series.Dynamic Headroom:Electro-V oice's philosophy is that tonal performance of live music counts most; therefore, Electro-Voice amps are designed for dynamic headroom, meaning that each and every EV ampincluding the Q44 IIhas at least 30% more output capability for short-term signals when compared to a long-term sine wave value. This additional headroom results in an amp that will, for example, allow for short term signal peaks of at least 780W when spec'd 600W. While dynamic headroom is audible when playing music through a sound system, another specification to observe is the increase in output power... Less

-Brand New In Box- This is a Brand New in Box Precision Power S580.5 5-Channel Amplifier. It is rated at 80 Watts RMS x 4 and 260 Watts RMS x 1 @ 2 ohms. It comes complete with owners manual. This amp has a 1 year warranty. PPI Sedona S580.5 5-Channel Class A/B Amp RMS Power Rating: 4 ohms: 55 watts x 4 chan. + 160 watts x 1 chan. 2 ohms: 80 watts x 4 chan. + 260 watts x 1 chan. Max power output: 1160 watts Pulse Width Modulated MOSFET power supply LED power (green) and protect (red) indicators Selectable bass boost (0, 6, 12 dB at 50 Hz) Soft Start Turn-on Tri-mode capable 5/4/3/2 Channel operation Speaker-level inputs with signal sensing for automatic turn-on IDI Intelligent Distress Indicator 3-Way System Protection circuitry (thermal, impedance, and speaker short protection) Heavy... Less

New Precision Power PC1000.1 1000W Power Class Series ClassD Monoblock Amplifier Precision Power PC1000.1 1000W RMS Power Class Series Class D Monoblock Amplifier Brand New, Factory Box, Not Refurbished Power Class Amplifier Amplifier Specifications Amplifier Class Class D Number of Channels 1 Channel/Monoblock RMS Power (4 ohms) RMS Power (2 ohms) 1000 watts x 1 channel RMS Power (1 ohm) 1000 watts x 1 channel Bridged RMS Power Total RMS Power Output 1000 watts Peak Power Output N/A Total Peak Power Output N/A Maximum Input Gauge Size 4 awg Minimum Impedance Unbridged 1 ohm Minimum Impedance Bridged THD at Rated RMS Power .02% Speaker Level Inputs Preamp Outputs Built-in Crossover Low-pass (LP) High-Pass Crossover Frequency Low-Pass Crossover Frequency 50 - 200 Hz Subsonic Filter 15 -... Less

Precision Power BK340.2 340W RMS, 2-Channel Class A/B Black Ice Series Car Amplifier Black Ice Series 2-Channel Class A/B Car Amplifier RMS Power Rating: 4 ohms: 110 watts x 2 chan. 2 ohms: 170 watts x 2 chan. Bridged, 4 ohms: 340 watts x 1 chan. Black Acrylic Surface PWM MOSFET power supply Variable Bass Boost (0, 6, 12 dB at 55 Hz) SMT(Surface mount technology) Circuity Brushed aluminum finish Balanced signal input Turn on/off delay 2/1-channel operation Heavy duty aluminum alloy heatsink efficient heat dissipation Nickel-plated RCA level inputs Nickel-plated screw terminals Damping factor: >200 Total harmonic distortion: 0.5% RMS Power @ 4 ohms 110 watts x 2 channels RMS Power @ 2 ohms 170 watts x 2 channels RMS Power @ 1 ohm N/A Bridged RMS Power 340 watts x 1 channel Peak Power... Less

