Wright Tool 419 Socket Set 1/2" Drive 6pt 14 Piece WRIGHT TOOL SOCKET SET (419) 1/2" DR 14PC (4014) 7/16" (4016) 1/2" (4018) 9/16" (4020) 5/8" (4022) 11/16" (4024) 3/4" (4026) 13/16" (4028) 7/8" (4030) 15/16" (4032) 1" (4034) 1-1/16" (4036) 1-1/8" (4038) 1-3/16" (4040) 1-1/4" (2-W010) Rails (W4) 14 Clips 1/2" Dr., 14 Pc. 6 Pt. Socket Set, 7/16" - 1-1/4" on a Rail This is a new Wright Tool item and comes with a full Wright Tool Warranty. 1/2" Dr., 14 Pc. 6 Pt. Socket Set, 7/16" - 1-1/4" on a Rail Hangable clip to keep your tools organized Made in the USA Wright professional tools are hot-forged from tough 4140 alloy steel for strength, wear resistance and reliability. Extra torque driving power that also protects against fastener rounding Limited Lifetime Warranty Drive 1/2"

Kit Includes: Ratchet3 and 6 Flared Extension1/2, 7/32,9/16, 5/8, 1/16, 3/4, 13/16, 7/8, 15/16, 1 SocketsComes is a plastic tool caseEach hand tool manufactured is rated for exposure up to 1000VAC and dielectrically tested at 10,000VAC. These tools meet or exceed ASTM F1505-01 and IEC 900 Standards for Insulated Hand Tools. These tools are necessary for compliance with OSHA 1910.333 (c)(2), and NFPA 70E 2004. The insulating material used is impact resistant and flame retardant. Two-color insulation makes inspection easier which adds to the overall safety. If the yellow under layer is showing, the tool may no longer be insulated properly and should be considered for replacement and removed from service.While over 90% of our insulated tools are kept in stock, some specialty items may have... Less

27 - Pc. Industro 1/2" Drive Combo Socket Set. Built right, with a patented design... each socket fits both SAE and Metric! Who knows why your car has both SAE and Metric fasteners? It doesn't make sense, but you have to adapt. And you know well that not having the proper tool can bring any job to a grinding halt. Well, here's a bit of smart versatility to keep you going, even when working with both SAE and metric... each Socket fits: 6-pt. SAE; 6-pt. Metric; 12-pt. SAE; Square; 30% rounded / stripped; Female Torx (E); Spline. It's like 2 sets in 1! Don't clutter your work space with unnecessary tools when this Set's got you covered! Tough-as-nails, too... made from professional quality chrome vanadium steel, for all the pounding, wrenching, hammering, dropping, tossing, and general abuse... Less

60 - Pc. Industro 1/4" and 1/2" Drive Combo Socket Set. Built right, with a patented design... each socket fits both SAE and Metric! Who knows why your car has both SAE and Metric fasteners? It doesn't make sense, but you have to adapt. And you know well that not having the proper tool can bring any job to a grinding halt. Well, here's a bit of smart versatility to keep you going, even when working with both SAE and metric... each Socket fits: 6-pt. SAE; 6-pt. Metric; 12-pt. SAE; Square; 30% rounded / stripped; Female Torx (E); Spline.; It's like 2 sets in 1! Don't clutter your work space with unnecessary tools when this Set's got you covered! Tough-as-nails, too... made from professional quality chrome vanadium steel, for all the pounding, wrenching, hammering, dropping, tossing, and... Less

cf477 store New 9 Piece 1/2" Drive Star Bit Set This professional quality star-bit set lets you easily remove and replace Torx fasteners. High visibility markings for easier, faster bit selection Chrome vanadium steel construction Meets or exceeds ANSI standards Sizes: T20, T25, T27, T30, T40, T45, T50, T55, T60 Shipping: We only ship to the lower 48 states, and Puerto Rico. Item will be shipped within 1-3 days of recieving payment . Each item will be specially packaged with the outmost care so

99 - Pc.Industro 1/4", 1/2", and 3/8" Drive Combo Socket Set. Built right, with a patented design... each socket fits both SAE and Metric! Who knows why your car has both SAE and Metric fasteners? It doesn't make sense, but you have to adapt. And you know well that not having the proper tool can bring any job to a grinding halt. Well, here's a bit of smart versatility to keep you going, even when working with both SAE and metric... each Socket fits: 6-pt. SAE; 6-pt. Metric; 12-pt. SAE; Square; 30% rounded / stripped; Female Torx (E); Spline.; It's like 2 sets in 1! Don't clutter your work space with unnecessary tools when this Set's got you covered! Tough-as-nails, too... made from professional quality chrome vanadium steel, for all the pounding, wrenching, hammering, dropping, tossing,... Less

