1 Inch Diameter Lag Bolts Home and Garden - Shopping.com

Category

Building Supplies
Showing results for "1 inch diameter lag bolts"
Results 1 - 40 of 1500+

1/4 x 1 Lag Shield Zinc...

$0.43
FMW Fasteners 1/4 x 1 Lag Shield Zinc Plated (Short)
+ $6.50 shipping
/14-x-1-lag-shield-zinc/QdHZVi-HNbY_rr3OatzgtA==/info
FMW Fasteners
IN_STOCK ( In stock )
Store not rated
1/4 x 1 Lag Shield Zinc Plated (Short) - This lag screw expansion shield is a die cast zinc alloy expansion shield for anchoring lag screws in a variety of base materials including concrete, concrete block, brick and mortar joints. Radial ribs provide additional holding power in softer material.
More

1/2 x 2 Lag Shield Zinc...

$1.41
FMW Fasteners 1/2 x 2 Lag Shield Zinc Plated (Short)
+ $6.50 shipping
/12-x-2-lag-shield-zinc/PPDElxaQ4cRfh_MjX4BWCA==/info
FMW Fasteners
IN_STOCK ( In stock )
Store not rated
1/2 x 2 Lag Shield Zinc Plated (Short) - This lag screw expansion shield is a die cast zinc alloy expansion shield for anchoring lag screws in a variety of base materials including concrete, concrete block, brick and mortar joints. Radial ribs provide additional holding power in softer material.
More

1/2 x 3 Lag Shield Zinc...

$1.87
FMW Fasteners 1/2 x 3 Lag Shield Zinc Plated (Long)
+ $6.50 shipping
/12-x-3-lag-shield-zinc/g-f13L6N5ZrOXQg00BYD5g==/info
FMW Fasteners
IN_STOCK ( In stock )
Store not rated
1/2 x 3 Lag Shield Zinc Plated (Long) - This lag screw expansion shield is a die cast zinc alloy expansion shield for anchoring lag screws in a variety of base materials including concrete, concrete block, brick and mortar joints. Radial ribs provide additional holding power in softer material.
More

Lag Bolts 3/8 X 1-1/2 Long...

$9.95
eBay Lag Bolts 3/8 X 1-1/2 Long Indented Hex Head Steel Zinc Plated Lot Of 17 5082
Free Shipping
/lag-bolts-38-x-112/cMC8PA_Q3Gkq-a9IGLUqEA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Tapping Screws Lag Bolts 3/8 x 1-1/2 Long Indented Hex Head Unslotted Type A Steel Zinc Lot of 17 #5082 FAQ’s Shipping Items will be shipped within 5 business days of RECEIPT OF PAYMENT. We typically use FedEx or USPS for all of our shipping and the cost will be a flat rate quoted for each item.  US & International Shipping For Shipping outside the US please contact us for shipping cost!!  Payment Payment is due immediately following the end of the auction. If payment is not made within 5 calendar days, you will be reported to eBay and the item will be relisted. Please contact us immediately if there is any reason why payment cannot be made within the 5 days. Payment by PayPal is preferred. Sales Tax New York State law requires us to collect 8.75% sales tax on all purchases mad e by New... Less
More

1/4 x 1 Hex Lag Screw Zinc...

$0.07
FMW Fasteners 1/4 x 1 Hex Lag Screw Zinc Plated
+ $6.50 shipping
/14-x-1-hex-lag-screw/vdrrIZYS1t0mkbRA-F2oAQ==/info
FMW Fasteners
IN_STOCK ( In stock )
Store not rated
1/4 x 1 Hex Lag Screw Zinc Plated - Hex Lag Screws are manufactured from low carbon steel to meet SAE J429 Grade 1. Lag screws longer than 12 inches will have a minimum thread length of 50% of the screw length up to a maximum of 8 inches. Zinc plated material will meet or exceed ASTM F1941. Hot-Dip Galvanized material will meet or exceed ASTM A153. Typical hardness is HRB 70-100. Tensile strength (not pull out) will meet a minimum of 60,000 psi.
More

1/2 x 2 Hex Lag Screw Zinc...