-Brand New In Box- -Black Ice Amplifier- This is a Brand New Precision Power Black Ice BK340.4 4-channel Amplifier. It is rated at 55 watts x 4 or 340 watts peak. This amplifier is brand new in the box and carries a 1 year Warranty. Precision Power Sedona Series Coaxials Power Ratings: 55 watts x 4 @ 4 ohms 85 watts x 4 @ 2 ohms 170 watts x 2 @ 4 ohms Black Acrylic Surface PWM MOSFET power supply Variable Bass Boost (0, 6, 12 dB at 55 Hz) SMT(Surface mount technology) Circuity Variable 12dB high, low, & subsonic filters Dash mount remote gain control included Band-pass crossovers Brushed aluminum finish Balanced signal input Turn on/off delay Tri Mode capable Heavy duty aluminum alloy heatsink efficient heat dissipation Nickel-plated RCA level inputs Nickel-plated screw terminals Damping... Less

200W Max, Sedona Series 2-Channel Amplifier RMS Power Rating: 4 ohms: 70 watts x 2 chan. 2 ohms: 100 watts x 2 chan. Bridged, 4 ohms: 200 watts x 1 chan. MOSFET power supply Variable Bass Boost (0, 6, 12 dB at 50 Hz) IDI Intelligent Distress Indicator for thermal, short, and impedance protection Brushed aluminum finish Platinum 4 AWG power block Infinitely variable crossovers with multipliers (high/low/band) Turn on/off delay Tri Mode capable High and low inputs Variable high-pass filter (15-3800 Hz, 12 dB/octave) Variable low-pass filter (50-4000 Hz, 12 dB/octave) Subsonic Filter (35 Hz) Frequency response: 10-39,000 Hz Stereo separation: 55dB Signal-to-noise ratio: 98dB Damping factor: 252 Total harmonic distortion: 0.03% Input sensitivity: 0.2V-6V Fuse: 25A x 1 Dimensions: 9-1/2L x... Less

-Brand New In Box- -Black Ice Amplifier- This is a Brand New Precision Power Black Ice 2-Channel Amplifier. It is rated at 65 watts x 2 at 4 ohms or 210 watts peak into 1 channel at 4 ohms. This amplifier is brand new in the box and carries a 1 year Warranty. 65 watts x 2 @ 4 ohms 105 watts x 2 @ 2 ohms 210 watts x 1 @ 4 ohms Black Acrylic Surface PWM MOSFET power supply Variable Bass Boost (0, 6, 12 dB at 55 Hz) SMT(Surface mount technology) Circuity Variable 12dB high, low, & subsonic filters Dash mount remote gain control included Brushed aluminum finish Balanced signal input Turn on/off delay 2/1-channel operation Heavy duty aluminum alloy heatsink efficient heat dissipation Nickel-plated RCA level inputs Nickel-plated screw terminals Damping factor: >200 Total harmonic distortion:... Less

Power Class Series Class D Monoblock Car AmplifierRms Power Rating: 2 Ohms: 1000 Watts X 1 Chan.1 Ohms: 1000 Watts X 1 Chan. Individually Regulated Preamp/crossover Power Supplies Ensure Signal PurityLow Esr Capacitance Banks Compensate Power Supply Ripple CurrentsExtra Low Current Drive Stage Increases Efficiency And Sound ClarityLarge To218 Mosfet TransistorsFull Signal Path Low Noise/distortion Circuitry TopologyWired Remote Bass Level Control IncludedLed Power (green) And Protect (red) IndicatorsVariabl e Bass Boost (0 To +12 Db Bass Boost At 30-90 Hz)Monoblock OperationDifferen tial Drives Divide Pre-amp And Power-amp Stages, Eliminating Ground LoopingClose Tolerance Signal Path Components - 1% Resistors And 5% CapacitorsSequenc ed Delays Eliminate Residual Power-up/power-dow n... Less

Bourns 3682S-1-103 Precision Potentiometer Bourns Pn: 3682S-1-103 Precision Potentiometer 2 Digits 10K Ohm 2 Watts 3 Pins Some Shelf Wear This is a surplus part it is New but is either missing the box or is from a bulk package.FREE SHIPPING DISCLAIMER : In order to offer Free Shipping as well as faster delivery options eBay #039s technical requirements force us to select a carrier. We reserve the right to change carriers in order to get the best price and options (Applies to free shipping only

