This is a Trumpeter 1/35 scale assembly required plastic model kit of the Flakpanzer Panther Ausf.G mit 5.5cm Flakzwilling, a World War II era prototype German anti-aircraft tank based on the chassis of the Panther tank design. This kit comes with 247 parts mounted on 6 sprues and parts for upper hull, lower hull, turret and rubber tracks. Photo-etched parts and brass wires are also included. Illustrated assembly guide and waterslide decal sheet included. ABOUT THE FLKAKPANZER PANTHER: Towards the end of World War II, Allied air power dominated the skies over Europe, and Germany ground forces was in need of a more heavily armored self-propelled anti-aircraft tank. A solution was found in a proposed anti-aircraft tank equipped with a 5.5 cm anti-aircraft gun turret mounted on a Panther... Less

1/35 Scale. The LAV-M is an all-terrain, all-weather vehicle with night capabilities. It provides indirect fire support to light infantry and reconnaissance forces; providing high explosive area fire, covering smoke and illumination for first line-units. It is air transportable via C-130, C-141, C-5 and CH-53 E. When combat loaded there are 5 ready and 94 stowed 81mm bombs as well as 200 ready rounds and 800 stowed rounds of 7.62mm ammunition. There are 8 ready rounds and 8 stowed rounds of smoke grenades. The base plate and bipod for ground mounted mortar is stowed on the vehicle. The vehicle can be made fully amphibious within 3 minutes. 237pcs. Decal Marking: United State Marine Corps

The IT-1 was a Soviet cold war missile tank based around the hull of the T-62. The tank fired specially designed 3M7 Drakon missiles from a pop-up launcher. It saw a very limited service between 1968 and 1970. The large deadzone around the tank created by the missiles' minimum range combined with the limited amount of ammunition carried made it unpopular with the military. The IT-1 had a crew of three: a driver, gunner and commander. It was armed with a pop-up missile launcher fitted into a low profile turret along with a 7.62mm PKT machine gun with 2000 rounds of ammunition. Kit consists of over 490 parts on 21 sprues plus hull. Includes individual track links and a photo-etched engine cover grill.

Trumpeter 1/35 00511 A R-15/M 16/M 4 FAMILY-M 16A4

1/35 Scale. Stryker Command version. Kit features highly detailed chassis and hull exterior, separately molded hatches and rear door, stowage bins, jerry cans, vinyl tires, 3 crew figures, choice of 2 commanders and 1 partial driver, Protector M151 remote weapon station with M2 .50 caliber machine gun, cut-and-fold MRE, soft drink and water cases, material for straps, window masks and photo-etch parts (grilles, suspension covers, cable cutter, smoke grenade launcher brackets and additional details). Decals and color painting guide for 2 typical vehicles.

Collectors Items, Rarities, New Releases and other needful things Modelers- Paradise Ltd.Co Visit our brick and mortar store in Florida, Tampa Bay Area, Largo. 1/35 GERMAN E100 SUPER HEAVY TANK TRUMPETER NEW Rare find Subscribe to our NEWSLETTER and save up to 20% on special offers ! Here is what to consider:Item Description: Anything less than NEW or ORIGINAL BOXED will be indicated in our offer.Collectors items or "oldies" might show signs of age which is normal and will not be mentioned extra

1-35 Scale. Kit consists of 411 parts on 7 sprues plus copper towing cable, 8 rubber tires and 34 photo etched parts. Additional features: suspension and drive train are all individual parts, excellent tread pattern and sidewall details on tires, excellent surface details, top-mounted machine gun 42/59 is included. Markings for RLAC-9 Numancia, RLAC-11 Espana and RCL-8 Lusitania regiments

Highly detailed 1/35 scale assembly model kit of the PT-76, a light amphibious tank developed by the former Soviet Union. Introduced in the early 1950's, the PT-76 became the standard reconnaissance tank of the Soviet Army and many of its allies, which include North Vietnam, which operated the PT-76 during the Vietnam War. This 1/35 scale assembly kit by Trumpeter depicts the PT-76B variant (PT-76 Model 4, Ob'yekt 740B, 1958), which is a PT-76 with a 76.2 mm D-56TS or D-56B rifled tank gun and other improvements. This kit comes with photo-etched parts for added realism. 176 pieces total.