$0.51
FMW Fasteners 1/2 x 2 Hex Lag Screw Zinc Plated
+ $6.50 shipping
/12-x-2-hex-lag-screw/-9GKxe72_e2ZBZ3orq86nw==/info
FMW Fasteners
IN_STOCK ( In stock )
Store not rated
1/2 x 2 Hex Lag Screw Zinc Plated - Hex Lag Screws are manufactured from low carbon steel to meet SAE J429 Grade 1. Lag screws longer than 12 inches will have a minimum thread length of 50% of the screw length up to a maximum of 8 inches. Zinc plated material will meet or exceed ASTM F1941. Hot-Dip Galvanized material will meet or exceed ASTM A153. Typical hardness is HRB 70-100. Tensile strength (not pull out) will meet a minimum of 60,000 psi.
More

3/8 1 3/4 Lag Shield Zinc...

$0.89
FMW Fasteners 3/8 1 3/4 Lag Shield Zinc Plated (Short)
+ $6.50 shipping
/38-1-34-lag-shield-zinc/c3_7B0RMk0PUrK3diEdgEA==/info
FMW Fasteners
IN_STOCK ( In stock )
Store not rated
3/8 1 3/4 Lag Shield Zinc Plated (Short) - This lag screw expansion shield is a die cast zinc alloy expansion shield for anchoring lag screws in a variety of base materials including concrete, concrete block, brick and mortar joints. Radial ribs provide additional holding power in softer material.
More

5/16 1 1/4 Lag Shield Zinc...

$0.44
FMW Fasteners 5/16 1 1/4 Lag Shield Zinc Plated (Short)
+ $6.50 shipping
/516-1-14-lag-shield/EekFIaSQM5h-ZenGWmUxkw==/info
FMW Fasteners
IN_STOCK ( In stock )
Store not rated
5/16 1 1/4 Lag Shield Zinc Plated (Short) - This lag screw expansion shield is a die cast zinc alloy expansion shield for anchoring lag screws in a variety of base materials including concrete, concrete block, brick and mortar joints. Radial ribs provide additional holding power in softer material.
More

1/2 x 7 Hex Lag Screw Zinc...

$1.62
FMW Fasteners 1/2 x 7 Hex Lag Screw Zinc Plated
+ $6.50 shipping
/12-x-7-hex-lag-screw/61QITyvJuFOeJHgF5RCwOw==/info
FMW Fasteners
IN_STOCK ( In stock )
Store not rated
1/2 x 7 Hex Lag Screw Zinc Plated - Hex Lag Screws are manufactured from low carbon steel to meet SAE J429 Grade 1. Lag screws longer than 12 inches will have a minimum thread length of 50% of the screw length up to a maximum of 8 inches. Zinc plated material will meet or exceed ASTM F1941. Hot-Dip Galvanized material will meet or exceed ASTM A153. Typical hardness is HRB 70-100. Tensile strength (not pull out) will meet a minimum of 60,000 psi.
More

5/16 x 1 Hex Lag Screw Zinc...

$0.12
FMW Fasteners 5/16 x 1 Hex Lag Screw Zinc Plated
+ $6.50 shipping
/516-x-1-hex-lag-screw/9l3NaH1Zi-Hekc9-VfNGpA==/info
FMW Fasteners
IN_STOCK ( In stock )
Store not rated
5/16 x 1 Hex Lag Screw Zinc Plated - Hex Lag Screws are manufactured from low carbon steel to meet SAE J429 Grade 1. Lag screws longer than 12 inches will have a minimum thread length of 50% of the screw length up to a maximum of 8 inches. Zinc plated material will meet or exceed ASTM F1941. Hot-Dip Galvanized material will meet or exceed ASTM A153. Typical hardness is HRB 70-100. Tensile strength (not pull out) will meet a minimum of 60,000 psi.
More

1/2 x 14 Hex Lag Screw Zinc...

$4.29
FMW Fasteners 1/2 x 14 Hex Lag Screw Zinc Plated
+ $6.50 shipping
/12-x-14-hex-lag-screw/IcHb9Z-hwQ1rUXAJ8i9DMw==/info
FMW Fasteners
IN_STOCK ( In stock )
Store not rated
1/2 x 14 Hex Lag Screw Zinc Plated - Hex Lag Screws are manufactured from low carbon steel to meet SAE J429 Grade 1. Lag screws longer than 12 inches will have a minimum thread length of 50% of the screw length up to a maximum of 8 inches. Zinc plated material will meet or exceed ASTM F1941. Hot-Dip Galvanized material will meet or exceed ASTM A153. Typical hardness is HRB 70-100. Tensile strength (not pull out) will meet a minimum of 60,000 psi.
More

1/4 x 5 Hex Lag Screw Zinc...

