1 4 brass rod

Threaded Rods and Studs are intended for situations when fast assembly and disassembly are required. Studs are generally shorter in length than Threaded Rods. Brass is rust proof, corrosion resistant and polishes to a rich, golden color. Brass is easily soldered and brazed and accepts plating readily. The typical composition is 70% Copper and 30% Zinc. Strength increases with a higher percentage of Zinc.A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Fine threads are preferable when working with harder materials or when threading into a thin material. They are also stronger in tension than coarse threads, and generally provide higher shear strengths.

360 BRASS ROD 2.28'' DIA. 12-1/2 IN. LONG This bar is a bit over size and should clean up at 2-1/4 if your care full. FREE USPS priority mailing. Thank You MM APPLICATIONS 360 Brass has a wide range of applications, such as screw machine parts, couplings, bushings, connectors, fittings, circuit board relays, electronic components, switches, nuts, bolts, valve stems and valve components, pump shafts, brackets, frames, fixtures, ornamental works, and used extensively in the musical instrument, el

360 BRASS ROD 1-3/4 IN. DIA. 12 IN. LONG MM APPLICATIONS 360 Brass has a wide range of applications, such as screw machine parts, couplings, bushings, connectors, fittings, circuit board relays, electronic components, switches, nuts, bolts, valve stems and valve components, pump shafts, brackets, frames, fixtures, ornamental works, and used extensively in the musical instrument, electrical equipment, plumbing, central heating, seawater lines and desalination fields. MACHINEABILITY AND WELDABILI

Package includes Four 1/16 Solid Brass Telescopic rods by K&S Engineering. FEATURES: Solid brass Carefully engineered! Unlimited uses in the development of all types of projects So easy to bend and form, it works great and looks wonderful when framing, name plates, inlays, or using as a decorative finish. Cut to desired length Great for scratch builders, modelers, crafts, machine shops, and architectural applications. A few ideal projects are wind chimes, ornaments, miniature furniture, votive candle holders, angel wings, and stained glass. Packaging is for a countertop or pegboard displayINCLUDES: Four Solid Brass Telescopic RodsSPECS: Diameter: 1/16 Length: 12K&SPart K+S5162

Threaded Rods and Studs are intended for situations when fast assembly and disassembly are required. Studs are generally shorter in length than Threaded Rods. Brass is rust proof, corrosion resistant and polishes to a rich, golden color. Brass is easily soldered and brazed and accepts plating readily. The typical composition is 70% Copper and 30% Zinc. Strength increases with a higher percentage of Zinc.A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Fine threads are preferable when working with harder materials or when threading into a thin material. They are also stronger in tension than coarse threads, and generally provide higher shear strengths.

1/4 Brass C360-H02 Brass Rod - 48 Length Material Details Diameter: 1/4 [.250]Length: 48Alloy: C360-H02 Weight: 0.723 lbs Quantity: 1 piece Cutting Tolerance: +/- .060Payment and Shipping We do accept checks and money orders, but there will be a delay in shipping. To process your order right away use PayPal payments only .Immediate payment is required for our items and nothing will be shipped until money has been received and cleared.All items will be posted to the address selected while

.250 1/4'' Brass Round Bar Rod C360 x48''“Why buy the full length when all you need is the remnant?” We will combine shipping on all multiple orders to save you money. We will always give 100% Customer Satisfaction or refund. If there is any problem with the material you received, please contact us before leaving any feedback so that we can fix any problem. We ship most materials out within 1-2 business days. Please contact us if you need any additional value added services such as: Shearin

Most often used on machine screws and threaded rod, these general purpose nuts are for low-strength assemblies. Hex Nuts have flat tops with chamfered corners; bottoms may be flat or chamfered. Hex drive systems are driven with a wrench.Brass is rust proof, corrosion resistant and polishes to a rich, golden color. Brass is easily soldered and brazed and accepts plating readily. The typical composition is 70% Copper and 30% Zinc. Strength increases with a higher percentage of Zinc.A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse... Less

Aluminum Aluminum Stainless Steel Brass and Copper Steel Other Items Contact Us Store Home 1/4 (.250) Brass Alloy 360 Round Bar 12' length *This item will be shipped as three 4' (48) pieces.* Brass is a relatively corrosion resistant alloy consisting of basically copper and tin. Additions of zinc, iron and lead are made to provide machinability. Brass is used where corrosion resistance is important in marine environments and also where you can shine parts for appearance. Brass is also referre