52 - Pc. Combo Ratchet / Socket Set... let your inner handyman come out! Stop borrowing the neighbors' tools and get your own set! This awesome Combo Ratchet / Socket Set features triple chrome-plated pieces for that nice, shiny look. Ratchets are drop-forged for durability. Comes with 3 phillips and 2 standard (3/16" and 9/32") screwdriver bits. Also includes 1/2", 3/8" and 1/4" Ratchet drives. The rundown: One 1/2" drive reversible ratchet handle; One 3/8" drive reversible ratchet handle; One 3" extension bar; One 1/4" drive spinner handle; One 1/4" (metric) x 3/8" adapter; One molded case for easy transport; One coupler; One spark plug socket 5/8"; Three 3/8" drive 6 pt. sockets: 7/16", 9/16", 1/2"; Three 1/4" drive 8 pt. sockets: 1/4", 5/16", 3/8" ; Four 1/2" drive 6 pt. sockets:... Less

111 - Pc.Industro 1/4", 1/2", and 3/8" Drive Combo Socket and Wrench Set. The Godfather or all socket sets, plenty of sizes for any job! Patented design means each socket and wrench fits both SAE and Metric! Who knows why your car has both SAE and Metric fasteners? It doesn't make sense, but you have to adapt. And you know well that not having the proper tool can bring any job to a grinding halt. Well, here's a bit of smart versatility to keep you going, even when working with both SAE and metric... each Socket and Wrench fits: 6-pt. SAE; 6-pt. Metric; 12-pt. SAE; Square; 30% rounded / stripped; Female Torx (E); Spline.; It's like 2 sets in 1! Don't clutter your work space with unnecessary tools when this Set's got you covered! Tough-as-nails, too... made from professional quality chrome... Less

Idler Bushing, Max Radial Load @ 100 Rpm 1518 Lb, Max Radial Load @ 500 Rpm 1016 Lb, Max Radial Load @ 1000 Rpm 854 Lb, Max Radial Load @ 1500 Rpm 772 Lb, Max Radial Load @ 2000 Rpm 718 Lb, Max Radial Load @ 2500 Rpm 678 Lb, Max Radial Load @ 3000 Rpm 648 Lb, Max Radial Load @ 3500 Rpm 624 Lb, Ball Bearings, Use With Drive Tightener 6agk8, For Use With H Bushed Sheaves, Sprockets Or Gearbelt Pulley, Converts Any H Browning Split Taper Bushing Product Into An Idler, Includes Capscrews, Bolt,

Loose bolts dont stand a chance. 1/2" drive Hightorque design SAE and metric standard and deep sockets Smaller ratchet head is designed for small spaces Chrome vanadium for strength and durability Limited lifetime warranty40pc. set includes:12 SAE 12point sockets: 1/2" 9/16" 5/8" 11/16" 3/4" 13/16" 7/8" 15/16" 1" 11/16" 11/8" and 11/4? 10 metric 12point sockets: 12mm 13mm 14mm 15mm 17mm 18mm 19mm 21mm 22mm and 24mm6 SAE 12point deep sockets: 9/16" 5/8" 3/4" 13/16" 7/8" and 15/16"6 metric 12point deep sockets: 14mm 15mm 17mm 18mm 19mm and 21mm5/8" and 13/16" spark plug socketsQuickrelea se ratchet1 universal join5" extension15? flex handleIncludes case

Features and Benefits: Forged from the finest chrome molybdenum alloy steel – the best choice for strength and durability Radius corner design - to extend the life of fasteners Included in a heavy molded storage tray Fully guaranteedNo doubt, Sunex tools offer one of the most complete and toughest Impact Socket lines around.  This 1/2" drive, 6 point standard impact socket set is designed to tackle the toughest jobs with solid durability and keeps them pounding job after job.  Also each socket features a radius corner design, causing the socket to grab the sturdy wall of the fastener instead of grabbing the corners, resulting in less wear on the fastener. Set includes: 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 21mm, 22mm, 26mm and 27mm sockets.