$0.30
FMW Fasteners 1/4 x 5 Hex Lag Screw Zinc Plated
+ $6.50 shipping
/14-x-5-hex-lag-screw/J-y4BXs0IxcsRFNCRYmwwA==/info
FMW Fasteners
IN_STOCK ( In stock )
Store not rated
1/4 x 5 Hex Lag Screw Zinc Plated - Hex Lag Screws are manufactured from low carbon steel to meet SAE J429 Grade 1. Lag screws longer than 12 inches will have a minimum thread length of 50% of the screw length up to a maximum of 8 inches. Zinc plated material will meet or exceed ASTM F1941. Hot-Dip Galvanized material will meet or exceed ASTM A153. Typical hardness is HRB 70-100. Tensile strength (not pull out) will meet a minimum of 60,000 psi.
More

LeviInnovations Swivel Lag...

$21.99
Wayfair LeviInnovations Swivel Lag Bolt LEV005-1
+ $4.99 shipping
/leviinnovations-swivel/nibOx-GsU6pwS64M8tEIIA==/info
Wayfair
IN_STOCK ( In stock )
Store not rated
LeviInnovations LEV005-1 The Lag-Bolt Swivel enhances the comfort and use of hanging chair swings. It allows for 360 positioning and will not permit the chair swing to recoil. The Lag-Bolt Swivel is for wooden beams and the body of the swivel is manufactured from extruded and forged steel. Weight capacity is 600 lb. Now try one on your new hanging chair today! Features: -Allows for 360 positioning and will not permit the chair swing to recoil.-Can be applied to any type of hanging chair.-Extruded and forged steel.-Made in the USA.-Product Type: Hardware.-Color: Black.-Distressed: No.-Stand Material: -Stand Material Details: ..-Accessory Material: Metal -Accessory Material Details: ..-Hardware Material: Steel.-Chain Material: .-UV Resistant: Yes.-Mildew Resistant: Yes.-Rust Resistant:... Less
More

1/2 x 3 Hex Lag Screw Zinc...

$0.56
FMW Fasteners 1/2 x 3 Hex Lag Screw Zinc Plated
+ $6.50 shipping
/12-x-3-hex-lag-screw/KwmpUSXaBOzeI4Tnq49_ng==/info
FMW Fasteners
IN_STOCK ( In stock )
Store not rated
1/2 x 3 Hex Lag Screw Zinc Plated - Hex Lag Screws are manufactured from low carbon steel to meet SAE J429 Grade 1. Lag screws longer than 12 inches will have a minimum thread length of 50% of the screw length up to a maximum of 8 inches. Zinc plated material will meet or exceed ASTM F1941. Hot-Dip Galvanized material will meet or exceed ASTM A153. Typical hardness is HRB 70-100. Tensile strength (not pull out) will meet a minimum of 60,000 psi.
More

3/8 x 1 Hex Lag Screw Zinc...

$0.16
FMW Fasteners 3/8 x 1 Hex Lag Screw Zinc Plated
+ $6.50 shipping
/38-x-1-hex-lag-screw/PjNzkSlHDqhDCmbePIqQlA==/info
FMW Fasteners
IN_STOCK ( In stock )
Store not rated
3/8 x 1 Hex Lag Screw Zinc Plated - Hex Lag Screws are manufactured from low carbon steel to meet SAE J429 Grade 1. Lag screws longer than 12 inches will have a minimum thread length of 50% of the screw length up to a maximum of 8 inches. Zinc plated material will meet or exceed ASTM F1941. Hot-Dip Galvanized material will meet or exceed ASTM A153. Typical hardness is HRB 70-100. Tensile strength (not pull out) will meet a minimum of 60,000 psi.
More

Professional Lag Bolts 6-in X...