Sedona Series Monoblock Class A/b Car AmplifierRms Power Rating: 4 Ohms: 170 Watts X 1 Chan.2 Ohms: 270 Watts X 1 Chan.Pwm Mosfet Power SupplyVariable Bass Boost (0, 6, 12 Db At 50 Hz)Idi Intelligent Distress Indicator For Thermal, Short, And Impedance ProtectionDash Mount Remote Gain Control IncludedBrushed Aluminum FinishPlatinum 4 Awg Power BlockInfinitely Variable Crossovers With Multipliers (high/low/band) Turn On/off DelayTri Mode CapableHigh And Low InputsVariable Low-pass Filter (45-450 Hz, 12 Db/octave) Subsonic Filter (30 Hz)Frequency Response: 10-25,000 HzSignal-to-noise Ratio: 96dbDamping Factor: 278Total Harmonic Distortion: 0.03%Input Sensitivity: 0.2v-6vPhase Control: 180Fuse: 20a X 2 Dimensions: 13-1/3l X 9-1/2w X 2-1/3h8-gauge Power And Ground Wiring Is Required For... Less

Template By Froo! New Precision Power S550.1D 550W RMS Sedona Series Class D Monoblock Amplifier Precision Power S550.1D 550W RMS Sedona Series Class D Monoblock Amplifier Brand New, Factory Box, Not Refurbished Sedona Series Amplifier Amplifier Specifications Amplifier Class Class D Number of Channels 1 Channel/Monoblock RMS Power (4 ohms) 240 watts x 1 channel RMS Power (2 ohms) 400 watts x 1 channel RMS Power (1 ohm) 550 watts x 1 channel Bridged RMS Power Total RMS Power Output 550 watts Peak Power Output N/A Total Peak Power Output N/A Maximum Input Gauge Size 4 awg Minimum Impedance Unbridged 1 ohm Minimum Impedance Bridged THD at Rated RMS Power .05% Speaker Level Inputs Preamp Outputs Built-in Crossover High-Pass Crossover Frequency Low-Pass Crossover Frequency 40 - 220 Hz... Less

Power Class Series 2-channel Class A/b Car AmplifierRms Power Rating: 4 Ohms: 110 Watts X 2 Chan.2 Ohms: 180 Watts X 2 Chan.Bridged, 4 Ohms: 360 Watts X 1 Chan. Individually Regulated Preamp/crossover Power Supplies Ensure Signal PurityLow Esr Capacitance Banks Compensate Power Supply Ripple CurrentsExtra Low Current Drive Stage Increases Efficiency And Sound ClarityLarge To218 Mosfet TransistorsFull Signal Path Low Noise/distortion Circuitry TopologyWired Remote Bass Level Control IncludedLed Power (green) And Protect (red) IndicatorsVariabl e Bass Boost (0 To +12 Db Bass Boost At 30-90 Hz)2/1 Channel OperationDifferen tial Drives Divide Pre-amp And Power-amp Stages, Eliminating Ground LoopingClose Tolerance Signal Path Components - 1% Resistors And 5% CapacitorsSequenc ed Delays... Less

The passive Mackie C300z 2-Way Speaker is equipped with a 12" high-efficiency woofer and a 3" voice coil with a 1-3/4" titanium diaphragm compression driver. The C300z handles a massive 600W of peak power at 8 ohms, and has a 45Hz-20kHz frequency response for clear sound across the spectrum. The C300z speaker's EQ and crossover points are meticulously chosen so that beam-width patterns match in both drivers, delivering natural sound at all volume levels. The Mackie C300z is pole-mountable and flyable. With its trapezoidal shape the C300z speaker can also be used as a stage monitor. Precision Tuned by the Speaker Brains at EAWMackie's C Series passive loudspeakers represent Mackie's first lightweight passive speakers tuned exclusively by the EAW loudspeaker engineering teama team with more... Less