Drive Medical SSP2 Features: -Powder coated silver vein steel frame. -Padded armrests. -Embossed nylon upholstery is durable, lightweight, attractive, and easy to clean. -Urethane tires mounted on composite wheel provides durability and low maintenance. -Comes with push to lock brakes. -8" front casters, adjustable in 3 positions. -Carry pocket on backrest provides additional convenience. -Comes with swing-away footrests or elevating leg rests with tool free length adjustable front riggings. -Plastic footplates. -Color: Silver Vein. Specifications: -Back height: 16". -Width seat: 16-20". -Depth seat: 16-20". Specifications Owner's Manual Optional accessories: -Skin Protection and Positioning 3" Foam Wheelchair Seat Cushion: Unique construction of high resilient (HR) molded foam provides... Less

Also known as: SK 4725, SK4725, SKT-4725, SKT4725; Features and Benefits: SuperKrome® finish provides long life and maximum corrosion resistance SureGrip® hex design drives the side of the fastener, not the corner Packaged in a secure and portable storage case Made in the U.S.A. Lifetime warranty25 piece set is made in the U.S.A., featuring SK’s high polish SuperKrome® finish, which protects the tools from the harsh working environments found in today’s workplace. Provides long life and maximum corrosion resistance. All sockets feature SK’s SureGrip® hex design, which drives the side of the fastener, not the corner, to avoid edge breakage which can occur on rusted or damaged fasteners when a traditional straight cornered hex tool is used. Set includes the SK SuperKrome® Professional... Less

High quality chro-moly alloy steel. GP High Torque Drive Socket design for increased strength with reduced chance of fastener rounding. Lifetime Warranty. Comes in a molded case. Molded cases feature removeable top for use as a tool box tray. 71 Piece Set Includes: 10 pcs. Fractional standard length: 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16" 10 pcs. Fractional deep length: 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16" 14 pcs. metric standard length: 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm 14 pcs. metric deep length: 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm 6 universal Fractional standard length: 1/4", 5/16", 3/8", 7/16", 1/2", 9/16" 6 universal metric standard length:... Less

Features and Benefits: Forged from the finest chrome molybdenum alloy steel – the best choice for strength and durability Radius corner design - to extend the life of fasteners Included in a heavy molded storage tray Fully guaranteedNo doubt, Sunex tools offer one of the most complete and toughest Impact Socket lines around.  This 1/2" drive, 6 point deep impact socket set is designed to tackle the toughest jobs with solid durability and keeps them pounding job after job.  Also each socket features a radius corner design, causing the socket to grab the sturdy wall of the fastener instead of grabbing the corners, resulting in less wear on the fastener. Set includes: 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 21mm, 22mm, 26mm and 27mm sockets.

1" Drive Air Impact Wrench 9" Long Shank/Anvil You are looking at a brand new in the factory box 1" drive air impact wrench.Features 1,800 foot pounds of max torque! Perfect for the lug nuts on semi-trucks or buses. Also handles farm equipment, tractors, and heavy equipment. Includes the adjustable torque dial, with forward and reverse operation. This is the long shank style with a large d-grip and side assist handle. Huge 9" anvil allows easy access wheel wells. Specifications Item Description

Set Screws are often used for holding a pulley, gear, or other parts from turning relative to a shaft. Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers. A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which... Less

Chrome vanadium steel with polished finished. Set Includes One Each: 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1-1/16", 1-1/8", 1-1/4". 10" quick release ratchet handle with snap on type. 5" extension bar, universal joint, 17" flex handle snap on type and blow case.

Chrome vanadium steel. Set Includes One Each: 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8". 5" extension bar (CR-V). 10" quick release ratchet handle with snap on type (CR-V), and blow case.

Drive Medical SSP1 Features: -Seat Size: 18" W x 16" D. -Powder coated silver vein steel frame. -Padded armrests. -Nylon upholstery is durable, lightweight, attractive, and easy to clean. -Urethane tires mounted on composite wheel provides durability and low maintenance. -Comes with push to lock brakes. -Carry pocket on backrest provides additional convenience. -Comes with swing-away footrests or elevating leg rests with tool free length adjustable front riggings. -Plastic footplates. -Color: Silver Vein. Optional accessories: -Skin Protection and Positioning 3" Foam Wheelchair Seat Cushion: Unique construction of high resilient (HR) molded foam provides optimum seat stabilization, positioning, pressure reduction and correct seating posture . -Deluxe Skin Protection and Positioning 3"... Less

8mm-to-28mm Socket-ratchet 25-piece Set : : (Toolusa)Here's Everything You Need In A Compact Socket Set. Includes 20 - 1/2" Sockets (8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22. 23. 24. 26. 27. 28mm); A 1/2" Dr.spark Plug Socket (21mm); A 1/2" X 5" Extension Bar; A 1/2" Dr Speeder Handle; A 1/2" Rachet Handle. Also Includes Handy Travel Case (15 3/4" X 7 1/4" X 1 3/4").