$11.70
eBay Professional Lag Bolts 6-in X 5/8-in Hex Head Lot Of 2 Hot Dipped Galvanized
Free Shipping
/professional-lag-bolts/IzkUaj0HmggHV8eFtGkGVA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Feedback From Buyer Date/time Quick shipping. Thanks c***********5 ( 426 ) 2017-04-20 12:11:07 Item arrived safely. Works Thanks! k*****n ( 234 ) 2017-04-20 06:55:12 WOW!! This seller was amazing!!! I'd love to do all my purchases with them!!!!! d*****n ( 114 ) 2017-04-18 23:19:21 Close Professional Lag Bolts 6-in x 5/8-in Hex Head Lot of 2 Hot Dipped Galvanized   Desc ription   Profess ional Lag Bolts 6-in x 5/8-in Hex Head Lot of 2 Hot Dipped Galvanized. Item Number: ja8984m. Color: Gray. Country of Manufacture: Unknown.     Clic k Photos for Larger Image           P rofessional Lag Bolts 6-in x 5/8-in Hex Head Lot of 2 Hot Dipped Galvanized Tested and Inspected By: david69 Tested ** inspected ** sealed and/or packaged for shipping as described and noted in this listing. Batch: 072313... Less
More

1/2 x 6 Hex Lag Screw Zinc...

$0.99
FMW Fasteners 1/2 x 6 Hex Lag Screw Zinc Plated
+ $6.50 shipping
/12-x-6-hex-lag-screw/WjCYM-ebyxaQl521BXMMDg==/info
FMW Fasteners
IN_STOCK ( In stock )
Store not rated
1/2 x 6 Hex Lag Screw Zinc Plated - Hex Lag Screws are manufactured from low carbon steel to meet SAE J429 Grade 1. Lag screws longer than 12 inches will have a minimum thread length of 50% of the screw length up to a maximum of 8 inches. Zinc plated material will meet or exceed ASTM F1941. Hot-Dip Galvanized material will meet or exceed ASTM A153. Typical hardness is HRB 70-100. Tensile strength (not pull out) will meet a minimum of 60,000 psi.
More

1/2 x 5 Hex Lag Screw Zinc...

$1.22
FMW Fasteners 1/2 x 5 Hex Lag Screw Zinc Plated
+ $6.50 shipping
/12-x-5-hex-lag-screw/rLrJFlvaz1oDkk79wYcrvg==/info
FMW Fasteners
IN_STOCK ( In stock )
Store not rated
1/2 x 5 Hex Lag Screw Zinc Plated - Hex Lag Screws are manufactured from low carbon steel to meet SAE J429 Grade 1. Lag screws longer than 12 inches will have a minimum thread length of 50% of the screw length up to a maximum of 8 inches. Zinc plated material will meet or exceed ASTM F1941. Hot-Dip Galvanized material will meet or exceed ASTM A153. Typical hardness is HRB 70-100. Tensile strength (not pull out) will meet a minimum of 60,000 psi.
More

3/8 x 2 1/2 Lag Shield Zinc...

$1.17
FMW Fasteners 3/8 x 2 1/2 Lag Shield Zinc Plated (Long)
+ $6.50 shipping
/38-x-2-12-lag-shield/v4RLOe7gukj-3oazIH9dNw==/info
FMW Fasteners
IN_STOCK ( In stock )
Store not rated
3/8 x 2 1/2 Lag Shield Zinc Plated (Long) - This lag screw expansion shield is a die cast zinc alloy expansion shield for anchoring lag screws in a variety of base materials including concrete, concrete block, brick and mortar joints. Radial ribs provide additional holding power in softer material.
More

1/2 x 8 Hex Lag Screw Zinc...

$1.84
FMW Fasteners 1/2 x 8 Hex Lag Screw Zinc Plated
+ $6.50 shipping
/12-x-8-hex-lag-screw/xgkpKep7uX9OuTrUCLAiWQ==/info
FMW Fasteners
IN_STOCK ( In stock )
Store not rated
1/2 x 8 Hex Lag Screw Zinc Plated - Hex Lag Screws are manufactured from low carbon steel to meet SAE J429 Grade 1. Lag screws longer than 12 inches will have a minimum thread length of 50% of the screw length up to a maximum of 8 inches. Zinc plated material will meet or exceed ASTM F1941. Hot-Dip Galvanized material will meet or exceed ASTM A153. Typical hardness is HRB 70-100. Tensile strength (not pull out) will meet a minimum of 60,000 psi.
More

5/16 x 1 3/4 Lag Shield Zinc...