Horizon Hobby | Product Name Shipping Returns About Horizon Contact Airplanes Helicopters Surface Radios Powerplants Tools Trains General Site Categories Airplanes Helicopters Surface Radios Powerplants Tools Trains General Trumpeter Models 1/35 280MM Leopold Railroad Gun (TSM207) Item Condition All items sold by Horizon Hobby are sold as New: A brand-new, unused, unopened, undamaged item. We do not sell used, opened, or damaged items. If an item is damaged during shipping, please see our Retur

1-35 Scale. This kit consists of 401 parts plus barrel carriage, rubber tires, two metal springs, metal tube, photo-etched parts, newly designed gun breech-mechanism and markings for German Army in field grey camouflage. Additional features: rotating platform, either fire or travel position can be built and can be elevated to different angles. Instructions included. Skill Level 2.

1/35 Scale. Kit consists of 205 parts on 4 sprues, 4 rubber tires, photo etched mesh guard, metal stamped brass hydraulic lever covers, and markings for the Marine Air-Ground Task Force, Australia. Additional features include Hand wheels, gun that can be elevated, towing cable and eight M107 shells.

1/35 Scale. Kit consists of 491 parts on 15 sprues plus hull and 8 rubber tires. Additional features include 4 infantry figures, packs, tarp rolls and 46 photo-etched parts, machine guns, jerry can mounts, etc

STOCK# - TSMS0398 MFG# - 00398 New and unused. This is the 1/35 scale M1131 Stryker Fire Support Vehicle plastic model kit by Trumpeter For ages 14 years and up FEATURES: Highly detailed plastic models molded in grey Includes black rubber-like tires Photo-etched parts Brass wire included for extra detail Crew figures included Waterslide decals Create stowage sets that include water cases beverage boxes and MRE ration packs Illustrated instructions with paint/marking guide included INCLUDES: (1) 1/35 scale M1131 Stryker Fire Support Vehicle REQUIRES: Assembly Sprue cutters (HCAR0630) Hobby knife (RMXR6909) Tweezers (TAMR7403) Pin vise (HCAR0696) SPECS: Length: 7.99 (203 mm)

This is a Trumpeter 1/35 Scale assembly and painting required plastic model kit of the Hetzer-Starr, a late prototype variant of the World War II era German Jagdpanzer 38(t) (Sd.Kfz. 138/2) tank destroyer, commonly known as the Hetzer. Model kit features: Kit has crisply detailed exterior surfaces, multipart sprockets and idlers, individual link workable track, engine bay interior with Praga engine, optional position upper superstructure hatches, separately molded on-vehicle equipment, unique pattern gun mantlet, roof-mounted remote MG 34, side skirts, braided metal tow cable, and photo-etch parts (grilles, gun shield and brackets). Decals and color painting guide for a typical German vehicle - includes numerals 0-9 (red with white outlines) for alternate schemes. 780 plus parts on 25... Less

1/35 Scale. Measures 37 inches long! This new release from Trumpeter features 1140 pieces, metal rail chain, photo etch parts included For (chimney brace frame) grills. Included railroad track section can be finished as a straight track or a cross track, Shells, cartridges and an ammunition wagon are included, Detailed hand rails. Markings for two versions are included: 1: "Anzio Annie", Italy 1944. 2: Eisg. Battr. 710 Calais/France 1941. Skill level 2 Although from the mid-19th century, people started considering imparting mobility to large caliber artillery pieces by placing them on special railway mountings, it was WWII that gave the impetus to making the railway gun an important part of many European armories. The German Leopold Gun was the largest weapon, which lobbed shells at... Less