4 Brass C360-H02 Brass Rod - 1/2 Length Material Details Diameter: 4 [4.000]Length: 0.500Alloy: C360-H02 Weight: 1.928 lbs Quantity: 1 piece Cutting Tolerance: +/- .060Payment and Shipping We do accept checks and money orders, but there will be a delay in shipping. To process your order right away use PayPal payments only .Immediate payment is required for our items and nothing will be shipped until money has been received and cleared.All items will be posted to the address selected whil

Aluminum Stainless Steel Brass and Copper Steel Other Items Contact Us Store Home 1-3/4 (1.750) Brass Alloy 360 Round Bar 12 length Brass is a relatively corrosion resistant alloy consisting of basically copper and tin. Additions of zinc, iron and lead are made to provide machinability. Brass is used where corrosion resistance is important in marine environments and also where you can shine parts for appearance. Brass is also referred to as Alloy 360, 360 Brass, UNS C36000 as well as FCB (Fre

Adaptor, 1/4-20 x 3/8-16 Connection, Material of Construction Brass, For Use With Float Balls, Float Rods, Valves Brass Float Valve AccessoriesFloat rods are threaded on both ends; stainless steel models resist corrosion. Nuzzle assemblies allow cattle to nuzzle a float without doing damage.

The Watts 1/4 in. Brass Short Rod-Flare Nut is commonly used for gasoline, grease, oil, water, LP and natural gas lines. This flare nut can be used for applications involving hard-to-hold liquids and gases when used with forged nut #412, 413 or 413R (not included ).Brass For use with copper, brass, aluminum and welded-steel hydraulic tubing that can be flared Use for gasoline, grease, oil, water, vacuum, air, LP and natural gas lines Use for applications involving hard-to-hold liquids and gases

Pipe, Schedule 40, Pipe Size 2 1/2 In, 36 In Length, Connection Threaded On Both End, Material Of Construction Red Brass, Outside Dia. 2 7/8 In, Thread Size 8 In, Pressure 125 Psi, Temp. Range - 20 To 400 Degrees F, Standards Astm B687, Ansi B1.20.1, Compliance Nsf 61 And Ab1953 Listed, Certification For Use In Potable Water Applications In Ca, Md, And Vt

Aluminum Aluminum Stainless Steel Brass and Copper Steel Other Items Contact Us Store Home 1/4 (.250) Copper C110 Round Bar 12' length *This item will be shipped as three 4' (48) pieces.* C110 is the most common type of copper. It is universal for electrical applications. C110 copper is also referred to as Oxygen-free copper (OFC) or Oxygen-free high thermal conductivity (OFHC). Round Bar, Shaft Rods, Rounds, Rod, Slick Rod, Rods, Shaft Rod, Round Stock, and Slick Rods are all terms often use

1/4 Antique Brass Colored Aluminum Screw Posts - 100pk Antique Brass colored aluminum screw posts allow you to create elegant and refined swatch books, menus, leather goods and bound documents in seconds. All you need to do is punch a hole in your document using a standard 3 hole punch or paper drill and insert the screw post. It doesn't get much easier than that. Screw posts are easy to install and your finished document will be easy to edit. These particular screw posts have an antique brass finish to help you achieve the look and feel that you desire. Comprised of a screw and a post, they are also called Chicago Screws or Chicago Screw Posts. Your portfolio, scrap book, photo album, or any loose sheet project will look fantastic bound with these 1/4 antique brass colored aluminum... Less

#4-40 brass machine screws with flat head and slotted drive. The most common screw head type -- used for general fastening when the screw head will be flush with the surface or when it will be countersunk and the hole will be plugged. Many boatbuilders especially ones with traditional old school tendencies prefer a Brass machine screw. Brass offers great corrosion resistance and along with the slot drive provides the classic look of traditional boatbuilding. Remember Brass is soft and requires a carefully sized pilot hole. Our Flat head machine screws have a standard 82 degree countersink design

1/4 Brass L Shelf Pins w/ Vinyl are L shaped and fit your drilled 1/4 inch holes common on shelving, bookcases and cabinets. Polished brass finish with plastic coating. Suitable for wood, metal or glass shelves.