$0.57
FMW Fasteners 5/16 x 1 3/4 Lag Shield Zinc Plated (Long)
+ $6.50 shipping
/516-x-1-34-lag-shield/zURNoUmVLZHMqguOSgAiZA==/info
FMW Fasteners
IN_STOCK ( In stock )
Store not rated
5/16 x 1 3/4 Lag Shield Zinc Plated (Long) - This lag screw expansion shield is a die cast zinc alloy expansion shield for anchoring lag screws in a variety of base materials including concrete, concrete block, brick and mortar joints. Radial ribs provide additional holding power in softer material.
More

HEX HEAD LAG BOLTS

$39.82
Walmart.com HEX HEAD LAG BOLTS
+ $7.78 shipping
/hex-head-lag-bolts/h6w5RDlcrFReNYWsAa2LOw==/info
Walmart.com
IN_STOCK ( In stock )
Hot Galvanized Hex Head Lag Bolts, 1/2 x 4 @25Size: 1/2 x 4 L Material: Hot GalvanizedBox: 25
More

5/8 x 2 Lag Shield Zinc...

$2.30
FMW Fasteners 5/8 x 2 Lag Shield Zinc Plated (Short)
+ $6.50 shipping
/58-x-2-lag-shield-zinc/7epmiHbGfynBvlovnWpA6g==/info
FMW Fasteners
IN_STOCK ( In stock )
Store not rated
5/8 x 2 Lag Shield Zinc Plated (Short) - This lag screw expansion shield is a die cast zinc alloy expansion shield for anchoring lag screws in a variety of base materials including concrete, concrete block, brick and mortar joints. Radial ribs provide additional holding power in softer material.
More

Stanley V8414 Lag Eye Bolts...

$9.75
eBay Stanley V8414 Lag Eye Bolts 3/8 X 8 Long Steel Lot Of 2 5421
Free Shipping
/stanley-v8414-lag-eye/mJv5efvSTmzjniNhf7BS0w==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Stanley V8414 Lag Eye Bolts 3/8 x 8 Long Steel Lot of 2 #5421 FAQ’s Shipping Items will be shipped within 5 business days of RECEIPT OF PAYMENT. We typically use FedEx or USPS for all of our shipping and the cost will be a flat rate quoted for each item. US & International Shipping For Shipping outside the US please contact us for shipping cost!!  Payment Payment is due immediately following the end of the auction. If payment is not made within 5 calendar days, you will be reported to eBay and the item will be relisted. Please contact us immediately if there is any reason why payment cannot be made within the 5 days. Payment by PayPal is preferred. Sales Tax New York State law requires us to collect 8.75% sales tax on all purchases mad e by New York State Residents only. This is... Less
More

1/4 x 3 1/2 Hex Lag Screw...

$0.17
FMW Fasteners 1/4 x 3 1/2 Hex Lag Screw Zinc Plated
+ $6.50 shipping
/14-x-3-12-hex-lag-screw/4VcQt6yS1R21U5n-9d9DNg==/info
FMW Fasteners
IN_STOCK ( In stock )
Store not rated
1/4 x 3 1/2 Hex Lag Screw Zinc Plated - Hex Lag Screws are manufactured from low carbon steel to meet SAE J429 Grade 1. Lag screws longer than 12 inches will have a minimum thread length of 50% of the screw length up to a maximum of 8 inches. Zinc plated material will meet or exceed ASTM F1941. Hot-Dip Galvanized material will meet or exceed ASTM A153. Typical hardness is HRB 70-100. Tensile strength (not pull out) will meet a minimum of 60,000 psi.
More

1/4 x 4 1/2 Hex Lag Screw...

