07N3840

Formatted Capacity: 9.1GB Platform: Non-Machine Specific Mfr P N: 07N3220 Interface: 68-pin U160 SCSI WIDE Data Transfer Rates: 160MB s Average Seek Times: 4.9ms Be sure to choose the correct connnector! If you need an 8

The SMC AS elbow air flow control valve is made of polybutylene terephthalate (PBT) plastic and stainless steel 303 with a push-to-connect tube fitting on the inlet port and male National Pipe Taper (NPT) threads with sealant on the outlet port. The valve body is made of PBT for strength and light weight, and the internal metal parts are made of stainless steel 303 for greater resistance to corrosion than nickel-plated brass. This valve has NPT threads with polytetrafluoroet hylene (PTFE) sealant on the outlet for creating a tighter seal than straight threads, and the push-to-connect fitting on the inlet allows a one-touch connection to nylon, soft nylon, or polyurethane tubing. This valve is designed to be located upstream of the cylinder for meter-in control, and the knob provides ten... Less

Power screw bolt. One-piece screw bolt: no nuts and washers to assemble prior to installation. Heat treatment provides surface and core hardness. Heavy-duty mechanically galvanized finish available. Hardened, self-tapping threads feature a revolutionary undercutting design: allows for immediate load application, reduces required installation torque. Easier and faster installation than mechanical expansion anchors. Bolt size is hole size. Prepare hole with lower-cost ANSI B212.15 standard bit - no metric or off-size bits needed. Serrated head facilitates a positive lock between bolt and application surface for enhanced vibration resistance. Lower spacing and edge distance requirements than mechanical expansion anchors. Can be installed with an impact or socket wrench. Removable: ideal for... Less

Formatted Capacity: 18.3GB Platform: Non-Machine Specific Mfr P N: 07N6350 Interface: 68-pin U160 SCSI WIDE Data Transfer Rates: 160MB s Average Seek Times: 4.9ms

Vacuum Regulator, Port Type Tube, Port Size 1/4 In., Pressure Range -100 to -1.3 Kpa, Max. Flow Rate 140 LPM, Temp. Range 5 to 60 Degrees C, Length 55mm, Width 73mm, Height 83mm, Includes Bracket And Gauge

This SMC KQ2Y run tee is a PBT and nickel plated brass tube fitting for connecting a female thread to a straight tube and to a second tube at a 90-degree angle. It has male National Pipe Thread Taper (NPT) threads with fluororesin sealant on the straight end and push-to-connect metric tube connections on the straight and branch ends. The body is made of polybutylene terephthalate (PBT) and Japanese Industrial Standard (JIS) C3604 brass that is electroless nickel plated for corrosion resistance, the threads are made of nickel plated C3604 brass, and the tube seals are made of nitrile butadiene rubber (NBR) for resistance to oils and extreme temperatures. An NBR O-ring allows the body to rotate in the threaded stud for positioning. A chuck and collet provide secure retention of tubing, and... Less

This SMC KQ2H male adapter (also called connector) is a nickel plated brass tube fitting for connecting a tube to a female thread. It has a push-to-connect inch tube connection on one end and male National Pipe Thread Taper (NPT) threads with fluororesin sealant on the other end. The body and threads are made of Japanese Industrial Standard (JIS) C3604 brass that is electroless nickel plated for corrosion resistance, and the tube seal is made of nitrile butadiene rubber (NBR) for resistance to oils and extreme temperatures. A chuck and collet provide secure retention of tubing, and the release button allows tubing to be removed with little force. The fitting can be used with nylon, soft nylon, polyurethane, fluorinated ethylene propylene (FEP), and perfluoroalkoxy (PFA) tubing. It has an... Less

The SMC AS universal air flow control valve is made of polybutylene terephthalate (PBT) plastic and nickel-plated brass with male National Pipe Taper (NPT) threads on the inlet port and a push-to-connect tube fitting on the outlet port. The valve body is made of PBT for strength and light weight, and the internal metal parts are made of nickel-plated brass for resistance to corrosion. This valve has NPT threads with polytetrafluoroet hylene (PTFE) sealant on the inlet for creating a tighter seal than straight threads, and the push-to-connect fitting on the outlet allows a one-touch connection to nylon, soft nylon, or polyurethane tubing. This valve is designed to be located downstream of the cylinder for meter-out control, and the outlet can be swiveled to any angle for flexibility in... Less