New Page 1 The Proaxis ranges of 1 and 4 section fly rods have been designed and developed by Hardy in conjunction with some of the worlds finest saltwater guides and anglers. Our development team, led by five times Tarpon Gold Cup Grand Champion, Andy Mill, have pushed Hardy’s new Sintrix technology to the absolute limit - and the end result is staggering in both performance and durability. These fast-action rods are loaded with cutting edge features, like lightweight saltwater-safe hardware, titanium recoil guides and, of course, Hardy’s revolutionary Sintrix material. Proaxis rods are lighter, stronger, more impact resistant and capable of withstanding much higher loads than standard graphite fly rods. So,... Less

Door Guard & Surface Bolt Collection Heavy Duty Dutch Door Bolt - 4-1/4 Inch Dutch doors can add a lot of style to your home, but securing them can sometimes become a hassle. Enter the Baldwin 0345 heavy Dutch door bolt. Constructed from solid extruded brass, with a large decorative knob for easy handling, each bolt ensures that the leaves of your Dutch doors are tightly joined with just the right amount of wiggle room to ensure your bolt doesn't bind up. With all the proper fasteners included, as well as the associated strike, installation is easy and quick. Baldwin knows that peace of mind is important, and with quality door security, it's that much easier to achieve. Features: Length: 4.25 (108mm) Rod Width: 0.625 (16mm) Guide Width: 1.5 (38mm) Bolt Throw: 1.125 (28mm) Designed for Use... Less

4 Wire Cage - 1/4 Rod Rubberset has always delivered a complete line of applicators and accessories ensuring that you are prepared for any paint project. 12.50 L. 1.75 W. 9.50 H.

Door Guard & Surface Bolt Collection Heavy Duty Dutch Door Bolt - 4-1/4 Inch Dutch doors can add a lot of style to your home, but securing them can sometimes become a hassle. Enter the Baldwin 0345 heavy Dutch door bolt. Constructed from solid extruded brass, with a large decorative knob for easy handling, each bolt ensures that the leaves of your Dutch doors are tightly joined with just the right amount of wiggle room to ensure your bolt doesn't bind up. With all the proper fasteners included, as well as the associated strike, installation is easy and quick. Baldwin knows that peace of mind is important, and with quality door security, it's that much easier to achieve. Features: Length: 4.25 (108mm) Rod Width: 0.625 (16mm) Guide Width: 1.5 (38mm) Bolt Throw: 1.125 (28mm) Designed for Use... Less

3/32 D x 36 L For hobbies and model building Easy to bend, cut and solder Brass

This swivel ceiling rod support with loop allows for any angle installation and is perfect for sloped ceilings. Swivel flange allows for any angle installation. Great for irregular ceilings. Available in 36 or 48 lengths Rods are 1/4 thick. Choice of 3/4 or 1 OD eye loop. Cut to length to fit your ceiling height.

Pipe, Schedule 40, Pipe Size 1 1/4 In, 60 In Length, Connection Threaded On Both End, Material Of Construction Red Brass, Outside Dia. 1 2/3 In, Thread Size 11 1/2 In, Pressure 125 Psi, Temp. Range - 20 To 400 Degrees F, Standards Astm B687, Ansi B1.20.1, Compliance Nsf 61 And Ab1953 Listed, Certification For Use In Potable Water Applications In Ca, Md, And Vt

Hinge, Commercial Grade, Material Steel, Color Bright Brass, Finish Bright Brass, Height 4-1/2 In., Length 4 In., Width 4 In., Pin Dia. 5/16 In., Pin Material Steel, Door Thickness 125 In., Range of Motion -, Thickness 0.134 In., Holes per Leaf 4, Pin Type -, Corners Square, Door Leaf Length 4-1/2 In., Door Leaf Width 1-5/8 In., Frame Leaf Length 4-1/2 In., Frame Leaf Width 1-5/8 In., Leaf Thickness 0.134 In., Load Capacity 125 lb., Stanley Class Number F179, Stanley EDP Number 053877

1/4 Brass L Shelf Pins are L shaped and fit your drilled 1/4 inch holes common on shelving, bookcases and cabinets. Polished brass finish. Suitable for wood, or metal shelves.

The Frasco 5 1/4 inch Brass Folding Stand Mirror (5X) which features a sturdy double legged stand is a popular sized cosmetic mirror that adds precision to your daily routine. With a mirror that easily swivels back and forth between 5X magnification and normal magnification, this mirror allows you to perfect your beauty ritual. Frasco mirrors have been manufactured in Germany since 1920. Manufacturing designs based on decades of experience in combination with skilled craftsmanship and using only the finest brass alloys, Frasco mirrors can be found in all places where classic taste and lasting quality are given preference. Type: Folding Stand Shape: Round. Magnification: Regular reversing to 5x. Dimensions (not including frame): 4 5/8 Diameter. Metal Finish: Polished Brass.