$0.27
FMW Fasteners 1/4 x 4 1/2 Hex Lag Screw Zinc Plated
+ $6.50 shipping
/14-x-4-12-hex-lag-screw/4ZKWS3jPu_jxYTcmf-nkWA==/info
FMW Fasteners
IN_STOCK ( In stock )
Store not rated
1/4 x 4 1/2 Hex Lag Screw Zinc Plated - Hex Lag Screws are manufactured from low carbon steel to meet SAE J429 Grade 1. Lag screws longer than 12 inches will have a minimum thread length of 50% of the screw length up to a maximum of 8 inches. Zinc plated material will meet or exceed ASTM F1941. Hot-Dip Galvanized material will meet or exceed ASTM A153. Typical hardness is HRB 70-100. Tensile strength (not pull out) will meet a minimum of 60,000 psi.
More

1/4 X 5 Square Head Lag Bolts...

$21.65
eBay 1/4 X 5 Square Head Lag Bolts Plain Steel Screws - Lot Of 25 Pcs.
+ $6.40 shipping
/14-x-5-square-head-lag/jLolAvntSJlyExf0MmMTzg==/info
eBay
IN_STOCK ( In stock )
1/4 x 5 Square Head Lag Bolts Plain Steel Screws-Lot of 25 pcs. Plain Finish Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application
More

1/2 x 1 1/2 Hex Lag Screw...

$0.49
FMW Fasteners 1/2 x 1 1/2 Hex Lag Screw Zinc Plated
+ $6.50 shipping
/12-x-1-12-hex-lag-screw/9sPJxa-m5JJBn6aD5CalXw==/info
FMW Fasteners
IN_STOCK ( In stock )
Store not rated
1/2 x 1 1/2 Hex Lag Screw Zinc Plated - Hex Lag Screws are manufactured from low carbon steel to meet SAE J429 Grade 1. Lag screws longer than 12 inches will have a minimum thread length of 50% of the screw length up to a maximum of 8 inches. Zinc plated material will meet or exceed ASTM F1941. Hot-Dip Galvanized material will meet or exceed ASTM A153. Typical hardness is HRB 70-100. Tensile strength (not pull out) will meet a minimum of 60,000 psi.
More

1/2 x 3 1/2 Hex Lag Screw...

$0.89
FMW Fasteners 1/2 x 3 1/2 Hex Lag Screw Zinc Plated
+ $6.50 shipping
/12-x-3-12-hex-lag-screw/IF9y1qK6dmoCcbF31m6Q4A==/info
FMW Fasteners
IN_STOCK ( In stock )
Store not rated
1/2 x 3 1/2 Hex Lag Screw Zinc Plated - Hex Lag Screws are manufactured from low carbon steel to meet SAE J429 Grade 1. Lag screws longer than 12 inches will have a minimum thread length of 50% of the screw length up to a maximum of 8 inches. Zinc plated material will meet or exceed ASTM F1941. Hot-Dip Galvanized material will meet or exceed ASTM A153. Typical hardness is HRB 70-100. Tensile strength (not pull out) will meet a minimum of 60,000 psi.
More

1/4 x 1 1/4 Hex Lag Screw Hot...

$0.10
FMW Fasteners 1/4 x 1 1/4 Hex Lag Screw Hot Dipped Galvanized
+ $6.50 shipping
/14-x-1-14-hex-lag-screw/RVe1nGmPzLJmdlccasPKMQ==/info
FMW Fasteners
IN_STOCK ( In stock )
Store not rated
1/4 x 1 1/4 Hex Lag Screw Hot Dipped Galvanized - Hex Lag Screws are manufactured from low carbon steel to meet SAE J429 Grade 1. Lag screws longer than 12 inches will have a minimum thread length of 50% of the screw length up to a maximum of 8 inches. Zinc plated material will meet or exceed ASTM F1941. Hot-Dip Galvanized material will meet or exceed ASTM A153. Typical hardness is HRB 70-100. Tensile strength (not pull out) will meet a minimum of 60,000 psi.
More

1/2 x 5 1/2 Hex Lag Screw...

$1.28
FMW Fasteners 1/2 x 5 1/2 Hex Lag Screw Zinc Plated
+ $6.50 shipping
/12-x-5-12-hex-lag-screw/VcMMkdzjitcObz3v4zcV1A==/info
FMW Fasteners
IN_STOCK ( In stock )
Store not rated
1/2 x 5 1/2 Hex Lag Screw Zinc Plated - Hex Lag Screws are manufactured from low carbon steel to meet SAE J429 Grade 1. Lag screws longer than 12 inches will have a minimum thread length of 50% of the screw length up to a maximum of 8 inches. Zinc plated material will meet or exceed ASTM F1941. Hot-Dip Galvanized material will meet or exceed ASTM A153. Typical hardness is HRB 70-100. Tensile strength (not pull out) will meet a minimum of 60,000 psi.
More

1/4 x 2 1/2 Hex Lag Screw...