TRUMPETER, TSM1539 1:35 GER E75 FLAKPANZER This is a 1/35 Scale German E-75 Flakpanzer Plastic Model Kit from Trumpeter®. Suitable for Ages 14 Older. FEATURES: Molded in gray plastic with many intricate details Scale model for adult collectors Photo-etched parts Waterslide decals Illustrated assembly guide INCLUDES: One plastic model REQUIRES: Assembly Paint (Metal Black, Wood Brown, Red Brown, Dark Yellow, Steel, Burnt Iron) SPECS: Scale: 1/35 Length: 10.7" (271.8mm) Width: 4.31" (109.5mm) Pa

1/32 Scale. Sukhoi, multi-role, all-weather fighter, air-to-air/air-to- surface deep interdiction. Kit features screw reinforced construction, fine engraved panel lines and rivets, highly detailed cockpits, ejection seats, wheel wells gun bay and sprung landing gear. Also includes multi-part canopy, separately molded leading edge flaps, vinyl tires, optional white metal landing gear struts, photo-etch parts (seatbelts, canopy mirrors and pivots) and hinged (with metal rod) flaperons, rudders and speed brake. External stores include each: KH-29L, KH-31P, KH-29T, KH-35A, KAB-500L, KAB-500Kr, MH-25ML, KH-25MP, KMGU-2, R-60MK, FAB-100, FAB-500, FAB-250, ZB-500 and 4 each R-77s. Decals and color painting guide for Russian demonstrator 'White 502' and Chinese Air Force, includes weapon... Less

1/35 Scale. Kit consists of 492 parts on 17 sprues plus newly tooled lower & upper hulls, photo-etched parts, turned aluminum gun barrel, individual track links, opening and closing engine cover, separate defender, detailed suspension

Early variant with the first series of upgraded armor. This vehicle was used in Bosnia- Herzegovina during IFOR. Kit consists of over 300 parts on 8 sprues and features underside suspension and drive train made up of individual parts, separate rear panel with rear armored hatch, copper tow cable and 30 photo-etched detail parts for grills, light guards, etc.

USMC LAV-R Light Armored Vehicle Recovery The LAV-R is an all-terrain, all-weather vehicle with night capabilities. This vehicle is be capable of safely uprighting overturned LAVs while minimizing additional damage. It has the tactical mobility to reach and recover/support disabled vehicles. The vehicle is capable of towing a disabled LAV with suspension damage. It is air transportable via C-130, C-141, C-5 and CH-53 E. When combat loaded there are 200 ready rounds and 800 stowed rounds of 7.62mm ammunition. There are 8 ready rounds and 8 stowed rounds of smoke grenades. The vehicle can be made fully amphibious within 3 minutes. Length 7.3m. Width 2.5m. Height 2.69m. Curb weight 11330kg. Gross weight (max.) 12664 kg. THIS MODEL KIT HAS 228 PARTS AND FEATURES: PHOTO ETCHED PARTS A... Less

These of armored trains became prevalent during WWII initially on the Eastern Front. Transport through occupied areas of Eastern Europe became dangerous due to partisan groups attacking advancing troops. The Germans considered armored trains a more secure method of transporting equipment through these areas. For added protection of the locomotive, it was often placed in the middle of the train. The loco itself was protected by 13 tons of steel plating making the total weight of this locomotive was nearly 90 tons. The BR.57 had a top speed of 60km/h and had a range of 360km when pulling the cars loaded with vehicles and equipment. Kit consists of 602 parts on 16 sprues plus 8 track roadbed sections. Paint colors needed: Steel, Sandy Brown, Wood Brown, Dark Green, Dark Compass Ghost Gray,... Less

1-35 Scale. Highly detailed kit by Trumpeter complete with decals and instructions. Skill level 2.