If you are looking for a professional quality 3/4" shallow impact SAE socket set, look no further. The GRIP Tools 21 piece 3/4" Shallow Impact SAE Socket Set is just what you need.  The GRIP impact socket sets are drop forged, heat treated, and built to exacting standards with chrome vandium steel. Chrome vanadium steel is used for many different types of tools because when heat-treated it has excellent properties such as strength, toughness, and resistance to wear and fatigue.  This set is perfect at home for those big projects, or in the shop doing the job that professionals require day in and day out.  You won't find a better deal than the GRIP Tools Impact Socket Sets. Included in this set:16 pc 3/4" drive sockets3/4" 7/8" 15/16" 1" 1 1/16" 1 1/8" 1 3/16" 1 1/4" 1 416" 1 2/8" 1... Less

Call Toll Free 1-866-513-5799, Mon-Fri 8-9, Sat and Sun 10-5 EST About Us Product Details Store Policy More In Mixed Tool Sets 14 Piece Mechanics Tool Sets -14 piece 3/4" drive standard mechanics tool set OUR SKU# ODK2732 MPN: 181-CTK14SAE Condition Brand New Shipping Free Shipping Leaves warehouse within 24 to 48 hours With a transit time of 1-5 business days Standard Ground (e.g. UPS, FedEx). Please note that this product cannot be shipped to Alaska, Hawaii, or Puerto Rico. We apologize for t

Socket Set, Number Of Pieces 30, Standard Length, Drive Size 1/2 In., Sae, Socket Type 12 Pt Std, 12 Pt Deep, Sockets Included 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 131/16, 7/8, 15/16, 1, 1-1/16, 1-1/8, 1-1/4 (standard) 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1, 1-1/16, 1-1/8, 1-1/4 (deep), Accessories Breaker Bar, 2 Extension 1/2 Dr, 10 In. And 5 In., Ratche 1/2 In., Nickle Chrome Finish

Chrome vanadium steel with polished finished. Set Includes One Each: 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1-1/16", 1-1/8", 1-1/4". 10" quick release ratchet handle with snap on type. 5" extension bar, universal joint, 17" flex handle snap on type and blow case.

Drive Adjustable Height Clamp on Tub Rail Durable, white powder-coated steel construction is attractive and easy-to-clean.14" - 17" Height Adjustment Handle design provides secure hand position.Width adjusts from 3" - 7".Stainless steel locking mechanism and non-wearing rubber pads provide scratch proof security.Fits most tubs (not for use with fiberglass tubs).Tool free installation. Attractive retail packaging. Limited Lifetime Warranty. Specifications: Adjustable Clamp (smallest): 3", Adjustabl

28 Piece 1/2" Drive Standard and Deep Fractional Impact Socket Set by Grey Pneumatic. Set includes: 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1-1/16", 1-1/8", 1-1/4" in standard and deep length, 1/2" x 1/2" universal joint and a 3" extension. Made of high quality steel. Engineered specifically for use with impact tools. UPS Ground for U.S. shipping and USPS Priority for International shipping. We also ship APO, FPO and do combine shipping. As always we appreciate your bu

1/4 x 2 Mushroom Split Drive Anchor Zinc (100) - The Split Drive Anchor is a one-piece anchor with a split-type expansion mechanism on the working end. As the anchor is driven into the hole, the expansion mechanism compresses and exerts force against the walls of the hole. This anchor can be installed in concrete, grout-filled block and stone. Made of heat-treated carbon steel and available in both zinc plated and mechanically galvanized finishes.

Wilson Tool 3 1/2" Die Set 3 Pieces 00190 QD 3.500 x 20501 3 1/2" STN Fab Punch 00212 QD 3.500 x 2.501 (+0.004) DIE 00192 QD 3.500 x 2.501 3 1/2" STN FAB STPR Guide NEW - NEVER USED Shipping and Handling: Free within the USA!!Combine orders to reduce shipping costs. Multiple auctions will be shipped together whenever possible. Orders are shipped via USPS unless otherwise requested. Most orders will be shipped within 24-48 hours after payment has been confirmed (weekends and holidays excluded).

1/2" Drive socket set by ProForge. They feature chrome vanadium steel that has been heat treated for strength. They are coated with the professional chrome finish that will not crack or chip. This set goes from 7/16" to 1-1/4", a heavy duty 1/2" drive ratchet is included. You also get two extensions, a long and short. 17 pieces total. The set comes in a nice steel carrying box, so you can put the set in your truck or tool box. This set is 100% LIFETIME GUARANTEED! If you break any piece in the set, it will be replaced! SKU: 2416G