$0.12
FMW Fasteners 1/4 x 2 1/2 Hex Lag Screw Zinc Plated
+ $6.50 shipping
/14-x-2-12-hex-lag-screw/VucP31ddorzzzLxJRPekZw==/info
FMW Fasteners
IN_STOCK ( In stock )
Store not rated
1/4 x 2 1/2 Hex Lag Screw Zinc Plated - Hex Lag Screws are manufactured from low carbon steel to meet SAE J429 Grade 1. Lag screws longer than 12 inches will have a minimum thread length of 50% of the screw length up to a maximum of 8 inches. Zinc plated material will meet or exceed ASTM F1941. Hot-Dip Galvanized material will meet or exceed ASTM A153. Typical hardness is HRB 70-100. Tensile strength (not pull out) will meet a minimum of 60,000 psi.
More

1/4 x 1 3/4 Hex Lag Screw...

$0.13
FMW Fasteners 1/4 x 1 3/4 Hex Lag Screw Zinc Plated
+ $6.50 shipping
/14-x-1-34-hex-lag-screw/Y3M8HgSWkr5yVJw_FuKtFg==/info
FMW Fasteners
IN_STOCK ( In stock )
Store not rated
1/4 x 1 3/4 Hex Lag Screw Zinc Plated - Hex Lag Screws are manufactured from low carbon steel to meet SAE J429 Grade 1. Lag screws longer than 12 inches will have a minimum thread length of 50% of the screw length up to a maximum of 8 inches. Zinc plated material will meet or exceed ASTM F1941. Hot-Dip Galvanized material will meet or exceed ASTM A153. Typical hardness is HRB 70-100. Tensile strength (not pull out) will meet a minimum of 60,000 psi.
More

1/2 x 1 3/4 Hex Lag Screw...

$0.51
FMW Fasteners 1/2 x 1 3/4 Hex Lag Screw Zinc Plated
+ $6.50 shipping
/12-x-1-34-hex-lag-screw/i7mqEDvBsuWl_8eqUvWqgA==/info
FMW Fasteners
IN_STOCK ( In stock )
Store not rated
1/2 x 1 3/4 Hex Lag Screw Zinc Plated - Hex Lag Screws are manufactured from low carbon steel to meet SAE J429 Grade 1. Lag screws longer than 12 inches will have a minimum thread length of 50% of the screw length up to a maximum of 8 inches. Zinc plated material will meet or exceed ASTM F1941. Hot-Dip Galvanized material will meet or exceed ASTM A153. Typical hardness is HRB 70-100. Tensile strength (not pull out) will meet a minimum of 60,000 psi.
More

1/4 x 1 1/4 Hex Lag Screw...

$0.07
FMW Fasteners 1/4 x 1 1/4 Hex Lag Screw Zinc Plated
+ $6.50 shipping
/14-x-1-14-hex-lag-screw/lM2bsFJXth4uLMZ8iJEtNw==/info
FMW Fasteners
IN_STOCK ( In stock )
Store not rated
1/4 x 1 1/4 Hex Lag Screw Zinc Plated - Hex Lag Screws are manufactured from low carbon steel to meet SAE J429 Grade 1. Lag screws longer than 12 inches will have a minimum thread length of 50% of the screw length up to a maximum of 8 inches. Zinc plated material will meet or exceed ASTM F1941. Hot-Dip Galvanized material will meet or exceed ASTM A153. Typical hardness is HRB 70-100. Tensile strength (not pull out) will meet a minimum of 60,000 psi.
More

1/2 x 6 Hex Lag Screw Hot...