Home About Us Return Policy Shipping Policy Payments Store Search in titles descriptions Store Pages Store Categories Trumpeter 01524 1/35 German 2cm Flakvierling New in box Item Description 1/35 Scale. Injection molded plastic parts with scribed surface details, Detailed cockpit with clear canopy, Waterslide decals for two paint schemes, Illustrated assembly guide. Length: 23.29" (591.8mm) Wingspan: 18.72" (475.7mm) Parts: 398 Features and Details 1: Assembly Required Skill Level 2. Ages 10 an

1/35 Scale. Kit consists of 430 parts on 9 sprues plus cab and 5 rubber tires, a photo etched fuel tank mount and markings for the US Army. Additional features include a detailed dashboard, fully detailed drive train assembly and detailed tread pattern on tires. Completed kit measures over 7" long.

SquareTrade © AP6.0 BMP-3 with Upgrade Armor Scale 1/35 Kit #365 Factory Sealed "Click here to subscribe to my newsletter." http://stores.ebay . com/Worldwide- Hobby-and- Collectables_W0QQ sspagenameZMEQ3aF Q3aSTQQtZkm Soviet/Russian- built 'Troika' amphibious mechanized infantry combat vehicle. Kit has excellent exterior detail (reasonable rivets, engraved panel lines and appropriate weld beads), suspension with individual link track (including separate guide horns), interior detail (driver's compar

' SquareTrade © AP6.0 Russian BTR-60PB Scale 1/35 Kit #01544 Factory Sealed "Click here to subscribe to my newsletter." http://stores.ebay . com/Worldwide- Hobby-and- Collectables_W0QQ sspagenameZMEQ3aF Q3aSTQQtZkm Soviet amphibious wheeled 8x8 armored personnel carrier, improved variant with armored roof and turret mounted coaxial KPVT heavy and PKT light machine guns. Kit has well detailed exterior hull, excellent multipart suspension, optional position forward view port covers, separately molded

Trumpeter 1/35 M1126 Stryker ICV TSM375 This is a M1126 "Stryker" (ICV) Plastic Model Kit from Trumpeter®. Suitable for Ages 14 & Older. FEATURES A superb representation of the real thing! Lower hull with an enormous amount of detail, such as the gear boxes, drive shafts and power train. Exquisitely detailed rear panel, which either the ramp or its door can be fixed in the open or closed position. Photo etched tie-down straps and vent covers. Meticulously detailed Commander's Remote Weapon's Station. Superbly detailed upper hull with many separately applied tools and accessories. Vinyl tires with realistic tread. Waterslide decals. Illustrated assembly guide. INCLUDES: (1) Plastic Model REQUIRES Assembly Cement (HCAR3415) Hobby Knife (RMXR6901) Pin Vise (HCAR0696) Paint (Silver, Flat... Less

1/35 Scale. 3.7cm Flak 43 Ostwind. Mount on a Panzer VI chassis anti-aircraft gun with open-top hexagonal turret. Kit has fine exterior detail, individual link track, full detailed hull interior,driver, fighting and engine compartments, bulkheads, transmission, radiators and engine, separately molded hatches and on-vehicle equipment, detailed FlaK 43 gun/w training gear and ammunition, plus photo-etch parts, includes mounting brackets and turret plates. Color painting guide and decals,national insignia and tactical numbers

1-35 Scale. Kit consists of 521 parts. Markings included for Iraq, 2004. Instructions included. Skill Level 2.

Home About Us Return Policy Shipping Policy Payments Store Search in titles descriptions Store Pages Store Categories Trumpeter 388 1/35 Spanish VRC-105 Centauro RCV New in box Item Description 1-35 Scale. Kit consists of 411 parts on 7 sprues plus copper towing cable, 8 rubber tires and 34 photo etched parts. Additional features: suspension and drive train are all individual parts, excellent tread pattern and sidewall details on tires, excellent surface details, top-mounted machine gun 42/59 i