$1.22
FMW Fasteners 1/2 x 6 Hex Lag Screw Hot Dipped Galvanized
+ $6.50 shipping
/12-x-6-hex-lag-screw-hot/05gYkmNZ02Sa4M0mjsJUpg==/info
FMW Fasteners
IN_STOCK ( In stock )
Store not rated
1/2 x 6 Hex Lag Screw Hot Dipped Galvanized - Hex Lag Screws are manufactured from low carbon steel to meet SAE J429 Grade 1. Lag screws longer than 12 inches will have a minimum thread length of 50% of the screw length up to a maximum of 8 inches. Zinc plated material will meet or exceed ASTM F1941. Hot-Dip Galvanized material will meet or exceed ASTM A153. Typical hardness is HRB 70-100. Tensile strength (not pull out) will meet a minimum of 60,000 psi.
More

1/4 x 4 Hex Lag Screw Hot...

$0.25
FMW Fasteners 1/4 x 4 Hex Lag Screw Hot Dipped Galvanized
+ $6.50 shipping
/14-x-4-hex-lag-screw-hot/1OtPbhB35OlshImPf7tRrQ==/info
FMW Fasteners
IN_STOCK ( In stock )
Store not rated
1/4 x 4 Hex Lag Screw Hot Dipped Galvanized - Hex Lag Screws are manufactured from low carbon steel to meet SAE J429 Grade 1. Lag screws longer than 12 inches will have a minimum thread length of 50% of the screw length up to a maximum of 8 inches. Zinc plated material will meet or exceed ASTM F1941. Hot-Dip Galvanized material will meet or exceed ASTM A153. Typical hardness is HRB 70-100. Tensile strength (not pull out) will meet a minimum of 60,000 psi.
More

3/8 x 1 3/4 Hex Lag Screw Hot...

$0.30
FMW Fasteners 3/8 x 1 3/4 Hex Lag Screw Hot Dipped Galvanized
+ $6.50 shipping
/38-x-1-34-hex-lag-screw/22uJfSD10aW_Jvj6kYKy-A==/info
FMW Fasteners
IN_STOCK ( In stock )
Store not rated
3/8 x 1 3/4 Hex Lag Screw Hot Dipped Galvanized - Hex Lag Screws are manufactured from low carbon steel to meet SAE J429 Grade 1. Lag screws longer than 12 inches will have a minimum thread length of 50% of the screw length up to a maximum of 8 inches. Zinc plated material will meet or exceed ASTM F1941. Hot-Dip Galvanized material will meet or exceed ASTM A153. Typical hardness is HRB 70-100. Tensile strength (not pull out) will meet a minimum of 60,000 psi.
More

1/4 x 2 1/2 Hex Lag Screw Hot...

$0.18
FMW Fasteners 1/4 x 2 1/2 Hex Lag Screw Hot Dipped Galvanized
+ $6.50 shipping
/14-x-2-12-hex-lag-screw/7gy_nXzEPHIckdq03pZdDw==/info
FMW Fasteners
IN_STOCK ( In stock )
Store not rated
1/4 x 2 1/2 Hex Lag Screw Hot Dipped Galvanized - Hex Lag Screws are manufactured from low carbon steel to meet SAE J429 Grade 1. Lag screws longer than 12 inches will have a minimum thread length of 50% of the screw length up to a maximum of 8 inches. Zinc plated material will meet or exceed ASTM F1941. Hot-Dip Galvanized material will meet or exceed ASTM A153. Typical hardness is HRB 70-100. Tensile strength (not pull out) will meet a minimum of 60,000 psi.
More

3/8 x 1 1/4 Hex Lag Screw...

$0.20
FMW Fasteners 3/8 x 1 1/4 Hex Lag Screw Zinc Plated
+ $6.50 shipping
/38-x-1-14-hex-lag-screw/9HAKWnEEnwDjg7zAcgdEVA==/info
FMW Fasteners
IN_STOCK ( In stock )
Store not rated
3/8 x 1 1/4 Hex Lag Screw Zinc Plated - Hex Lag Screws are manufactured from low carbon steel to meet SAE J429 Grade 1. Lag screws longer than 12 inches will have a minimum thread length of 50% of the screw length up to a maximum of 8 inches. Zinc plated material will meet or exceed ASTM F1941. Hot-Dip Galvanized material will meet or exceed ASTM A153. Typical hardness is HRB 70-100. Tensile strength (not pull out) will meet a minimum of 60,000 psi.
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2017 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-r.2017.sprint10.beta.config.sync-30465
http://img.shoppingshadow.com/jfe/JavaFrontEnd-r.2017.sprint10.beta.config.sync-30465